2.1 is out and you can get it yourself within a matter of minutes, root ya phone with the one click universal android root app then use root explorer to change the default.prop in system to register your device as nordic and voila reboot device connect via seus , 2.1 DOWNLOADING! AWESOME HUH?
heres some links for ya to follow method i just said
one click root
Provided below as an attachment, simply download onto your x10 and install, then simply click root button,
nordic change
1. DownLoad the file attached Default.prop
2. extracted it an save it anywhere on your SD-Card (so you can find it later)
3. Open Root Explorer open folder sdcard where you save the downloaded default.prop (PLZ MAKE BACKUP FROM THE ORIG. default.prop !!!!!!)
4. Click long on default.prop at the menue click copy
5. go back and open system folder
6. on the right upper corner click r/w
7. click paste
8. restart the x10
9. Run SEUS and start to download nordic 2.1
Did you miss this thread - NEW 2.1 Update for ROOTED X10 -easy way-, or these...
Debrand to Nordic Combined (B) Quick and update to 2.1
X10Flash 2.1 final & 2.1 Firmware
x10 Flash 2.1 Final + Global World Firmware 2.1
DID you miss the fact that neither of these provide an easy all in one solution which included the one click root too?
No so move on cowboy
androidfanboi said:
DID you miss the fact that neither of these provide an easy all in one solution which included the one click root too?
Click to expand...
Click to collapse
Did you miss the fact that the first two links describe the exact same method, or that the other the other two don't require rooting at all. Adding a link to your post doesn't warrant you having to start yet another thread on the exact same topic, with almost similar wording as an existing thread on the same page you've posted yours.
So read the rules boy!
XperiaX10iUser said:
Did you miss the fact that the first two links describe the exact same method, or that the other the other two don't require rooting at all. Adding a link to your post doesn't warrant you having to start yet another thread on the exact same topic, with almost similar wording as an existing thread on the same page you've posted yours.
So read the rules boy!
Click to expand...
Click to collapse
Why dont you try having your own medicine and read BOY! the other two do require ROOT but dont state how to get it so iv bunged it all in one, why dont you go find yourself a life to spend your time on rather than replying to me you retard, there will be beginners that will find this useful as its all in one post
androidfanboi said:
the other two do require ROOT
Click to expand...
Click to collapse
Nope, all they require is the ability to put your phone in to "flashmode". I suggest you do some reading!
androidfanboi said:
but dont state how to get it
Click to expand...
Click to collapse
All that is missing from - NEW 2.1 Update for ROOTED X10 -easy way- - is an attachment which didn't require a new thread with the same information to add it.
androidfanboi said:
why dont you go find yourself a life to spend your time on rather than replying to me you retard
Click to expand...
Click to collapse
lol, showing your level of maturity with that one.
Do all of these methods work on the mini pro? Thanks.
3dawg said:
Do all of these methods work on the mini pro? Thanks.
Click to expand...
Click to collapse
See the "mini" forum, I think you'll find the appropriate files there.
XperiaX10iUser said:
Did you miss this thread - NEW 2.1 Update for ROOTED X10 -easy way-, or these...
Debrand to Nordic Combined (B) Quick and update to 2.1
X10Flash 2.1 final & 2.1 Firmware
x10 Flash 2.1 Final + Global World Firmware 2.1
Click to expand...
Click to collapse
So, which link will be good?
Is it possible to just add the "Nordic" part at the top to my current default.prop file. Or does it need everything in the file?
EG, Just change the bold sections:
ro.semc.version.cust=1234-8465
ro.semc.version.cust_revision=R9A
ro.product.name=X10_1234-8465
ro.semc.country=Nordic
ro.semc.product.brand=Generic
ro.product.brand=SEMC
ro.product.device=SonyEricssonX10i
ro.product.manufacturer=Sony Ericsson
ro.semc.content.number=PB10
ro.product.model=X10i
ro.semc.ms_type_id=AAD-3880056-BV
ro.email.domain.0=hotmail.co.uk
ro.email.domain.1=o2.co.ukro.email.account-name.0=Hotmail
ro.email.account-name.1=O2 E-mail
ro.email.incoming-protocol.0=pop3
ro.email.incoming-protocol.1=pop3
ro.email.incoming-server.0=pop3.live.com
ro.email.incoming-server.1=mail.o2.co.uk
ro.email.incoming-port.0=995
ro.email.incoming-port.1=110
ro.email.incoming-encrypt.0=ssl+
ro.email.outgoing-server.0=smtp.live.com
ro.email.outgoing-server.1=smtp.o2.co.uk
ro.email.outgoing-port.0=25
ro.email.outgoing-port.1=25
ro.email.outgoing-encrypt.0=tls+
ro.mms.auto-download=true
ro.mms.roaming-download=false
ro.semc.message_max_size=307200
ro.product.locale.language=en
ro.product.locale.region=GB
ro.mmi.standby-ringtone-volume=6
ro.ciphering-indication=false
ro.semc.ecclist.type.0=Police
ro.semc.ecclist.number.0=999
ro.semc.ecclist.plmn.0=FFF FFF
ro.semc.ecclist.non_ecc.0=false
ro.config.ringtone=sony_ericsson.ogg
ro.config.notification_sound=notification.ogg
ro.homepage.url=http://wap.sonyericsson.com/download/download.do?cmd=owp&appl=sehome
ro.browser.bookmark.title.0=Sony Ericsson
ro.browser.bookmark.title.1=Sony Ericsson Support
ro.browser.bookmark.url.0=http://wap.sonyericsson.com/download/download.do?cmd=owp&appl=sehome
ro.browser.bookmark.url.1=http://wap.sonyericsson.com/download/download.do?cmd=owp&appl=contactus
ro.home-screen=com.android.launcher
ro.facebook.enable=true
ro.twitter.enable=true
ro.picasa.enable=true
ro.flickr.enable=false
ro.youtube.enable=true
ro.semc.hidden_pull_interval=168
ro.semc.enable.fast_dormancy=true
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.yt=android-sonyericsson
ro.com.google.clientidbase.am=android-sonyericsson
ro.com.google.clientidbase.vs=android-sonyericsson
ro.com.google.clientidbase.gmm=android-sonyericsson
ro.semc.emanual.url_semc=http://www.sonyericsson.com/cws/support/
ro.email.num=2
ro.semc.ecclist.num=1
ro.browser.bookmark.num=2
ro.drm.whitelist.num=0
ro.build.fingerprint=SEMC/X10_1234-8465/SonyEricssonX10i/es209ra:1.6/R2BA026/1277951075:user/rel-keys
Never mind, I was hoping it would grab the update over wifi.
TrietHocNhanSinh said:
So, which link will be good?
Click to expand...
Click to collapse
They are all good, but you'll find it easier using one of the last two.
Related
Hey, root via Universal Androot works on Dell Streak (FW 1.6 Build 6267).
Sorry, cant post Links as a new User - you can find it in
Nexus One > Nexus One Themes and Apps >[APP] [ROOT] 1-click root for N1
Passe28 said:
Hey, root via Universal Androot works on Dell Streak (FW 1.6 Build 6267).
Click to expand...
Click to collapse
Really great! Worked on my german streak with same build! Thanks a lot!
...just waiting for a 2.1 or 2.2 android now
Hi I cant find Universal Androot in the Android market 0_o
I’m a UK 4399 user, do you know if anyone else in the UK can access?
Thanks.
http://blog.23corner.com/2010/08/07/universal-androot-1-5-released/
fards said:
http://blog.23corner.com/2010/08/07/universal-androot-1-5-released/
Click to expand...
Click to collapse
'server not found'.....
Sorry, cant post Links as a new User - you can find it in
Nexus One > Nexus One Themes and Apps >[APP] [ROOT] 1-click root for N1
(also added this text to the main post)
Thanks fards,
If anyone was going to reply it was going to be you.
I just get a DNS error when using this I also found a link and QR code on Software2Tech.com with the same issue.
Passe28 – did you download from the market? Or do you have a copy od the .apk?
Thanks.
looks like me posting that link took the server down !
eek maybe I should work for slashdot
Passe28 said:
Sorry, cant post Links as a new User - you can find it in
Nexus One > Nexus One Themes and Apps >[APP] [ROOT] 1-click root for N1
(also added this text to the main post)
Click to expand...
Click to collapse
Thanks, will take a look.
Passe28 said:
Sorry, cant post Links as a new User - you can find it in
Nexus One > Nexus One Themes and Apps >[APP] [ROOT] 1-click root for N1
(also added this text to the main post)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=747598
Worked 2nd time with Build 4399
Just wanted to know if this app installs busybox.
Sent from my Nexus One using XDA App
I will sticky this for other users thanks for the link Fards
doesnt work with 6267 french release.
EDIT : it's okay, need to re-execute twice. thanks jeams
it works on french devices: you have to run the root process twice.
tu reclick sur le bouton "root" et tu recommences si le soft te dit failed
i have streak rooted 6267.my led on the right flash.if i use thiis rott again what appen?my led flash again?
edit:nothing.i do.but my led flash again.
who help me?
hi there everyone, does this rooting method works with Dell Streak from the US? thanks all ^^"
alfri said:
i have streak rooted 6267.my led on the right flash.if i use thiis rott again what appen?my led flash again?
edit:nothing.i do.but my led flash again.
who help me?
Click to expand...
Click to collapse
did you try installing pauls superboot ? I can't see how this one click method would cause the flashing led issue..
try installing the 6267 boot.img from modaco in the thread you posted there..
a very quick search would tell you how to do it...
easiest way
grab pauls superboot r2 for 4339
copy the boot.img to that folder
delete the superboot.boot.img ( or whatever its called) rename boot.img to exactly the same name as the file you deleted.
go into fastboot on the streak (power on with the camera button down)
make sure it connected.
run the bat or shell file..
fards said:
did you try installing pauls superboot ? I can't see how this one click method would cause the flashing led issue..
try installing the 6267 boot.img from modaco in the thread you posted there..
a very quick search would tell you how to do it...
easiest way
grab pauls superboot r2 for 4339
copy the boot.img to that folder
delete the superboot.boot.img ( or whatever its called) rename boot.img to exactly the same name as the file you deleted.
go into fastboot on the streak (power on with the camera button down)
make sure it connected.
run the bat or shell file..
Click to expand...
Click to collapse
thanks.i do.adn ok.the led dont flash.thanks very much.
but only on mac,with window dont appeare bootloader on the streak.
Does anyone tried in a desire?
Cheers!!!
The following is just a product of assumption and it is NOT tested. It may brick your phone
Since the last update of SEUS, Sony Ericsson made it almost impossible to unbrand the X10 mini (with the blob_fs file changing method).
However SaintyUK has given us a nice guide about debranding the X10 mini pro here
So let's assume it is working for the X10 mini. The only different thing we need is a new "build.prop" file (UK Generic from a X10 mini)!
See SaintyUK's post for instructions, if anyone is willing to try it.
*EDIT* I have uploaded a different build.prop with changed values in the version of the FW. This might work.
*EDIT2* From the latest results of the members that have tried SaintyUK's method with the attached build.prop files, it seems that it is actually working.
PS:All credits to SaintyUK for his great guide.
DISCLAIMER:MEMBERS HAVE CONFIRMED THAT THIS METHOD IS ACTUALLY WORKING BUT I HAVEN'T AND THEREFORE I AM NOT RESPONSIBLE, IN ANY WAY, FOR BRICKED PHONES.
This method worked for me. But if your current FW version is not 1.2.A.1.174, dont't use the attached file directly!
ra3al said:
This method worked for me. But if your current FW version is not 1.2.A.1.174, dont't use the attached file directly!
Click to expand...
Click to collapse
A little more info, could be quite usefull!
You said "don't use the attached file directly. You mean that in a mini with FW version 1.1.A.0.8 this build.prop (1.2.A.1.174) is not going to work?
But in a branded 1.2.A.1.174 it should work right?
Good on you DaRk_dOg
SaintyUK said:
Good on you DaRk_dOg
Click to expand...
Click to collapse
Thank you sir,
But we would be even better if we could finaly solve it!
If what ra3al said is true then we might need the build.prop from 1.1.A.0.8
But someone must confirm it first. I cannot confirm it myself because i've already debrand my mini the old fashion way (blob_fs) long time ago
At least it worked for ra3al, thats great as even it helps one person thats good
We maybe able to edit the the values in the file. Thats what I did for the X10 Mini Pro. I found the CDF number (post 2 of my thread) and inserted it into the file!
Dosn't work... The original build.prop gets restored after reboot. Used root explorer.. Also somewhere in the forum there is a target-World build.prop
Sent from my E10i using XDA App
Ok i've edited the build.prop with the value for E10i Generic UK (1237-0392). Also this build.prop is from a E10i 1.1.A.0.8
Hope this will work.
(First post updated)
It was a root explorer issye. Working with latest versuon. Place build.prop in system then repair through seus.
Sent from my E10i using XDA App
DAXGr said:
It was a root explorer issye. Working with latest versuon. Place build.prop in system then repair through seus.
Sent from my E10i using XDA App
Click to expand...
Click to collapse
The first build.prop? Or the one i added today?
Could you also tell me your FW version?
so, which build.prop should I use to debrand my x10 mini? Buildprop11A08BrandedE10i.zip or E10i_build.prop_UK_Generic.zip?
my current version is:
Phone Software Version:
1235-3408_1.1.A.0.8
GENERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
Thanks.
So placing this file in the folder and then updating will be unbranded?
Yes thats correct SEUS will hopefully debrand. Try the 'E10i_build.prop_UK_Generic.rar' file first if not try the other file (see first post)
Thanks it worked... Now i'm 1.2.A.1.174
It works using any build.prop with file system version World-1.8-....
Sent from my E10i using XDA App
e10a
Would it work with E10a version.
Also, if it's not much asking, could someone write a guide for the mini?
Thank you devs very much...you rock!
chagolucho said:
Would it work with E10a version.
Also, if it's not much asking, could someone write a guide for the mini?
Thank you devs very much...you rock!
Click to expand...
Click to collapse
You cannot use any of the build.prop attached, as they only work for E10i. On the other hand if you find a build.prop of an E10a Generic UK it could work.
*First post updated*
You mean't E10a right DaRk_dOg?
SaintyUK said:
You mean't E10a right DaRk_dOg?
Click to expand...
Click to collapse
Yeap! I'm terribly sorry, made the correction!
But it MUST be from UK???
I dont think we would be able to get a E10a build.prop from there...
And the following question would be...does somebody have a E10a generic build.prop????????
Is it possible to have a dual touch update.zip to flash directly through xrecovery for the stock rom... I am just unable to insmod or adb shell in anyway.... Thanks.
albanezi said:
Is it possible to have a dual touch update.zip to flash directly through xrecovery for the stock rom... I am just unable to insmod or adb shell in anyway.... Thanks.
Click to expand...
Click to collapse
This thread should go on Q&A, anyway, upload you hw_config.sh (with rootexplorer search /system/etc/hw_config.sh, hold pressed the file, and choose copy, then go to your sd and paste, and transfer it to pc, and upload it ofc )
yes, it is possible
I will try to do it
bitmovel said:
yes, it is possible
I will try to do it
Click to expand...
Click to collapse
and here it is in attachment
credits for the script goes to DooMLoRD xD
EDIT: new version here
bitmovel said:
and here it is in attachment
credits for the script goes to DooMLoRD xD
Click to expand...
Click to collapse
Wow, thk you so much!
please tell me if it works.
Yes it works! The only problem that it only works with multitouch visualiser 2, emulators and games... I can confirm that it does not work with the stock web browser, skyfire browser, stock gallery or google maps... Maybe you could fix this Bitmovel and post it on a new thread as a [TUT].
albanezi said:
Yes it works! The only problem that it only works with multitouch visualiser 2, emulators and games... I can confirm that it does not work with the stock web browser, skyfire browser, stock gallery or google maps... Maybe you could fix this Bitmovel and post it on a new thread as a [TUT].
Click to expand...
Click to collapse
copy this http://forum.xda-developers.com/attachment.php?attachmentid=587304&d=1304601821 to /system/etc/permissions
Thanks to teapea
ooops
D4rKn3sSyS is right (tks for the tip)
no need to install that file manually. I have just included it in the new xrecovery update file (in attachment)
just re-install it
It should now work in all appz
thank you guys, you are quite simply awsome! One very last question, will this work on the latest 2.1.1.C.0.0 build?
albanezi said:
thank you guys, you are quite simply awsome! One very last question, will this work on the latest 2.1.1.C.0.0 build?
Click to expand...
Click to collapse
I dont really know, but if 2.1.1.C.0.0 kernel and baseband are not the right one (2.6.29 and 015), won't work
D4rKn3sSyS said:
I dont really know, but if 2.1.1.C.0.0 kernel and baseband are not the right one (2.6.29 and 015), won't work
Click to expand...
Click to collapse
I haven't tested myself, but I assume it should work.
Same baseband and kernel were confirmed to be the same as 2.1.1.a.0.6 in some other thread
in fact, only a few files were changed.
I will compare both releases tomorrow. Maybe I can find why was that update made
I am suprised SE do bot publish changelogs with these kind of things... I'm guessing its something to do with stability or security.
I will try and put up a full and clear youtube video to show youtubers with X10 Mini Pro's around the world how its done next week as there are so many people on youtube looking for this, it will bring many more people to these forums and who knows they could become great contributers here.
bitmovel said:
ooops
D4rKn3sSyS is right (tks for the tip)
no need to install that file manually. I have just included it in the new xrecovery update file (in attachment)
just re-install it
It should now work in all appz
Click to expand...
Click to collapse
Awsum work mate.. was waiting for dual touch which could be flashed through xrecovery. Made my work easy.
It would be better if you could create a new thread on this.
Quick question: The new file you made was named "dualtouch_v006.zip" should this be renamed to "update.zip" or just run this file from xrecovery with its orginal name?
And will innstalling this throuhg xrecovery delete anything of the personal data on the phone?
Sorry aboute the bad English and aboute the silly questions.
You shouldn't rename it, just install it from xrec with original name.
keep the same name, and no. it will not delete any personal data.
Thanx "bitmovel".
Does this go for themes aswell?Do these not delete any personal data?
it does nothing else then adding multitouch.
it does not remove anything at all
Experimentation and study
new procedures for Rooting
Sony and Sony Tablet Terminal Phone with ICS
Procedure # 1 →
a - download the file (all)
b - rename the file to update.zip 01 or 02 before inserting them in the root SDcard →
c - go into recovery mode (power + volume) and select System Update from SD CARD
d - select the pack just copied and renamed
and - recovery time from temporary select the pack 03 (does not need to be renamed)
f - if everything is ok now when you restart you'll have root
Code:
NB: two packs were included, because in theory if one does not work the other
I recommend that you first use the 01 because that's what should be "eaten" without problems.
In theory only side effects of this procedure should be the lack of flash pack.
Code:
DOWNLOAD PACK CLAIMS OF CONSCIENCE EVER TAKEN A TEST OF EXPERIMENTAL PROCEDURE AND POTENTIALLY HARMFUL.
WHAT DO YOU DO ONLY AND SOLELY AT YOUR OWN RISK!
The folder in mediafire is empty.
Yer there's nout in the folder.
attached files.
it will not work.
signature is not correct - even not the proper type - it has to be signed for whole-file.
what is the source of the files? you have created them?
what version of cwm recov is included? is it correct for S?
or some 'other-device' one?
I was getting excited then
This procedure for all devices sony and samsung. Samsung also works on the tablet now goes head to head Sony Tablet if someone tells me where to go or not. Could go. It does not install the CWM but does only the Root
Has anyone tested this yet?
anybody successed?
condi said:
it will not work.
signature is not correct - even not the proper type - it has to be signed for whole-file.
what is the source of the files? you have created them?
what version of cwm recov is included? is it correct for S?
or some 'other-device' one?
Click to expand...
Click to collapse
Is there any risk to try it? I had kernel build9 #1
rfreeman said:
Is there any risk to try it? I had kernel build9 #1
Click to expand...
Click to collapse
no risk, i'm sorry but its useless.
its not getting through verification.
Is there any way that you could fake the verification in a zip file condi? surely there must be.
Why post useless threads, not even chcked personally???
This forum is going down...
If not Condi we would be in all nowhere...
Before you post sth, CHECK if it works. What if it was dangerous and bricks the device???
Have you considered this?
Next time: think about the possible consequences, not post something you don't even know how/if it works, please.
Mods, remove this trash, please.
sebarkh said:
Why post useless threads, not even chcked personally???
This forum is going down...
If not Condi we would be in all nowhere...
Before you post sth, CHECK if it works. What if it was dangerous and bricks the device???
Have you considered this?
Next time: think about the possible consequences, not post something you don't even know how/if it works, please.
Mods, remove this trash, please.
Click to expand...
Click to collapse
May be he doesn't have Sony S. I'm not defending but let's be more open for ideas.
Thanks
Sent from my Desire HD using XDA
SudaDreamS said:
May be he doesn't have Sony S.
Click to expand...
Click to collapse
The OP's signature says they own a Sony Tablet S rooted.
I'm not defending but let's be more open for ideas.
Click to expand...
Click to collapse
Always.
Yes, the idea is what counts.
Since when has it been the standard to post un-checked un-verified and non working files here?
Dangerous is what it is. Lucky this is a sony with barely any user base, if this was posted on the galaxy forums there would be hundreds of possibly messed up phones out there...
I have a sony Tablet S but I can not test this procedure because they are not home. I'm off to work and I will have to stay for a few months so if anyone of good will could test this method and send the results would be happy. @ Condi if the compilation and wrong could you fill it in right way so as to have the root?
@ Condi.Is the guy maybe on the right track ?.If he is maybe you could help him ?
i have a sony tablet s with stock ics rom
tomorrow i'll come back home and try it let's hope it works
Hi there, have someone here tried to activate the on screen buttons for xperia s using the following document:
[MOD] Enable Xperia S on-screen buttons (Stock ICS 6.1.A.0.452) on the development section? cause i tried, however it did not work, i am running last version of Android 4.0.4 with unlocked bootloader and root as well, I followed step number 3 just to replace the original file as it is explained on the post, right after the phone rebooted by itself and as a result i get a bootloop. I would apreciate any help that you can provide to me
Saga3282 said:
Hi there, have someone here tried to activate the on screen buttons for xperia s using the following document:
[MOD] Enable Xperia S on-screen buttons (Stock ICS 6.1.A.0.452) on the development section? cause i tried, however it did not work, i am running last version of Android 4.0.4 with unlocked bootloader and root as well, I followed step number 3 just to replace the original file as it is explained on the post, right after the phone rebooted by itself and as a result i get a bootloop. I would apreciate any help that you can provide to me
Click to expand...
Click to collapse
Or you use the CWM file (last page, reuploaded. Or you paste the file on the /system partition, set permissions and then move it to /system/framework.
Framework-res.apk is propably one of the most important files from the entire Android system.
MMM ok, i think it would be easier to just install the ZIP file with CWM, however file is no longer available on your post, it seems it was removed from Mediafire server, so you think just by setting permisions i would be able to achieve the goal?
Saga3282 said:
MMM ok, i think it would be easier to just install the ZIP file with CWM, however file is no longer available on your post, it seems it was removed from Mediafire server, so you think just by setting permisions i would be able to achieve the goal?
Click to expand...
Click to collapse
Check the last page of the thread. The zip file was reuploaded.
Re checked. The file was removed again? Man, that's ****ty. I will upload it to my Box.net account for you. Give me 5 minutes.
OK: Here is it: https://www.box.com/s/4a8047c115fa3fb7612b
I found it but it did not work either, that's ok I'll figure it out myselft, thanks for your time and have a good day
Hey bro you are the best, thanks for your time, it worked out this time and it is so beautiful as well, any way i can buy you a beer?:highfive:
Saga3282 said:
Hey bro you are the best, thanks for your time, it worked out this time and it is so beautiful as well, any way i can buy you a beer?:highfive:
Click to expand...
Click to collapse
First, this mod isn't mine. I just re uploaded it. Second, I'm only 15. I can't drink a beer yet As much I would like to recieve, I can't take it for two reasons lol: No Paypal account for me and I can't take money for you But I appreciate that!
That's sad... on the other hand i do not drink alcohol either anytime you if you need something just let me know thanks very much and... Saludos desde Costa Rica hermano :highfive: