HD2 end call key not working! - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi guys , had a weird problem with my end call/power button.
Out of no where my end call button stopped working. I've found its most annoying because i usually press it to turn the screen off ( lock the screen)
The button doesnt appear to be broken or anything and doesnt work when i press hard
I did a software factory reset this morning via the phone and the button started working again! but its gone 3 hours later again!
I havent recently installed anything and it appeared out of the blue... any help??!

Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.

kinda fixed it now, dont know how though, did a hard rest and formatted mem card, removed everything and didnt reinstall half the stuff i used to have inc all the cabs from here.
its working now on the new rom just fine, but its the first time its happened to me too, and i didnt even do anything !
try a hard reset and wipe and reinstall youre old cabs at ure own risk!

sl1200 said:
Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.
Click to expand...
Click to collapse
Same happens for me too, not all endkey, but my home key is started to work as call key, back and windows key started to work as volume up key.
I am really annoyed guys!! help me out guys!!

any solution mine too is not working since last night did hard rest but still no luck

Related

***HELP***

Well i need some get. this is not my 1st PPC since i have had thr 6700, titan and not the touch pro but i guess i dont know what im doing...
so i downloaded a few cabs, nothing big. i dont mess with a lot. got some themes, lumos, touch response etc.
i the problems started when i downloaded my last theme but im not 100 % sure that was what caused the problem. i did use advance config and change some things but nothing major, just some setting on the program that said "advised"
well, i had problems and i wanted to delete everything and start over but i couldnt delete a theme.
to make a story short, i was at the mall today and stopped by the sprint store to see if the tech could help me...
some how files got delete and from what i was told the tech couldnt even do a master reset!!! she couldnt figure it out... the phone works but its missing some things.
can i fix this? download a custom ROM? and use that?
i wouldnt think advance config can delete something, or a theme.... i dont know what i did but something happened.
any help would be great
thanks
hold power, down volume and ok button all while pushing the reset button. release the reset button but continue to hold the other three untill the phone reboots into the hard reset menu. hit the volume up button and tada bobs your uncle. if that doesnt work selet clear memory in the settings menu and follow the prompts
the sprint tech couldnt get it to work. she tired a master reset and nothing. they said files where missing.
she has the same phone and tired a lot of things
i dont get how i can erase files like this, i didnt mess with any files... the only thing i have done is download simple cabs
i did use advance config but once again i didnt delete anything. just selected what it said was best.
If I'm hearing you correctly you need to do a Hard Reset....
To do so there are two ways:
First way:
While phone is OFF, press volume down, cener d-pad, and power button until message comes on. Press volume up to complete.
Second way:
While phone is on, press volume down, center d-pad, and stylus-reset until message comes on
it wont do a hard reset
i have done it, sometimes it beeps... i get the htc logo and thats about it. i never get a message or anything, it just goes black like a soft reset
the only diff is that it wont show the sprint logo like when i have done a soft reset... it shows the htc logo
now im worried about downloading cabs. i never had this problem. and i didnt delete anything from the phone. so i dont know who those important files they say are missing got deleted.
the guy at the sprint store on base dialed ##786# and hit the call button, he says that will do a reset or something... and it wouldnt work
nothing else? no one else has a idea of what happened
this is my 3rd ppc and this is a 1st, it would be nice to know what could have cause this problem so i dont do it again.
you guys are no help
Have you tried flashing the ROM over on it? Will it connect to the computer via Activesync?
Mayonesa said:
it wont do a hard reset
the guy at the sprint store on base dialed ##786# and hit the call button, he says that will do a reset or something... and it wouldnt work
Click to expand...
Click to collapse
LMAO!! Now that's funny. The guy at the sprint store doesn't have a clue.
If you do ##786# on the Sprint phone, it should bring up a EPST screen. Which when you press menu, there is an option to reset it, however I doubt that does anything to solve your problem.
I would suggest, trying to flash the ROM back on the phone (if you haven't tried that already)
i have never connected the phone using activesync... i just got the phone like 2 weeks ago ( replaced my mogul)
i was thinking about trying that but havent done it for 2 reasons
1. i have never flashed a ROM
2. im getting a new TP, it has been ordered... if i get to keep the one i have now i will try to flash but i dont want to try it if i have to give up the phone. only to have to change it back
i do want to find out why this happened. like i said, i like to add themes and other programs i like but im worried about messing my new one and then ill be out of luck.

[Q] Vibrate function doesn't work anymore, hardware issue

My SGS2 stopped vibrating. Tried flashing, un-rooting, restoring stock and factory settings. None of these worked.
I am inclined to think that it is a hardware problem.
Has anyone else been dealing with issue? I read some posts on XDA regarding this matter but they were software related as opposed to hardware. Can anyone post instructions on how to fix it or provide any solutions for this issue?
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
UpInTheAir said:
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
Click to expand...
Click to collapse
Cannot get jig in Palestine. Bought the phone from the UK. Sending it back will be problematic. I will look for a repair shop.
Thanks for the quick reply
That's a "bummer" (bad luck). You could make a jig, but as you said that it would be problematic to return. Hope you can sort it easily. Sorry, can't think of anything of use right now.
Sent from my GT-I9100 using xda premium
hey there,
i got the same problem. no more vibrating at all. not with calls or notifications and not as haptic feedback. it started today (was still working in the morning), though i did not drop the phone or anything.
i am still hoping too find that it's a sw-problem. but all potential solutions i find do not help. so i guess i have to contact samsung.
but before i do that i have to get rid of all "hacking".
could you plz tell me what i have to do?
i have now cm9 20120402 nightly.
but i still have a cwm-recovery-backup of the original touchwiz (gingerbread).
-so first i make a backup of my current rom via cwm and of all my apps via titanium and store everything on my pc.
-i flash my touchwiz-backup
-i get one of those: http://www.amazon.de/s/ref=nb_sb_no...ld-keywords=Samsung+Galaxy+S2+USB+Jig&x=0&y=0 , plug it in, wait til its done and remove it again.
after that, samsung will never know i "messed" with the phone??
or do i have to consider/do something else?
tyvm!!
kws
I have the same issue.
When I was on my stock 2.3.5, I found a workaround:
- go into test mode (dial *#0*#)
- find the vibrate button, when you press it, it shouldn't work like you expect
- go back
- plug in your headphones and push the cable a bit to the left
- test vibrate again - this time it should work
- pull the cable out while vibrating, still pushed to the left, vibrations should stay on
I know it sounds crazy but it seems the hardware part that controls the vibrations is near to the jack port - excessive use of headphones, like it was case, must have damaged it somehow.
However, now I'm on CM9, so no test mode for me, I'm achieving the same effect by bashing the back button, so I get semi-constant vibration. I know, It's ridiculous.
Have the same problem here, I think it's software related because the shut down vibration stopped working when I flashed CM9 ICS, I can't remember if it was working anywhere else though. But now I'm back to 2.3.5 and it's not working at all. Did a Factory Reset, Cleaned Cache before and after the flash. Also used the Jig to reset my counter. Any clues?
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
dajomas said:
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
Click to expand...
Click to collapse
I saw something similar on CM9 thread, they said it could be a "bad flash", not a corrupted rom but the lack of proper cleanup before and after the flash. But I cleaned up everything before and after and I don't like reconfiguring the whole phone again for nothing.
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
kweso said:
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
Click to expand...
Click to collapse
I assume since your posting in xda developers that you are rooted?
If so, just back up data with titanium backup app and factory reset, setup system and then restore USER apps and data only.
Sent from my GT-I9300 using xda premium
kweso said:
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
Click to expand...
Click to collapse
Did you install another rom?
My vibration for example didn't work with some cm10.1 nightlies
it started in cm10.1 20130203. then i tried wipe cache and dalvik. nothing. then i updated to 0206 (wiped cache and dalvik again) > still nothing. went to bed. got up. everything ok! its vibration again! i am 100% sure, it did not work, when i left it on my desk last night. this morning, i checked for missed calls and it took a moment until i realized: i got haptik feedback back on patternunlock and keystrokes! checked ringtone-vibration: fine as well!
dont ask me how! would still like to know for myself.
thx,
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
call me stupid!
suddenly this evening my phone stopped vibrating again. then i realized: quiet hours! i turned off haptik feedback at night.
could slap myself. at least ill find this thread again, next time i screw it again....
nite,
kws...
...tapatalking
Girls can use it again then. Good news for them!
Sent from the little guy

GT-7510 Random "locks" and hangs at restart

Reaching to the XDA family to help me troubleshoot strange issues with my 10.1 WiFi Tab. Starting a couple of months back the tablet hold not come on once i was pressing the power button and I had to hard reboot to getting back on.
I assumed that it's the power management and I turned it off, but the problem persisted. The I could see that it started to hang at the Samsung animation screen with the sound blocking like a bad CD.
I've run a hard reset cleared cache but the problem still present. It's running stock 4.0.4, was never rooted or custom ROM on it since new.
I don't really know what to do next and I'm looking for pointers.
Thanks for any help.
yulasinio said:
Reaching to the XDA family to help me troubleshoot strange issues with my 10.1 WiFi Tab. Starting a couple of months back the tablet hold not come on once i was pressing the power button and I had to hard reboot to getting back on.
I assumed that it's the power management and I turned it off, but the problem persisted. The I could see that it started to hang at the Samsung animation screen with the sound blocking like a bad CD.
I've run a hard reset cleared cache but the problem still present. It's running stock 4.0.4, was never rooted or custom ROM on it since new.
I don't really know what to do next and I'm looking for pointers.
Thanks for any help.
Click to expand...
Click to collapse
If u have cleared ur sdcard ( wiped it clean ) and are still having these issues...it could be power button related...
I would look and make sure the power button is not sticking...then after that. Make sure you don't have anything corrupted on you're sdcard.
If none of this works....I would root and flash a newer tw based ROM..
Let me know if u need help..
Thanks for your response Gil81. When I performed the factory reset or wiped the scard clean. The button it's not sticky and it function properly.
I'm thinking it might be battery related but not sure.
Any good rom's that you recommend?
Sent from my Nexus 4 using Tapatalk

Need help with my S6 edge back button

Hello Everyone
I have a small issue with my S6 basically what it is that the Recent apps and back button do the same thing open Recent apps. I have a look online everyone says its a software issue but i done everything Hard, Soft, Factory reset and still same. So now I know that its not software it will be the hardware. Maybe any one know witch part of the phone is responsible for the back button functions and would I be able to replace it? Without replacing the phone?
I tried to replace the one of the boards of the phone( the one that has charging port headphone jack and sothing else) but that didn't help. I cant get phone in for the warranty do to i have voided KNOX .
So any ideas would help.
Thank you all
:good:
Acutally this is software. There is a file in the system that controls what those buttons to. You can try and flash your firmware via odin to see if that fixes the issue.
Sent from my SM-G925P using Tapatalk
I have tryed that several times did not help. Everything same
You cold try remapping the buttons with the all in one gestures app.
I have tryed remap dose not help do to i tooks like that back button thinks that it is a recent apps button
Root your device use xposed and gravity box maybe fix.
If still problem use custom kernel like arter97.
sarys693 said:
Hello Everyone
I have a small issue with my S6 basically what it is that the Recent apps and back button do the same thing open Recent apps. I have a look online everyone says its a software issue but i done everything Hard, Soft, Factory reset and still same. So now I know that its not software it will be the hardware. Maybe any one know witch part of the phone is responsible for the back button functions and would I be able to replace it? Without replacing the phone?
I tried to replace the one of the boards of the phone( the one that has charging port headphone jack and sothing else) but that didn't help. I cant get phone in for the warranty do to i have voided KNOX .
So any ideas would help.
Thank you all
:good:
Click to expand...
Click to collapse
Same problem here!
Back button thinks is recent apps , sometimes work sometimes not , think is an software bug or something.
The problem started after android 6 update.
Downgrade to 5.1.1 dont make a difference.
Some ideas to solve that?
I'm having the exact same issue with mine. Have a solution yet? Cleared cache, checked safe mode and factory reset. Same issue.
No still did not fix it. But i havent tryed the mehdips3 solution do to dont know how to do it
Sent from my SM-G925F using XDA-Developers mobile app
I've tryed the mehdips3 solution, is not working........................................
any other solutins?
I dont know anything else it seams that nothing is working. Im thinking to change the phone. Disapointed in samsung big time
Sent from my SM-G925F using XDA-Developers mobile app
Mine was different. Back button was working but recent button suddenly not working. But i already change my front glass and after few days those button failed to operate. Now stuck using onscreen float button.
Hi, I have the same problem with te back key. What solved problem for me was installing the app called ,, all in one gestures'' ( free on the market),
in the app, go to the ,, hard keys'' , enable de the app from te accesability tab, at the back key tab select single tap and select the ,, back '' from the submenu.
Hope works for you guys !
Regards !

Sofkeys autopress !

1. Softkeys ( Menu and Home ) starting to auto-press today suddenly for no reason. Before you ask , I don't droped my phone or any type of shock !
2. After some time sofkeys ( Menu and Home ) stop working at all ! They don't even light out if I'm trying to press them... Although the 'Back' key is working perfectly fine.. :/
These problem solve magically after one restart but after few minutes they still persist ! Sometimes working fine , sometimes autopressing or not working at all and after a while working again.. :/
Anyone else had this problem too or know how to fix it ? ( if it's even possible to fix )
P.S. I don't think that's an Software problem , I think that's an Hardware problem tho...
EDIT : My 'Menu' and 'Home' buttons are officially dead now... R.I.P. !
I have the same problem... After updatee from 7.1.3 to 7.5.1 and to 8.0.1. I tried with custom ROM, with stop Tapatalk... But without success. I tried also with another launcher and they start to work for only 10 minutes.. tried also with wipe cache! This is very big problem
ZinovievBG said:
I have the same problem... After updatee from 7.1.3 to 7.5.1 and to 8.0.1. I tried with custom ROM, with stop Tapatalk... But without success. I tried also with another launcher and they start to work for only 10 minutes.. tried also with wipe cache! This is very big problem
Click to expand...
Click to collapse
That's not a Software problem , that's a Hardware problem...
In my case all started yesterday... Menu and Home keys started to autopress/not working and until night they stopped working at all , completely dead ! That happened suddenly , I never had that problem or have dropped my phone , never !
Also I read that many Xiaomi have this problem including Redmi Note 3 and even Mi5
R.I.P. Soft keys !
Now they work again after whole day that they don't worked at all now suddenly starting to autopress again and works pressing them :/ They worked again ( including autopressing ) just for few minutes and then not working again..
I'm starting not to understand this device at all !
Gyovany96 said:
Now they work again after whole day that they don't worked at all now suddenly starting to autopress again and works pressing them :/ They worked again ( including autopressing ) just for few minutes and then not working again..
I'm starting not to understand this device at all !
Click to expand...
Click to collapse
Acutally it's software problem... I'm sure because when i deinstall Taptalck updates, they start work correctly for around 15-40 minutes. After that they just died. After install new launcher (from Gplay) they start to work again. So im pretty sure that, this is software problem... But from MIUI dont care about our problems
ZinovievBG said:
Acutally it's software problem... I'm sure because when i deinstall Taptalck updates, they start work correctly for around 15-40 minutes. After that they just died. After install new launcher (from Gplay) they start to work again. So im pretty sure that, this is software problem... But from MIUI dont care about our problems
Click to expand...
Click to collapse
I don't know... I'm using exactly the same apps like always , never had that problem ever with any ROM... Last night I flashed Stable 8.0.2.0 , they worked for few minutes and then dead again !
I still think that's an Hardware problem , but I really hope I'm wrong and you're right to be a Software problem..
If was harfwer problem, when we make clean instal, we sshould have the same problem without any reaction of the button...
ZinovievBG said:
If was harfwer problem, when we make clean instal, we sshould have the same problem without any reaction of the button...
Click to expand...
Click to collapse
That's exactly what I have..
Gyovany96 said:
That's exactly what I have..
Click to expand...
Click to collapse
Yeah.. but my keys today start to work again.. and again stopped 2 times. Now work correctly. I think it's software problem
ZinovievBG said:
Yeah.. but my keys today start to work again.. and again stopped 2 times. Now work correctly. I think it's software problem
Click to expand...
Click to collapse
Exactly same problem for me. Sometimes it start to work ( very rare ) or auto press but I disabled Menu and Home buttons because it's annoying to get out of app because autopress.. Have you tried to flash latest fastboot ROM ? If it's from software that should solve it..
Or this problem its in the kernel of Miui... I dont know, how to check. But i buy new display, and nie im waiting for it. When i change My display will text you
ZinovievBG said:
Or this problem its in the kernel of Miui... I dont know, how to check. But i buy new display, and nie im waiting for it. When i change My display will text you
Click to expand...
Click to collapse
I thought buying new LCD too but it takes too long to deliver and I read some bad reviews about them : not original , dead pixels , crash during transport , etc. I'm thinking buying a new device maybe...
Anyway I'm really curious about your new LCD , so please tell me when it arrive and how it works :fingers-crossed:
Btw you bought just the LCD or LCD+frame ?
Gyovany96 said:
I thought buying new LCD too but it takes too long to deliver and I read some bad reviews about them : not original , dead pixels , crash during transport , etc. I'm thinking buying a new device maybe...
Anyway I'm really curious about your new LCD , so please tell me when it arrive and how it works :fingers-crossed:
Btw you bought just the LCD or LCD+frame ?
Click to expand...
Click to collapse
Only Display, i will text you when i finish with rhe display
I had the same problem. If you are using custom rom, you can activate on screen home button and disable softkeys, this may help for a while.
But it still will make some phantom touch on your screen. Finally I sent to repair and they changed another screen for me
Hello dear friend! I changed my display... And now everything is good. Buttons work properly. And I have good news for you. I just finished with one test: I put the old screen again on the phone and now the buttons work again... I just heating up the display when I was removed the old screen. U can try to heat up your phone on the button of the screen with hairdryer gently. Or just disassembly your phone and assembly again if u have any questions I'm here
@vetefan I already disabled Home and Menu buttons because it was really annoying to always get out of apps suddenly without pressing anything !
@ZinovievBG Hey mate ! Few weeks ago I opened my device to clear dust in front camera and also I cleared everything in it including a bit display stuff ( you can't really clean too much display because it's one piece ). I'll try heating soft buttons with hairdryer and see if it works. One question : this heating solved the problem definitely or just for a temporary period ?
Gyovany96 said:
@vetefan I already disabled Home and Menu buttons because it was really annoying to always get out of apps suddenly without pressing anything !
@ZinovievBG Hey mate ! Few weeks ago I opened my device to clear dust in front camera and also I cleared everything in it including a bit display stuff ( you can't really clean too much display because it's one piece ). I'll try heating soft buttons with hairdryer and see if it works. One question : this heating solved the problem definitely or just for a temporary period ?
Click to expand...
Click to collapse
Im not sure about that. I just checked for around 20 minutÄ™ and everything was ok. Today i will put again the old screeny and will told you

Categories

Resources