My phone is running on
OS VERSION:5.2.23569
MANILA VERSION:2.5
ROM VERSION:Cruzer 5th WWE
Radio Version:2.15.50.14
I've had enough of using the Cruzer 5th rom already and wish to update back to the normal Official HTC ROM. I've downloaded the RUU_Updates for both 1.66 and 3.14 and both have failed in updating the phone's ROM.
The problem is that once my cpu has detected the phone.
The phone will then reset and get's stuck on the screen which has a few colors.(The one we use to check our HD2's flash version like HSPL). Then the loader on the screen of my CPU will be stuck at 0%. And guess what...before you know it...the entire operation will cancel and it will say that its not able to update my ROM. What on earth? Please help me. I'm only not able to update back to the official rom software. Apart from that,the other cooked roms which have been made available for download from the other users can be used to update my rom.
I need help. Please help me. Thank You! i look forward to your solutions!!!
You can use other roms and if you look/use the search option your answeres are here somewhere
could be a stuck radio rom, there have been several examples where the radio prevents spl and radio (and hence stock roms) from flashing.
try your CORRECT stock rom from sd card flash, if that fails its either
1 - not actually your correct stock rom or
2 - you are flash stuck. no clue how you would solve that.
LekHD2 said:
Then the loader on the screen of my CPU will be stuck at 0%. And guess what...before you know it...the entire operation will cancel and it will say that its not able to update my ROM.
Click to expand...
Click to collapse
I had the same problem like u 2day. All I did was instaling SPL-3.03.HSPL
At first I had two options like SPL-3.03 or SPL-3.03.HSPL to instal, that first one was making the problem that you writing of, but after I instaled SPL-3.03.HSPL I can instal other roms.
LekHD2 said:
My phone is running on
OS VERSION:5.2.23569
MANILA VERSION:2.5
ROM VERSION:Cruzer 5th WWE
Radio Version:2.15.50.14
I've had enough of using the Cruzer 5th rom already and wish to update back to the normal Official HTC ROM. I've downloaded the RUU_Updates for both 1.66 and 3.14 and both have failed in updating the phone's ROM.
The problem is that once my cpu has detected the phone.
The phone will then reset and get's stuck on the screen which has a few colors.(The one we use to check our HD2's flash version like HSPL). Then the loader on the screen of my CPU will be stuck at 0%.
Click to expand...
Click to collapse
I know you said you downloaded the two ROM's from the HTC website. I don't know if you have a TMOUS HD2 then I suggest downloading the official upstream ROM from the T-Mobile website it is the 3.14 ROM.
I think what has happen to you is you had a bad flash and if you flash the 1.66 ROM first then you changed your SPL and now you don't have the correct split to flash the flash the 3.14 ROM. I recomemd you download and use HSPL 4 to change your SPL to SPL 3.03.0000 then try to flash the update ROM. Or you could flash it via your SD card that should force the changing of your SPL with out you doin yourself. JUst my thoughts on the situation.
Related
can somebody please help me, I have flashed 5 different ROM's to my vodafone HD2 and have encountered a varying degree of problems with each one. I would very much like somebody to tell me where I can get a Stock ROM not locked to any carrier so I can reflash my pretty usless fone or indeed to help direct me to a stable cooked ROM that would allow my fone to work again.
Thanks is advance.
P.s - my first post so please be gently, also the last 3 I have tried are Artemis ROM's with no sucessful outcomes.
peeko1979 said:
[Q] htc hd2 stock rom 6.5.3
Click to expand...
Click to collapse
there is no stock rom that is 6.5.x They are all 6.5
Not sure what you mean by stock rom not locked to a carrier, , do you mean a non branded rom (the ones marked HTC WWE, look HERE or in the various threads in the rom development section.) or do you mean you want to unlock your phone to use any network? in which case no amount of any kind of flashing will do that. Ask voda for a code, or buy one online.
Sounds to me like you need to return all the way to stock and start over. Get any of the voda roms from that link above (theyre marked vodaphone, you cant miss em, theres a 1,43 one, a 1.66 one ((if you're a brit)) or 1.72 if you have a european language voda.
Get that, and either
1 - remove hspl by running hspl.exe and choosing 1.66.0000
then
2 - run the downloaded rom.exe and flash over usb
or
1 - extract ruu_signed.nbh from the rom.exe you downloaded,(look it up if you dont know how) copy it to a formatted fat32 sd card smaller than 8gb, and rename it leoimg.nbh then start the phone into bootloader and it will ask you if you want to flash.
that way you are back to teh start, and you can apply hspl and start again.
(For people reading this thinking 'he didnt say do a task29',, its my understanding that using the official .exe to flash the rom does a task 29 anyway, and its been edited out of customruu.exe so it can be used to flash radios without wiping the rom,,,correct? yes no?)
I try 6 Rom but noone will work fine
Vodafone rom 1.72
I am not looking to unlock the fone, simply find a Rom that is 6.5.3 that is stable. I have just flashed back to voda 1.72 but that is 6.5, im fussy and don't like the start button at the top. I'm in scotland so need something that will work here ok on vodafone.
I was hoping to find a rom that had not been altered and as such an original (Stock) ROM.
your help is much appreciated.
There are no such stock roms for the HD2. If you want to flash a stable rom in the style you like (start button at the bottom) then you will need to HSPL (search the forum) your phone and I suggest you start with Dutty's rom. It's very stable and as close to stock as can be. You can always flash back to an original rom for warranty reasons if you need to.
tnx, trying one now. fingers crossed.
ok, just flashed one of duttys roms but now my phone will not boot, it turns on and stays at the htc splash screen. Wont turn off have to pull out the battery. If it will not boot how can I re-flash it? Any suggestions?
did you flash hspl? you will also need the newer radio 2.15.50_04
Quote from Dutty's first page:
Things to Know how about my ROMs:
* HSPL 1.66 Minimum required
* New Radio 2.15.50.04 can be flashed here:
http://forum.xda-developers.com/showthread.php?t=801252
* :Added XDA UC_NET_v0.94 for Auto install see here for instructions:
Thanks to ahirshfield for recommeding it and serfer222 for great work.
http://forum.xda-developers.com/showthread.php?t=709557
* :HSPL 1.66 Minimun recommended
* :Radio 2.10 / 2.11 / 2.12 / 2.14 / 2.15 NEEDED for ROM
* :No Radio version is included in these releases:
* :Correct radio needed to enabled 576 ram for NON-T-Mous HD2 users.
* HD2 Radios can be found here:
http://htcpedia.com/forum/showthread.php?t=2199
I hope you did some reading before you flashed!!
Put your phone into bootloader by holding the vol down side key and use a pen to push the little reset button when the back cover is removed. You should get a tri colour screen which shows you the hspl version you have. If you do this you can flash the correct radio which is probably why the phone will not boot.
all I have done previously is downloaded .nbh files and used SSPL_RUU.exe to flash and they have all flashed sucessfully, but with the after effects of either connection problems or freezing issues.
I have managed to re-flash to the vodafone 1.72 software so at least it is working again, this is not by any means where my talents lie. im a hardware guy, not software, so finding this all a bit confusing. I may just go with the artemis v33 rom which seemed to work the best apart from occassion signal dropouts.
Just out of curiosity - which hspl and radio are you using?
in the settings it says radio 2.07.51.22-2 and i believe the hspl was 1.42
just checked bootloader, spl 1.66
peeko1979 said:
just checked bootloader, spl 1.66
Click to expand...
Click to collapse
If you are sure it's SPL, than your problems are normal sir. To be able to flash custom ROM you need HSPL ex (1.66 HSPL)
is there another way to check other than in bootloader?
peeko1979 said:
is there another way to check other than in bootloader?
Click to expand...
Click to collapse
No sir only bootloader.
I have just re-flashed v33 artemis, so will stick with that, might look at updatin radio version tho. all help much appreciated but must away now as wokring in 5 hours.
Few months ago I installed HSPL 3 and I had no problems at all with WinMo.
Now the DHD Android builds are enough stable for everyday use, so I'm switching to Android completely.
For some strange reason I cannot flash the SPL 3.14 for both sd-card and usb.
On USB, it stops at 0%.
How can I successfully installed the latest stock spl & rom?
Thanks
HTC HD2 WWE
EDIT
PROBLEM SOLVED
Update
I've download the new stock ROM from both htc.com and xda. same problem.
I've format the SD card and I've tried used non-SDHC card.
no result..
EDIT:
I've tried task29 + flash Stock rom.. 1st ok, 2nd Fail.
Flashing a custom ROM no problems at all
sigh..
First of all the 3.14 EU stock ROM's aren't compatible with HSPL; so this need to remove.
Secondly witch error message do you get?
Thirdly do you have a branded device?
kurt-willems said:
First of all the 3.14 EU stock ROM's aren't compatible with HSPL; so this need to remove.
Secondly witch error message do you get?
Thirdly do you have a branded device?
Click to expand...
Click to collapse
I'm gonna try to remove the HSPL, back to stock 2.08
No message, it gets stuck at 0%
No branded phone
I've tryed everything now, I guess
Even Goldcard.. Nothing..
When trying to flash from the SD card simply it doesn't do it..
What can I do then?
EDIT: to make it clear, I've problems updating the SPL from 2.08 to 3.14; otherwise both WinMo and Android are working flawlees
I guess is due to the fact that 2.08 is only for TMob Usa version.. so How can I get back to 1.66 then?
Thxs
hrockh said:
I've tryed everything now, I guess
Even Goldcard.. Nothing..
When trying to flash from the SD card simply it doesn't do it..
What can I do then?
EDIT: to make it clear, I've problems updating the SPL from 2.08 to 3.14; otherwise both WinMo and Android are working flawlees
I guess is due to the fact that 2.08 is only for TMob Usa version.. so How can I get back to 1.66 then?
Thxs
Click to expand...
Click to collapse
YEAAHHHH!!!! I did it!
Using HSPL2 insted of *3 I put OSPL 1.66
And it's upgrading now..
dude, finally!
Hi all
Apologies if this has been covered before but I cannot find anything thus far. I upgraded my HTC HD2 (Vodafone branded) from 1.72 to 3.1.4. As the device was branded I had to use HSPL (version 3) as Vodafone had no specific version, at that time, and thus used the generic HTC version as it was all that was available at that time. This seemed fine until I hit the, what I now know to be the memory issue, with this combination. At this point after trying a number of custom ROM's, I am using a Dutty Custom ROM (V12, COM2). I decided today, as I just discovered that Vodafone now have their own specific 3.1.4 ROM update available I would flash the 3.1.4 ROM, which I was able to download legitimately from the HTC web site, using my serial number.
I first flashed the stock ROM in the vain hope that the Vodafone had fixed the memory issue. They haven't and thus I decided to remove HSPL. I did this from the installation program and chose the 0000 option which removes HSPL. I then rather stupidly decided to run a task 29, which of course, failed at 0% and just hung totally. It did not time out after 10 minutes, at which point I had no option but to remove the battery and data cable. Fortunately the phone booted up and ran normally. I thus decided to re-flash with the legitimate Vodafone 3.1.4 ROM. as the memory issue still persisted. It failed at 0% just as with the task 29. I now cannot flash ANY Rom unless I install HSPL. I have only tried version 3 thus far.
Any ideas how I can get my phone loaded up with my genuine 3.1.4 Vodafone branded ROM without HSPL and thus avoid the memory issue and load genuine ROMS and updates please? For now I am back to using the Dutty V12, COM2 ROM. Any ideas most gratefully recieved and apologies if this has been covered before.
Many thanks in advance.
Regards,
Paul Lemonidis.
Try flashing to HSPL 2 not 3, and read this thread
http://forum.xda-developers.com/showthread.php?t=609477
Russ
Flash your vodafone stock ROM over SD.
And to be able to install custom ROM, use SSPL_RUU
phone into bootloader
connect usb
run hspl2
choose 1.66.0000
when phone restarts immediately re enter bootloader
run the voda 3.14 rom flash over usb
Thanks
I flashed from an SD Card and all was well. I can now reflash the same version, which I could not before, without HSPL. Thus for the moment I no longer need HSPL. Thus my warranty is valid again and I have a stable phone with the latest correct vendor ROM. I may try a custom ROM again at some point in the future if I experience problems but at least I can say I gave it a fair chance.
As a sideline, Swype works beautifully with this ROM.
Once again many thanks in advance.
Regards,
Paul Lemonidis.
samsamuel said:
phone into bootloader
connect usb
run hspl2
choose 1.66.0000
when phone restarts immediately re enter bootloader
run the voda 3.14 rom flash over usb
Click to expand...
Click to collapse
hi
i am facing the similar issue, cannot revert back to branded ROm it does not boot any further than HTC logo, will the goldcard can do this,,, aslo my branded ROM is 1.72.82124, and reason i want to put back on is that my phone memory after installing custom rom is always less than 12mb then go below 1 mb in few hours..
tried hspl, sspl etc nothing works..
netvpn7 said:
hi
i am facing the similar issue, cannot revert back to branded ROm it does not boot any further than HTC logo, will the goldcard can do this,,, aslo my branded ROM is 1.72.82124, and reason i want to put back on is that my phone memory after installing custom rom is always less than 12mb then go below 1 mb in few hours..
tried hspl, sspl etc nothing works..
Click to expand...
Click to collapse
Take the 1.72 ROM and use the flash from the SD Card method. This will get you back your memory.
The reason for the memory problems is a combination of 3.14 ROM and HSPL.
I own a new HD2....and now i think i bricked it.
I installed HSPL3 on my device and then MAGLDR113 but after reboot nothing happened just white screen and green htc logo
I tried to uninstall HSPL according to manual stated in you tube but loading got lost just after a blink.
My phone is showing this info in bootloader....
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullsHSPL 0x50
PLeaseeeeeeee help me out.....i beg all
look at my post sounds like mine
check out post 9 in this thread sounds like mine http://forum.xda-developers.com/showthread.php?t=961001
not sure if you are tmous tho you may want to start with your shipped or test masd 2.02 rom
As far I can remember, all tutorials said that hspl can be just "uninstalled".
The only way to get rid of hspl (and maglr at once) is to flash original rom
BUT FROM SD CARD.
Tutorial how to do that is in the "sticky" (third sticky in this subforum) section.
or better still, finish the process you started. . . apply a rom.
you cant just "apply hspl, apply magldr" and then stop, you gotta enter magldr and flash a wp7/android rom.
also, if you still have the original radio that shipped with your phone, it wont be high enough version to work.
enter bootloader and flash something like radio 2.11.50.x or higher.
This is not an error or fault at all, just plain user failure.
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
jeetu1981 said:
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
Click to expand...
Click to collapse
Flashing stock rom via usb wont remove hspl!
so dear, you need to know this first...magldr will install in rom replacing your wm6.5......so after you do that you need a nand android build or wp7 to use with magldr or if you want wm 6.5, no need to remove hspl, just reflash the stock 1.48 wwe rom for india...search for that in the forum...this will replace the magldr..........just be sure not to flash the new stock 3.14 wwe rom over hspl..it will produce incompatibilities like small memory....if you want 3.14 rom, first flash stock 1.48 wwe, and then using hspl, uninstall hspl (select 1.42spl )...then install 3.14 wwe rom (be sure to flash india specific roms)
rtomakov said:
Flashing stock rom via usb wont remove hspl!
Click to expand...
Click to collapse
Right, but it will atleast flash a stock ROM, HSPL can be removed later
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
parkarintl said:
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
Click to expand...
Click to collapse
That's good to hear. WP7? I flashed it yesterday and then switched back to WM in just 15 minutes, not my cup of tea.
Thanks
I currently have a MIUI android ROM installed but want to go back to WinMo 6.5 (stock). Now when i try to flash the ROM like i did before, its says on my PC USB Init failed, connection problem. The bootloader screen does say usb. Also when I try to flash trough the MAGLDR flash modus there is USB standing but i cant flash. I've also tried flashing the stock ROM from my SD card as an NBH file but it wont work.. Also repartitioning and all the stuff dont work because they all have te connection problem. I have tried multiple USB cables. Anyone know a solution??
you say that the SD flash doesn't work, can you elaborate a bit more?
explain everything you did, what ROM did you try, if you can give me the whole step by step you tried to SD card flash, including and file name changes etc
SD flash is usually the last resort and if you tried it with a genuine original Stock ROM it should work, albeit it will change the RADIO, SPL and ROM at the same time...
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
cmour said:
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
Click to expand...
Click to collapse
just follow the guide on the relevant ROM that your interested in
but if your playing with WP then use HSPL 2.08
if your flashing a stock ROM via SD as you pointed out it will replace the SLP with the one that comes with that ROM, so it doesn't matter what you do, then you can use HSPL4 to install the required version for the ROM that you want to use. You can use HSPL 4 to revert back to a stock SPL as well, but if you have any doubt at all then just re flash a original stock ROM, you cant go wrong at all then
Well, if i try to flash anything from my pc it says connection error. When I use flasher modus the HD2 freezes and i need to pull out the battery. I also tried flashing the stock ROM from my SD card but that also doesnt work. I use MAGLDR 1.13 and HSPL 2.08 i think. The current ROM is MyMIUI V11.
i managed to install the stock rom but now i cannot install magldr. When i start the installation the hd2 shows bootloader, then goes into the installation screen but after 1 second it flashes back to bootloader.. any help?
are you putting the phone in to the tri coloured bootloader with the word "serial" at the bottom? plug in to a USB port and the word changes to "USB" then install MAGLDR?
just so im clear what you have tried