Bangsters V1.5 (CM6) Froyo Theme
AXI + NOAXI + EVO | RMNET + PPP | BRUT MAPS
Highlights:
- WIFI Tethering/Hotspot! Works flawless with RMNET, for PPP need to run a script
- USB Mass Storage
- Cyanogen CM6 latest nightly
- Change Internet, DPI and Data Image size from startup.txt
- led light and keypad lights
- GPS fixed
- Bluetooth fixed (supposedly, please test and confirm)
- Michyprima RC11 Normal with AXI and NON AXI, or EVO zImage (easily switch between the three via startup.txt, or even use your own)
- added BRUT MAPS
- updated to latest launcherpro and ADW Launcher
- GPS Zone easily configurable via startup.txt as well
I'm releasing this build which I use daily. It's now V1.5 as it is a stable build suited for daily use. This is a standard froyo theme (2.2) with adjustable dpi settings and adjustable data image size from startup.txt. It is also using the latest R11 zImages from MichyPrima and Evo zImages. Simply switch via editing startup.txt
Note: Previous users of RC1.0/1.1 please wipe everything and reinstall as I changed a lot.... I went the route of everyone else with a system.ext2 file system instead of htcleo_update.tar.gz... this makes it easier to reinstall build as you only have to delete data.img.
To upgrade from previous version while keeping your data intact:
Previous users of V1/V1.1,1.2,1.3, you can just copy over the system.ext2, rootfs.img, and root folder as well as the other folders, and leave your data.img so that you get to keep your settings.
Some features:
CM6 Nightly 9/19/2010 build
180 dpi or 240dpi, easily change from startup.txt - more icons in screen when combined with ADW Launcher
Includes ADW Launcher and LauncherPro
Following Working: Camera w/ Flash, Camcorder, GPS (USA default), 3G, Wifi, WIFI Tethering/Hotspot, Flashlight with 180dpi, LED, Keypad Lights, USB Mass Storage
Froyo Default Theme, FRG33
UserData adjustable. Just make the changes in startup.txt before first boot! Will take some time on first boot due to size of data image being created.
choose from different zImages. Just make the changes in startup.txt to choose between MichyPrima's R11 AXI, NOAXI, and EVO.
Need to Test:
Not sure - Bluetooth (someone has to test since I have no BT headset to test with)
Again, I'm releasing this since I use it. Use if you want to at your own risk (don't worry it won't brick your phone)
I'm using this build with ChuckyDroid Rom (with FD DriodBoot cooked in) and radio 2.12.50 without any issues.
NOTE:
Thanks to all those who have donated. If you want me to put your name here, please PM me and with the paypal code.
louie317, ktran1588, partie, bler, Uglymittens, and others whom I don't know their userids yet so i can't post here
-----------
If you're feeling generous feel free to donate
Latest Version Download: 1.5 Uploaded 10.09.2010
DOWNLOAD HERE VIA MULTIUPLOAD (1.5)
NETWORK SWITCHER SCRIPT (switch between RMNET and PPP script for GScript)
Download this and extract to gscript folder in the root of the sdcard (outside of Android folder!). Then go to GScript and load the script. This file is already in V1.4 download.
Warning! Read everything before you make any modifications to the files.
#be careful when editing the settings.
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us"
boot
AVAILABLE OPTIONS FOR STARTUP.TXT:
# conn_type: ppp,rmnet
# kernel_type: axi, noaxi, evo, custom
# gps_zone: us, europe, etc (pls check your zone based on pool.ntp.org
# lcd_res: any variable from 140 to 240, my default is 180, Froyo default is 240
# data_size: 2048 for 2GB, 1024 for 1GB, 512 for 512MB
# rel_path: Android. Be careful when changing this. this is the android folder in the sdcard
If you are having issues booting, try editing startup.txt and change set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us" to "set cmdline rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us loop_partition=mmcblk0""
Instructions on setting Data Image Size, setting DPI resolution, changing between PPP/RMNET, changing GPS ZONE, using AXI/NOAXI/EVO or your own zImage:
Before running Android for the first time (or if you want to change the data image, then just delete your existing data.img file), edit startup.txt and look for the line
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us"
Change that line to adjust your desired data image size, screen resolution, and to switch between RMNET/PPP.
How to change Data Image:
change this: data_size=2048
2048 = 2GB, 1024 = 1GB, 512 = 512MB
Example. to have 1GB image size set it to 1024, for 2GB set it to 2048. 512MB put 512. Default is set to 512.
Change Screen Resolution:
To change the DPI easily via startup.txt, edit the variable that says dpi_res = 180 and change it according to your preference. Set it to 240 to have default resolution.
To switch between PPP/RMNET:
To switch between RMNET and PPP, change this variable, conn_type=ppp in startup.txt. Options are ppp and rmnet. You don't have to replace any file or anything, just this variable
Note: In PPP mode, WIFI router needs to run a script to fix the iptables (thanks Warrenb). In the Android folder, there is a file, ppp_wifi_router.sh. You need to run that everytime you activate WIFI Router. You can run it two ways:
1. Open the file in terminal.
2. Copy the contents of that file to G-Scripts so it's one click from Home screen
WARNING! If you are switching zImages, make sure that the zImage supports both RMNET and PPP if you want both. IF NOT, then MAKE SURE that the setting in startup.txt is the same! Example: Evo based kernels are PPP only, so makesure startup.txt says ppp.
To switch between AXI, NOAXI, and uploading your own zImge READ THIS!!
In startup.txt look at this line:
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us"
the kernel_type=axi specifies to dynamically load the AXI kernel. If this does not work for you, change axi to noaxi. then reboot.
If you want to use your own zImage, change axi to custom, then upload your own zImage into the Android folder. Also upload the equivalent modules with it. If you do not set this to custom, whatever zImage you copy to the Android folder will be replaced.
Also I included Power Control Plus by accident. It is a paid app and will not run without license. Either buy the license in market or just uninstall it.
To Set GPS ZONE:
In startup.txt:
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us"
Change the part that says gps_zone=us. If it's europe, change it to europe. It can be anything before the xxxxxx.pool.ntp.org. US is us.pool.ntp.org (hence I put "us"). For europe it europe.pool.ntp.org (hence I put "europe"), and so forth....
Refer to pool.ntp.org for this.
For those having Issues Sending MMS:
Adjust the APN settings (below is for TMO US) Leave the other fields the way they are and only change these fields!
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (if you have this)
MCC: 310
MNC: 260
APN Type: default,supl,mms
If you have a different carrier, boot into WINMO and get the APN settings for MMS, then plug them into your Andoird Settings.
Please go through this Checklist:
1. Format SDCARD, NOT Quick Format but Full Format, use 32K block size (THIS IS VERY IMPORTANT)
2. Switch to Chuckydroid Rom
3. Switch to 2.10.50_26 radio (especially if using TMO USA)
4. Re-download the build
5. Do not change the settings of startup.txt and boot it (for testing purposes as that default setting is what I use I have no issues whatsoever)
6. download setcpu and set for Interactive Governor
7. Go to Spare Parts and speed up transitions, and disable compatibility mode
8. For those having Issues Sending MMS adjust APN settings and use settings above for TMO US. If you have a different carrier, boot into WINMO and get the APN settings for MMS, then plug them into your Andoird Settings.
If something still is wrong after this I'll be puzzled myself.....
I was just able to use GPS, Wifi Tethering, Phone Call, send a 5MB email all at the same time while going home from Philadelphia yesterday. Search this thread for the word Sonic to see that post.)
Changelog:
V1.5
- Further changes to rootfs
- updated to latest Nightly
- fixed minor bugs
V1.4
- Totally reworked rootfs.img script on how startup options are handled. Should be working better than 1.3 and 1.3a
- Added option to choose EVO zImage via startup.txt
- updated to latest Nightly
- fixed some bugs (wallpaper, etc)
- more changes
V1.3a patch
- reworked script how startup.txt is processed.
V1.3a
- Re-Added LauncherPro (latest version)
- Updated ADW Launcher to latest
- Installed BRUT Maps
- modification in startup.txt
- GPS Zone now configured via startup.txt
- Included both AXI and NON AXI kernel from MichyPrima. To switch, easily change from startup.txt.
- replaced led light driver for battery issues
- some minor stuff...
V1.3
- fixed Bluetooth. Now it does data transfer between a MAc/PC and the HD2. For BT calls, someone has to check and confirm, since I don't have any BT headset (If you want, donate so I can buy one)
- Modified startup. Now takes in variables for screen resolution, data image size, and RMNET/PPP
- Easily switch between RMNET/PPP without replacing any files... just edit startup.txt then reboot.
- Uses MichyPrima's R11 Normal Kernel with both AXI/NOAXI
- some minor fixes for stability and speed
NOTE: I tried installing brut maps but didn't get to test it. I'll fix this soon for 1.3A
V1.2a
- fixed browser related issue (broswer FC, Facebook, Zedge)
- fixed wifi router bug
V1.2
- CM6 Nightly FRG33 (9/5/2010 buiid)
- Improved performance, speed, and stability
- Adjusted some widget to 35% transparency (News and Weather)
- Bluetooth update (please confirm since I don't have any BT devices)
V1.1
- Fixed GPS
- Minor changes on default apps
- Superuser updated to latest version
- removed Amazon MP3 app from default
- Bluetooth update (please confirm since I don't have any BT devices)
V1.00
Initial Non RC Release
RC 1.1
Camera fix
RC 1.0
Build preview for beta testing
Yupppiieee..!!!
Thanks..!!!
Link please for "Download"..!!!
Cant wait to beta test ......you might want to put a donate to paypal link in your sig
bangsters said:
Download here:
MEGAUPLOAD: http://www.megaupload.com/?d=WO6TH14M
Click to expand...
Click to collapse
Downloadin now..!!!
Will keep you updated..!!!
Thanks, really appreciate your hard work & also of all the other DEV's on XDA..!!!
XDA rocks & you are the 1's responsible..!!
thx bro. downloading now.
also i second adding the donation link. i cant figure out how to make my own roms, so hey why not send a beer your way.
/cheers
i need a 1gb data file. can you post a fix for that.
edit1: dont forget for bootup issues add:
set cmdline "rel_path=Android loop_partition=mmcblk0"
edit2: data on att connects but does not function at all (this is in edge mode) during the intial setup wizard. otherwise so far only the edge icon doesn't not animate.
songokussm said:
thx bro. downloading now.
also i second adding the donation link. i cant figure out how to make my own roms, so hey why not send a beer your way.
/cheers
i need a 1gb data file. can you post a fix for that.
Click to expand...
Click to collapse
i'll post the 1GB file and other upgrades, and mirrors later.... jsut tried to do this as soon as possible so you guys can get it.
i'll polish the build later.... reuploading....
i think guys we became leo android addictors its 6 am here in lebanon and im refreshing android development thread regularly to catch any new work downloading now for testing thanks Bangsters for the hard work you rock
Thanx a lot bangster will report back after test.
thx working good
just change with that in statup.txt
set cmdline "rel_path=Android loop_partition=mmcblk0"
Can you post what's working and what's not please and I will donation also
I am wondering about this rom. No idea what it is, and do leds work?
wawa144st said:
Can you post what's working and what's not please and I will donation also
Click to expand...
Click to collapse
the whats working stuff is in the readme when u download the file.
itsedstech said:
the whats working stuff is in the readme when u download the file.
Click to expand...
Click to collapse
Thanks but I'm not home yet just was wondering what's working and what's not that's usually what they post when they post a build that's why
wawa144st said:
Thanks but I'm not home yet just was wondering what's working and what's not that's usually what they post when they post a build that's why
Click to expand...
Click to collapse
oh sorry well heres what the readme says
Whats working:
- Wifi
- GPS
- 3G
- Camera with flash
- Bluetooth
- Everything thats working on other builds
itsedstech said:
the whats working stuff is in the readme when u download the file.
Click to expand...
Click to collapse
itsedstech said:
oh sorry well heres what the readme says
Whats working:
- Wifi
- GPS
- 3G
- Camera with flash
- Bluetooth
- Everything thats working on other builds
Click to expand...
Click to collapse
Thanks alot and what's not please
itsedstech said:
- Everything thats working on other builds
Click to expand...
Click to collapse
they all say that but then i try a new one and leds arent working.
Booting now! Looks sweet with the higher res
Randy Couture just wooped the floor with Tony lol.... 1st round TKO.....
now waiting for main fight with BJ Penn... then off to more changes on the build
Please be patient. this is the best I can come up with in 2+ hours.
Flashed Looks AAAAaaaAAwwwwEEeSSSoooMMeeee..!!!l
Thanks a lot once again..!!!
Even a good QUAD score, I got 1389..!!!
Screen shots anyone?
Maybe I'm missing something, but how is the dpi higher than other roms? Isn't that a hardware restriction based on the screen?
Related
[Jan. 1, 2011]: NexusHD2-Froyo V1.9a NAND version (RMNET) is out!
Please visit here. http://forum.xda-developers.com/showthread.php?t=895059
Click to expand...
Click to collapse
If you would like to use a SD version, please read and download V1.8 below.
V1.8 is the final SD version.
If you would like to boot this SD version with magldr, you can replace with a new rootfs.img which is patched by nzxtneo.
NexusHD2-FRG83D V1.8 SD version (PPP + RMNET)
This is the latest, fastest, stable and clean *stock* Android build for HTC HD2.
This build includes Google Nexus One's OTA update (FRG83D - Android/Froyo 2.2.1). (released on Nov. 18, 2010)
Quadrent score is about 1866 when using a sync file system.
Complete backup website (Find the older versions in the link below):
Mod edit: Link removed
The default kernel is hastarin r8.5.3_oldcam, please visit his post below for more information:
http://forum.xda-developers.com/showthread.php?t=787588
Release Notes:
"Stock" build except blocking ads (hosts file is replaced) and adding "H" (HSDPA) icon and battery % icon
By default it is hastarin's EVO based kernel (support for PPP), but you can switch to N1 based kernel (support for RMNET) easily.
Switch to RMNET by executing "conn_RMNET_with_michyprima_R11_AXI.sh" or "conn_RMNET_with_huanyu_HAVS-BFQ-OC-UV-AXI_925mv-0.1.d-n1.sh" in the GScript folder and then reboot.
Switch to PPP by executing "conn_PPP_with_hastarin_r8.5.3_oldcam.sh" or "conn_PPP_with_hastarin_r8.5.3_eb_oldcam.sh" in the GScript folder and then reboot.
oldcam means the old camera driver for Nexus One build.
eb means the older battery driver with extended battery support.
Install "GScript Lite" from Android Market to execute these .sh files.
E.g.: You will see the text below if executing "conn_RMNET_with_michyprima_R11_AXI.sh" successfully.
RMNET is ready.
michyprima_R11_AXI is ready.
Finished.
Reboot required.
Click to expand...
Click to collapse
Create 512 MB data.img (You can specify the different data image size in startup.txt)
Rooted: superuser privileges (su and busybox) included
Some apps included (Delete any apk files in the AndroidApps folder before first boot if you don't like any of them.)
What is working:
WiFi
GPS (works great. I got a location within 15 seconds.)
3G/HSDPA
5MP Camera with flash, auto focus and zoom
Camcorder with flash
LED status notification
Keypad LED control
Auto Backlight
Bluetooth (BT headset is fully supported in calls, music streaming/A2DP, and files transfer.)
Compass
G-Sensor
Microsoft Exchange ActiveSync
WiFi Tethering/Hotspot (works with RMNET. For PPP, please install android-wifi-tether on Google Code)
USB Tethering (Please install android-wired-tether on Google Code)
USB Mass Storage (You can copy files from PC to PC. But Android apps cannot see the copied files in the phone before rebooting.)
Tips:
The battery power consumption on standby is about 5~7mA (less than 1% per hour) without SetCPU installed.
To my knowledge, the battery life is related to the WM ROM, radio version, and all the apps running in the background.
The default CPU clock rate is set to 245MHz ~ 998MHz, but you can install SetCPU to overclock.
Turn off the live wallpaper for better performance and battery life.
Install LauncherPro for a smoother home screen.
I have included the following apps in the AndroidApps folder, they will be installed at first boot:
DSPManager 1.0.apk
ES File Explorer 1.4.8.5.apk
Fancy Widget 1.3.0.apk (Time & Weather)
Superuser 2.3.6.1.apk
TeslaLED 2.0.4 Gala.apk
About 3G/HSDPA:
The stock Nexus One ROM only shows 3G icon in the status bar no matter if you are in HSDPA or not.
You can check under "Settings > About phone > Status > Mobile network type". If it says HSDPA, you are on the 3.5G network ("H" Network).
With v1.8, I have included FRG83D_stockbar_add-on_H_icon_and_battery%_icon.zip in the "Android/root" folder.
If you don't like this add-on, please delete the folder named "root" located in the "Android" folder before first boot.
Mod edit: Link removed
Please install MoreLocale 2 from Android Market to enable more languages if needed.
Please visit Nexus One Help website and try to find the answer when you encounter any software issues on NexusHD2-FRG83(D). Thanks.
Installation Instructions:
Extract the Android folder (with all files in in) to root of your SD Card. THIS IS IMPORTANT.
If you already have an Android folder on your SD Card DELETE IT OR RENAME IT, because this version MAY BE INCOMPATIBILE with older releases !!!
After copyng everything to your SD Card ensure you have at least 600 Mb free space for data store
After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET.
On first run when there is "Creating a new datastore" just give it time to complete, and on first boot be patient and give it time to load everything.
If you get some strange errors, or Android does not work, try to reformat SD card and try everything from the start.
HD2 needs radio 2.08 or above to run Android. If you never upgrade your radio, you may not be able to run Android on HD2.
>>>> All apps will now function and install correctly. If you have an issue installing an app from the Android Market or another source, then go through the following steps:
>>>> - Go to Settings > SD & phone storage > Unmount SD card
>>>> - Now install your app, it will now install correctly and function fine
>>>> - Go to Settings > SD & phone storage > Mount SD card
My HD2 WinMo Info:
ROM: Stock 1.66.709.3 (76641) CHT
Radio: 2.12.50.02_2
DOWNLOADS:
Mod edit: Link removed
Please install the latest 7-Zip 9.20 or WinRAR for uncompressing.
If upgrading from the previous versions, please copy the original "data.img" to your new extracted Android folder.
Special thanks:
- Cotulla - for making all this possible
- dan1j3l - for rootfs and liblights
- Markinus - for the "official" EVO kernel
- hastarin - for the EVO kernel
- huanyu - for the N1 kernel
- michyprima - for the N1 kernel
- Rajko - for the Compass fix
- mdebeljuh - for the G-Sensor workaround
- jdivic - for the G-Sensor workaround
- Letama - for the libhtc_ril_wrapper.so used by PPP
- aussiebum - for the suggested PPP options
- bangsters - for setting the size of data.img in startup.txt
- Cass67 - for the Bluetooth fix with EVO based kernel
- darkstone - for the readme and his build for reference
- gauner1986 - for the lights.htcleo.so
- Geo411m - for the FRG83D Stock, Deodexed, rooted, busybox ROM and add-ons (11/24)
- mattc - for the tweaks in rootfs
- memin1857 - for the tips that fix the auto backlight issue
- NetRipper - for the latest haret.exe (9/14)
- shu8i - for the readme
- Bluetooth headsets testers
- Everyone on #htc-linux & #htc-linux-chat, devs at xda-forums
If I missed anyone please let me know. Thanks to everyone who made this possible.
If you appreciate my work and want to buy me a drink, please consider making a donation.
Thank you.
Thanks for your generous donations:
ricklo
philipdeane
ghis1
wildwong
robrob777
spyderman33
sciueps
bohhem
mmaner
and other anonymous donators
...
P.S.: Screenshots below have some apps not included in downloaded 7-zip file.
FAQ and Changelog
FAQ:
Please visit the complete backup site if you would like to download the older builds. http://sites.google.com/site/nexushd2android/
A possible solution to whose can't send MMS. http://forum.xda-developers.com/showthread.php?p=8813087#post8813087
A possible solution to whose have the PPP disconnection issue. http://forum.xda-developers.com/showthread.php?t=794309&page=12
[HOW-TO] change the kernel by using GScript Lite http://forum.xda-developers.com/showthread.php?p=9737227#post9737227
[HOW-TO] add more GScript (.sh) for switching to different kernels. http://forum.xda-developers.com/showthread.php?p=8776985#post8776985
[HOW-TO] increase the size of data.img for more "Device" storage. http://forum.xda-developers.com/showthread.php?p=8908720#post8908720
[HOW-TO] solve the "jumping to kernel" issue. http://forum.xda-developers.com/showthread.php?p=8989728#post8989728
[HOW-TO] use USB tethering and WiFi tethering. http://forum.xda-developers.com/showthread.php?p=9066846&posted=1#post9066846
[HOW-TO] change the LCD DPI (lcd_density) in this build. http://forum.xda-developers.com/showthread.php?p=9357419&highlight=lcd_density#post9357419
[HOW-TO] sync MS Outlook data (contacts and calendar) with Android. http://forum.xda-developers.com/showpost.php?p=9350103&postcount=1818
[HOW-TO] upgrade the kernel to hastarin's r8.6_oldcam or r8.6_eb_oldcam. http://forum.xda-developers.com/showthread.php?p=9881424#post9881424
[HOW-TO] get the mobile connection working if changing the APN setting is still not working. http://forum.xda-developers.com/showthread.php?p=9756057#post9756057
[HOW-TO] solve the 50mA battery drain problem on standby. http://forum.xda-developers.com/showthread.php?p=9756249#post9756249
If you would like to help others with your experiences, please feel free to share your info below. Thanks.
Google Docs: NexusHD2's Compatible Bluetooth Headsets List
Google Docs: NexusHD2's Compatible WM ROMs and Radio List
Changelog:
V1.8 (PPP + RMNET)
Use hastarin r8.5.3_oldcam kernel in default
Letama's libhtc_ril_wrapper.so v0.7 included
The PPP options and kernel memory tweaks included
Small tweaks for rootfs
Microsoft Exchange ActiveSync fixed since FRG83D
V1.7 (PPP + RMNET)
Upgrade to the latest Google Nexus One's OTA update - FRG83D (released on Nov. 18, 2010)
Use hastarin r8.2 kernel with G-Sensor fix by (mdebeljuh and jdivic) in default
Letama's libhtc_ril_wrapper.so v0.4 updated
Auto Backlight issue fixed for RMNET kernels
Microsoft Exchange ActiveSync fixed since FRG83D
V1.6 (PPP + RMNET)
Use hastarin r8.1 kernel in default.
Specify the WiFi MAC address in startup.txt
Auto Backlight issue fixed. (lights.htcleo.so updated)
PPP disconnection issue fixed. (libhtc_ril_wrapper.so v0.3 updated)
Background noise / mic gain fixed. (htcleo.acdb added)
V1.5 (PPP + RMNET)
Bluetooth works with N1 based kernel and EVO based kernel now.
LED status notification (e.g.: missing calls) is working properly now.
V1.4 (PPP + RMNET)
Support both PPP and RMNET data connections, default is PPP (Execute different sh files located in the GScript folder to switch between them quickly and conveniently.)
Use hastarin's r7.6 kernel in default (N1 based Bluetooth can't work with Evo based kernel so far. If you need Bluetooth, please switch back to michyprima's R11 kernel)
Compass is working now due to the new kernel
Touchscreen freeze has greatly reduced due to the new kernel
Replace prior media folder with Nexus One's build-in media (There is default ringtone at first boot now.)
Small tweaks
V1.3 (RMNET)
Add DSPManager app and the related lib
Add some tweaks for Bluetooth headsets and replace some Bluetooth related libs
Bluetooth headset is fully supported in calls, music streaming/A2DP, and files transfer now. (But some BT headsets may not be compatible with this build.)
V1.2 (RMNET)
Data upload problem in 3G/HSDPA network has been fixed
Some tweaks from mattc's NexusLeo v1.1 build has been included
V1.1 (RMNET)
No green line in HQ YouTube now
Restore to the stock libOmx libraries (I replaced some of them in order to fix the broken camcorder when converting into HD2 format from the stock Nexus One ROM. But it causes the green line in YouTube. So restored.)
Fancy Widget 1.3.0.apk (Time & Weather) included
V1.0 (RMNET)
Initial release
woww .. thanks ...
thanks.. i was waiting for someone to release this update
downloaded.. i'll report later
thanks...i will try and give you feedback
Proud of you !!!
Thanks for sharing!
thx ,very love nexus one build
this build is ppp ???????
May I ask hows the battery life on this build....
Hi,
Password on zip ??
clean cut and straight to the point build ..i like
chungkai said:
this build is ppp ???????
Click to expand...
Click to collapse
It's RMNET.
I have downloaded from Rapidshare and MegaUpload;
The files do not extract properly...
Need to use 7 Zip Beta version..... Thx
Thank you very much.
Is is ppp/rmnet?
Can we change lcd density?
use the newest 7zip (Beta) then extracting works ;-)
yeah is this build rmnet or ppp??
can't wait to try it on if it's rmnet..
edit: ooops.. i think someone already aanswered it thaanks..
jirka607 said:
May I ask hows the battery life on this build....
Click to expand...
Click to collapse
1% ~ 1.2% per hour when being 3G standby.
You may change the kernel (zImage) for better battery life.
E.g.: huanyu's kernel is about 1%: 925mv_BFS_BFQ-0.3.1.zip
tytung said:
It's RMNET.
Click to expand...
Click to collapse
i can change that build "ppp"??????
chungkai said:
i can change that build "ppp"??????
Click to expand...
Click to collapse
Sorry. I don't know how to enable ppp so far.
Tsury said:
Thank you very much.
Is is ppp/rmnet?
Can we change lcd density?
Click to expand...
Click to collapse
rmnet.
You need to modify "/system/build.prop" by yourself.
change "ro.sf.lcd_density=240" to "ro.sf.lcd_density=180" or whatever you want.
Welcome to Jaws-MIUI..
I'm just a newbie porter, i'm not a developer..credit goes to real developer out there in #htc-linux, special thanks to Dominues for "How to build an Android port", LeTama for telling me how to fix data connection and Atoore for FM Radio permission fix..
base on : MIUI 18-12-10
Kernel : Hastarin 8.5.3_eb oldcam
Whats working :
* 3g/HSDPA
* LED & keypad status notification
* Bluetooth
* USB mass storage
* G Sensor WORKING
* Facebook sync
* Camera/Camcorder
* Wifi
* GPS
* FM Radio
* Theme Manager
Whats not working:
----
if you have boot fail, PLEASE use data.img below (R3BrotherJr provided)
Download 18-12
Click Here Please
Download Data.img here
http://www.multiupload.com/7D1XQ9TJ4G thanks to R3BrotherJr
Patch1 : English Language Pack #1b thanks to markhuk from MIUI Dev forum
Click Here Please
Note..
If it boot up fine for you remember this :
Default DNS is my provider, please edit build.prop or use build.prop from old build and put it inside MIUI-Jaws folder
on first boot, go to setting - program - manage application - tab all, find launcher then clear data & force stop .. it will fix launcher
Ouch, i forget fix sdcard install app (like angry birds), do this by yourself..credit goes to rafpigna
Code:
- install terminal
- type this :
su
cd system/bin
ln -s toolbox newfs_msdos
reboot
try install angry bird without unmount sdcard
===================================================================
Older release..(don't use any patch below for new release)
Download 11-12 :
Click Here Please
Update Patch for fix Market FC (the new market seems didn't work)
Click Here Please
before applying market patch fix..install terminal then do this :
su
rm /system/app/vending.apk
=============================================================
Download 03-12 :
Click Here Please
Jaws-MIUI changelog..
Code:
Patch1 (language pack #1b)
- Mms string improvements.
- ThemeManager string improvements.
- Settings (Fixed Chinese in the personal passwords section) Thanks all who helped debug.
- Settings string improvements.
- Monitor string improvements, known bug, if you select one traffic set-up, and then set-up the other, entering the values and saving causes a FC, reloading the app does take the changes fine though.
- MiuiMusic string improvements.
- FileExplorer, fixed Chinese characters 'Bytes' shown in File Info. (thanks Keshav for the screen shot report). This involved editing Smali code.
18-12
- update to MIUI 18-12-10
- ironing out latest known bug from 11-12
11-12
- update to MIUI 11-12-10
- change SU binary, now root explorer work as it should
- delete su binary in rootfs.img
- fix installed sdcard app like angry bird (don't have to unmount sdcrad) thanks to rapigna..
RC1 :
- update to MIUI 03-12-10
- add wifi ad hoc support
- fix chinese character
- fix theme manager
- back to google dns number in build.prop
Patches :
1. For Fixing Boot Up error & Sensor Notification
Click Here Please
2. For enable logcat
Click Here Please
after applying the patch reboot, if theres reboot failure or boot loop, take off your battery put it back then boot android again..it should boot up fine..
otherwise backup your system.ext2 before applying the patch -- thanks to jamezelle and n_i_x from MIUI-Dev Forum
Extract those file and put this inside Jaws-MIUI-RC1 folder
3. For default MIUI fonts..
Click Here Please
Extrack this folder put it inside Jaws-MIUI-RC1/root/system/ (remember, fonts folder not the fonts self only, it will look like Jaws-MIUI-RC1/root/system/fonts)
NOTE
if u can't boot up my build and don't use above patch, please edit your startup.txt and change this line set cmdline "rel_path=Jaws-MIUI" to set cmdline "rel_path=Jaws-MIUI-RC1 nand_boot=0"
Tips..
Change battery icon to circle icon :
Download this Click Here Please thanks to Pendo from N1 Theme for a great MIUI theme (click his name for more status bar theme)
put this file inside Jaws-MIUI-RC1/root/system/framework/
reboot
================================================================
Old Jaws-MIUI base on RodrigezStyle..
Download :
Click Here please
mirror
Jaws-MIUI, base on RodrigeuzStyle 1.9.1 [Kernal: Hastarin 8.5.1]
PATCH : (only for Old Jaws-MIUI)
1. Wifi ad Hoc & build.prop Patch..
Click Here Please < ---- uploaded 12-2-2010:6:55 pm..fix wifi ad hoc
2. Fonts Chinese Character & Robo Voice Patch
Click Here Please
3. How to fix Theme Style
install terminal emulator, type this
Code:
$su
#busybox chown 0.0 /system/xbin/apply_theme
#busybox chmod 4755 /system/xbin/apply_theme
then reboot..apply theme
what is ad hoc? ad hoc is peer to peer connection between two wifi without the need of access point router, so u can use wireless tether on another android, and you can play remote control tools like ar.drone
READ THIS
i have set my own provider dns in build.prop file.. you must change it according to your own provider DNS, above patch make dns back to google DNS, i suggest you to edit it and find the right DNS according to your provider.. otherwise data / internet will not work
How to apply the patch : just extract root.rar file, put it inside Jaws-MIUI folder then boot to Jaws-MIUI..
ar.drone video
http://www.youtube.com/watch?v=CG5pqTWVahQ
Note..
1. I edit key map for Volume Down button as back menu..
to make it back to volume down, you must edit file qwerty.kl in /system/usr/keylayout find key 114 replace BACK with VOLUME_DOWN
or read this post by kawazaki
2. To fix white box in battery indicator, after first boot, go to setting - sytem- battery : change Battery indicator style to Percentage
Tips..
- install spare part from market..set all animation to fast..
- Wireless Tether apk.. Download Here
- Jaws-MIUI RodrigeuzStyle with Theme Manager is coming too..i'll upload it soon..
thanks to : Cotulla - for making all this possible, dan1j3l, LeTama, hastarin, huanyu, michyprima, Cass67, darkstone, ElbartoME, gauner1986, Geo411m, mattc, memin1857, NetRipper, MIUI-DEV, XDA-DEVELOPERS,MIUI.com (the Rom) and Rodrigeuz from N1 development..
Screen Shot
DONATION
screen shots pls..
sounds cool... some screen shots pls..
Just trying this build, and for me this is one of the best build i ever tried...
testing for a while, and so far everything works like charms...thanks lesjaw....
this is a few things that i found in this build...
Themes is fantastis
Mobile Network works like charms, for the very first time i can browsing without have to change anything, like ppp ect
Camera and Camcoder works perfect, green image or anything
Very Fast
CMIIW, but so far this build is already 99% english
There is no problem with scynch, either with time, or facebook contact (i have that problem before)
Screenshots are dead? just two "x"s ??
you said that 99% are in English.
Is it possible to make a build in another language? Or how to do that?
I'll download your build this evening to test it
mohasea said:
you said that 99% are in English.
Is it possible to make a build in another language? Or how to do that?
I'll download your build this evening to test it
Click to expand...
Click to collapse
what language do you want? it is possible but currently not so many language are avalaible..
I'm switching from MIUI free beer and woman 5/11 , ofcourse I can switch with my current data.img .
One thing is making me anxious, it's the battery.
How much does it consume on standby ? on MIUI 5/11 it shows 3-4 mA ..
It's almost better than in WinMo .. I will give this one a shot and I hope it satisfy my needs
Thank you for your effort
And everybody who contributed !
kawazaki said:
I'm switching from MIUI free beer and woman 5/11 , ofcourse I can switch with my current data.img .
One thing is making me anxious, it's the battery.
How much does it consume on standby ? on MIUI 5/11 it shows 3-4 mA ..
It's almost better than in WinMo .. I will give this one a shot and I hope it satisfy my needs
Thank you for your effort
And everybody who contributed !
Click to expand...
Click to collapse
usually i get around 5 ma in standby.. i have tweetdeck with FB and Twitter account sync for every 3 minutes, 3 Gmail account, i account is a high traffic mailist..almost hundreds to thousand emails a day..
in my experience most of MIUI build has the same battery consume on standby..
nice build.... very fast boot... great job
feedback(my view)
- wifi working
- battery is not showing percentage, showing a box inside circle
- animation between screens are not professional.
Do themes happen to work with this build?......
thank you for your build but why dont working the themes?
ree4mail said:
nice build.... very fast boot... great job
feedback(my view)
- wifi working
- battery is not showing percentage, showing a box inside circle
- animation between screens are not professional.
Click to expand...
Click to collapse
Personally, i love the battery icon in this build, especially when charging...
for percentage, u can download batteryindicator.apk from market...
but what do you mean by "animation between screens?"
downloading now
ree4mail said:
nice build.... very fast boot... great job
feedback(my view)
- wifi working
- battery is not showing percentage, showing a box inside circle
- animation between screens are not professional.
Click to expand...
Click to collapse
go to setting - system - battery change battery indicator style to percentage
Nor professional? wierd..
slimster said:
Do themes happen to work with this build?......
Click to expand...
Click to collapse
no..i'm sorry..all MIUI build cant do themes.. we must manually add it to framework-res.apk .. anyway this build is base on N1 RodrigezStyle which is modified enough.. i'm really sure if we can apply the theme it breaks the build..
thanks a lot for the build, downloading now. just one thing, is it possible to add custom icons in a MIUI build? cheers
hello,
how do i reduce volume while listening 2 music since the volume down button is edited as back menu button?
Thanks
going to check it out..
remap
can u explain the button remap thing again, what u said in the op wasnt clear to me.
thanks
GREAT work mate Downloadin as we speak.. LOVE the MIUI builds, and here is another one... BIG BIG thanx
StreakDroid 1.7.0 ( aka HD7 Edition ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com
I HAVE REMOVED FRING SUPPORT FROM THIS BUILD FROM NOW ON, IM SICK OF WASTING 2 DAYS FIXING THE FRAMEWORKS TO ALLOW FRING TO WORK, IF YOU WANT FRING SUPPORT GO COMPLAIN TO THEM (@FRING ON TWITTER ALSO)
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 1.7 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
PERFMOD IS NOT enabled by default in this version, had some reports of stabily problems but their is now an installer option to reenable it if you wish, if you choose not to enable the installer will automaticly trasfer your data back to save a reset
also lots of other little tweaks been added
1.0 > INSTALLATION CHANGES :
With 1.7, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Rebel SIM Compatibility : Users who previously downloaded the NOBB version of the file may now simply select the option by typing it into the text file before flashing the Zip. Please note that Rebel SIM users are still required to manually Fastboot flash the 2.1 8105 Baseband for compatibility.
B.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
C.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI.
D.Other Settings : Other settings available include -
•Volume Boost
( flashes the A Modified kernel with louder volume hack ),
•Tabmail
( installs the Galaxy Tab Email Client port beta 2 instead of stock email client ),
•Teetermod
( installs Teetermod edit to get HTC Teeter working, installs the app and a modified build prop with 240dpi lcd density )
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
volboost
tabmail
bios
That is it. You can save this text file as install.cfg
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher and removes the default gingerbread launcher
launcherpro - this installs launcherpro and removes gingerbread launcher
stageui - this installs dells Stage UI and removes the gb launcher
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
transparent - restores the 1.5.3 transparent statusbar, which is partially disabled by default
nobaseband - installs the required libs for using a rebelsim
volboost - flashes a new super volume boost kernel
tabmail - installs the Galaxy Tab Email Client port beta 2 instead of stock email client
teetermod - installs teetermod edit to get htc teeter working, installs the app and a modified build prop with 240dpi lcd density
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
gbkb - installs Gingerbread keyboard instead of stock keyboard, this will cause force close in dictionary settings
perfmod - Enables the 1.6.1 Perfmod Option, disabled by default due to possible problems
stockphone - restores the stock phone/contacts apps rather than the new streak 7 versions
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download Update-1.7.0.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > StreakDroid_1-7.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Version: v1.7.0
Known Issues:
Accelerometer is dodgy at times but I cant pin down the issue - usually going into Settings > Display and toggling Auto Rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 05/02/2011
Version 1.7.0 AKA HD7 Edition
• Replaced some aging libs and frameworks with new ones from dell 322 offical, probably fix some audio issues
• Fixed HDMI output (see note below)
• Added GScript
• Removed Perfmod by default due to some instability discovered
• Added New Keyboard and Langs from official 322 build
• Updated all apps to latest
• Fixed transparent notification bar to new icons etc
• Fixed kang-o-rama live wallpapers
• Updated stageui to version from streak 7 (no huge changes though)
• Slackerradio from streak 7 added
• Removed live wallpapers that are not full screen
• FRING FRONT FACING CAMERA SUPPORT HAS BEEN REMOVED PERMANENTLY, START ARGUING WITH FRINGS DEV IF YOU HAVE A PROBLEM WITH THIS
• Rebuilt theme from scratch, works better now, removed borked batt percentage,
• Changed fonts to much nicer looking one
• Added microbes live wallpaper
• Added fards tweaked libskia libs to fix some websites dying
• Hopefully vplayer is now fixed
• Facebook sync confirmed working
• Tweaked the browser and phone icons to match gb theme .
• Finally managed to fix the phone app in lcd densitys other than 160 - thanks to the dell streak 7 dump for this
• Added an auto transfer feature to move from 1.6.1 with perfmod to stock 170 without
• Reverted Some 3D Tweaks made in 1.6.x causing Gameloft games to fail
UPDATE 22/1/2011
Version 1.6.1 AKA ITS OVER 3 THOUSAND
• Updated libs to fix oovoo
• Updated volboost kernel to new version
• Fixed some installer issues
• Added gopus battery icon, modified colors
• Made settings > about > System Update work for updating streakdroid roms (yes you can check for updates direct from your streak
• Added a Noswype installer option to remove the preinstalled swype
• Added zeam launcher
• Fixed fc's in settings
• Added HEAVILY Tweaked Performance Mod data2ext Tweak, using just the streaks internal sd card now no need for changing things on external sd
• Added an option to install gingerbread keyboard instead of stock keyboard - dictionary settings force closes with gingerbread keyboard installed
• Added Live Wallpaper From Nexus S
UPDATE 10/1/2011
Version 1.6.0 AKA Install-o-Rama
• Added heavily modified advanced installer thanks to kang-o-rama mod for nexus one.
• Changed theme to add black statusbar due to transparancy issues
• Fring support available through installer
• Transparancy available through installer
• Changing lcd density available via installer
• Baseband/nobaseband via installer
• Re-enable old louder volume kernel
• Teetermod via installer
• Enable galaxy tab email client via installer
• USA region settings in build prop via installer
• New kernel with some perf changes, cfq reenabled
• Bios animation bootscreen chooseable via installer
NOTE: for HDMI to work you must run gscript and load the 2 files from your memory card (the rom will of created a gscript folder containingthem) then run the hdmi output on script before trying video, once you are done either reboot or run the hdmi off script
this is due to one of the performance tweaks interfering with hdmi
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
[/quote]
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/update-1.7.0.zip
Mirror 1: http://www.android-roms.com/downloads/upda...pdate-1.7.0.zip
Mirror 2: http://downloads.streakdroid.com/djsteve/update-1.7.0.zip
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://www.android-roms.com/downloads/updates/amss.mbn
Mirror 2: http://mirror2.streakdroid.com/amss.mbn
VPN USERS: TUN.KO IS INCLUDED IN THE ROM ALREADY - LOOK IN /SYSTEM/LIB/MODULES.
if you have NOT already flashed the dell 2.2 pkg or my 720p fix you need this to fix 720p video - otherwise ignore
http://downloads.streakdroid.com/testing/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
Kang-O-Rama Rom Maker for nexus one for allowing me to use his advanced installer
omca & xplanet hosting for providing additional mirrors
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
android-roms for the mirror
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
If a different density is selected, will we still got FCs like we do now? Meaning, has the ui been modified and scaled for different densitys?
Sent from my Dell Streak using XDA App
no, ive been looking at changing the dialer but any change kills the phone modem for some reason, still investigating
There is a folder named android already on my sd card do I use that one to put streakdroid?
Sent from the Iphone Killer
yea you can put folder into that
Why do I keep getting no download directory found? Nevermind I had the streak connected to the USB of my PC. DUH!
Sent from the Iphone Killer
if i leave out the lcd density will i get default settings?
I feel kindof stupid asking this but how do you turn on auto rotate with the gingerbread launcher? It seems to be stuck in landscape for me (everything else auto rotates).
Ok I installed 1.6.0 but I did not get the options to change anything. I created the folder android>streakdroid>install.cfg with text options. Nothing happened when does the option suppose to pop up? This is what I put in the text file below. Do I need to put code box?
adwlauncher
volboost
tabmail
bios
borijess said:
Ok I installed 1.6.0 but I did not get the options to change anything. I created the folder android>streakdroid>install.cfg with text options. Nothing happened when does the option suppose to pop up?
Click to expand...
Click to collapse
Those are your options...
I am so excited to try out all of the OPTIONS! Thank you DJ Steve! US local customization has never been easier. We are all so grateful of your releases. Kang-o-rama was always a fun mod on the Nexus One. Would like to see ADW EX installer as an option maybe in the future
Haz anyone ran through this install for 1.6 with the White BestBuy Dell Streak that originally started with the 6601 build? Or does that not matter anymore? I am currently on StreakDroid 1.4.6 with StreakMod 3.2.6-beta.
thanks i just used stageui in the txt & everything seems to work fine
Wow quadrant scores have increased without overclocking. I am getting 1700 was getting 1400 with 1.5.3
Nevermind for some reason the text file did not save in the folder.
I’m thoroughly confused. I set 240 density but everything is absolutely massive in size using the Gingerbread launcher. >.>
Shouldn’t higher density = more stuff on screen?
no you have it backwards, lower=higher resolution
Stupid question but is it possible to backport the Gingerbread sip stack to use the built in sip function in Gingerbread?
I get my streak tomorrow but I don't think that is likely with this snow storm on the east coast.
Well then, time for another reinstall.
Wow quadrant scores have increased without overclocking. I am getting 1700 was getting 1400 with 1.5.3
Click to expand...
Click to collapse
ive tryed a few times & im just getting 1560s not overclocked
I tried to load it, but when i choose what i want and select zip, nothing happened, ROM loaded, but in default settings, but thank you, great ROM.
StreakDroid 1.8.1 ( aka Bug Extermination Edition ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com
I HAVE REMOVED FRING SUPPORT FROM THIS BUILD FROM NOW ON, IM SICK OF WASTING 2 DAYS FIXING THE FRAMEWORKS TO ALLOW FRING TO WORK, IF YOU WANT FRING SUPPORT GO COMPLAIN TO THEM (@FRING ON TWITTER ALSO)
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 1.7 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
PERFMOD IS NOT enabled by default in this version, had some reports of stabily problems but their is now an installer option to reenable it if you wish, if you choose not to enable the installer will automaticly trasfer your data back to save a reset
also lots of other little tweaks been added
1.0 > INSTALLATION CHANGES :
With 1.8, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Rebel SIM Compatibility : Users who previously downloaded the NOBB version of the file may now simply select the option by typing it into the text file before flashing the Zip. Please note that Rebel SIM users are still required to manually Fastboot flash the 2.1 8105 Baseband for compatibility.
B.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
C.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI.
D.Other Settings : Other settings available include -
•Volume Boost
( flashes the A Modified kernel with louder volume hack ),
•Tabmail
( installs the Galaxy Tab Email Client port beta 2 instead of stock email client ),
•Teetermod
( installs Teetermod edit to get HTC Teeter working, installs the app and a modified build prop with 240dpi lcd density )
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
volboost
tabmail
bios
That is it. You can save this text file as install.txt
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher and removes the default gingerbread launcher
launcherpro - this installs launcherpro and removes gingerbread launcher
stageui - this installs dells Stage UI and removes the gb launcher
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
transparent - restores the 1.5.3 transparent statusbar, which is partially disabled by default
nobaseband - installs the required libs for using a rebelsim
volboost - flashes a new super volume boost kernel - now with per page tables kgsl(3d) tweaks, may break gameloft games)
tabmail - installs the Galaxy Tab Email Client port beta 2 instead of stock email client
teetermod - installs teetermod edit to get htc teeter working, installs the app and a modified build prop with 240dpi lcd density
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
gbkb - installs Gingerbread keyboard instead of stock keyboard, this will cause force close in dictionary settings
perfmod - Enables the 1.6.1 Perfmod Option, disabled by default due to possible problems
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
tabletphone - installs the modified dellstreak7 dialer, this causes a graphical bug in recent calls list but works fine
161font - restores the fonts from 1.6.1
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download update-1.8.1.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > update-1.8.0.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Version: v1.8.0
Known Issues:
Accelerometer is dodgy at times but I cant pin down the issue - usually going into Settings > Display and toggling Auto Rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 23/02/2011
Version 1.8.1 AKA Bug Extermination Edition
• Reverted Some changes due to stability
• Reverted the 1.5ghz kernel due to issues with wifi.
UPDATE 23/02/2011
Version 1.8.0 AKA Chernobyl Meltdown Edition
• Reverted back to some of the older libs due to the random bugs
• Added honeycomb music player as default
• Tablet Phone App looks much nicer
• Updated honeycomb music
• Added new kernels and install options
• Added adhoc wifi support
• Added slight changes to statusbar
• Reverted to stock phone app due to issues with streak7 one, moved streak7 dialer to installer option instead, this has some graphical bugs but works fine
• Added new kernel with 1.5GHz Overclocking Ability !!!! - this may prove unstable so dont use permanently, 3d may also not work at full clock speed - not certain if it is actually overclocking to that speed either
• Added option to restore the fonts from 161 in installer
• Fixed the huge settings icons
UPDATE 05/02/2011
Version 1.7.0 AKA HD7 Edition
• Replaced some aging libs and frameworks with new ones from dell 322 offical, probably fix some audio issues
• Fixed HDMI output (see note below)
• Added GScript
• Removed Perfmod by default due to some instability discovered
• Added New Keyboard and Langs from official 322 build
• Updated all apps to latest
• Fixed transparent notification bar to new icons etc
• Fixed kang-o-rama live wallpapers
• Updated stageui to version from streak 7 (no huge changes though)
• Slackerradio from streak 7 added
• Removed live wallpapers that are not full screen
• FRING FRONT FACING CAMERA SUPPORT HAS BEEN REMOVED PERMANENTLY, START ARGUING WITH FRINGS DEV IF YOU HAVE A PROBLEM WITH THIS
• Rebuilt theme from scratch, works better now, removed borked batt percentage,
• Changed fonts to much nicer looking one
• Added microbes live wallpaper
• Added fards tweaked libskia libs to fix some websites dying
• Hopefully vplayer is now fixed
• Facebook sync confirmed working
• Tweaked the browser and phone icons to match gb theme .
• Finally managed to fix the phone app in lcd densitys other than 160 - thanks to the dell streak 7 dump for this
• Added an auto transfer feature to move from 1.6.1 with perfmod to stock 170 without
• Reverted Some 3D Tweaks made in 1.6.x causing Gameloft games to fail
UPDATE 22/1/2011
Version 1.6.1 AKA ITS OVER 3 THOUSAND
• Updated libs to fix oovoo
• Updated volboost kernel to new version
• Fixed some installer issues
• Added gopus battery icon, modified colors
• Made settings > about > System Update work for updating streakdroid roms (yes you can check for updates direct from your streak
• Added a Noswype installer option to remove the preinstalled swype
• Added zeam launcher
• Fixed fc's in settings
• Added HEAVILY Tweaked Performance Mod data2ext Tweak, using just the streaks internal sd card now no need for changing things on external sd
• Added an option to install gingerbread keyboard instead of stock keyboard - dictionary settings force closes with gingerbread keyboard installed
• Added Live Wallpaper From Nexus S
UPDATE 10/1/2011
Version 1.6.0 AKA Install-o-Rama
• Added heavily modified advanced installer thanks to kang-o-rama mod for nexus one.
• Changed theme to add black statusbar due to transparancy issues
• Fring support available through installer
• Transparancy available through installer
• Changing lcd density available via installer
• Baseband/nobaseband via installer
• Re-enable old louder volume kernel
• Teetermod via installer
• Enable galaxy tab email client via installer
• USA region settings in build prop via installer
• New kernel with some perf changes, cfq reenabled
• Bios animation bootscreen chooseable via installer
NOTE: for HDMI to work you must run gscript and load the 2 files from your memory card (the rom will of created a gscript folder containingthem) then run the hdmi output on script before trying video, once you are done either reboot or run the hdmi off script
this is due to one of the performance tweaks interfering with hdmi
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
[/quote]
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/update-1.8.1.zip
Mirror 1: http://downloads.streakdroid.com/djsteve/update-1.8.1.zip
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://mirror2.streakdroid.com/amss.mbn
VPN USERS: TUN.KO IS INCLUDED IN THE ROM ALREADY - LOOK IN /SYSTEM/LIB/MODULES.
if you have NOT already flashed the dell 2.2 pkg or my 720p fix you need this to fix 720p video - otherwise ignore
http://downloads.streakdroid.com/testing/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
Kang-O-Rama Rom Maker for nexus one for allowing me to use his advanced installer
omca & xplanet hosting for providing additional mirrors
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
android-roms for the mirror
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
ALL THE TESTERS DESERVE HUGE THANKS FOR THEIR HELP EVERYONE !!
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
Currently on 1.7.1 Beta ver6. Downloading 1.8.0 FINAL right now.
DJ Steve you are a star. Downloading right now. When are we getting the honey comb that you have been teasing us about
wen i get sources, no point releasing a build that has nothing useful working
GiRARDsays said:
Currently on 1.7.1 Beta ver6. Downloading 1.8.0 FINAL right now.
Click to expand...
Click to collapse
Just flashed 1.8.0. Haven't noticed much difference between this final release and the beta I was on prior.
good job steve.i wont flash 1.8.0 yet because i just finished installing my apps on 1.7.0. but i'm sure is same as good as 1.7.0.cheers!
Thanks Steve.
What happened to 1.7Ghz performance?
Sent from my Dell Streak using XDA App
just so you know steve the build number says 1.7.0 when installing through streakmod
jvc.silence said:
good job steve.i wont flash 1.8.0 yet because i just finished installing my apps on 1.7.0. but i'm sure is same as good as 1.7.0.cheers!
Click to expand...
Click to collapse
You can flash it right over 1.7.0. No need to factory reset, therefore you won't lose apps or settings.
GiRARDsays said:
You can flash it right over 1.7.0. No need to factory reset, therefore you won't lose apps or settings.
Click to expand...
Click to collapse
How would i do this?
raymando said:
How would i do this?
Click to expand...
Click to collapse
I just flashed over 1.7. Just go into clockwork or streakmod and flash the zip. I wont erase your settings or apps.
raymando said:
How would i do this?
Click to expand...
Click to collapse
Download the new zip for 1.8.0 and save it to your SD card. Read the new install options and update your "install.txt" file if necessary. Then go into recovery, either StreakMod or Clockwork, then flash it just like how you did 1.7.0.
Dumb question but what do these exactly do? In english terms please. Will all of us need this? How will it help me?
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
borijess said:
Dumb question but what do these exactly do? In english terms please. Will all of us need this? How will it help me?
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
Click to expand...
Click to collapse
It's really only relevant if you play Gameloft Games on your phone. If you do, choose the 1st one if you want volboost. If you don't play Gameloft games, don't worry about it.
i cant get this too load for the life of me. I wipe everything. had the install.txt file on the root of the sd. Im now trying with out the install.txt file. I get to the lock screen and it freezes.
Hellzya said:
i cant get this too load for the life of me. I wipe everything. had the install.txt file on the root of the sd. Im now trying with out the install.txt file. I get to the lock screen and it freezes.
Click to expand...
Click to collapse
Hmmm. Are you doing a fresh install or are you flashing over an older version? If you're flashing over an older version, which one is it?
Im doing a fresh install coming from 318 with perf mod. Ive tryed it without the install.txt and without.
My icons are really small, Why?
1.8.0 won't boot
1.7.0==>1.8.0 Stayed at stopped boot screen (Android Scribble Red) 30 minutes. Rebooted and now it wont get more than 1/3 through the boot screen before it locks. Cleared Cache and Dalvik. Still won't go.
Heading back to a very stable 1.7.0 till tonight. Hope it will go back!
I flashed 1.8 over 1.7 no problems.
Sent from the Almighty Streak 1.7.0
Evervolv is maintained by MongooseHelix, Preludedrew, and myself. Our goal is to bring ice cream sandwich to unsupported devices guided by the aosp philosophy, everything we do is opensource and transparent to the public. Visit our Gerrit or Github.
We have a few customizations such as:
Androidian Theme
Battery percent
QwikWidgets
Six bar signal strength
Standalone power widgets
Tri State lockscreen with customizable actions
Trackball / Volume wake
Volume button music controls
All of these can be turned off or set back to aosp apperance via our EVToolbox for those that wish to have a pure google look.
Click to expand...
Click to collapse
I originally started porting ICS to my beloved nexus one the very same day google released the source back in November. I had very little knowledge and no experience porting android. It took 2 days to sort countless build errors and get it booting, only a few days later i was able to release my first alpha (where absolutely nothing worked) It has come a long way since then, with hundreds of hours invested on my part and undying support from this wonderful commutity, I am pleased to announce: as of 2.1.0p11 this rom is /almost/ stable. However it will remain in alpha/beta (whatever you want to call it) a while longer, but the majority of people will find this usable as a daily driver.
For those of you not following this thread. You may not know my nexus died. As in the NAND finally gave out ((bootloader) rbchk: Total 1191 bad blocks!!). And I was able to get a replacement on ebay for $142.50 USD. Paid for entirely with your donations! Thank you to everyone who donated (i can't appreciate it enough). I look forward to bringing you the latest and greatest Ice Cream Sandwich to your n1's.
I have spent many hours and sleepless nights on this. So if you like it please feel free to hit that donate button above that picture of me.
Working: [person who helped fix it]
3g (Radio: i use 5.08.00.04 - 5.12 reported working just as well)
Accelerometer/Compass [me][chrs2021]
Apps2sd [me]
Bluetooth [me]
Calling
Camera [rampv78] Preview [kushdeck] Video [mongoosehelix/me]
Fm (reported working with third party apps from market)
Gps
Hardware Acceleration [me] (p8 and up)
Headphone jack [zivan56]
Home button [MongooseHelix]
Init.d [MongooseHelix]
Led (TrackBall) Notifications
MMS
Network Stats and Quota [me]
Opengl support [me]
Screenshots
Sound [sean neeley][me]
Signal Strength [cm][me]
TouchScreen [dr1337] Multitouch (2 finger) [theomy]
Trackball (navigation) [me] (clicking) [jaybob413]
Trackball Wake [me]
USB Mass Storage (native now working)
Usb Tether (dk-zero-cool)
Wifi [cm]
Wifi Signal Strengh Icon in Status Bar. [preludedrew]
Wifi Tethering
Click to expand...
Click to collapse
Not Working:
Gapps might not work properly (search the thread for fixes before posting issues)
wifi ad-hoc/p2p
Builtin alarm clock app doesn't work 100% of the time.
Click to expand...
Click to collapse
TODO list
Fix omx video
Click to expand...
Click to collapse
Short FAQ
Q:Screen wont come back on, the buttons light up but i have no screen?!
A: Try taking out your sdcard. If it works you need to reformat your sdcard and whatever you do dont use clockworkmod!
Q: Im getting lockups and have to pull the battery to restart?
A: Easiest way that seems to do the trick: Goto: Evervolv Toolbox -> Performance -> Processor -> change Min Freq to 384Mhz
A: Or: change the governor from ondemand to smartassv2
Click to expand...
Click to collapse
[STOP]
You must install blackrose hboot before flashing ICS. Instructions.
BlackRose
You must increase the size of the system partiton to fit ICS to at least 210MB
*4/14* I had previously recommended 210 system but am now changing that back to 220. The size of ICS and mainly Gapps is growing and with 210 system on the a2 release, after gapps there is only 6mb free space. That doesnt give me very much room to grow on and can cause problems with people who have bad blocks on the system partiton.
RECOMMENDED: System 220MB Cache 10MB Data 206MB Download
System 210 Cache 8 Userdata 218 Download
(or make your own with the Blackrose installer).
All past builds will work just fine on either layout 210 and 220
Future builds might not fit on 210 as of a2 it is pushing it.
If you are installing for the first time choose the 220mb system.
Flash:
Code:
fastboot flash hboot hboot_brcrust_220-10-206-ICS.nb0
fastboot reboot-bootloader
fastboot -w
If it flashed correctly: after the 'reboot-bootloader' command you will see TexasICS on the second line (under blackrose)
Keep up with latest developments
http://review.evervolv.com
To build Evervolv
Code:
repo init -u git://github.com/Evervolv/android.git -b ics
. build/envsetup.sh
breakfast passion
mka
To flash the img files.
Code:
tar xjf <release name>.tar.bz2
adb reboot bootloader
fastboot -w
fastboot flash system system.img
fastboot flash boot boot.img
fastboot reboot
IRC
Join us in #evervolv on freenode http://www.evervolv.com/chat
My nick is drewis.
Enjoy your TexasIce Cream Sandwich!!
Screens from p9. (left lockscreen, middle notification toolbox, right phone info)
More screens (from my g+) https://plus.google.com/photos/102710594547223731659/albums/5724901287546593969
CHANGELOG / Downloads
CHANGELOG / Downloads
ATTN: ALL BUILDS HOSTED ON GOO.IM WERE LOST.
Here is the final version: http://ev-dl1.deuweri.com/Perdo/Evervolv-Perdo-2.2.0-Final-passion.zip
GAPPS:
(latest are posted to mongoosehelix twitter page) or dl here 5-20-release (thanks TuSKan for the mirror)
Gapps are NOT included in the rom. Reasons for this is 1) smaller upload for me 2) Gapps seem to be the source of most peoples problems. This way you can flash whatever version or package you want/works best (or even make your own custom gapps package)
A2SD
About the included apps2sd see: ->here<-
STOCK KERNELS: (no need to flash, provided if you try another kernel and want to switch back)
Source: https://github.com/Evervolv/android_kernel_htc_qsd8k
2.2.0a3: http://d-h.st/TD0
2.2.0a4: http://d-h.st/1xR
Evervolv-Perdo-2.2.0a6 (7/20)
Unofficial build from lacus88: http://forum.xda-developers.com/showpost.php?p=29127460&postcount=4273
Includes the last few commits we submitted to ics before jellybean came out. that didnt make it into the last build.
Evervolv-Perdo-2.2.0a6 (7/1) (final)
Request fill week:
Notification toolbox now QwikWidgets with easier widget reordering
Long press back to kill apps
Trackball Alert Patch to custom colors using lilhermits app
Toolbox and Themes removed from app drawer: now access through settings
Androidian theme is now mostly complete and usable.
Revert some linaro patches to try and fix some weirdness
Rebuild (7/2)
Fix bootanimation
Cleanup to honeycomb lockscreen
finishing touches to androidian theme
ZIP:http://goo.im/devs/evervolv/20120702/Evervolv-Perdo-2.2.0a6-passion.zip
TARBALL:http://goo.im/devs/evervolv/20120702/Evervolv-Perdo-2.2.0a6-passion.tar.bz2
AROMA INSTALLER:http://forum.xda-developers.com/showpost.php?p=28230809&postcount=4174
2 builds are available this time only difference is the toolchain
MORE STABLE: STOCK GOOGLE TOOLCHAIN
ZIP:http://goo.im/devs/evervolv/20120701/Evervolv-Perdo-2.2.0a6-passion.zip
TARBALL:http://goo.im/devs/evervolv/20120701/Evervolv-Perdo-2.2.0a6-passion.tar.bz2
EXPERIMENTAL: LINARO TOOLCHAIN (bluetooth is broke)
ZIP:http://goo.im/devs/evervolv/cron/20120701-gcc-4.7/Evervolv-Perdo-2.2.0a6-passion.zip
TARBALL:http://goo.im/devs/evervolv/cron/20120701-gcc-4.7/Evervolv-Perdo-2.2.0a6-passion.tar.bz2
I put the wrong boot animation in a6.
Here's the correct one : http://d-h.st/Heh
Or the old one if you dont like it: http://d-h.st/nCg
THESE ARE NOT FLASHABLE: push or copy to /system/media/bootanimation.zip with adb or root explorer.
Evervolv-Perdo-2.2.0a5-passion (6/23)
main thing here is camcorder, native omx encoding is working but decoding is still broke so you can record videos but cant play them back. Issues: video is capped at 15fps so it is a little choppy, recorded video is rotated 90 degrees
usb tether support: not native, using the motorola usb app not included (push to /system/app then the toggle in settings will work) i'll probably never include this app in the build since it runs as a service and that bothers me
be sure to check out new options in the evtoolbox (lockscreen and interface) and the new evtips widget
and get the new gapps installer from bexton
ZIP: http://goo.im/devs/evervolv/20120623/Evervolv-Perdo-2.2.0a5-passion.zip
TARBALL: http://goo.im/devs/evervolv/20120623/Evervolv-Perdo-2.2.0a5-passion.tar.bz2
AROMA ZIP INSTALLER repacked by bexton: http://forum.xda-developers.com/showpost.php?p=27815448&postcount=4051
Evervolv-Perdo-2.2.0a4-passion (6/8)
Forgot to bump the version so its still a4
probably 200+ new commits here. Vast majority do not concern n1. but thought it was worth mentioning
bump IMM76L
surfaceflinger hacks: make ui smoother (error in makefile prevented them from being turned on before)
ZIP: http://goo.im/devs/evervolv/20120608/Evervolv-Perdo-2.2.0a4-passion.zip
TARBALL: http://goo.im/devs/evervolv/20120608/Evervolv-Perdo-2.2.0a4-passion.tar.bz2
Evervolv-Perdo-2.2.0a4-passion (5/28)
lockscreen 'wave' animations will follow the unlock around (not just go right)
180 degree (upsidedown) rotation support
kernel updated: kgslv3.8, tiny rcu optimizations, autogroup, bfqv3r2, smartassv2, armv7 changes from caf
newer adreno libs: in combination with kernel updates should make ui noticeably smoother (note: not backward compatible with any pre a4 kernels including tiamat)
updated cli tools: htop v.9, busybox updated 1.20.1, a2sd cleanup: checkext should work better
ZIP: Evervolv-Perdo-2.2.0a4-passion.zip
TARBALL: Evervolv-Perdo-2.2.0a4-passion.tar.bz2
Evervolv-Perdo-2.2.0a3 (5/7)
browser features (incognito / max tabs)
notification toolbox brightness widget fixes
kernel update: sleep of death seems resolved built inline with googles gcc per https://github.com/Evervolv/android_kernel_htc_qsd8k
camera fixes (rapmv78)
ZIP: http://goo.im/devs/evervolv/20120507/Evervolv-Perdo-2.2.0a3-passion.zip
TARBALL: http://goo.im/devs/evervolv/20120507/Evervolv-Perdo-2.2.0a3-passion.tar.bz2
Evervolv-Perdo-2.2.0a2 (4/13)
Bulgarian keylayout, Dutch dictionary added
working google backup/restore (RMerlin)
Volwake/music controls can now be used concurrenly
battery percent icon by default
lockscreen sound toggle icon now updates properly
bluetooth tethering (untested)
attempt to resolve auto button backlights being too bright in low light
audio files have been restructured. you might have to reset your ringtone / notification settings (not needed if you wipe)
kernel update sha/memcpy optimizations one ondemand gov update (per my wip19 branch)(been using for a week with no issues)
ZIP: http://goo.im/devs/evervolv/20120413/Evervolv-Perdo-2.2.0a2-passion.zip
TARBALL: http://goo.im/devs/evervolv/20120413/Evervolv-Perdo-2.2.0a2-passion.tar.bz2
Evervolv-Perdo-2.2.0a1 (4/2)
merge android 4.0.4
finish merge for omx in framework (still not working, falls back to sw)
removed barcode patch from camera (more stable pictures)(so no panorama,video or barcode now)
ZIP: http://goo.im/devs/evervolv/20120402/Evervolv-Perdo-2.2.0a1-passion.zip
TARBALL: http://goo.im/devs/evervolv/20120402/Evervolv-Perdo-2.2.0a1-passion.tar.bz2
For older builds look at Post#3.
Older Builds
Evervolv-Perdo-2.1.0p14 (3/27)
update to gralloc/hwcomposer (slightly smoother)
enable singlepdp ril feature. (should allow easier apn switching)
omx libs included. native hw assisted video not complete in framework (although youtube hq now utilizes the adsp heap, so that progress)
wifi: eap pwd support
mms: misc updates
kernel rebuild with xz compressed, genlock update
much better multitouch experience (theomy)
camera preview works (kushdeck) barcode scanning (tested w/ google goggles) (panorama, video have issues, also there is a memory leak, leaving the camera app open for 2+min will cause OOM to kill the system server possible causing a reboot)
ZIP: http://goo-inside.me/devs/evervolv/20120327/Evervolv-Perdo-2.1.0p14-passion.zip
TARBALL: http://goo-inside.me/devs/evervolv/20120327/Evervolv-Perdo-2.1.0p14-passion.tar.bz2
Evervolv-Perdo-2.1.0p13 (3/15)
Redemption for p12
ZIP: http://goo-inside.me/devs/evervolv/20120315/Evervolv-Perdo-2.1.0p13-passion.zip
TARBALL: http://goo-inside.me/devs/evervolv/20120315/Evervolv-Perdo-2.1.0p13-passion.tar.bz2
Evervolv-Perdo-2.1.0p12 3/12
Nothing major, but many small changes/optimizations
youtube standard def clips shouldnt stutter (color banding still happens)
evtoolbox: statusbar icons: battery % mod from mongoosehelix
standalone powerwidgets from preludedrew
We will be using goo-inside.me for hosting from now on.
TARBALL pulled
ZIP pulled
Evervolv-Perdo-2.1.0p11-passion (2/27)
Phone should not lockup anymore when rotating display. Landscape mode is still strange, status bar is rendered halfway off screen...but only when rotating right...going left its fine.
Moved to cayniarbs stock(ish) kernel with my kgsl commits and ksm/zram backported from 3.0
EVtoolbox: new menu 'performance' control zram(aka compcache) and ksm, both disabled by default. ksm will reduce memory overhead by 10-15mb with minimal cpu usage (0-1%). ive read that ksm likes to have swap (10% zram should be enough) but youll have to experiment and see. also added 'processor' menu (also from cm) to view/control cpu stats.
Apps2sd: support moving /data/data, (run 'a2sd install' again and choose y when asked about appdata) im still wary of how to handle wipes when appdata2sd is active. so ive added two functions to a2sd: 'nodatasd' which removes appdata2sd flag and optionally removes the appdata from sdcard and 'nosysdata' which removes only the system appdata (ie anything starting with com.android) from the sdcard
Browser: i revised hwcomposer. redering is faster < 1 to 2 secs max under heavy scrolling
Camera preview is still broke.
Devhost was broke while i was uploading this so everything is just up on the mirror site.
http://code.google.com/p/texasice-cream-sandwich-mirror/downloads/list
Evervolv-Perdo-2.1.0p10-passion (2/21)
Rebooting issues should be resovled
Added /system/etc/sysctl.conf to set various vm values. Feel free to modify to your liking
Fastboot imgs: http://dev-host.org/SS3
Flashable zip: http://dev-host.org/Lsh
Evervolv-Perdo-2.1.0p9 (2/16)
whats new:
kernel update: 32bit color (fixes gradient backgrounds)
hwcomposer: rewrote from scratch for qsd8k. (main fix is screen off animation)
statusbar: new toolbox, settings button back to opening settings (swipe to change screens). notifications back to stock behavior. toolbox can even be turned off in evtoolbox
browser: slowed rendering, (fuzzy text takes a few seconds to clear up) is much faster now. (1-2 sec instead of 4-5)
known issues:
reboots: check here for initial workaround
removed omx libs due to build error (just use the ones from p8 if you really want them)
rotation still broke, seems to lockup the most on the home screen.
Code:
kgsl kgsl-3d0: |kgsl_mh_intrcallback| axi write error interrupt
and everything else that was broke in p8
updated bug list thanks mrhohoha
Gapps not included:
Flashable zip: http://dev-host.org/zCx 100.48 MB
Fastboot imgs: http://dev-host.org/KfW 98.69 MB
Evervolv-Perdo-2.1.0p8 (2/10)
Going forward with release. Nothing major changed since pre-p8. Still same major issues as outlined >here<. But its working good enough mainly releasing for those itching to try out chrome beta.
Whats new?
Massive kernel upgrade: misc wifi updates, fix ext 2/3 mountisg issues, add in call recording feature, updated kgsl (3d driver) to version 3.3 (cherry-picked partial upgrade to 3.7), other misc updates required for new kgsl driver. source is temporarily at https://github.com/drewis/tiamat-kernel/tree/wip9
Rom: now build with proper ICS OPENGL support (ie 100% hardware accelerated)(well more like 80-90% for now). I still have several issues to sort before hwa is working properly but this is a great start (imo). Screen off animation not working due to hwcomposer issue.
Notes:
This build is much less stable than p7 (or lower) but faster
You must turn off auto rotate in Display Settings or you will experience lockups that require a battery pull. (i know whats causing it but it will be a fairly difficult fix)
kernel build #119 which means i build the kernel 119 times to get this far, and that number is much much lower than the actual number of times i built the kernel before i got it booting and (mostly) working. Just something to think about, in terms of how much work it took to get this far
camera preview dont work but still takes pictures. also does not include rapmv78 newest fixes for panorama and barcode (didn't seem necessary to include them sinc camera preview doesnt work)
Gapps need to be flashed separetly.
Fastboot: http://dev-host.org/FxQ 99.31 MB
flashable zip: http://dev-host.org/VMr 101.00 MB
Evervolv-Perdo-2.1.0p7 (1/28)
camera libs now built from source.
fix the tiny mms pics for t-mobile.
removed prebuilt omx libs so hw video decoding wont work anymore. (these will be added later when we merge the source from cafs)
updated gapps: paid apps should work now
autobrightness should be working better
flashable zip
Evervolv-Perdo-2.1.0p7-passion.zip - 126.0 MB
fastboot images
Evervolv-Perdo-2.1.0p7-passion.tar.bz2 - 124.8 MB
Evervolv-Perdo-2.1.0p6 (1/16)
lockscreen: can choose whatever you want for the actions in evtoolbox (i'll fix up the "waves" for next time)
evtoolbox: lockscreen stuff - new submenu: interface with tbwake toggle (this was a fucing ***** to make work), vol wake, vol music contols moved here. - sixbar signal toggle in statusbar menu
camera: newer libs from rapmv78 for video
a2sd: added 'checkext' to fix errors on sd-ext partition (you dont need to run this...its already being done on every boot)
kernel: revert to p4 version
gapps included:
flashable zip:Evervolv-Perdo-2.1.0p6-passion.zip - 125.3 MB
fastboot images: Evervolv-Perdo-2.1.0p6-passion.tar.bz2 - 124.0 MB
calendar fix http://forum.xda-developers.com/showpost.php?p=21465864&postcount=1606
Evervolv-Perdo-2.1.0p5 (1/9)
whats new in p5 wipe recommended
notification toolbox: tap settings icon to switch between, long press to open settings
lockscreen: volumebutton music control
lockscreen: nullpointerexception soft reboot issue resolved
kernel: rebuild based on latest from tiamat
6barsignal: new drawables
camera: rapmv78 libs
launcher2: a couple options like hide search bar (there are a few options in the launcher settings that dont do anything yet, the only working opiton is hide search bar)
UMS: should properly detect plug/unplug events now (this is where the wipe is recommended if its not working for you, its cause the old not working settings are saved)
misc: new bootanimation from Bexton
latinime: more dictionaries
apps2sd: rewrote for more awesomeness see: ->here<-
gapps included
flashable zip: Evervolv-Perdo-2.1.0p5-passion.zip - 128.4 MB
fastboot images: Evervolv-Perdo-2.1.0p5-passion.tar.bz2 - 127.4 MB
Evervolv-Perdo-2.1.0p4 (12/31)
whats new in p4
6bar signal strength icons
Lockscreen: bring back tab and rotary style, defalut 3way ics style can now choose what app you want. all options in EVToolbox (all thanks to preludedrew...i did pretty much nothing lol)
Rebuilt kernel: still based on Evervolv/tiamat-kernel 8x50 branch
cyan trackball notifications (samuaz)
facebook sync in contacts
About the power button and reboots: i have been unable to reproduce it so i dont know whats causing it
And i think thats it enjoy your new year.
(gapps included)
Fastboot img's: Evervolv-Perdo-2.1.0p4-passion.tar.bz2 - 123.7 MB
Flashable zip: Evervolv-Perdo-2.1.0p4-passion.zip - 124.3 MB
Whats new in p3
Phone: can now disable voicemail notifications (added as many translations as i could so if i missed you let me know)
Lockscreen: experimental new 3way style (silent toggle / unlock / open messaging app)
(will eventually let user choose between lockscreens) (feedback please)
Mobile Network: auto connect fixed? (thanks samuaz) (please report)
New kernel based on tiamat 8x50 2.6.38.8 w/ smartass gov (please report all problems / fixes)
Note: new kernel does not bring hw accel (everything should be mostly the same as the pershoots one)
Apps2sd: modded scripts.
now has dalvik-cache to sd. just run 'a2sd install' again to activate
swap support (if you have a swap partiton on your sdcard)
new help menu run 'a2sd' without arguments to see
Note: all apps2sd info is logged in logcat. Its at the very beginning under the evervolv banner.
USB: native usb mass storage - almost but not working yet (but we're closer)
Note: even though it doest work we now have some annoying usb and adb icons persistent in status bar. sorry i tried to rush the usb fix into this build and didnt feel like taking it out after it didnt work. (we're gonna start porting new usb gadget eventually to fix this)
(gapps included)
Fastboot img's: Evervolv-Perdo-2.1.0p3-passion.tar.bz2 - 124.5 MB
Flashable zip: Evervolv-Perdo-2.1.0p3-passion.zip - 124.9 MB
Rebuild of Evervolv-Perdo-2.1.0p2-passion
Modded a2sd. Doesn't auto install anymore. Run 'a2sd install' (only need to one time. after that wipes (thats fastboot wipes) won't affect it. it just needs to set a flag on /sd-ext)
Trackball wake (yes you heard me (well read me)) Trackball wake
Merry christmas
Full version for custom BLACKROSE only: (eng build)
Img's for fastboot (w/ Gapps): Evervolv-Perdo-2.1.0p2-passion-tbwake.tar.bz2 - 123.9 MB
Flashable zip: Evervolv-Perdo-2.1.0p2-passion-tbwake.zip - 124.1 MB
Evervolv-Perdo-2.1.0p2-passion
Init.d support.
Included my homebrew a2sd that just sets /sd-ext/app and app-private on the first boot (assuming you wiped with fastboot (actually i think it works without wiping as well but untested)) all the apps already on /sd-ext will then show up without further involvement. (if you wiped with recovery it probably removed the apps on /sd-ext. You can prevent this by going to advanced and only wiping cache and userdata.)
If you dont want that. remove /system/etc/init.d/05mountext and 10apps2sd then flash dark tremors.
Google TTS should now work (was missing a library)
SuperUser should be working.
Removed some extra fonts (saves like 2mb)
e2fsprogs and bash are actually included in this one.
Full version for custom BLACKROSE only: (eng build)
Img's for fastboot (w/ Gapps): Evervolv-Perdo-2.1.0p2-passion.tar.bz2 - 123.8 MB
Flashable zip: (w/ gapps): Evervolv-Perdo-2.1.0p2-passion.zip - 124.4 MB
Evervolv-Perdo-2.1.0p1
merge 4.0.3, trackball works (thanks jaybob413)
Full version for custom BLACKROSE only: (eng build)
Img's for fastboot: Evervolv-Perdo-2.1.0p1-passion.tar.bz2 - 99.0 MB
Flashable zip: Evervolv-Perdo-2.1.0p1-passion.zip - 100.0 MB
Gapps: gapps_ev-ics_12-13-2011.zip - 25.4 MB
New boot.img for 2.1.0p1
Includes init.d support -> tested and working with Darktremor Apps2SD 2.7.5.3 Beta 4a
Removed genlock from kernel: Possible fix for lockups.
boot-12192011.img - 1.9 MB
EV-Alpha3 as flashable zips
Evervolv-Perdo-2.0.0p3-ITL41D-passion.zip - 101.1 MB
Merge in surfacetexture mod by rapmv78. No more "unable to dequeue native buffer" errors.
So this is basically a combination of rmcc, TwistedUmbrella, and rapmv78 egl mods.
It seems very smooth and usable therefore; im am releasing two builds one for blackrose(the one i posted), one for stock.
You might get a random offset error but it will still work just fine.
Evervolv Gapps:gapps_evervolv_ICS.zip - 26.0 MB
EV-Alpha2 ics-passion-ev-alpha2.tar.bz2 - 129.5 MB
Stock Evervolv with these additions:
Merged it TwistedUmbrella egl mods
Added gapps, Bexton's UMS with notifications, bash, htop, rsync, other cmdline goodies
Use N1 boot animation
Gallery works, Maps work.
Haven't had a single crash in 1 hour (make that 2 hours) of use so far. I even watched a video on youtube.
Might be the best one yet (let me know).
Proc usage while playing youtube video:
EV-Alpha1 ics-passion-ev-alpha1.tar.bz2 - 127.2 MB
I joined with the Evervolv team.
This is stock evervolv ics (with my passion device directories).
These are build without opengl but with the rmcc egl hacks and the old gralloc.
This is an eng build with strictmode disabled. So all 'extras' that come with eng are included. (except strict mode)
I added gapps. and Bextons usb mass storage app.
Tested sound and gps they work.
Other than that gallery crashes, boot animation is too small, maps won't load.
Pedlars notification widget and CMSettings aren't in this one.
Nothing drastically different from alpha13. Just a different build tree.
Alpha13r1 ics-passion-alpha13r1.tar.bz2 - 134.3 MB
Exactly the same as alpha13 but without opengl enabled.
Difference: Notably slower, but all the apps work and no crashes. This is much more usable than alpha13. Im gonna stop messing with opengl until we get a proper kernel.
Alpha13 ics-passion-alpha13.tar.bz2 - 131.4 MB
In my failure to bring real hardware accelaration; here's a little hack for you.
There is alot of hype floating around about hardware (gpu) acceleration. The truth is nobody with adreno gpu has it. They only have software acceleration. Some have gotten it to work better than others. Personally i have not put very much time into the 'software hacks' being used. Because heavy kernel mods need to be made to get proper gpu acceleration; on this I have spend nearly 40 hours on with no notable progress made. I'd say in total I have spent 200+ hours trying to make this rom work but it really isn't an easy task. This rom is still very unstable and won't ever work properly until we have proper gpu acceleration. For general purpose (ie. Calls, Messaging, Web Browsing, Music) it works fine, please dont expect more from it. Thanks for testing.
Includes latest from CM.
Ril has these options available in build.prop:
ro.telephony.ril.v3=signalstrength,skipbrokendatacall,facilitylock,datacall,icccardstatus
Only one that is enabled is signalstrength. You can try a combination of them an see if it fixes your data issues.
Fixed (from alpha12): Sound, GPS, Mobile signal, Enable opengl (w/ software hack)
Removed DTApps2sd since it won't work without init.d support.
Gallery keeps force closing. Don't know why.
Settings keep crashing. Don't know why.
Alpha12 ics-passion-alpha12.tar.bz2 - 123.0 MB
EDIT: DO NOT DOWNLOAD THIS. Looks like sound is broken too. Looks like alpha10 is the best bet sofar. Only downhill from there.
EDIT2: err looks like you can push audio.primary.qsd8k and audio_policy.qsd8k to get sound back. (untested)
EDIT3: I was wondering why system size was so much smaller lol.
DISABLE OPENGL: The HWA hack just sucks too much.
Use N1 stock bootanimation. It's cooler. (Oh, and I don't care what you think)
set config_hspa_data_distinguishable to true (Get an H instead of 3g)(I like it more)
Add some overlay items from crespo
Add some optimization cc flags
There were a couple ril changes to cm, maybe this will fix your data issues?
It seems Gallery will not work unless opengl is enabled (regardless of dalvik heap size)
Add htop, powertop, nano, vim, e2fsprogs (when using adb shell type bash to get them to work)
Remove Maps: So you can install the market version.
GPS is broke. It couldn't get it to build so just copied gps.mahmahi from previous build but that didnt work. I'll sort it out later. If you need gps dont upgrade.
Added Darktremor's Apps2sd modified for native bash support (in xbin). But it is not working. /sd-ext is not being mounted. It wont execute at runtime. The way it is set up. init.rc calls etc/init.local.rc calls bin/sysinit calls xbin/run-parts which calls etc/init.d/05mountsd now for somereason 05mountsd is not installed as executable even though it is executable in my out folder. changing 05mountsd to executable afterward still doesnt work. maybe someone can help me out here. my thought is init.d isn't setup properly. Also i would like to keep sysinit (or run-parts) being called from init.local.rc to keep init.rc and init.mahimahi.rc cleaner.
Alpha11 ics-passion-alpha11.tar.bz2 - 130.0 MB Alpha11 is provided out of courtesy and is not supported my me complains about it will be ignored.
system img is ~210MB
aosp apps updated to r1.2
Turn off lockscreen/touchscreen sounds
Decrease animaition by 50% (forgot to change back when added opengl)(increase till your hearts content)
Increase pointer speed to 100 (clicking still doesnt work but hey fast cursor lol)
Update to wpa_supplicant 8 (fixes wifi icon)
Enable OPENGL: Pulled HWA fixes from preludedrew's (evervolv) repo. (NOTE: not real HWA but better)(May exerience significant battery drain)
Update adreno blobs from inc evervolv repo
**W/HardwareRenderer( 1557): Mountain View, we've had a problem here. Switching back to software rendering.**
Add Pedlar's CMSettings (experimental WIP) (has 2 icons don't ***** about it)
Add bash,nano,vim,ncurses,ssh,rsync
Alpha10 Link
Added:
SHA256 crypto to kernel
fuse module to system (for future extended data on sdcard)
Camera app (camera still broke)
Stk
TitaniumBackup
LatinImeDictionary
GoogleCalendar (1st in appdrawer is AOSP if sync doesn't work for you just remove Calendar.apk and use CalendarGoogle.apk)
FileManager (from CM)
**Pedlar's notification power widget (still in WIP stage) Install this to allow configuration.
Resized bootanimation
Correct location/name of some permission files
Removed:
qralloc.qsd8k (slows down UI on not HWAccel builds)(Also removed in Alpha9)
Alpha9 Link
First taste of CM9
Kernel: Kanged pershoots with netstats ported by me from teamhacksung.
Thanks texasice, great work! Will test now. To clarify, is the partition layout mandatory? I have blackrose and can change it myself, but any rationale on this 220/16/200 layout in particular would be helpful.
olm3ca said:
Thanks texasice, great work! Will test now. To clarify, is the partition layout mandatory? I have blackrose and can change it myself, but any rationale on this 220/16/200 layout in particular would be helpful.
Click to expand...
Click to collapse
Any system partition with 200MB or more will work [But the ramdisk is setup for the sys220/cache16/data200 it should still work with other layouts though]
How is texting speed on this one without HW Accel?
bnguyen1983 said:
How is texting speed on this one without HW Accel?
Click to expand...
Click to collapse
I removed gralloc from this build so it is much faster than alpha8. Texting is fine for my slow fingers
So what is to become of the stock Rom?
Sent from my HTC Sensation Z710e using XDA App
Thanks for your hard work, really apreciated
Nexus One - Tapatalk
this is exciting.
And my N1 lives again. This is awesome.
I sometimes do get frustrated by lack of processor and memory. but I just can't seem to upgrade from my N1. Maybe if I get ICS on my N1 I might not have to.
Sent from my Nexus One using XDA App
sl8125 said:
And my N1 lives again. This is awesome.
I sometimes do get frustrated by lack of processor and memory. but I just can't seem to upgrade from my N1. Maybe if I get ICS on my N1 I might not have to.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Thats the idea lol. If i could afford a new phone i would get a a galaxy nexus. But im poor so nexus one gets all my love
Even without hardware accel, alpha 9 feels pretty usable.
Thanks for your efforts - great work!
If do this...does it mean that changing Roms is not as simple as just going into recovery and flashing the ROM? Does it take more steps like changing the partition again?
Reserved Spot for later =D
SiNJiN76 said:
If do this...does it mean that changing Roms is not as simple as just going into recovery and flashing the ROM? Does it take more steps like changing the partition again?
Click to expand...
Click to collapse
Simply no. You have a couple options. 1 you can flash the cm7 i built and keep the my new repartitioned hboot. (This is where you need the recovery i provided to flash the cm gapps) 2. You can reflash the 'standard' blackrose hboot and put any rom you want on it. (Without installing my recovery)
Either way blackrose is mandatory. System img is ~192mb so it is too big for stock hboot. So the system partition needs to be grown.
Looks good!
But I will have to wait a little longer to dust off my N1 to try this, because I have a broken power button so I need trackball wake!
j00m said:
Mod edit: trololo
Click to expand...
Click to collapse
I assume you can make CM9 yourself.
Maybe you are the last person to try to use CM9 with blackrose.
Right?
I don't know why you hate blackrose
It's not possible. System apps MUST be on NAND. Period.
Sorry if im a bit rougth but you have to realize that google banned the ICS for N1 due the small system partition. They dont want to upgrade HBOOT because is so dangerous to do via OTA.
j00m said:
Mod edit: trololo
Click to expand...
Click to collapse
Stop spamming.
If you do not want this, then don't use it.
Threatening Devs in dev thread seems very inappropriate.
Sent from my Nexus One using xda premium