Now i'm using Dell Streak from at&t baseband and I using 2.1 from O2 already
but when I try to upgrade to Stephen Hyde's 2.2, it stuck on dell icon more than 15mins everytime i tried. i don't know why ? so i go back to use 2.1
I did install the amss upgrade, so is it because of the baseband or anything else?
Help me please, so confusing with that????
Thanks
Trust_no1 said:
Now i'm using Dell Streak from at&t baseband and I using 2.1 from O2 already
but when I try to upgrade to Stephen Hyde's 2.2, it stuck on dell icon more than 15mins everytime i tried. i don't know why ? so i go back to use 2.1
I did install the amss upgrade, so is it because of the baseband or anything else?
Help me please, so confusing with that????
Thanks
Click to expand...
Click to collapse
flash 1.1, then flash 1.2 without a factory reset in between. this worked for me after being stuck where you are.
This is not Android Development .
Please post a problem about Steve's ROM in his thread and not spam the forum with it .
Related
Hello everyone I'm new here at XDA.
Last monday I bought my Xperia x10 and I came here and learned a little bit about
hackig etc.
At the moment I know how to Install root, busybox, xRecovery, JIT and Dualtouch to my 2.1 phone. Learned these things today.
I found a friendy guide on this forum that shows how to install 2.2 from Froyo.
Friendy Guide
I would really like to install it, but I have no idead how to make my phone back to 2.1 If I install 2.2 Froyo Beta2.
To revert back to 2.1 just update it with SEUS (sonyericsson official update software). I have done it
true. all you need is an official update with seus
Thank you guys
Just 1 question before updating, I installed xRecovery on 2.1 now, if update to 2.2 Froyo
xRecovery is still there?
Oh and is there a root already for 2.2 Froyo?
5xL-Gaming said:
Thank you guys
Just 1 question before updating, I installed xRecovery on 2.1 now, if update to 2.2 Froyo
xRecovery is still there?
Oh and is there a root already for 2.2 Froyo?
Click to expand...
Click to collapse
xRecovery is there and it's rooted
Yeah cool thanks you all!
I noticed, the really pros are here
5xL-Gaming said:
Yeah cool thanks you all!
I noticed, the really pros are here
Click to expand...
Click to collapse
we are here to help
Installed now 2.2 Froyo but it's just rebooting and rebooting -.-
Used backup and restore from xrecovery.
You can used it to go back.
Sent from my X10i using Tapatalk
Try format is with xRecovery
Sent from my FX X10
Already made back to 2.1 with SEUS, I'm just unhappy that 2.2 is only crashing and rebooting ..
5xL-Gaming said:
Already made back to 2.1 with SEUS, I'm just unhappy that 2.2 is only crashing and rebooting ..
Click to expand...
Click to collapse
Make a backup with Xrecovery, so you can get back to where you were easily.
There was a post in How To 2.2 that had a bunch of steps to follow after install, it has been stable for me for days after that. Only a minor problem with Wi-Fi.
5xL-Gaming said:
Installed now 2.2 Froyo but it's just rebooting and rebooting -.-
Click to expand...
Click to collapse
Yeah thats what it does but eventually it will boot
Thanks guys, I'll use now this How to
http://forum.xda-developers.com/showthread.php?t=908791
edit; keeps crashing and rebooting after unlocking the screen. -.-
Just wondering if this is possible, I read that someone was on 8105 build and got the OTA update. I have upgraded to 1.7.0 but having issues and wanted to go to the offical 2.2. Can I just downgrade to 8105 and get the OTA. Does that work? Or is there a STOCK 2.2 rom i can install?
There's a thread on this already somewhere with all the instructions and links to download the official rom. I wish i knew the exact topic so I can link you to it.... goodluck!
Sent from PNB Rapid Remit
androidboy13 said:
Just wondering if this is possible, I read that someone was on 8105 build and got the OTA update. I have upgraded to 1.7.0 but having issues and wanted to go to the offical 2.2. Can I just downgrade to 8105 and get the OTA. Does that work? Or is there a STOCK 2.2 rom i can install?
Click to expand...
Click to collapse
Not Android Development
All Questions should be asked in the Q&A Forum
And as aedillor a good Search would Have helped on this occasion
Moving to Q&A
androidboy13 said:
Just wondering if this is possible, I read that someone was on 8105 build and got the OTA update. I have upgraded to 1.7.0 but having issues and wanted to go to the offical 2.2. Can I just downgrade to 8105 and get the OTA. Does that work? Or is there a STOCK 2.2 rom i can install?
Click to expand...
Click to collapse
I went from DJ_Steve's 1.70 straight to Stock 2.2 with no issues. I flashed the 309 stock Dell recovery via Fastboot and used the stock 318 Dell update package. Google these terms in XDA and you'll find the downloads and more detailed instructions
When I was on StreakDroid 1.6.1, I wanted to go back and compare to stock 2.2, so this is what I did:
QDL Tool to get back to build 305. Download 318 package, click on it. Done.
PS: http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg (this worked on my USA version of the AT&T Streak, for reference)
Hey guys,
finally manage to figure out how to upgrade my streak. but after I upgraded my streak. I dont get any mobile network. there is not 3g. can someone tell me how to fix it? i have tried factory reset. but that didnt work
Had this problem as well and it turns out i had the wrong baseband so it wouldnt recieve a singal... all it had were bars with a little x over it.
I solved my problem by rolling back to 2.1 the upgraded to 2.2 via QDL tool(search for it) and all has been well since HTH.
try installing the amss baseband from the streakdroid link.
i guess your from 2.1 or 1.5...
1.8.1 needs froyo baseband...
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
http://downloads.streakdroid.com/djsteve/amss.mbn
Click to expand...
Click to collapse
flash your phone using Fastboot..
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
It should crash a few times.
But if it continues to do that you may have the same problem i have.
My x10i won't run that rom at all.
Can you try bb 52?
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
TRy the question and answer section
lifty95 said:
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
Click to expand...
Click to collapse
Does it helped???
sent from my x10i CM 6.1.3 v006 undervolted
hi guys, I'm using simple streak 1.2 on my rooted dell streak 2.2.2.. I wana upgrade it to official 2.3.3 so that I can use dj-steve ginger streak.. So I need to know 2things..
1.Is this update 2.3.3 reallybavailable..? and if yes plus provide download link..
2. can u guys provide link for update.pkg for 2.2.2 so that i ll install official rom after unrooting it and will upgrade to 2.3.3..
Thank u guys..
What I need is, I wanna use ginger streak 2.4.4., so pls help me out..
Thanks..
Why not follow the instructions DJ Steve provides in the thread? Doing so is far less hassle than the path you want to use.
msprakashmmc said:
hi guys, I'm using simple streak 1.2 on my rooted dell streak 2.2.2.. I wana upgrade it to official 2.3.3 so that I can use dj-steve ginger streak.. So I need to know 2things..
1.Is this update 2.3.3 reallybavailable..? and if yes plus provide download link..
2. can u guys provide link for update.pkg for 2.2.2 so that i ll install official rom after unrooting it and will upgrade to 2.3.3..
Thank u guys..
What I need is, I wanna use ginger streak 2.4.4., so pls help me out..
Thanks..
Click to expand...
Click to collapse
DO NOT Post the Same Question in 2 Different Forums and Do Not post Questions in the General Forum
Thanks
Strephon Alkhalikoi said:
Why not follow the instructions DJ Steve provides in the thread? Doing so is far less hassle than the path you want to use.
Click to expand...
Click to collapse
I could follow his steps but I wanna know that can i flash ginger streak 2.4.4 directly from 2.2.2..? thanks..
If you follow DJ Steve's instructions to the letter, you'll successfully have StreakDroid on your Streak regardless of what ROM you come from. Why did you think you had to flash the Olleh ROM first?
Strephon Alkhalikoi said:
If you follow DJ Steve's instructions to the letter, you'll successfully have StreakDroid on your Streak regardless of what ROM you come from. Why did you think you had to flash the Olleh ROM first?
Click to expand...
Click to collapse
Dude, i don't want STREAKDROID which i already used.. I want to use GINGERSTREAK 2.4.4 by dj_steve.. in following link u can see that GINGERSTREAK 2.4.4 needs android version 2.3.3 stated by dj_steve.. So how could i get that..? Thanks..
http://forum.xda-developers.com/wiki/Dell_Streak/ROMs
Streakdroid and gingerstreak are the same thing
TheManii said:
Streakdroid and gingerstreak are the same thing
Click to expand...
Click to collapse
Oh thank you dude;-) but in that table why he mentioned android version 2.3.3 buddy..? Thanks buddy..
The first release of gingerbread for the streak was gingerstreak 2.3. Then DJSteve came out with gingerstreak 2.4 and several bug fix releases later we ended up with gingerstreak 2.4.4. All of these are based off of Android 2.3.3. Make sense now?
lordmorphous said:
The first release of gingerbread for the streak was gingerstreak 2.3. Then DJSteve came out with gingerstreak 2.4 and several bug fix releases later we ended up with gingerstreak 2.4.4. All of these are based off of Android 2.3.3. Make sense now?
Click to expand...
Click to collapse
Oh great.. thanks dude,all download today itself
lordmorphous said:
The first release of gingerbread for the streak was gingerstreak 2.3. Then DJSteve came out with gingerstreak 2.4 and several bug fix releases later we ended up with gingerstreak 2.4.4. All of these are based off of Android 2.3.3. Make sense now?
Click to expand...
Click to collapse
Oh great.. thanks dude, ll download today itself
I got stuck in the last step please help guys sine my sim is not recognised..
YOU MUST FLASH THE BELOW BASEBAND AND DSP1 IMAGES TO ALLOW THIS BUILD TO WORK CORRECTLY!!
Quick How to for flashing the above files - assuming you already have fastboot setup and configures on your pc.
1. reboot your streak and hold the camera button down until you get a white screen, then hit the fastboot option in the top left corner.
2. connect to pc and wait for streak to show FASTBOOT_MODE
3. run the following commands to flash the baseband and dsp1 then reboot
Code:
fastboot -i 0x413c flash amss amss.mbn
fastboot -i 0x413c flash dsp1 dsp1.mbn
fastboot -i 0x413c reboot
I fail to do this step so please guide me guys..
I reached fast boot mode in streak but dont know how to run those two comments from fastboot mode.. so help guys..
There are download links for the stock version of Gingerbread in the opening post of this thread. Also detailed flashing instructions. I also recommend that GB ROM.