Related
Hello there, I'm new to these forums.
I tried rooting my phone the other day. I'm not sure what happened but it is now just stuck on the Sony Ericsson screen when trying to boot.
I have found solutions for 1.6 and 2.1 firmwares but as I am no longer using them.
I understand why it is stuck, just have no solution.
Please help.
P.S I understand I'm not the first this has happened but I haven't found anything that is using 2.3.1
Try to use SUES to UpDate or Repair your X10..it will fix it..
Try to do a Fresh Flash again using Flash TooL and TuT from here http://forum.xda-developers.com/showthread.php?t=1196808
Geoff Melon said:
Hello there, I'm new to these forums.
I tried rooting my phone the other day. I'm not sure what happened but it is now just stuck on the Sony Ericsson screen when trying to boot.
I have found solutions for 1.6 and 2.1 firmwares but as I am no longer using them.
I understand why it is stuck, just have no solution.
Please help.
P.S I understand I'm not the first this has happened but I haven't found anything that is using 2.3.1
Click to expand...
Click to collapse
Download flashtool and install 2.1 firmware again. Root and install x recovery and then, download any of 2.3 ROM (I use wolf 4.04) and just flash the ROM and your good to go...
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
xp3rto said:
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
Click to expand...
Click to collapse
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment CWM3_for_xReC.zip Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
nightwing369 said:
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment 867933 Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
Click to expand...
Click to collapse
Opps em extremely sorry
i tried going in the xrecovery many time ! but the phone dosent go ! well actually this isnt my phone , it it my friend's phone , i own a samsung galaxy note !
Any ways thanks for your help !
ill try what u said
thanks again
s0ftcorn said:
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
Click to expand...
Click to collapse
No i didnt try SEUS !
xp3rto said:
No i didnt try SEUS !
Click to expand...
Click to collapse
do it? you will loose your data but... your phone should work again.
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
OKay thanx
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
ill give this a try too ! thanx
xp3rto said:
ill give this a try too ! thanx
Click to expand...
Click to collapse
ok.. i fixed on my x10mini pro with stock rom flas via flash tool
but if you will again flash some custom rom.. don't touch kernel if you didn't unlock bootloader
you can try later flash some custom rom that doesn't need custom kernel
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
i cant find seus ! can you please give me a link from which i can download it ! thank you
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
xp3rto said:
i cant find seus ! can you please give me a link from which i can download it ! thank you
Click to expand...
Click to collapse
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
but I never use that.. only flash tool
matthias1203 said:
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
Click to expand...
Click to collapse
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
basically you need to read the instructions how to install the rom
xp3rto said:
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
Click to expand...
Click to collapse
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
matthias1203 said:
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
Click to expand...
Click to collapse
x10 mini pro
s0ftcorn said:
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
Click to expand...
Click to collapse
can u give me instructions how to use the sues
Done
Thanks all of u !! i am very great full to u my phone works now
Hey guys,
I rooted (by super click, confirmed by root checker) and installed (busy box) and move (three files of excovery,busy box and chargemon to system/bin cmod 7777) all what is necessary by
ijustutter.com
But, I cannot entry to xrecovery to flash new ROM, I was trying to push back button several times by appearing Sony Ericcson letters, but impossibel to entry,
Please help, it is my wife's phone, I should do it.
Model: SE X10 mini pro, 2.1 update 1, kernel 2.6.29, 2.1.1.A.0.6,
thank you.
vasek2 said:
Hey guys,
I rooted (by super click, confirmed by root checker) and installed (busy box) and move (three files of excovery,busy box and chargemon to system/bin cmod 7777) all what is necessary by
ijustutter.com
But, I cannot entry to xrecovery to flash new ROM, I was trying to push back button several times by appearing Sony Ericcson letters, but impossibel to entry,
Please help, it is my wife's phone, I should do it.
Model: SE X10 mini pro, 2.1 update 1, kernel 2.6.29, 2.1.1.A.0.6,
thank you.
Click to expand...
Click to collapse
Try to use "Flashtool": http://forum.xda-developers.com/showthread.php?t=928343
I had problems when tried using the new version (0.9.9.0) of Flashtool with my X10 mini (E10) .
I tried the older V0.8.6.0 and it went smoothly!
I also did complete factory reinstall with SEUS. Not sure it was necessary but if you do- make a full backup before!
problems with flashing SE x10 mini pro
orlev1 said:
Try to use "Flashtool": http://forum.xda-developers.com/showthread.php?t=928343
I had problems when tried using the new version (0.9.9.0) of Flashtool with my X10 mini (E10) .
I tried the older V0.8.6.0 and it went smoothly!
I also did complete factory reinstall with SEUS. Not sure it was necessary but if you do- make a full backup before!
Click to expand...
Click to collapse
Hey,
Just commenting:
I tried to flash it according to the thread you posted. But It does not works with flashtool 0.9.9.0. Even I installed appropriete drivers, but without sucess.
I did not find older version of flash tool and did not do complete factory reinstall.
So maybe it is time to find it and do reinstall...
vasek2 said:
Hey,
Just commenting:
I tried to flash it according to the thread you posted. But It does not works with flashtool 0.9.9.0. Even I installed appropriete drivers, but without sucess.
I did not find older version of flash tool and did not do complete factory reinstall.
So maybe it is time to find it and do reinstall...
Click to expand...
Click to collapse
Well, you didn't have to flash anything, just press the +-button to install xrecovery to your phone and follow the instructions
vasek2 said:
Hey guys,
I rooted (by super click, confirmed by root checker) and installed (busy box) and move (three files of excovery,busy box and chargemon to system/bin cmod 7777) all what is necessary by
ijustutter.com
But, I cannot entry to xrecovery to flash new ROM, I was trying to push back button several times by appearing Sony Ericcson letters, but impossibel to entry,
Please help, it is my wife's phone, I should do it.
Model: SE X10 mini pro, 2.1 update 1, kernel 2.6.29, 2.1.1.A.0.6,
thank you.
Click to expand...
Click to collapse
trust me, i've been where you are and I know what you mean. what you could do is download the x8toolbox.final (link given below)
http://forum.xda-developers.com/showthread.php?t=1117100
it's really useful for starters. It's very easy to follow commands in it as well. you can root, install recovery, add dual touch and more with easy to follow instructions. x8toolbox is the best!!! all the best and hope it works out for you.
HIT THANKS IF I HELPED!!
http://forum.xda-developers.com/showthread.php?t=1117100
vasek2 said:
Hey,
Just commenting:
I tried to flash it according to the thread you posted. But It does not works with flashtool 0.9.9.0. Even I installed appropriete drivers, but without sucess.
I did not find older version of flash tool and did not do complete factory reinstall.
So maybe it is time to find it and do reinstall...
Click to expand...
Click to collapse
I would recommend to try the older version of Flashtool (0.8.6)- you can find at the "Previous release" tab at the download site (http://androxyde.github.com). Don't forget to install the drivers from the \Flashtool\drivers folder.
frozen
666shanx said:
trust me, i've been where you are and I know what you mean. what you could do is download the x8toolbox.final (link given below)
http://forum.xda-developers.com/showthread.php?t=1117100
it's really useful for starters. It's very easy to follow commands in it as well. you can root, install recovery, add dual touch and more with easy to follow instructions. x8toolbox is the best!!! all the best and hope it works out for you.
HIT THANKS IF I HELPED!!
http://forum.xda-developers.com/showthread.php?t=1117100
Click to expand...
Click to collapse
Finally | could install recovery throug X8Toolbox beta 4. I loaded CWM recovery, I wiped/reseted and flashed ROM MiniCM9-3.0.5 mimmi.Installation ok.
But, when I rebooted I only can see logo Sony Ericsson and the phone does nothing. I can only remove battery but again happens the same. I cannot entry recovery either. Maybe I push wrong buttons...
Please help, in other case I am witout hot dinner from my wife!
Thank you!
vasek2 said:
Finally | could install recovery throug X8Toolbox beta 4. I loaded CWM recovery, I wiped/reseted and flashed ROM MiniCM9-3.0.5 mimmi.Installation ok.
But, when I rebooted I only can see logo Sony Ericsson and the phone does nothing. I can only remove battery but again happens the same. I cannot entry recovery either. Maybe I push wrong buttons...
Please help, in other case I am witout hot dinner from my wife!
Thank you!
Click to expand...
Click to collapse
i guess you are new to this phone. you have a soft brick. install Sony PC companion and go to 'support' and repair your phone manually by following the instructions there. nothing to worry.
next,you cannot install minicm9 without unlocking bootloader and without unlocking boot loader, you can't flash custom kernel required for minicm. unlocking bootloader is a bit risky. remove your battery and look for the digits in the form of 11w29. if your phone has anything equal to or above 11w29 (like 11w30 or 11w44), you CANNOT unlock bootloader. you have to flash roms compatible with your custom kernel. so better stick with the stock kernel if you don't want to risk it. i suggest you could try kuyadroid or gingerxperia or froyobread or honeyfroyo
link of some custom roms here:
http://forum.xda-developers.com/showthread.php?t=1879708
and
http://forum.xda-developers.com/showthread.php?t=1425240
hope i have helped you.
HIT THANKS IF I HELPED!!
ROM flash
[Thank you 666shanx! Yes, it helped. Yes, I am new. It is my wife's phone which is fed up with the system (slow, small RAM menory), but she loves this hardware (red, small, hw keyboard). So I wanted to install other version of system to improve it.
I have 11w6. it means I can unlock bootloader. But, if could help me to flash the stock roms to improve the system, maybe I would do it like that.
Am I right?
Thank you!
Yes you could unlock bootloader. But you don't necessarily need to. Try flashing 'kuyadroid'. It installs on stock and DOESN'T NEED UNLOCK!
There are a lot of threads which teach you how to unlock. Search a bit for them. You need flashtool for it, which I guess you already have. Here's one
http://forum.xda-developers.com/showthread.php?t=1821750
But before all that just try kuyadroid. I bet you'll love it
HIT THANKS IF I HELPED!!!
Sent from my W8-miniCM7 using xda app-developers app
kuyadroid
666shanx said:
Yes you could unlock bootloader. But you don't necessarily need to. Try flashing 'kuyadroid'. It installs on stock and DOESN'T NEED UNLOCK!
There are a lot of threads which teach you how to unlock. Search a bit for them. You need flashtool for it, which I guess you already have. Here's one
http://forum.xda-developers.com/showthread.php?t=1821750
But before all that just try kuyadroid. I bet you'll love it
HIT THANKS IF I HELPED!!!
Sent from my W8-miniCM7 using xda app-developers app
Click to expand...
Click to collapse
Ok!
But, what I shall do exactly? To install some recovery and install ROM kuyadriod for SE x10 mini pro ? That's it?
I tried to find corresponding threads but I am a little bit confused about howto.
Thank you!
Yes thats it! Download kuyadroid ROM. Copy to sd card. Install using recovery. You're done!
Sent from my W8-MiniCM7 using xda app-developers app
Cannot find ROM for x10
Well, I tried to find this ROM but all ROMs are for SE X8. Can I use it? Or, do you know where I find it? thnks
all x8 roms work on x10, w8, x10 mini etc. just try it
666shanx said:
all x8 roms work on x10, w8, x10 mini etc. just try it
Click to expand...
Click to collapse
?
what do you mean?
there is no miniCM roms for x10 (x10i); only for x10mini (e10/robyn), x10minipro (u20/mimmi) and x8/w8 (e15/shakira)
and each rom version is device specific and wont work on other devices.
I've already explained to him that minicm roms do not work. I've given him a link of roms which work on all the phones I mentioned...
Sent from my E15i using xda app-developers app
Hi,
I am new to flashing and installing things. i've sony ericsson xperia mini e10i (baseband - M76XX-TSNCJOLYM-53404006, kernel - 2.6.29, build - 2.0.A.0.504, firmware - 2.1-update1). i tried rooting by installing framaroot and universal androot and finally z4root and using z4root i could be able to get root access. after i installed com.koushikdutta.rommanagr_v4.3.3.3.0.apk, but this rom manager didn't show my cell phone model. What sould i do next in installing good and stable rom? please help and suggest me. thanks in advance..:crying:
rameshbvn said:
Hi,
I am new to flashing and installing things. i've sony ericsson xperia mini e10i (baseband - M76XX-TSNCJOLYM-53404006, kernel - 2.6.29, build - 2.0.A.0.504, firmware - 2.1-update1). i tried rooting by installing framaroot and universal androot and finally z4root and using z4root i could be able to get root access. after i installed com.koushikdutta.rommanagr_v4.3.3.3.0.apk, but this rom manager didn't show my cell phone model. What sould i do next in installing good and stable rom? please help and suggest me. thanks in advance..:crying:
Click to expand...
Click to collapse
Sorry
Wrong Forum
Go To Yours
rameshbvn said:
Hi,
I am new to flashing and installing things. i've sony ericsson xperia mini e10i (baseband - M76XX-TSNCJOLYM-53404006, kernel - 2.6.29, build - 2.0.A.0.504, firmware - 2.1-update1). i tried rooting by installing framaroot and universal androot and finally z4root and using z4root i could be able to get root access. after i installed com.koushikdutta.rommanagr_v4.3.3.3.0.apk, but this rom manager didn't show my cell phone model. What sould i do next in installing good and stable rom? please help and suggest me. thanks in advance..:crying:
Click to expand...
Click to collapse
do you mean installing a new rom?
there are many threads about doing so..
search for those threads..i suggest you to use flashtool in your pc to flash roms and kernels..
I think your device was X10 Mini, you were in wrong forum bro
luckymouse17 said:
I think your device was X10 Mini, you were in wrong forum bro
Click to expand...
Click to collapse
i'am sorry 4 being at wrong forum. am new to this site., will b @ correct forum...
the hellboy said:
do you mean installing a new rom?
there are many threads about doing so..
search for those threads..i suggest you to use flashtool in your pc to flash roms and kernels..
Click to expand...
Click to collapse
hi hellboy,
thanks, sorry for late reply. I downloaded flash tool.
hi! I have x10 mini e10i and want to install custom rom even if its just running on 2.2 or 2.3.
My phone is 2.1-update 1, rooted, cwm installed but locked bootloader.
I can see some post that you can install custom rom on locked bootloader and stock kernel
Can someone make a "NEW" tutorial on how to install custom rom on locked bootloader on x10 mini e10i (not pro).
Thanks.
jhun12 said:
hi! I have x10 mini e10i and want to install rom. My phone is 2.1-update 1, rooted, cwm installed but locked bootloader.
I can see some post that you can install custom rom on locked bootloader and stock kernel
Can someone make a "NEW" tutorial on how to install custom rom on locked bootloader on x10 mini e10i (not pro).
Thanks.
Click to expand...
Click to collapse
Please use SE tweaker tool to root and install CWM Recovery. SE Tweaker tool (also works on X10 mini): http://forum.xda-developers.com/showthread.php?t=1462278
Then restart your phone and press the back button repeatedly to boot into CWM Recovery. Wipe data/factory reset then flash the ROM that you want.
reply
rootdefyxt320 said:
Please use SE tweaker tool to root and install CWM Recovery. SE Tweaker tool (also works on X10 mini): http://forum.xda-developers.com/showthread.php?t=1462278
Then restart your phone and press the back button repeatedly to boot into CWM Recovery. Wipe data/factory reset then flash the ROM that you want.
Click to expand...
Click to collapse
but im already rooted and have cwm recovery installed. Is that is another way of installing custom rom on locked bootloader?
jhun12 said:
but im already rooted and have cwm recovery installed. Is that is another way of installing custom rom on locked bootloader?
Click to expand...
Click to collapse
You have to use a ROM that supports the stock kernel. So all you do is download a ROM zip and flash CWM Recovery. An example is http://forum.xda-developers.com/showthread.php?t=1201116 It should work on X10 Mini BTW.
reply
I finally installed cm6 on my phone. But i still have problem. It always restarting after the sony ericsson text (not the logo) but sometimes it can open 'til the homescreen but still it will shut down automatically.
I tried pc companion but when i try to connect my phone, its just restarting all over. I thought if I would install a custom rom, it will repair the phone.
What's the difference between flashing the phone via pc companion and installing custom rom via cwm recovery?
jhun12 said:
I finally installed cm6 on my phone. But i still have problem. It always restarting after the sony ericsson text (not the logo) but sometimes it can open 'til the homescreen but still it will shut down automatically.
I tried pc companion but when i try to connect my phone, its just restarting all over. I thought if I would install a custom rom, it will repair the phone.
What's the difference between flashing the phone via pc companion and installing custom rom via cwm recovery?
Click to expand...
Click to collapse
PC companion flashes stock ROM while CWM is used for flashing custom ROMs. I suggest you to use flashtool to flash a stock ROM
reply
i thought if i will replace the old system, it will be fixed.
jhun12 said:
i thought if i will replace the old system, it will be fixed.
Click to expand...
Click to collapse
Flashing the 2.1 FTF with flashtool will reset your whole phone and it should fix your problem. If it doesn't, it means that you have a hardware problem.
can you give me a link of 2.1.1.A.0.6 tft for e10i?
jhun12 said:
can you give me a link of 2.1.1.A.0.6 tft for e10i?
Click to expand...
Click to collapse
Sorry I can't find one. All of them have seem to be deleted
EDIT: Found one: http://www.4shared.com/file/MBqMiM6W/E10i_android_21_updae_1_sridro.html
Just make a random account and you don't need to validate your email address at all.
thanks
me too, i can't find one. thanks for the link.
How about flashtool for x10 mini?
Hope it will fix.
jhun12 said:
me too, i can't find one. thanks for the link.
How about flashtool for x10 mini?
Hope it will fix.
Click to expand...
Click to collapse
Flashtool: https://unrestrict.li/flashtool
reps
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
jhun12 said:
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
Click to expand...
Click to collapse
I can't find one anymore. Just use the one I gave you on 4shared.
jhun12 said:
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
Click to expand...
Click to collapse
Here
reps
SmG67 said:
Here
Click to expand...
Click to collapse
uhm, do you have a link of stock 2.1.1.A.0.6.zip rom which i can use on cwm recovery. or can i use 2.1.1.C.0.0 rom on 2.1.1.A.0.6. I just want to try if it will be fix my phone.
rootdefyxt320 said:
I can't find one anymore. Just use the one I gave you on 4shared.
Click to expand...
Click to collapse
i tried to search there but no luck.
jhun12 said:
uhm, do you have a link of stock 2.1.1.A.0.6.zip rom which i can use on cwm recovery. or can i use 2.1.1.C.0.0 rom on 2.1.1.A.0.6. I just want to try if it will be fix my phone.
Click to expand...
Click to collapse
You can use the 2.1.1.C.0.0 ROM. It was an update for the x10 mini pro in certain areas, but it will run on the x10 mini too, since there is no hardware specific stuff in the ROM itself. You will probably lose root and cwm though when you flash it.
I've got an 'undressed' 2.1.1.A.0.6 I made for myself in zip-format which includes root and cwm, but i took out all the google stuff, so there's no market in it.
If you want to know if your phone is ok, just wipe everything and install the 2.1.1.C.0.0.
SmG67 said:
You can use the 2.1.1.C.0.0 ROM. It was an update for the x10 mini pro in certain areas, but it will run on the x10 mini too, since there is no hardware specific stuff in the ROM itself. You will probably lose root and cwm though when you flash it.
I've got an 'undressed' 2.1.1.A.0.6 I made for myself in zip-format which includes root and cwm, but i took out all the google stuff, so there's no market in it.
If you want to know if your phone is ok, just wipe everything and install the 2.1.1.C.0.0.
Click to expand...
Click to collapse
can you upload it?
2.1.1.A.0.6
Can't find the 2.1.1.C.0.0 anymore