Related
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
What file did you flash?
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
crazy25000 said:
What file did you flash?
Click to expand...
Click to collapse
Stupidly, I believed I Odin-ed a file named "T959UVJI6.rar". Which if I remember right, is a custom kernel. I never really understood the whole kernel ordeal. I used to have a motorola milestone, which, I would do all all sorts of things to with no problem. But, that never included kernels. And for the most part, it didn't have any hardware key lock.
I, think, I need to do the jig mod-y thingy.
mdi2001 said:
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I'm not sure how, because, apparently, my samsung's 3 keys are locked. I have tried so many times, but, it never works. Sadly.
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
s15274n said:
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
Click to expand...
Click to collapse
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
^ ironically it was the JI6 update that alleviated a lot of the "hardware locked" Vibrants.
Have you tryed making a JIG? It helps if you can't get into download mode
supaduparimy said:
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Click to expand...
Click to collapse
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
brisseau said:
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
Click to expand...
Click to collapse
Sadly, my samsung, was one of the newer models, that released with the combination lock. And so, no matter how much i have tried, it never worked.
I tried every technique I have seen. Nothing.
xXcybersniperXx said:
Have you tryed making a JIG? It helps if you can't get into download mode
Click to expand...
Click to collapse
Yes, I have, actually. I found it really hard though. Mainly because the wires were way too small. But, the reason I gave up, is because the resistor is larger then the wire, and so, needed very precise soldering. I could've used the back, but, all usbs are different; and the ones i had, were very much different then all the demonstrations videos i watched.
PS I am actually buying a stick online.
(I can't post link)
As my last resource, to something I must get done, I will pay whatever...
younix258 said:
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
Click to expand...
Click to collapse
Yes... yes...
Yeah, but from what I remember, that software, just forced the samsung into download or recovery mode. From there, then the person would just mod a file to change that. But, my phone wont even do as the force says.... in the first place... It has always, just stayed in the continuous boot phase...
If you have skype or any chat program, I can help you easily.
crazy25000 said:
If you have skype or any chat program, I can help you easily.
Click to expand...
Click to collapse
The reason I am in dire need for this android to work, is because, I have no other way of flourishing in life. It was the one thing that kept everything in balance. Stupid moto, now it physically dies
On another hand, I have a iPod Touch 1G, lol.
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Oxirane said:
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Click to expand...
Click to collapse
I wish there was a physical jig seller in Vancouver (where I live).
The button combos don't work on my phone. Sadly. It was the newly made models with the button combo block.
If it helps, before, when I could go into that option, I did it by using a toolkit and making it put me to recovery/download mode.
UPDATE! I had someone help me fix it, but he failed too. It now just hangs on the boot show thingy. (rather then flashing). Oddly, my cell can still access the computer, which I think is a good thing. As in, when I plug it while the screen stays put, my computers makes a sound. What could this mean? CMD to download mode?
As for boot loader, I highly doubt it. Since, I have had no reason to look-up what they are. ehhe.
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
supaduparimy said:
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
Click to expand...
Click to collapse
Are you using the Tmobile US vibrant or the bell/virgin canada vibrant?
SGH-T959 or I9000m?
If you have an I9000m you are in the wrong forum.
Oxirane said:
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Nononon, it is stuck on the galaxy text boot screen thingy. In other words, just like before, but this time it isnt flashing continuously. If it was the big yellow thingy, oh thank god... i wish.
As for that someone putting me in hardware lock, from my understanding, the only way to unbrick a locked device is through a jig. That being said, I searched up where I live for anyone with a jig, and to my luck, only one group had it. So I went there, and bam, it can now somewhat access the computer.
NOTE: I am going to receive a built jig in the mail in a few days.
From what I know, having a locked device, means, a jig is a must.
As for ADB, I am looking all over for instructions how to use that, but, I can't really find any through ones.
I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin.
I am really unfamiler with this samsung galaxy.
I did everything possible with ,y Motorola Milestone.
Awoooooo!!!! BAYWOLF's program Rules
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
dseldown said:
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
Click to expand...
Click to collapse
Ahha, thank you for the suggestion, but, that wont do. It was my original fix, towards getting into recovery/download mode. But, for some sad reason, it doesn't work for bricked devices. In simple, it just says device is not find. Ironicly, the computer makes a sound with the cell is plugged in, but, thats about it apparently.
Oh yes, the cell has to have USB debugging activated. But, since I have a bricked, it can't go within the phone to find it.
NOTE: it has always been in debugging mode.
Hi, everyone, I've recently HARD BRICKED my Samsung Galaxy MODEL: T959V with T-mobile. First off, I got pattern locked on my phone, yea I know I'm an idiot, LOL. Next I totally forgot my gmail password so I could not log back into my phone. So then I next decided to flash back to stock with odin 1.7 and T959UVJFD. tar file from this thread: http://forum.xda-developers.com/showthread.php?t=1047087. As a result, my phone would boot to the loading screen with the dashed circle and a battery display in the background and thus would not finish booting all the way. So I figured I would do more research and found that people would try flashing with the Eugene_2E_JK2_Froyo from this thread: http://forum.xda-developers.com/showthread.php?t=833024&page=49 and after flash back to stock. After I flashed with the Eugene rom this was when the phone completely died and would not turn on. I tried the take out the battery, holding down and up volume button and plugging into computer method but the computer would not detect it anymore. Now I don't know what to do. It won't turn on anymore and can't boot into download mode. Please help.. Thanks, and appreciate it.
I just got bricked too...Went to update my vibrant that was on eclair still...Try to update to froyo on Samsung Kies Mini...download went fine...then when finished...it wouldnt turn on....just ordered a JIG....should be here Tuesday...http://www.amazon.com/SainSmart-Don...73JQ/ref=sr_1_1?ie=UTF8&qid=1321751047&sr=8-1
and yes...my family on XDA...i tried every finger combination to try to get to download mode...Sitting outside waiting for ups as we speak...
You might need to look into a jtag, I wouldnt give up getting into download even if the screen is black. Some members have had sucess by pulling the battery, sim card and letting the vibrant settle for an hour or so. reset in odin and keep trying, your phone wont respond but odin may recognize it by the yellow com bubble.
im guessing u've tried this:
http://forum.xda-developers.com/showthread.php?t=848737
also read post #5 in this thread:
http://forum.xda-developers.com/showthread.php?t=1352334
be sure u understand what he says: he's basically just pretending the screen doesnt work and holding the buttons for the amount of time it would take to enter download mode. even tho the screen never responds, odin will suddenly recognize the phone. u can tell when this happens cuz that box in odin turns yellow. then flash JFD like normal or whatever ur gonna do.
good luck
Thanks for replying everyone.
Sugartibbs : I've been working on this all day. Yea, I definitely can't get it to work on odin. It's not being recognized at all. where can i get a jtag?
crypkilla : Yea I definately tried those two things already. I've searched all over the forum. I think it's time to take it in..... LOL. Is there a difference between the two models T959UV vs. T959V, in terms of the stock rom I was originally suppose to use?
that's a bummer.
i havent had a completely unresponsive phone before, but ive thought ive been pretty screwed a few times and the only other thing i know is that ive read people say that they've tried the same thing a hundred times and on the hundred and first time it worked and that's been my experience.
be sure and post if u do get lucky and fix it.
ascensi0n said:
Thanks for replying everyone.
Sugartibbs : I've been working on this all day. Yea, I definitely can't get it to work on odin. It's not being recognized at all. where can i get a jtag?
crypkilla : Yea I definately tried those two things already. I've searched all over the forum. I think it's time to take it in..... LOL. Is there a difference between the two models T959UV vs. T959V, in terms of the stock rom I was originally suppose to use?
Click to expand...
Click to collapse
You flashed wrong ROM and you're in wrong forum.
T-mobile Vibrant is T959
T-mobile Galaxy S 4G is T959V
T959UV is just a baseband not model number.
Sent from my T959 using XDA App
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
ascensi0n said:
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
Click to expand...
Click to collapse
First you need to get to download mode. Then try this
http://forum.xda-developers.com/showthread.php?t=1353176
Sent from my T959 using XDA App
ascensi0n said:
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
Click to expand...
Click to collapse
LOL i did the same thing ended up selling the phone :laugh:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway
Hi to everyone! Is my first thread here. I have a Samsung Vibrant SGH-T959 and try to update using Odin3 v1.85. Everything go well but at end apear Fail in Odin and the phone turn off. I think the phone go to restart but never turn on again and I can't turn on now. I press power botton and no response. I try to put it in download mode or recovery mode and I can't. What is next? I order a JIG, but a friend told me that no correct my problem.
One does not update via Odin (well 99% of the time IMO) Odin is usually used to revert to stock and reset partitions.
Did you have the repartition checked?
Did you try and flash a ROM or Boot loaders?
When you hook the phone to the computer and open up Odin does it still show a yellow box? If so flash back to JFD and start over.
If you tried to flash bootloaders your only hope of unbricking it may be a JTAG service (google it).
It may be late for you now...but a warning to others - Messing with Odin is one of the quickest ways to brick your phone. I dont think Ive ever actually heard of anyone hard brick a T959 without Odin.
Unless your updating the boot loader hard brick is near impossible. Odin is not to blame, and the risk is negligible.
My vibrant died a few days ago reverting to stock to deposit a check (so GPS would work). Sounds like the phone just died. Mine is hardware dead and sounds just like yours. Wont turn on or acknowledge a current when plugged into the charger.
BTW: Unlike some other phones, if you click re-partition on the Vibrant and have the pit file. You can repartition and it not muck up the phone... well unless the repartitioning itself went AWOL.
Moped_Ryder said:
One does not update via Odin (well 99% of the time IMO) Odin is usually used to revert to stock and reset partitions.
It may be late for you now...but a warning to others - Messing with Odin is one of the quickest ways to brick your phone. I dont think Ive ever actually heard of anyone hard brick a T959 without Odin.
Click to expand...
Click to collapse
I agree with ya Moped_Ryder about the quirks of using Odin, although Ive never had a problem with it, as long as I do or don't tick the wrong buttons or try flashing the wrong SW for the wrong application ETC ETC!!
Ironically, a half a day too late, I found out about the dangers and horrors of using the Samsung Kies update, and that was what BRICKED my phone, Its corrupted the primary and 2ndary Boot-loaders, BUT again it wasn't ODIN that did it!! Personally I use CWM to flash anything above stock JFD.
BTW I JUST INSTALLED YOUR ROM GREAT WORK, IVE NEVER SEEN FROYO ACT AND PERFORM SO WELL! WHY WOULD I REVERT BACK TO FROYO, BECAUSE IVE HAD TOO MANY WEIRD PROBLEMS WITH ALL THE ICS's and Froyo cured all the app problems I needed working and plus Ive got the loud ringtone again ETC ETC!! Only thing I miss. Is not being able to use my FFC I modded the phone with. I'm wondering if there is a way to port that part of the needed SW into your Froyo to support FFC's Sometimes Old is better, but to each their own!! Anyway great job, Thanks a ton!!
Unfortunately you have a hard brick. I know, I did the same thing. Fortunately it doesn't mean your phone is toast. Go to mobiletechvideos.com, you need a JTAG service. I also recommend the Unbrickable Mod. They can do that service for you. You can find out more about unbrickable mod, search in xda. Good luck!
Sent from my SGH-T959 using xda premium
Don't necessarily give up.
My phone was doing the same thing after I screwed up a flash. The screen would not light up and there was no indication of the phone powering up at all no matter what I did. Tried all sorts of tricks (researched from XDA) to get into download mode or otherwise get it to at least partially boot, aboslutely nothing worked. Out of desperation, I found a guy within driving distance of me that sold jigs, got one within a couple of hours. Popped the jig into my phone, went right into download mode, flashed stock no problem. Phone has worked fine ever since.
Don't give up. Hopefully the jig will work.
I had a similar issue with my phone after using Odin,it was completely hard bricked. As I am in Europe no possibility for Jtag but I found the Unbrickable Mod by Adam Outler. Using it you really need very good soldering skills. If you're not good with that try to find someone to do it on any electronic repairs or something, that's the way that I did,it will cost you few bucks.
Sent from my SGH-T959 using XDA
You cannot brick this phone. I thought I bricked mine a couple times and panicked like hell only to have fixed the problem. Odin is reverting back to 2.1 or 2.2 if you mess up. If you are having trouble with Odin, try Heimdall. As far as turning your phone on, take out the battery, put it back in, plug in usb with odin or heimdall running, volume up and down while pressing power button. Hold this until download mode shows up. odin back to stock. After this, try re-flashing the new firmware you tried, but read the developers instructions again before doing so. I hope this helped
Even if you brick the phone hopelessly with a bad bootloader flash, it's not really lost. If you Google something like "Vibrant jtag repair" you'll find that you can get you phone fixed.
can you help me for sgh-t959v
skayalgomas said:
Hi to everyone! Is my first thread here. I have a Samsung Vibrant SGH-T959 and try to update using Odin3 v1.85. Everything go well but at end apear Fail in Odin and the phone turn off. I think the phone go to restart but never turn on again and I can't turn on now. I press power botton and no response. I try to put it in download mode or recovery mode and I can't. What is next? I order a JIG, but a friend told me that no correct my problem.
Click to expand...
Click to collapse
i downloaded the .tar file 2.2.3 for sgh-t959v for flashing my phone
but odine failed the process and now my device is even not getting turned on.
my name is sourabh mattu
mail id is [email protected]
phn. +919217574416
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
dr_rp1234 said:
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
Click to expand...
Click to collapse
OK first, the stock images are 2.1 eclair not 2.2 froyo. Are you sure you have the right files? Are you sure your phone is a t959(3g, no front camera)and not t959v(4g, has front camera). Second, it sounds like a hard brick, if all else fails go to www.mobiletechvideos.com and check out the unbrickable mod and JTAG repair.
If you get your phone in DL mode and you have the correct Odin images, check the repartition box as well as others and run it.
Good luck
sent from my magic box to yours
Remove battery and sim and microsd. Leave out and press and hold power for 30 seconds or so. Leave battery out for a few minutes.
Put battery in and if you are on GB bootloader hold volume up and plug in USB. Might get you to download mode.
I did that with a friends phone about a year ago and got lucky. Odin recognized it. I read that somewhere here on XDA. May be a shot in the dark... but when you get desperate any new ideas to try can be a relief right?
Good luck to you.
After I messed with bootloaders and then tried to get back to stock with Kies I had this problem.
iTz KeeFy said:
You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Click to expand...
Click to collapse
I called Samsung and told them that I was just trying to upgrade to 2.2 with their software and they replaced my PCB (printed circuit board) for no cost (including shipping). I have no idea if they tried to figure out if I had really used Kies (if they could even figure it out with the state my phone was in) or if they just replaced the PCB blindly. Worth a shot, I'd say!
Thanks for your concern.
Zeferden said:
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Click to expand...
Click to collapse
Thanks for your concern.
But it did not work for me.
thanks
iTz KeeFy said:
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Thanks for your concern
Its T mobile vibrant T959.
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
dr_rp1234 said:
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
Click to expand...
Click to collapse
Sorry to say this but your phone is hard bricked, as in nothing can save it but a JTAG or warranty service. You can try to call Samsung and say you hard bricked your phone cause of kies, it worked for another.
Sent from Mount Olympus via Hermes.
you can try this, it works for many user
http://forum.xda-developers.com/showthread.php?p=17858853#post17858853
HELP!
I need help with my Samsung galaxy SGH-T959 Vibrant I got bricked so I was fixing it with odin until my phone fell and it disconnected and red letters and numbers came out. when I try turning my phone on it doesn't until I press the buttons to go to download mode those red numbers come out and I can't do anything. Please Help
When you pulled the battery, after it hung up with Odin, you corrupted the primary Bootloader, because it wasn't completely written in......Last weak possible option is to try every rocker/battery/cable sequence ETC, to get Odin to handshake with the phone!!.....If there's still no sign of life after doing that....Your only option will be to have it JTAG,d in order to rewrite the primary bootloader file back in it.....it'll never power on unless the primary bootloader executes properly!!....you can corrupt the 2ndary BL and the phone will only be soft bricked, but a primary BL corruption is phone DEATH!!....Only place I know of that's reliable is: mobiletechvideos.com....send it to them, they'll rewrite the primary BL back in it and I think 2.1 or 2.2 for you and mail the phone back to you!!....Good luck let us know if you got it powered on with any combination, as that could save another Bricker from having to send it out!!
Randomness Guy........Start your own thread in the troubleshooting forum, AND QUIT TRYING TO HIJACK THIS THREAD!!