Related
Brown housing on Ebay
http://cgi.ebay.co.uk/T-Mobile-G1-G...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318
black as well if you search, just bought a brown meself! woop.
how are u planning to take it apart?
i wanna get the white housing when it comes out.. but i;m afraid to take it apart
White G1 Housing, Attempt
I have just purchased a white g1 Housing set for $50, don't call me retarded, money wasn't really an issue for me and I hate the bronze color. Anyway, has anyone actually attempted this and successfully got it functioning afterwards? Any quick replies would be awesome, ty!
do a search for the service manual. Its floating around out there. This gives a step by step on how to take apart and put back together the dream
http://forum.xda-developers.com/showthread.php?t=468673
Let me know how this goes. Curious as to the difficulty level.
What condition is your bronze casing in? lol I have a black, but prefer the bronze.
It's in perfect condition, I only got the phone like 2 weeks ago. No scratches or scuffs, I just prefer a different color. I'm going to give this thing a go lol, unless you're talking about a trade or something.
as long as you follow the service manual perfectly (it's pretty in-depth) then you should have no problems. doesn't look too hard to take apart, just ****ing time consuming
wanna link me to the website where you bought this housing?
i wanted white also.
http://cgi.ebay.com/OEM-FULL-WHITE-...temQQimsxZ20090106?IMSfp=TL090106117008r14624
I'm be interested to know how the transformation goes. I'm not really interested in changin my blakc to any other color, but I'd love to get Telefonica's modded chin installed on my phone http://htcsource.com/index.php/Android/Telefonica-to-launch-HTC-Dream-with-a-facelift.html
nickmgray said:
I'm be interested to know how the transformation goes. I'm not really interested in changin my blakc to any other color, but I'd love to get Telefonica's modded chin installed on my phone http://htcsource.com/index.php/Android/Telefonica-to-launch-HTC-Dream-with-a-facelift.html
Click to expand...
Click to collapse
Yeah, I'd like to try doing that once it comes out, too!
Any updates with the conversion? Like to know if fitment was exact, etc. Really looking into the modified chin though
Anyone found a replacement housing with memory card cover?
I have dropped my phone and will be eventually looking to replace the housing.
But all the adverts on ebay(uk), none of them seem to list the memory card cover. I could use my original, but I kinda fancy a change to white! ;-)
Anyone know where to get this cover?
Thanks,
Really really sorry to bump this.....
Anyone had any luck finding spare G1 memory card covers?
Little surprised no one else is interested in this issue, especially if they fancy changing their housing (for repair/colour change) in the future.
As far as I can see, none of the sellers on ebay include this cover, so don't lose it or wreck it!
I dont think the G1 has enough of a market to mass produce housings, ebay is prob your best bet. You can try contacting HTC and see if they can give you a lead but other than that I think you'll have to look for someone with a bricked phone.
EDIT: Sorry, forgot u were lookin for mem card cover
@Edit: No problem; glad you noticed before I got round to typing reply!
Like I said, every single ebay listing I have seen does not include it.
Just seems a strange thing to for them to miss out, anyone know a reason?
http://www.colorwarepc.com/p-170-tmobile-g1.aspx
lun4tik said:
http://www.colorwarepc.com/p-170-tmobile-g1.aspx
Click to expand...
Click to collapse
yah.. no.. you have to send in your phone to them and they paint it or you can get it from them prepainted....
yeah as ya can tell from the torx thread i bought that ebay one planing to change to white as well and its not as simple as i thought when i started i don't think anyone includes one and the main piece the one that the keyboard is attached to has a metal cover that appears to be glued in place and i could not move it to the one i received with the new housing which is why i decided to go with the 2 tone look. http://stryph.googlepages.com/DSCF2807.JPG Also.. the ebay crap is cheaper than Phuk its allready cracked on me a bit WTF? will post more pics l8r just got in from the fight *wtf man wtf??* (Hope hatton recovers completely and suffered no permanent damage)
VR4Stryph said:
yah.. no.. you have to send in your phone to them and they paint it or you can get it from them prepainted....
yeah as ya can tell from the torx thread i bought that ebay one planing to change to white as well and its not as simple as i thought when i started i don't think anyone includes one and the main piece the one that the keyboard is attached to has a metal cover that appears to be glued in place and i could not move it to the one i received with the new housing which is why i decided to go with the 2 tone look. http://stryph.googlepages.com/DSCF2807.JPG Also.. the ebay crap is cheaper than Phuk its allready cracked on me a bit WTF? will post more pics l8r just got in from the fight *wtf man wtf??* (Hope hatton recovers completely and suffered no permanent damage)
Click to expand...
Click to collapse
Wow I kinda dig that two tone look. how hard was it to switch out? Waiting for more pics...
off topic: yeah man I really didn't think hatton would go down so fast and hard. I really thought it would be a better fight than De La Hoya. Hope he's ok tho!
Has anyone replaced the little plastic flap that covers the USB port? Mine has finally broken off.
Is there anywhere to get a replacement online, and is there a resource for disassembly for the g1?
TIA
My device (Touch PRO) doesn't have it at all. I've seen that some devices have it and some don't. I think you can compare it to suspension housing of mountain bikes - some have some don't. It is just a question of dirt management style. While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good. I don't think there is a good answer
I dont think he is looking for an opinion, I think he just flat out wants one. I could use one too, mine is broken as well.
As far as replacing, you can carefully insert it using a blunt pointed pin, I used some piano wire that was lying around when I did this to my last G1. Just "push" the ball into the housing. Alternately, you can use the plastic pry tools to lift that area, but it is a lot more work.
darfri said:
While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good
Click to expand...
Click to collapse
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
gospeed.racer said:
I dont think he is looking for an opinion, I think he just flat out wants one.
Click to expand...
Click to collapse
Who comes to XDA not expecting an opinion? So does anyone know if replacements are available?
bittermormon said:
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
Click to expand...
Click to collapse
Exactly what I'm thinking! Mine broke recently and I actually like my phone without it better. However, as soon as my contract expires, I will want to sell my phone and get N1, so I think having all parts in place would be helpful, but I can't find it anywhere
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
That might work. I'll order some and then post pictures.
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
Nice find
Karolis said:
That might work. I'll order some and then post pictures.
Click to expand...
Click to collapse
Looking forward to it.
I'm in the UK and they ship from the US, so it might take a while. I've ordered it on 15th and got a shipping confirmation the next day, so hopefully some time next week I'll have them.
OK, got them... and I think it's a bit of a waste of money. They're too small and also when you need to for example plug-in the headphones, you have to figure out where to put those flaps not to loose them.
Anyway, you decide:
How does one go about removing them? I've done a google and XDA-Forums search and found that there are numerous answers all seemingly discounted by any number of people:
toothpaste, no good for capacitive screens
Displex sure, THEY say it's good for the TP2, but so many people say not
So, anyone have any ideas.
And, yes, I know, screenguards are great and the holy grail. I don't have one. So, please, I know I am asking for a cause that I probably could have prevented, but every time I put a screenguard on my device, it was much too mushy and I tried a lot of them.
Thanks in advance.
I would also like to know how to remove the scratches on the screen. The screen guards make the touch screen less sensative. Theres got to be some type of wax or something.
I've used the screen guard that came with my TP2 since day one. My screen is still pretty darn sensitive....
I have skinomi on my tp2 and although it takes alot of patience to put it works flawlessly...ive tried scratching it with keys and the thing just wont scratch!! its awesome..its a bit on the expensive side if you get the entire skin for the phone like i did but its worth the money in my opinion.
go to skinomi.com
I guess T-Cut might work, i used it on my dads samsung and it cleared up the screen some.
When i was a kid we used to wear swatch watches which always got scratched up, we used to use Duraglit made by Brasso which is a metal polish wadding...kinda like cotton wool with a light abrasive in it, which worked wonders!
Something with very light abrasive properties(like toothpaste) should do it but watch out for any solvents and chemicals in the product that may react with or even MELT the plastic!!!!!
most things like T-Cut scratch remover just take a lot of time and patience.
I anything works for you re-post and let us know!
Actually Displex tells you not to use its product on resistive touch-screens.
Anyway, I just ordered iDrops about a week ago and have been trying it for the last day with no results, at all. I've tried variable amounts of pressure, dozens of applications as the instructions say and I've only hurt my phone. All it does it put a strange texture on your phone that makes it grainy and more susceptible to scratches. Even my stylus scratches the phone, now! I had to use a wet cloth to get the graininess away.
My recommendation is not to bother with iDrops. It seems to not work for the TP2.
Hmm, its just an idea but I've been repairing my windscreen today using special resin that cures in direct sunlight. I must say it works pretty well, it's hard to notice the repair. I would try t-cut or other mild abbrasive to get rid of light scratches and fill really bad ones with that resin. Next comes a good screen protector to hide any imperfections.
thanks, but WHAT website
spammmer said:
if your touch screen is very scratch or broken, you can just buy the new touch screen and then replace it, it is easy to do. I also has instruction. you can visit my website.
thanks
Click to expand...
Click to collapse
I see your post, yet, I have no idea what website to which you refer. Nevermind, didn't realize it was in your header.
Why do you not send instructions with the order? IF you're selling replacement parts why then must a customer have to contact you for replacement instructions?
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Not disputing that fact
petard said:
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Click to expand...
Click to collapse
Just questioning that if they sell the parts, why must the instructions be emailed separately?
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
BBM-Lee said:
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
Click to expand...
Click to collapse
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
petard said:
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
Click to expand...
Click to collapse
Correct me if I'm wrong but changing this digitizer would void warranty if I were to change it myself ? ?
Go to At&t and see if they will replace it for you if you buy the digitizer. If not ask At&t or find a reputable place that does, ive seen for around $50 which was suggested to me by at&t. It's worth the money trust me! When I had my old LG Incite, I tried replacing the digitizer because my screen was scratched and ended up breaking the lock and camera buttons as well as the touch screen. Since then every phone i've had gets a case and screen protector from the day I lay eyes on it. If the case and screen protector are their after I get my phone I wont use it till their on. Scratches just annoy me but I guess i'm just odd lol.
Had a small hairline crack across the screen.
So I purchased a replacement glass,
watched several youtube videos on how to change the glass (phone was working perfectly)
came off no problem, very easy as a matter of fact.
replaced with new glass.
phone turns on, nothing goes on the screen.
what happened? did I ruin the digitizer?
never touched it with the razor knife one time but it did have a few flakes of glass on it so I lightly brushed them off with a hairless cloth.
what I do????
****.
it turns on and if I call it, it rings but dead screen.
how did I kill it?
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Why did YOU fixed it yourself?
Anyway, check if all something is not connected...
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
I'm not an expert but if it turned on before but now it doesn't, its dead jim. You probably heated it up too much. I think the suggested heat is 170-180 F.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
my second post. " IT TURNS ON but the screen does not."
I can call it and it will ring BUT THE SCREEN DOES NOT TURN ON!!!!
The screen is probably dead but I am hoping someone who knows about it can give me advice on how to maybe fix it.
that is the help I am looking for!
I believe only way to fix "it" at this point is to buy a new lcd which at this point youre better off buying one with the lcd-digi-glass. I say this because if there was a chance at slightly fixing a bad LCD it would involve hard work with tools beyond your reach and or experience.
Edit: Just out of curiosity, did you disconnect the LCD screen during the disassemble? Make sure its connected properly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pblocal said:
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
Click to expand...
Click to collapse
Oi! Don't get snappy!
He was trying to help you!
Little sh*ts like you should get banned!
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
BHARGAV33 said:
Anyway, check if all something is not connected...
Click to expand...
Click to collapse
pblocal said:
that is the response I get? seriously?
Click to expand...
Click to collapse
Seems fairly sensible question to ask, especially when your providing so few details. When you checked the screen immediately after connecting it up did it work? If so it's entirely possible one of the connectors has worked loose during re-assembly, if not it's always possible that the new screen was supplied faulty.
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
pblocal said:
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
Click to expand...
Click to collapse
Right. Now that is much better. If you would have asked like this from the beginning, we would have helped you.
Now, I personally haven't done this before, but what did you heat the phone up with?
It's possible that you have de-soldered some contacts for the screen's ribbon cable. If you have done that, you may want to open up the phone and check. If that is the case, I'd send it to Samsung or a repair centre. Of course, you'll get the same questions as here, but they should be able to help you. You could always send it to http://mobiletechvideos.com and check if they can do things like that for you, after all, they are a universal repair service.
I hope this helps you a little bit.
Oh, and don't say thanks, click it (Each and every answer. Even mine!)
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
pblocal said:
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Click to expand...
Click to collapse
Oh. By the way: bumping posts is against the community rules - It counts as spam. Next time I will report the post immediately.
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
pblocal said:
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
Click to expand...
Click to collapse
I'm glad you and the search engine have met
Yeah, that would explain a lot. I actually feel sorry for you, man. Good luck with getting that fixed!
yeah, the funny thing is, I searched all over google and did not think about searching here.
Why? I have no freaking clue. Just plain stupid of me.
I already sent an email request to mobiletechvideo.com. I hope they can fix it, if I send it to them.
Thanks for your helpful advice. This is what I was looking for.
(oh, and the repeat of the same statement from yesterday was not for a bump, it was a mistake. I did not see it so I posted it again. if you look it was only 5 minutes apart)
once again, thanks, I also hit your "thank you" meter!
pblocal said:
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Click to expand...
Click to collapse
that's not true though, it's just very difficult
Yep. Kid got a hold of it before case arrived. Yes its my fault. Should have kept better eye on him. There are only two bids on YouTube. Neither one is great. I see on eBay they have LCD and digitizer and housing. From vids it looks easy. But would like to hear from anyone who has done it. Thanks
So sorry for the breakage. Here is a video that seems pretty good, https://www.youtube.com/watch?v=qm6NwBvo6T0. The process doesn't seem to hard, to me. Good luck.
kimtyson said:
So sorry for the breakage. Here is a video that seems pretty good, https://www.youtube.com/watch?v=qm6NwBvo6T0. The process doesn't seem to hard, to me. Good luck.
Click to expand...
Click to collapse
I recently replaced the LCD screen on a OnePlus One, other than the size, it was almost identical to the Mate2. couple parts in different spots but it had enough of those #%(@!)% rice grain size screws that I put them on a magnet, to make sure I didn't lose them.
Yes. That is one of the vids I was talking about. The other one was actually for a mate. Not mate 2. The thing I don't understand on this video is he never actually gets to the part of the screen replacement. So, I am presuming that with this phone as long as I purchase the LCD+digitizer+frame. Then it will just be a matter of putting all the parts including board back in to it. On eBay there are choices. You can purchase just the glass or glass and digitizer or those plus what they call the frame. While on my phone. Only the outside glass is broken. I am going to buy the kit that has all three. I would give just replacing the glass a shot if I could find a video or tutorial. I have looked everywhere. Nothing. The closest thing I could find is the vid on youtube of the guy changing just the glass on his mate. Unfortunately, he never says a word in that vid. I guess it's just to show it can be done. I'm really stressed by all this. I would prefer to just change the glass if only I could find some info. I presume it is like a Samsung where glass is glued with local to digitizer. I have fixed those type on a s3 and note 2. Was not that hard. Just be sure to heat properly and don't scratch digitizer. With no idea of how it is done on this phone. I guess I will get the kit and hope for the best as of course. It has to come from China. Waiting....Thanks for the info and I will do my best to make a vid so others can learn from my mistakes? Lol or hopefully success.
Have a hair dryer or a heat gun handy just in case. On the OnePlus, the screen is "glued" somewhat, to the plastic frame. It is a LOT easier to separate if you heat is up a
bit. Just heat one side, then you the (as I like to call it) guitar pick tool to start to pry it up, then to a little more at a time, so you don't overheat the broken screen.
After you get the screen off, make sure you scrape around the edges of the frame, to ensure you remove any sticky residue. You don't need to heat up the new screen. Once you press it down, it will stick quite well.
If it were me I would get the entire kit and be done with it. There is too much that can go wrong with the hairdryer and peeling the old, broken screen from the digitizer. With the kit, it's just all screws and dismantling then put it back together. Much easier.
I hope that is right about the kit. The thing that scares me is what will the quality of the parts be like? I know my digitizer is fine. So I'm going to try the kit first. If it fails due to bad parts. Then I will still have the option of just doing the glass. The cheapest I saw for the glass was 18.00 bucks. The kit with shipping was 58.00....Not really a huge difference. Again its the quality of the parts that scares me. Of course the vid on youtube makes it look easy. But I'm sure he is doing it on a phone that has been torn down a few times. Its always easier then. As I said. I intend to video all this. If nothing else. There will at least be more info available to poor suckers like me..lol. Will see in a couple weeks if the Chinese ship time holds true...
I'd bet the quality is the same as OEM.
Sent from my MT2L03 using XDA Free mobile app
One other thing. Just wanted to ask. You say the one plus is about the same? Are you saying that because there similar in how their made? Or do you know something about where their made. Thanks for the info on the glass. I have done it on Sammy phones. Has to be similar. Kit is already coming. So I'll go that route first try. Wish your repair had been on a ham2. Then I would feel better. I guess I get to go first. Lol
kimtyson said:
I'd bet the quality is the same as OEM.
Sent from my MT2L03 using XDA Free mobile app
Click to expand...
Click to collapse
The one I ordered for the OPO looked identical, except the routing for the lcd screen connector was just a little different, but in no way caused a problem.
I wanted to update you guys on how the repair of my screen is going. I have some info to share and trust me. It is important if you ever need to DIY on this phone. Most are aware of the video on youtube. Ive watched it several times and I always got the feeeling it looked to easy. Well, my screen and dig assy came in today. I was going through the process of tearing it down and everything was going well. Untill i got to the part where you remove the power button cable. The one that runs along the side of the phone. I SHOULD HAVE KNOWEN. In his vid. He makes it look like this cable will come off with gentle pressue. BULL****. It wont. It is glued Tight and you will just winde up tearing it. I am so pissed. I wish he would have just said to buy the cable with the kit. Its 10 bucks on ebay of course. So, now I have a torn down phone waiting for the cable. I was making a video of the repair. When the cable comes in. I will finish it and upload to youtube. The other thing he makes look easy is the removal of battery. Again, its not and you could damage it too. But I managed not to. Anyway i am really upset right now so sorry for cussing. I want to find that dude and shake his hand and smack him at same time...
pckarma112 said:
I wanted to update you guys on how the repair of my screen is going. I have some info to share and trust me. It is important if you ever need to DIY on this phone. Most are aware of the video on youtube. Ive watched it several times and I always got the feeeling it looked to easy. Well, my screen and dig assy came in today. I was going through the process of tearing it down and everything was going well. Untill i got to the part where you remove the power button cable. The one that runs along the side of the phone. I SHOULD HAVE KNOWEN. In his vid. He makes it look like this cable will come off with gentle pressue. BULL****. It wont. It is glued Tight and you will just winde up tearing it. I am so pissed. I wish he would have just said to buy the cable with the kit. Its 10 bucks on ebay of course. So, now I have a torn down phone waiting for the cable. I was making a video of the repair. When the cable comes in. I will finish it and upload to youtube. The other thing he makes look easy is the removal of battery. Again, its not and you could damage it too. But I managed not to. Anyway i am really upset right now so sorry for cussing. I want to find that dude and shake his hand and smack him at same time...
Click to expand...
Click to collapse
I have worked on several phones. None are easy really. Most all companies use some type of adhesives. Alot glue the batteries in as well. Dunno if you tried it but heat seems to help with the glue. Seen a guy do it with a hair dryer. Worked for me as well with a screen replacement. Never took one of these apart so I have no idea if they use heat activated glue or not. Good luck!
Well Thanks for reply. I too have fixed a few. As long as I have something to guide me. Im Cool. Vid or written indtructions. Yes all phones use some sort of glue. With this one on the cable. Heat would not have helped. You would just melt the cable. I was expecting some adhesive. But not like this. This was not meant to be reused. Period. Thats my point. I wish he would just have said buy the cable. No way it is coming off in one pc. The speaker is also glued down extremely tight. I think I got it. Its still in one pc. Interesting enough. There also on ebay.
I really just want people to know about the power cable. If you have to replace screen on this phone. Get one. Your gona need it. Now it may be middle of july by the time I get the cable. I went ahead and tore everything else out of phone. Tomorrow I will put all back into new assy. But i wont know if it worked till cable gets here. I forgot to record taking out the other pcs. I was just to stressed. But I do have some good vid for most of it. Gripe is now over. il be back when cable gets in...
pckarma112 said:
Well Thanks for reply. I too have fixed a few. As long as I have something to guide me. Im Cool. Vid or written indtructions. Yes all phones use some sort of glue. With this one on the cable. Heat would not have helped. You would just melt the cable. I was expecting some adhesive. But not like this. This was not meant to be reused. Period. Thats my point. I wish he would just have said buy the cable. No way it is coming off in one pc. The speaker is also glued down extremely tight. I think I got it. Its still in one pc. Interesting enough. There also on ebay.
I really just want people to know about the power cable. If you have to replace screen on this phone. Get one. Your gona need it. Now it may be middle of july by the time I get the cable. I went ahead and tore everything else out of phone. Tomorrow I will put all back into new assy. But i wont know if it worked till cable gets here. I forgot to record taking out the other pcs. I was just to stressed. But I do have some good vid for most of it. Gripe is now over. il be back when cable gets in...
Click to expand...
Click to collapse
With any luck you may save someone else a headache!
pckarma112, so sorry for your frustration. Thanks for sharing your experience.
I was going to suggest the the same thing as Moody. Heat from a hair dryer usually helps soften the glue but isn't enough to destroy anything (usually).
Just so we are all understanding, can you show a pic or provide a link of what you purchased? Was it just a screen or an assembly?
Again, sorry for your issues. Hang in there.
Parts
Yes I can. That is if I can post links. So Il try. This is the link for the power cable: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemVersion&item=291410104104&view=all&tid=1181571120019 This I just ordered yesterday. The deleivery is anywhere from middle of July to second week of August. Im keeping my fingers crossed that I got a good vender and will get a good one. They say they have already shipped it and gave me a tracking number. But the number is not showing up yet. Ive seen this before with china stuff. I will give it a couple days and check again.>... The next one is for the screen kit: http://www.ebay.com/itm/141653108269?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT > Cant say enough good things about this vendor and kit. It looks and feels outstanding and I recieved it in two weeks from china. That is pretty darn good. Now, the only thing is since I have no power cable. I do not know for sure if I got a good one. But, like I said. It feels like a quality part. The last item is a phone repair kit that really helped with this job. The metal and plastic spudger really helped with battery and other small parts like camera and vibrator. For the price I suggest you get one. Here it is: http://www.ebay.com/itm/111501320079?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
As for the screw driver. Dont do what i did. I bought a cheapo 1.69$ one. It was crap. Lucky for me. I had one from a previous kit I bought and it worked fine. Hopefully these links will show up for you guys. If not I will try with a different browser.
Just so its clear. I do have a hair dryer that I keep for samsung screens. I thought about trying it on the cable. But I have worked on these kind before. There is a really fine line between warming the glue and melting the cable. This sucker had enough glue to hold the hoover damn together. Ive seen it before and Im pretty sure you would melt cable before the glue would give away. Thanks you guys for advise and just letting me vent. I do hope that anyone who attemps a repair can learn from my mistakes....lol. Thanks again.
I've been taking stuff apart and SOMETIMES successfully getting it back together for over 40 years, sometimes with the odd screw leftover, but hey, where do our extra screws come from eh?
I replaced the screen on the OnePlus for a friend a couple months ago and WOW, they need to make these screws JUST a LITTLE smaller, don't you think? I find that keeping a small magnet on hand comes in handy to keep track of those tiny a** screws.
pckarma112- Nice job on the post of Parts. Only problem is the first link failed. Said it was too old. Again, thanks for sharing and letting us learn from your mistakes.
Thanks for the *cough* compliments. The link is bad because seller is sold out. However, you can try this one:http://www.ebay.com/itm/111501320079?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT......If that does not work then there is this:http://www.ebay.com/itm/Black-LCD-D...412?pt=LH_DefaultDomain_0&hash=item3f3f160554 This is same only black. Again, these people really treated me well. Im sure there will be new auctions when he restocks. There are also plenty of others. Price varies a little. Im really delighted that you find small screws to be a pita. Thats just awsome. lol Keeping a piece of tape on the table really helps. Just drop them on to the tape and I promise you will never lose another one. I would really like for this thread to be helpful to anyone that gets unlucky. So, I am trying to be ernest about it all. That includes honesty with no hidden attitude. When I say thanks. I really mean it.
By the time and god willing the power cable arrives. I will hit the big 60. This will not be the last phone I ever repair( I hope). But it sure has been one of the most interesting. Thanks again guys and may your screws never be loose.
Thanks
p51d007 said:
I've been taking stuff apart and SOMETIMES successfully getting it back together for over 40 years, sometimes with the odd screw leftover, but hey, where do our extra screws come from eh?
I replaced the screen on the OnePlus for a friend a couple months ago and WOW, they need to make these screws JUST a LITTLE smaller, don't you think? I find that keeping a small magnet on hand comes in handy to keep track of those tiny a** screws.
Click to expand...
Click to collapse
Thank you. You gave me a good laugh and it was much needed today. In fact. Its needed everyday in this world. The kit of screw drivers that I own are indeed magnetized. Thank God. Seriously though. If you think these are small. Try repairing a watch. Now your talking micro. I have worked on about a dozen or so with my brother. He is a master clocksman. Makes good money still and when ever he needs help. I get to learn from him and make a little too. So, Im blessed. I also lost track of where a couple screws will go on this phone. But, got it figured out. It is nice to know that none of us are perfect. Thanks again bro.