hi! i was just wondering if anybody knew a way of getting messenger to connect over a lan, or internet explorer to connect over a lan? i have my xda setup to connect via gprs, but not as a standard connection. so whenever i try to use IE or messenger it doesnt recognise the connection. i can get the ezwap to work, because i could change the setting on it to connect over a lan, but i cant find anywhere to change the others.
thanks
Go into active-sync on your PC. (I assume you mean using you PC LAN). Then go into options -> Rules.
In Pass through, choose Connection: The Internet.
This should do what you want.
basically what it is is, im using a seperate dial up connection via gprs which IE and messenger dont recognise and dont think theres a connection. can i change the settings in the registry to get them to only connect via a lan, i.e. piggy backing over the connection i have.
thanks
How did you get yours working with ISP, I have made number of trials. No, luck et all. I can not internet/isp/gprs working. By the way I am on another network than I originally purchased. So neither of them giving any support.
Thanks.
sometimes you have to reconnect in to the cradle to get it working
Hi
I update my cingular / att 8525 with the new rom that replace the wireless modem with the internet sharing. The internet sharing worked fine.
Some time when my home high speed internet goes slowly, I use my 8525 as a wireless modem to connect to my work computer via Cisco VPN version 3.66.
After upgrade to the new rom that uses internet sharing, I cannot connect to my work computer as before the upgrade. As soon I run the VPN Client, and the VPN do all registration, I not longer have internet access. When I run Remote Desktop to connect to my work computer, I got an error that I can't find the computer. If I open the internet explorer (IE) to go any site, the IE can not find any size. If I disconnect the VPN connection and repair the internet sharing I can browse the internet.
I contact the HTC support with not result. I want to know if someone that has not upgrade the rom yet, can send me the wmodem files from the windoew directory to see if I can get the wireless modem working or if some one has any correction options.
Regards,
Gilberto Fres
The latest Cisco VPN client (v5.0) fixes this.
I installed the Cisco VPN version 5 in work computer to test. I disconnect from the network and create a bluetooth connection between my 8525 and the PC. I got internet access thru the phone. I launch the VPN and the VPN connect to the network. I check for internet access and was still there. The only problem is that when I ping any computer in my work network, I dont get any reply. I still can't connect to any computer in my work network, but this time with this new version of VPN, I'm not losing the internet.
If posible to get the WModem software that is the wireless modem instead of internet sharing?
Regards
Gilberto Fres
Sounds like a bug that was in the Beta v5.0 client. Are you connecting to a Cisco VPN concentrator? I'm using a 3020 w/o issues on the production client (has official Vista support).
My laptop runs Windows XP however..
gilfres said:
I installed the Cisco VPN version 5 in work computer to test. I disconnect from the network and create a bluetooth connection between my 8525 and the PC. I got internet access thru the phone. I launch the VPN and the VPN connect to the network. I check for internet access and was still there. The only problem is that when I ping any computer in my work network, I dont get any reply. I still can't connect to any computer in my work network, but this time with this new version of VPN, I'm not losing the internet.
If posible to get the WModem software that is the wireless modem instead of internet sharing?
Regards
Gilberto Fres
Click to expand...
Click to collapse
Possibly because DNS isn't working thru the VPN client? Can you ping or RDP by IP address?
Or, do the hard coded proxy settings affect VPN? Have you tried disabling the proxy?
Hi
The version of the Cisco VPN is 5.0.00.0340. I'm connecting to cisco 3000 server. If I trying to ping any computer on my work network after the VPN connect, gave me time out all the time, but I could connect to the internet using the Internet Explorer.
Playing with this yerterday, in the control > network connection, I pick the property of the connection made by the 8525. I went to the properties. In the Advanced tab I click the option "Internet Connection Sharing" to see if the VPN work and I received a message that the connection to the internet can be lost. I lost the connection and went back to the property dialog box. When I click the Advanced tab, the all "Internet Connection Sharing" section not longer showing up in the "Advanced" tab.
Right now the phone connect to the PC, but I don't have any internet in the PC. How I can disabled this "Intenet Connection Sharing" when this doesn't show up in the Advanced tab of the network connection properties?
Regards
Gilberto Fres
I've got the AKU3.5 ROM loaded on my 8525 but I've not tested the Cisco VPN client with it. My responses have been based on my TyTN which runs my WM6 ROM. I'll pair up my laptop with the 8525 later today and test.
Sleuth255
Did you test your 8525 with the Cisco VPN Client?
Gilberto
Forgot about it.... I'll be home in 2hrs & will test then.
also: are you tethering via USB or Bluetooth?
Testing complete. Tethered my laptop to my 8525 using USB. Connected to my 3020 concentrator with Cisco VPN client v5.0.00.340, logged in and successfully browsed to our internal-only (RFC1918 CIDR block) intranet portal site.
I am using IPSec over UDP (NAT/PAT).
Looks like the 8525 Internet Sharing/v5.0.00.340 client combination works for me.
Sleuth255
Our company concentrator is the 3000 not the 3020 that you use for the test.
Look like I have to wait to HTC release the update to WM6 and lockely if the will include the DUN package in the update.
I got the VPN connect but can't sent and received any package thru the VPN. I still have internet browsing capability, but I can't ping any computer in my work network.
Thank Sleuth255 for your information.
Gilberto
are you also IPSec over UDP?
hey all, does anyone know if there are any free/opensource vpn client WM5/WM6 software? I've tried Antha and Bluefire VPN. I had great success with Bluefire VPN but a license costs $79. Antha was just a bit too unstable.
Any recommendations?
I'm not aware of any that can do 3DES other than the two you mentioned. Let me know if you find one!
Sleuth255
Yes is IPSec over UDP.
Gilberto
can your shar VPN software?
Sleuth255 said:
The latest Cisco VPN client (v5.0) fixes this.
Click to expand...
Click to collapse
Can you post a link to vpn software? and more information that you have.
Hi everybody, i have the next issue:
I can connect HTC HD2 to wireless network with wpa tkip encryption , but i cannot browse internet, download, and the youtube player shows the videos list but doesnt play them. It is very frustrating... i tried to find a solution but didnt find find anything.
Tried the things with Network connects Work/Internet and other ones but did not work.
Does anyone knows how to solve it, or what settings should i use?
thanks
Uhm the problem you experiencing is not related to the HD2
You need to edit you internet router configuration of your internet connection (at home).
Some were there is a setting called Mac Client filtering. If your Mac adres of the wifi adapter of your HD2 isnt showing in the list and having the status "accepted" you can make netwerk connection but the router is blocking your internet connection.
Adjusting the Mac list of your internet router will fix this.
Hi,
i don't know if this is the correct board but I am searching for something like a WiFi Manager.
My Problem: Usually, I am using only my home network via Wifi and if I am on the road, i am using my mobile data plan. At my university there are some rooms, where i cant receive any mobile data connection. The only possibility to connect to the internet is via WPA2 WiFi but if I enter the settings for this network it also connects to this network any time I am in range of it (so when i am traveling through the city, it allways switches on an off and I dont get a stable connection.
Entering and deleting the university wifi anytime is a bit ugly so I am searching for a possibility, how I could enter my university-WLAN-Information but enable this network only, when I need it.
Thanks in advance,
Cmoe
try market from your phone or market.android.com and search for wifi manager ... it is app I use, but there is lot more apps ...
Hi,
I have HTC Mozart, OS ver. 7.10.8107.79, and have problem with Internet sharing over wifi to my iPad.
I successfully set up Internet sharing and connect my tablet to my phone and everything seems fine, but when I try to enter any web page on iPad I get error 504 bad gateway in my browser. On the same time I can use Internet explorer on Mozart, so I'm sure that I hv Internet connection. I would check for updates, but I'm in train at the moment, and need tethering right now :/ anyone knows the solution?