if im in the us where can i find this version to down load it. i cant track it down on htc support.
spl comes as part of stock roms.
assuming you have a tmous?
if so, any rom that includes 1.42.0000 spl will brick your phone permanently.
care to give more detail what you are trying to achieve, including your phone model?
i have the htc hd2
screen after teh volume reset is
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
its how i have it since i bought it i havent done the update that has been released by t-mobile yet. Id like to get it to where i can flash other roms on it but its at 2.10.0000 and of course wehn i run the program to put HSPL on there it tells me i need first SPL 1.42.0000. any advice would help
i think there are different hspl designed for each spl is
okay, take carefull note of this
you have a 'tmous' or 't mobile us' version of the hd2.
This is important, you WILL kill your phone if you try to flash ANY official rom other than those for the tmous.
You don't need spl 1.42.0000, you need spl 2.08.0000, and that will allow you to use hspl1024 (see in my sig)
go to '[ROM]Leo 1.5 T-MOBILE Test & Stock ROMS' thread in the tmous rom development thread,
find and download rom 2.10.0
connect to usb, run the .exe, let it install, and voila, , , your spl is now 2.08.0000 and hspl1024 will now work.
You are currently in the regular hd2 section, you do not have a regular hd2, you should bookmark THIS and do all your rom finding, etc. there.
Apps, and themes from teh regular hd2 section will work fine on your tmous, but not roms, and especially not radios.
When picking a rom, be sure that the chef has marked it as 'tmous compatible'. If you aren't sure, don't bother.
all is good
i think i made a huge mistake..anyway i'm a noob (still)...so this is my story:
i flashed succesfully wp7 on my hd2 ..so i didn't liked it and i decided to go back on wm6.5 and flashed with a stock rom with 1.42 spl...
now i'm trying again to flash hspl so i can have a cooked rom like before but it gives me an error...it says that i need spl 1.42 in order to do that...but when i flashed the stock rom the spl remained 2.08 and it looks like this:
spl-2.08.hspl 8g XE
cotulla HSPL 0x05 0x40
can anyone help me?
now i made it with hspl2. i have spl 1.42 hspl but i can't flash a custom rom or radio :error code 240?
fix robotic voice running android 2.2 via sd card.
running andriod 2.2 via sd seemed to work ok apart from the robotic voice during calls i'm led to believe that you need to change the radio version which opened up whole new kettle of fish
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Can anyone shed any light on how this is done without bricking the phone permanently? or is there a better way to ultimately run android 2.2 from the sd card.
current spec
os 5.2.21913
rom 3.14.405.2
radio 2.15.50.14
spl -3.03.0000
any feedback much appreciated.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 which works with any spl.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 (download from teh same hspl thread, the link directly underneath the one you downloaded.) which works with any spl except 3.03.0000
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
anubis1126 said:
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
Click to expand...
Click to collapse
There is no HSPL version present yet who is compatible with SPL 3.03
We need to wait sir
Ow Ps, do you have a Branded UK Orange device?
no its unbranded
Any updates on hspl for this yet
if its unbranded just flash a stock 1.66 to downgrade the spl then hspl as before.
Hi. I am on 3.14, i would need to downgrade too...
would this file i found online be good? :
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.0 ΒΆ
7U_2.06.51.07_Ship
Its 1.66.404.1 but not 1.66.0000.. is this a problem?
I need to find a stock rom on NLD (dutch) to downgrade before putting my HSPL... Why is it so hard to find an original file from factory, say 1.42 in everylanguage?
And what is the difference by downgrading to 1.42 or 1.66?
Thank you kind sirs
1.66.404.1 is rom version,,, 1.66.0000 is the spl version.
yes that rom should be fine assuming you have an unbranded hd2. doesn't matter which you downgrade to, they both will allow hspl.
its not at all difficult to find them.
look for "leo official roms" thread, in rom development section, and in there, first post first link takes you to most of the roms.
Samsamuel, thx a lot for that positive answer HD2 is indeed unbranded.
makes me feel better, been in despair with my dutch HD2...
So its finally clearer to me, 0000 is SPL and XXX is rom version
But to Downgrade, a non SPL version is ok then?
But to install HSPL, i need an SPL version?
And one last thing, can i install all of this stuff without booting from SDmini?
Those were the old procedures, no?
Thx!
all stock roms come with a version of spl, but it doesn't say which spl in the filename.
1.43 and 1.48 roms come with spl 1.42.0000
1.66 and 1.72 roms have spl 1.66.0000
3.14 comes with spl 3.03.0000 and hspl doesn't work with it.
the numbers you see in the filename are rom (1.66.404.1) and radio (2.06.51.07) versions, not spl.
when you look in bootloader at spl, it will always end either .0000 or .hspl where 0000 is stock.
it doesn't matter which spl you have, so long as it isn't spl 3.03 then hspl will work and allow you to flash roms andradios.
Thx! Even clearer now
Unfortunately, i am currently on 3.14.. i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
How can i downgrade to those versions who enable me to use HSPL? Once u have a higher rom, it detects lower and u cant downgrade?
Is the only method to flash with SDcard?
zewill said:
i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
Click to expand...
Click to collapse
Then that isn't your stock rom. (Although you didnt say why it didnt work, , ) if its teh right rom it will work
I think i managed to install my English pack allright!
I installed the earliest official pack from HTC, rom 1.48
Then installed HSPL3, then my official HTC WWE 3.14 rom!
Confirmed, it works!!!
Again, Thank you for your time and your explanations of roms!
See you around on the forums, mate!
dont smile too soon, if you flashed a 3.14 rom whilst spl is installed then you will have memory and stability issues.
Go to
settings menu all settings system memory, what does it show for free program memory? around 50meg? should be about 140.
Couldnt really find "memory settings" but what if ound was this:
Total storage: 176 mb
Used storage 56
Free storage 119 mb
TOtal programm 208 MB
Used program 163 mb
free programm 45 mb
NO SD CARD (must buy one tomorrow lol)
So, as u said, its around 40 mb.. What should have i done better?
Also, what is the difference in the SPL?
I mean, from factory settings, i upgraded to 3.14.
With HSPL, i upgraded to 3.14
What difference does it make, isnt it the same? Doesnt 3.03 spl install itself?
Anyways, will be glad to hear your comments on my new problem then haha
not through usb flash. If hspl is installed it remains installed.
3.14 roms must have spl 3.03.0000
Before the 3.14 roms it didnt matter, all roms worked on any version spl, but the 3.14 roms dont.
You should have removed hspl first, (so that your spl ends .0000) then flashed the 3.14 rom, , this allows it to upgrade spl to 3.03.0000
Hhm, i really dont wanna brick my HD2 with all those stability issues.. is there a risk if i leave it like that?
Anyways, i'll restart the instalations then. I checked on bootloader, currently this is what i have: SPL-2.08 HSPL 8G XE
How should i proceed? Should i flash from SD card a 3.14 directly WWE? I have nothing yet on my HD2, (using 3.14 WWE official rom from HTC website) so i dont really care about flashing, reinstalling, hard resets
Just give me advice on how to proceed to have the perfect installation
Is a flash from SD card obligatory? But that would get rid of HSPL, no? and if i get rid of HSPL, my HD2 is going to go back to its original language (DUTCH), right? I want to avoid putting my HD2 in that language...
Say, if i SDFLASH the latest rom WWE (even though my HD2 previously to HSPL only accepted NLD (hence dutch) roms), will it work?
Sorry for taking up so much of ur time, but ur comments are so helpful
connect to usb, put the phone in bootloader.
then
run hspl2
choose 1.66.0000
when phone reboots, quickly hold voldown to reenter bootloader
run the 3.14.exe
Thx for the quick reply.
Why would i use HSPL 2 now, i was using the HSPL 3 before? Isnt it the latest most stable one tu use?
Can i still run HSPL3 and choose 1.66? (i think not actually i only had choice of 2.08)..
So can i run HSPL3 and then re run with HSPL2??? It wont have compatibility issues?
And how to install the exe while in bootloader? Is it a flash from SD Card?
What will happen if i leave my 3.14 in the 2.08 SPL? only stability issues? No risk of bricking, or long term affecting negatively the phone?
So many questions.. hope u can answer all of them..
Also, one last big question: Now that HSPL is installed, isnt it easier to simply, when i recieve my SD card, to flash a WWE official rom 3.14? wouldnt that do the trick? Or i need to go through HSPL2 for sure?
Thx again!
the .exe's are just installers, the spl/hspl inside is the same. So, the 2.08.hspl in hspl3, the actual code that gets flashed to your bootloader, is IDENTICAL to 2.08.hspl in hspl2.
But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason.
Oh, and whilst we're at it, hspl2 detects which spl you currently have and offers you the opposite (so if it finds 1.42.0000 it sets the dropdown to 1.42.hspl)
HSPL3 doesnt do this, it always offers you 2.08.0000 until you manually change it, and many a newb has just clicked OK and thinks they have installed hspl, when in fact they haven't.
Lol, i be one of the many noobs.. But in my bootloader, it says i have installed HSPL, so.. i guess its installed!
Will follow your recommendations, but just one last thing
How to remove this current HSPL3 then and restart the steps with HSPL2? You said that
"But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason"
I used HSPL3 because i read on forums thats its better to use the latest HSPL as the previous versions usually are out of date.. seems i was mistaken then... Also, i used HSPL3 because it was compatible with any 1.XX rom, and i could only downgrade as low as 1.48. Would HSPL2 be able to be installed on 1.48 official rom? I thought highest HSPL2 could work on was 1.42?
So you say that now that i have installed HSPL3, i cannot go back to stock? Im sure there would be a way, but what should i do then?
Should i just flash some stock rom from SD card, hoping it takes HSPL3 away, and restart procedure with HSPL2?
Or with USB sync i can restart the procedure, by just openiong HSPL2 without touching any rom?
Few months ago I installed HSPL 3 and I had no problems at all with WinMo.
Now the DHD Android builds are enough stable for everyday use, so I'm switching to Android completely.
For some strange reason I cannot flash the SPL 3.14 for both sd-card and usb.
On USB, it stops at 0%.
How can I successfully installed the latest stock spl & rom?
Thanks
HTC HD2 WWE
EDIT
PROBLEM SOLVED
Update
I've download the new stock ROM from both htc.com and xda. same problem.
I've format the SD card and I've tried used non-SDHC card.
no result..
EDIT:
I've tried task29 + flash Stock rom.. 1st ok, 2nd Fail.
Flashing a custom ROM no problems at all
sigh..
First of all the 3.14 EU stock ROM's aren't compatible with HSPL; so this need to remove.
Secondly witch error message do you get?
Thirdly do you have a branded device?
kurt-willems said:
First of all the 3.14 EU stock ROM's aren't compatible with HSPL; so this need to remove.
Secondly witch error message do you get?
Thirdly do you have a branded device?
Click to expand...
Click to collapse
I'm gonna try to remove the HSPL, back to stock 2.08
No message, it gets stuck at 0%
No branded phone
I've tryed everything now, I guess
Even Goldcard.. Nothing..
When trying to flash from the SD card simply it doesn't do it..
What can I do then?
EDIT: to make it clear, I've problems updating the SPL from 2.08 to 3.14; otherwise both WinMo and Android are working flawlees
I guess is due to the fact that 2.08 is only for TMob Usa version.. so How can I get back to 1.66 then?
Thxs
hrockh said:
I've tryed everything now, I guess
Even Goldcard.. Nothing..
When trying to flash from the SD card simply it doesn't do it..
What can I do then?
EDIT: to make it clear, I've problems updating the SPL from 2.08 to 3.14; otherwise both WinMo and Android are working flawlees
I guess is due to the fact that 2.08 is only for TMob Usa version.. so How can I get back to 1.66 then?
Thxs
Click to expand...
Click to collapse
YEAAHHHH!!!! I did it!
Using HSPL2 insted of *3 I put OSPL 1.66
And it's upgrading now..
dude, finally!
Hi guys,
I need a support i have installed rom version 3.14.468.2 (with spl 2.08) from official htc site but unfortunetely my windows mobile 6.5 camera doesnt work properly(errors such as not enough memory) in order to recover itself i have to rebbot the device. Can anyone help me which version of Rom i should install.
Thanks
Oytun
Is the SPL 2.08.0000 what was flashed with the 3.14.468.2 ROM? If not hou may need to upgrade hour SPL to SPL 3.03.0000 as I am pretty sure you have a EU HD2 with 512 MB of ROM space. Also what radio version do you have as the radio will affect your camera as well? You should have radio 2.14.50.02 or radio 2.15.50.14 seeing as you flashed the ROM you flashed.
Its the spl, 3.x roms fall apart without spl 3.03.xxxx on regular hd2s.
Into bootloader, USB, run hspl4 and choose 3.03.0000 or 3.03.hspl and reboot, and all should be fine.