EDIT : I am now offering a $100 reward via PayPal to anyone that can offer me a solution to this problem. If you do not have a PayPal account, I will mail you a check for $100. Those are my only methods for payment. I am 100% serious about this by the way. From what I'm told, Nandroid backups are stored on the internal SD card, so even once the replacement phone arrives, I could not restore the nandroid backups on the (currently) broken phone over to the new one. I absolutely HAVE to get to those backups, and it is well worth $100 to me. NOTE : to be eligible for the reward, you MUST read the entire thread. I have already exhausted many common solutions to problems like this one, and am getting tired of getting offered the same advice over and over. If you fail to read the thread and offer me a solution that I have already attempted, I will not give you the $100 reward, even if you later are the one that comes up with the solution to my problem.
Please delete my other threads, I can't edit the title on them and they are outdated now.
This is my situation in a nutshell.
Downloaded Obsidian v2, wiped and flashed it. (this is my girlfriend's phone) - she did not like 2.2, so I wiped data/cache and attempted to restore the nandroid backup I had made. After hanging on 'restoring data' for 30 minutes I rebooted the phone, and now I'm here. The phone boots to the Vibrant logo only, I can get absolutely no other logos to show up no matter what I do. I realize now that I needed to flash a 2.1 kernel prior to restoring the Nandroid backup, but on my Droid, when I restore a nandroid backup that includes the kernel, so I did not know this step was necessary.
I have downloaded Odin but I have NEVER used it, so I am completely lost there as well. As far as I know, I simply need to download Odin, and then follow one of the many methods to access download mode. I have tried about 15 different methods of holding the buttons on the phone, plugging in the USB cable at the right time, etc. etc. etc. None of the methods work. The phone boots up to the Vibrant logo each and every time, no matter what. I downloaded and installed the Kies software so the drivers should be installed.
What do I do now? The phone is not hardware locked because I've used the buttons to access recovery many times. Is there a step I'm missing when it comes to Odin or do I just download it and open it? PLEASE give me instructions as if I am a child, because obviously whatever I'm doing is not working. PLEASE no vague instructions. I do not know how to use adb, odin, or basically how to do anything at all with this phone. I am a Droid user, and after I get her phone back to the way it was I will never attempt to hack it again. Thank you.
edit : also, yes I have pulled the SD card/SIM card.
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
use Odin 1.3 or maybe higher
velocity92c said:
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
Click to expand...
Click to collapse
I'm at work but do a search for odin 1.3 which worked for me. There is a thread that had all the files you need to get the phone back to stock kernel and all. If you haven't resolved the problem by tomorrow I'll try to find the thread for you or post the files if I can from my computer.
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Download Mode
velocity92c said:
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Click to expand...
Click to collapse
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Email me [email protected]
The best phone in the world
I have literally tried every possible combination of holding down buttons, powering up, usb cable in, out, etc. etc. I searched the forum and tried at least 30n different "surefire" methods. Odin always sits there and does nothing, and the phone just goes to the vibrant screen.
jaliscojorge said:
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Click to expand...
Click to collapse
I had to build an extremely ghetto Jig, which is just a 301kohm resistor going across pins 4 and 5 of a microusb plug. It sounds hard but its really not that bad, and unfortunately its the only way to get your phone into downloader mode if its hardware locked, like mine is.
As mentioned previously the phone is not hardware locked. I've accesssed recovery several times with the standard methods. Just got back from Tmobile and it will be a week before the new phone gets here. There has to be a way to fix this. Someone please help?
This is pretty weird because if the phone is not hardware locked, there's no reason that you can't get into download mode.
Just to be clear, so are you saying when you hold vol up + vol down ONLY, you will get vibrant screen?
Or when you hold volup + vol down THEN plug in the usb, it goes to Vibrant screen?
You need to be in download mode to use Odin, not recovery mode. Have you ever gotten into download mode via hardware? Was 'usb debugging' enabled? If so, go into download mode and follow Eugene's Froyo that doesn't brick.
I don't know how I can be anymore clear that the phone is not HWL and I cannot access download mode. I'm not trying to be an ass, it's just a very frustrating situation. I know you need to be in download mode to use Odin. I cannot get to download mode or this would be a cinch.
And to the poster before ^ this one, the phone goes to the Vibrant screen regardless of what button combination I press, or whether or not I hit any buttons at all. I've literally tried every combination possible, many many times.
I'm ready to throw this phone out the window. I have a hard time believing I am the only one to ever have this issue. It seems as though the answer to most problems is download mode + Odin but that does me no good.
Is there literally nothing else I can try?
From what I understand email thegreat520 he is supposed to be the guy to talk to I've heard it from a few posts
Still flashing
I know it can be frustrating, but excuse me for starting with the basics...
have you followed this youtube guide? I put it in the sticky because it was very helpful in my opinion.
http://www.youtube.com/watch?v=AnY7P14JSWQ
Here is another way I have not seen before:
http://www.youtube.com/watch?v=E9LYLoK1Qog
and why not post another
http://www.youtube.com/watch?v=rqxearzXrVY
I had the same issue search my post I used a froyo Rom when the phone 1st came out I download then something went wrong will flashing a new Rom I tried and tried odin did not work bc NO download mode I had got my phone the day it came out I just sent it back to tmobile pm ill explain how
Sent from my SGH-T959 using XDA App
Same issue
Used download mode many times, then did the same exact thing you did with the obsidian ROM. Now i cant get into download mode at all.
The method that worked 100% of the time previously (holding both volume buttons and then plugging the phone in while odin is runing) does not work. Tried a bunch of different methods and nothing.
There has to be a way to get around this.
OP, please try the method in the general sticky. It seems to fix the HWL issue.
WOW!
Without even plugging anything in, I:
1) Turned phone off
2) Held Vol. Down + Home button + Power
And that got me into download mode. I will proceed to try flashing back to stock now.
I have tried all the methods in the videos, and the issue is not related to the phone being HWL. It is not HWL. I have used the buttons to access the modes before. So please give me something unique to try besides a button combination, because none of them work. Am I literally the only one in the world that has ever had this problem before? I will paypal someone 50 bucks if they can help me fix this and that's not a lie. Her new phone won't be here for weeks and she is currently without a phone. Maybe I'm doing SOMETHING wrong but it is definitely not a button combination. I have literally tried them all, including with the USB cable in and out, and plugging it in at certain times during the process. Don't you normally get a charging icon when you plug the phone into the computer? All I get is the vibrant screen. Even if the phone is off, if I plug it into a computer without hitting any buttons, it turns on and goes to the vibrant screen. 50 dollars via paypal. You can't beat that. If you don't have paypal I will mail you a check, and no this is not a joke.
So I'm pretty much screwed huh? Can someone tell me if nandroid backups are stored on the SD card on the Vibrant? I will just wait til the new phone gets here and put the old SD card in the new phone and restore it if so.
Related
My phone is stuck on the vibrant scree and nothing happens........ i am trying to use odin to flash back to stick and it is always stuck on file analysis.....please help!!!!!!!!!!!!!!!
Try this: http://forum.xda-developers.com/showpost.php?p=8445823&postcount=11
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Remove the USB from the phone, remove battery.
Place the battery back in your phone and get back into DOWNLOAD MODE
Close Odin
Run Odin as Administrator
Select the 512 PIT FIle
Select the T959UVJFD.tar file for PDA
Plug in your phone (Make sure you see a COM Port come up)
Start Flashing
rolf90 said:
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Click to expand...
Click to collapse
as you i had the same problem and finally got it to work by watching this video on you tube:
1.go to you tube
2.search for flash vibrant
3.first video should be "Flashing Firmware with Odin on Samsung Vibrant" by ZDoomentral, its a 3:00 min video
(sorry can't post direct link but i a restricted since i am a new user)
pay close attention as to how he gets his phone into DOWNLOAD MODE, thats where i was going wrong, and just follow the directions of the video.
my phone is up and running with stock kernel and re-rooted it
man i just want to say i just had this same issue happen to be... im a truck driver and having my phone is serious... mainly to play games or what not...but i just got some from Minnesota and tried the odin method and saw that video on you which help give me a visual and its back up ... im very happy... sad to say it was a careless mistake somewhere but i did a back like i always do and it didnt work for some reason...i had a g1 before this vibrant and ive flashed a lots of roms... but anyway i wanna thank everyone one this forum ... i got my phone back
Does this restart the WHOLE THING? because I have information I didn't backup :/
Yes. It deletes EVERYTHING. Just like it's brand out of the box.
I recommend using Titanium Backup and back all your apps. ALWAYS ALWAYS, do a Nandroid backup before flashing ANYTHING.
scootatheschool1990 said:
Does this restart the WHOLE THING? because I have information I didn't backup :/
Click to expand...
Click to collapse
If you have adb up and running & have the ability to get into recovery while you're bricked you can do aN adb pull before flashing
Adb remount
Adb pull /sdcard
After un-bricking you can adb push the folders back
When I did it..it flash back to stock but I have titanium back up so mt phone is back to how I had it ...and I still have every thing else back on, like my movies music etc..
Sent from my SGH-T959 using XDA App
I was trying to help my friend with his Vibrant and now it's stuck at the splash screen in a loop. I can't seem to get it to download mode or recovery or anything. I've pulled the battery, held down both vol keys while pushing power. Any time I connect the usb, it just starts up the boot loop without giving me a chance to do anything else. I can never get to the green charging battery. Any ideas?
I guess I could provide more info... We had rooted the phone multiple times, but Superuser would FC every time. So, we decided to flash eugene's froyo build (http://forum.xda-developers.com/showthread.php?t=740558). That's when I got the boot loop. Odin said it was finished, and it did not go into recovery. It just started boot looping. Maybe I didn't wait long enough before hitting the power? I'm not sure. Anyway. I'm stuck.
EDIT: Unstuck now. I guess I just need to not panic and read more. I held both VOL keys in while connecting to USB and it went into downloading mode. SO, I flash a stock 2.1 ROM and it's back to the way it was. Calling works fine. No data though. Apparently, that was one of the issues before. I'll try rooting again, but it seems like there's another issue. Also... No settings survive reboots. Like turning on USB debugging... Strange.
So, heres my problem. I have 2 samsung fascinates. I screwed one up a while back and was able to pull it back together and get it into ICS on CM9 with all the proper files using Odin.
I recently got a second samsung fascinate and was attempting to flash the same files, through Odin, but was having trouble.
I was able to get CWR (I believe it was voodoo) onto the phone, but once in recovery mode and having cleared all cache's, wiped files, and factory reset, I still could not successfully instal the files from the SD card (the same ones that worked on the 1st fascinate)
SO
I downloaded another version (or so I thought), Pushed it through Odin, Odin said it passed and auto restarts the phone. The phone never comes back on.
In hindsight think that CWR somehow ended up being deleted from the phone (if thats possible without doing it on purpose) before what was pushed by Odin was actually pushed. The file might have been wrong, im not sure, I will post up the exact file name when I get home.
At this point, the phone is completely unresponsive,. No holding the volume, plugging it in, putting the battery in. Jig doesnt work, Heimdall Doesnt work, Fastboot doesnt work. No download mode, period. No lights, no vibration. Tried multiple batteries, tried assuming the screen was bad, tried multiple cables, tried plugging into wall and computer. Nothing.
Mac will not notice the device at all once its plugged in, however, PC notices and starts to wig out. I have to hold the power button down, while its plugged into the computer to allow for it to search for drivers
The driver is SEC S5PC110 TEST B/D notification.....I feel like this is for a phone other than the fascinate.
Either way, I try to download fascinate drives, or the driver its calling for, both being unresponsive.
Am I completely screwed? Or is the questions more that I found myself at the point the I have either deleted what was deemed "Un-deleteable" or do I need to take the board out and get a soldering iron?
Also, I know a developer, I have taken it to him and he looked at it and scratched his head......hopefully someone has some sort of solution. Thanks
What file did you try to flash?
I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar
This was the file I flashed. Again, in hindsight and based on what I was reading in the forum, it looked good. I have no idea what it actually is, and therfore should not have flashed it. But I was in read and repeat mode, so I didnt question much. If I can track down the exact thread I was in I will post it up as well.
Philveatch said:
I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar
This was the file I flashed. Again, in hindsight and based on what I was reading in the forum, it looked good. I have no idea what it actually is, and therfore should not have flashed it. But I was in read and repeat mode, so I didnt question much. If I can track down the exact thread I was in I will post it up as well.
Click to expand...
Click to collapse
thats what happens when you flash files for another
device to this one. there is a guide in the general section that has everything you needed. hopefully next time you do a bit more research before you get flash happy. at this point unbrickable mod is your only way out and that requires some microscopic soldering skills.
It looks like you flashed a bootloader for the Galaxy S2.
Interesting. It was in a fascinate forum talking about how to add ics to a fascinate phone.....hmm.
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10
This may turn out a bit long...
My s2 has been playing up in one way or another for a few months now such as freezing, turning itself off and kept going into drive mode by itself then last week all my messages deleted and I couldn't send or receive any more and then the next day it turned itself off and I can't get it back on properly. It turns on, goes onto the Samsung Galaxy S2 screen then onto the O2 welcome screen then to the screen with the flashing S then just goes between that and the O2 screen over and over again. Been looking for help the last few days and the main thing I could find was to go into recovery mode and restore it but I can't do that because my home key doesn't work. So nor could I do the second thing I read could help which was to go into download mode and flash it. I didn't even know anything about recovery mode, download mode, flashing, rom, odin or anything else until last week. My phone is exactly as I bought it. I then read about a usb jig which would force it into download mode which I got today and it didn't do anything. I actually couldn't care less about the phone, I would love to just smash it to bits! BUT is there any chance I will ever be able to do anything get it back on just once so I can get my photos and videos off it? I've connected it to the computer but it comes up as an Android Modem so that I can't get the files off that way and it won't connect through Kies either. I know sending it to be repaired would end up with it coming back totally wiped so no point doing that. I normally wouldn't be so bothered it's just there's pictures of my daughter's first birthday and holiday and videos of her first steps. Is there anything else that can be done? Thanks.
There's a 0.000001% chance the phone will boot normally & your stuff will be intact if you can get into download mode & flash a one part stock rom. The more likely scenario is you'll need to flash a 3 part rom which will wipe the device.
You could try ADB to get into download mode, but you're going to need to be motivated to learn how to use it (plenty of tutorials on XDA/elsewhere; search). If that doesn't work for whatever reason, try fixing the home button.
Being a former betting man though, I don't like your chances of recovering data.
MistahBungle said:
There's a 0.000001% chance the phone will boot normally & your stuff will be intact if you can get into download mode & flash a one part stock rom. The more likely scenario is you'll need to flash a 3 part rom which will wipe the device.
You could try ADB to get into download mode, but you're going to need to be motivated to learn how to use it (plenty of tutorials on XDA/elsewhere; search). If that doesn't work for whatever reason, try fixing the home button.
Being a former betting man though, I don't like your chances of recovering data.
Click to expand...
Click to collapse
Thanks for replying. I don't have a clue what a one part or three part rom are sorry! Doesn't look good then. I'm so annoyed. I had planned to sort through my files and get them backed up last weekend because I knew this would end up happening and the stupid phone died on Thursday! I don't think fixing my home button would help because the volume button didn't work much either, it's a wreck to be honest! Had a quick look at ADB, looks complicated but I'll have a proper look later on as a final hope otherwise I'll just have to accept my files are gone for good
Just an update...tried to get into download mode with adb but it doesn't find my phone. Is this because it only comes up as an android modem by any chance? Think I may have to give up hope. At least I will learn from this and back things up a lot more often!
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE!
Zscott87 said:
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE![/QUOTE
Have you tried removing the battery for a couple of minutes ? If you have read a couple of my threads on NH7 4.4.4, once your there downgrading anything is risky. Here is a link to read http://forum.xda-developers.com/note-3-sprint/help/4-4-4-download-mode-t2877528 . Here is a link for a recovery from a hard brick, by creating a boot image and then copy and paste it on a sdcard http://www.rom-central.com/showthread.php?87-GUIDE-HOWTO-Recover-from-a-HARD-BRICK-N900V-NC2-NC4 there are several sites on this type of fix, I just can't remember where they are. However, I do have something that may help, on one of those sites there was a link for someone who has already created a SM-N900P Unbrick img for Sprint and I downloaded it just in case. Here is the link http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick my copy. From what I understand you need to format/erase your sd card then copy and paste the unbrick img to the sd card from a PC. Pull the battery and install the sdcard back in the device, then try and boot the phone into download mode. Here is another link http://forum.xda-developers.com/showthread.php?t=2439367 I have not had to do this so you will have to do a little reading to be sure.
Click to expand...
Click to collapse
The fact that it still shows up as COM is a good sign.
Get a hold of ODIN 3.07+ I had issues with ODIN 3.06.
Here are a few things to try:
1.Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the usb cable. If it boots into download mode, awesome, just put the battery in before you flash.
2. .Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the battery. Hopefully it will boot into download mode.
3. try different cables, remember regular micro usb cables work with the note 3.
Make sure you put the modem file in the phone slot, and the rom/system tar in the pda slot.
Best of luck
Thanks for the suggestions guys! Iguess time is just what it needed. I actually fell asleep after trying for so long, and when I woke up I decided to try once more and VOILA... It let me into download mode! Went back to stock and have since been rebuilding . ha! Thanks again