i upgraded my x10 with seus to 2.1 changing the CDA, but now i would like to reflash with the same firmware. how can i do it?
i have the files that seus downloaded but don't know how to flash them into the phone.
edit.:
i found my answer reading another post. the steps to decrypt the firmware from seus are here http://forum.xda-developers.com/showpost.php?p=9283069&postcount=76 [thanks to delbuenno]. after that, we can use flashtool to flash them to the phone.
rtrotsky said:
i upgraded my x10 with seus to 2.1 changing the CDA, but now i would like to reflash with the same firmware. how can i do it?
i have the files that seus downloaded but don't know how to flash them into the phone.
edit.:
i found my answer reading another post. the steps to decrypt the firmware from seus are here http://forum.xda-developers.com/showpost.php?p=9283069&postcount=76 [thanks to delbuenno]. after that, we can use flashtool to flash them to the phone.
Click to expand...
Click to collapse
Re-run SEUS and select repair
there is no such option anymore. it just says i currently have the most up to date software.
rtrotsky said:
there is no such option anymore. it just says i currently have the most up to date software.
Click to expand...
Click to collapse
Yea, I had that problem sometime back. At that time PC Companion repair worked. I Un-installed both went back to SE site and downloaded SEUS again. This version now gives repair option.
i´ll try that and post back here.
edit:
i uninstalled both and downloaded from SE but i still can't get that repair button to appear. i´ll just stick to the flashtool and the backup from SEUS i have.
thanks for the help man.
Related
I really hope this is not a issue allready answered a gazillion times, but I couldn't find any thread/post about this problem.
I've tried to rebrand my phone to get Telenor.se stock rom to update. I've reverted and flashed nordic .504 rom, changed to telenor.se id in build.prop and then used seus/pcc to try to restore the rom. seus just say "no update", pcc gives the option to restore the rom. When I try to do this, it downloads everything ok and then asks to reboot phone in flashmode. When the phone is in flashmode pcc states that there is no version availible for install.
Any ideas?
Just want to be able to revert back to it in case I have to send it to service sometime, but I'm happy running freeX10 2.2 z-style on it. Had an uptime of 150+ hours on it, so its very stable.
kokbiel said:
Any ideas?
Click to expand...
Click to collapse
Try download your rom from HERE and use THIS tool. maybe it work
rendeiro2005 said:
Try download your rom from HERE and use THIS tool. maybe it work
Click to expand...
Click to collapse
That is what I did, it's those roms that gives me the errormessage in pcc, after downloading the rom in pcc and rebooting the phone into flash, it says it can't repair it.
To clarify, I can flash using those roms, and that tool, but when I try to repair it using pcc it says that it can't.
Could build.prop reset itself upon reboot so the information I entered to get the telenorsoftware is not valid after reboot and when it checks, it thinks that it's the wrong software for my phone?
kokbiel said:
That is what I did, it's those roms that gives me the errormessage in pcc, after downloading the rom in pcc and rebooting the phone into flash, it says it can't repair it.
To clarify, I can flash using those roms, and that tool, but when I try to repair it using pcc it says that it can't.
Could build.prop reset itself upon reboot so the information I entered to get the telenorsoftware is not valid after reboot and when it checks, it thinks that it's the wrong software for my phone?
Click to expand...
Click to collapse
the only i see then is to remove PCC/SEUS and reinstall again. somethimes this work.
i´m sorry but if that doesn`t work i can`t see other way `cause i never had any issues to "revert" back
Hello all
I have been playing around with custom roms and using generic basebands, but lately I need to get back to SE's carrier-specific 2.1 because I believe I have some local carrier settings that I need in order to properly send long sms and mmses. I've used SEUS successfully in the past to repair/reflash.
However after starting up SEUS for the first time in some time, it scans and checks my phone in flash mode and then tells me I have the latest software, but there is no repair button, only an 'exit' that when clicked closes SEUS. I recall vaguely that there used to be an option to repair or reflash? Can anyone help me by giving me some instructions as to how I can reflash using SEUS? Is there some button that I missed? Or is there no such option in the latest version of SEUS?
thanks very mch in advance!
PS I'm not using PC companion as every time I try to repair, after going into flash mode and it says it is 'downloading' the update, it always tells me that 'there is no software available for your phone right now' midway into the process.
Have u used flashtool before? U can use it to get back to 2.1. Its in the development section of the x10 forum. Its on page 1 or 2. Sorry i would post it but i am away from the computer. There is a howto guide by rendeiro2005 inside the flashtool link. Good luck. Will help u wen i get up in the morning lol
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
...Or, maybe you will find your operators' firmware here and follow the steps in the thread to flash it.
NB! Note that it is 1.6 firm, but after flash u can update to 2.1 in the normal way trough SEUS or PCC.
Yeah I used flashtool in place of seus for flashing eventually, but I need a carrier-specific fw.
Thanks G-face for the link but there isn't a Singapore one. Is there no way to reflash using SEUS now?
t3ej4y said:
Yeah I used flashtool in place of seus for flashing eventually, but I need a carrier-specific fw.
Thanks G-face for the link but there isn't a Singapore one. Is there no way to reflash using SEUS now?
Click to expand...
Click to collapse
Seus i believe will give u the latest firmware. It wont put u back at 1.6 if ur phone is already debranded. Sorry i cant help u. I didnt know ur carrier had its very specific firmware. If i come across the help u need i will post it.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
what rom are you running on? i had exactly the same problem a couple of days ago with beta4 installed.
you need to get back to any 2.1 stock rom, then the SE update sw will let you repair your phone.
i had an old xrecovery-backup from the latest update to bb .54, i flashed that via xrec and then it was no problem to repair with pc companion...
I think you can search for the last files SEUS downloaded for you and then flash them back with flashtool, e.g. in my case SEUS downloaded 2 big files to C:\Program Files (x86)\Sony Ericsson\Update Service\db\13740270\blob_fs
One of them is ~150Mb and the other ~15Mb.
Then all you have to do is decrypt them with flashtool and create a bundle to be ready to go. I hope that works for you.
t3ej4y said:
Hello all
I have been playing around with custom roms and using generic basebands, but lately I need to get back to SE's carrier-specific 2.1 because I believe I have some local carrier settings that I need in order to properly send long sms and mmses. I've used SEUS successfully in the past to repair/reflash.
However after starting up SEUS for the first time in some time, it scans and checks my phone in flash mode and then tells me I have the latest software, but there is no repair button, only an 'exit' that when clicked closes SEUS. I recall vaguely that there used to be an option to repair or reflash? Can anyone help me by giving me some instructions as to how I can reflash using SEUS? Is there some button that I missed? Or is there no such option in the latest version of SEUS?
thanks very mch in advance!
PS I'm not using PC companion as every time I try to repair, after going into flash mode and it says it is 'downloading' the update, it always tells me that 'there is no software available for your phone right now' midway into the process.
Click to expand...
Click to collapse
I think I encountered this issue when I tried to play around with the SI number. I managed to get back to my original firmware when I changed my SI number to World Generic, then repair the firmware via SEUS then root and then change back the SI number to Singapore one.
Try this and let me know if it works for you.
prathaban said:
I think I encountered this issue when I tried to play around with the SI number. I managed to get back to my original firmware when I changed my SI number to World Generic, then repair the firmware via SEUS then root and then change back the SI number to Singapore one.
Try this and let me know if it works for you.
Click to expand...
Click to collapse
+1) use the app root explorer, set to R/W, and long press on build.prop file, and open in text editor. Then edit the CDA number from generic back to Singapore. It is repeated twice maybe three times. For example, the x10a global generic is 1234 - 4820, and to change back to X10a Brazil is 1234 - 4836. Save and close changes. Reboot phone.
Find the folder where you saved the Update Service on your pc. Go into the folder and delete the contents of "db" folder. This will wipe any data so Update Service will have to reread your device and download the appropriate firmware for repair software.
Turn off phone. Run SEUS. It Will say that you already have the latest software. REPAIR ANYWAY. DONE!
Below is the link to the thread with all the CDA numbers and detailed instructions.
http://forum.xda-developers.com/archive/index.php/t-824711.html
prathaban said:
I think I encountered this issue when I tried to play around with the SI number. I managed to get back to my original firmware when I changed my SI number to World Generic, then repair the firmware via SEUS then root and then change back the SI number to Singapore one.
Try this and let me know if it works for you.
Click to expand...
Click to collapse
I'll try that tomorrow, looks promising thanks!
agentJBM said:
+1) use the app root explorer, set to R/W, and long press on build.prop file, and open in text editor. Then edit the CDA number from generic back to Singapore. It is repeated twice maybe three times. For example, the x10a global generic is 1234 - 4820, and to change back to X10a Brazil is 1234 - 4836. Save and close changes. Reboot phone.
Find the folder where you saved the Update Service on your pc. Go into the folder and delete the contents of "db" folder. This will wipe any data so Update Service will have to reread your device and download the appropriate firmware for repair software.
Turn off phone. Run SEUS. It Will say that you already have the latest software. REPAIR ANYWAY. DONE!
Below is the link to the thread with all the CDA numbers and detailed instructions.
http://forum.xda-developers.com/archive/index.php/t-824711.html
Click to expand...
Click to collapse
I was just gonna ask for detailed instructions on how to do it thank you for the precise and detailed help! Will and post if it works
Hm I can't seem to find the SI or CDA numbers in my build.prop, can anyone help? I'm using tripnmiui ver 1.0.0 based on froyo 2.2.1, if it's any help
t3ej4y said:
Hm I can't seem to find the SI or CDA numbers in my build.prop, can anyone help? I'm using tripnmiui ver 1.0.0 based on froyo 2.2.1, if it's any help
Click to expand...
Click to collapse
Um, That's because your not running Sony Ericsson firmware anymore.
To get back to stock 2.1 either "repair software" via SEUS or PC Companion, or restore your xRecovery backup if you made one.
There doesn't seem to be a 'repair software' option for me in SEUS, after checking phone in flash mode the only thing I get is 'exit' :/
Ok, then use flash tool 0.2.9 and flash global generic firmwar. Both found here.
http://forum.xda-developers.com/showthread.php?t=920746
Then you can root with the flash tool, and then modify build.prop.
agenJBM...
my x10mini pro stuck at "SONY ERICSSON" logo' after i recovery and install for new ROM.
can i re.flash my phone with SEUS?
Thank's
ableh.X10black said:
agenJBM...
my x10mini pro stuck at "SONY ERICSSON" logo' after i recovery and install for new ROM.
can i re.flash my phone with SEUS?
Thank's
Click to expand...
Click to collapse
It's been a while for me, but repair software via SEUS should work.
My phone was running on 2.1 which was updated through SEUS. To get 2.2, I rooted my phone. Now my phone is back on 1.6 and is stuck there. I used Flashtool to go back to 2.1 so I can install xrecovery and eventually get to 2.2 but now its not working. I get Flash successful massage but when I check my phone it is still 1.6
I have tried 2-3 different Flash tools, 2-3 different ROMs for 2.1 but hasnt worked. I am stuck at 1.6 and only able to make calls and receive messages because after rooting even the GPRS is not working.
I will greatly appreciate some guru taking up my case.
You could give us some more information because there are parts that I seem to miss...
ysk79 said:
My phone was running on 2.1 which was updated through SEUS.
Click to expand...
Click to collapse
So, you updated your phone from 1.6 to 2.1 via SEUS.
ysk79 said:
To get 2.2, I rooted my phone. Now my phone is back on 1.6 and is stuck there.
Click to expand...
Click to collapse
How did this happen? Which rooting method did you use?
Only 2 work in 2.1 as far as I know: Flashtool and One-Click Root app.
Rooting doesn't change your firmware, it's just modifying some files to allow superuser access.
ysk79 said:
I used Flashtool to go back to 2.1 so I can install xrecovery and eventually get to 2.2 but now its not working. I get Flash successful massage but when I check my phone it is still 1.6
Click to expand...
Click to collapse
So, you flashed a 2.1 ROM again but now your phone doesn't work? And it's still on 1.6? Have you tried the Repair option on SEUS or PC Companion?
Ok, this has been happening to a lot of people lately.
Can someone smarter than me find out if SE followed through with their plans to stop rooted phones from using SEUS or PC Companion?
Unknown13x said that this was coming with the 2.3.3 Gingerbread update. He said we will have to be running unmodified stock firmware to be able to run update service.
I'm rooted and on custom ROM and yet PC Companion and SEUS both recognize my phone, I even repaired it with SEUS once to get back to stock.
What strikes me as weird in the OP is how did rooting sent him back to 1.6...
Must have chosen the wrong file to flash from SD to get back to 1.6
My_Immortal said:
I'm rooted and on custom ROM and yet PC Companion and SEUS both recognize my phone, I even repaired it with SEUS once to get back to stock.
What strikes me as weird in the OP is how did rooting sent him back to 1.6...
Click to expand...
Click to collapse
I guess that the OP got confused and used the 1.6 root method(The one that Bin4ry,jerpelea and biktor made). There was a step to downgrade to an older 1.6 firmware to make use of FOTA debug menu.
realunited123 said:
I guess that the OP got confused and used the 1.6 root method(The one that Bin4ry,jerpelea and biktor made). There was a step to downgrade to an older 1.6 firmware to make use of FOTA debug menu.
Click to expand...
Click to collapse
Ah, that would explain it!
Then an update with PC Companion should fix this, right?
My_Immortal said:
Ah, that would explain it!
Then an update with PC Companion should fix this, right?
Click to expand...
Click to collapse
Yes, unless SE have updated SEUS and PC companion to detect rooted/tampered phones. But flash tool should work all the time. Don't know why he is getting issues with it.
My_Immortal said:
I'm rooted and on custom ROM and yet PC Companion and SEUS both recognize my phone, I even repaired it with SEUS once to get back to stock.
What strikes me as weird in the OP is how did rooting sent him back to 1.6...
Click to expand...
Click to collapse
Have you done it recently on the updated SEUS? I am afraid to try. I have read a few others have come and gone with this problem. No matter what they do, the phone resets to 1.6.
agentJBM said:
Have you done it recently on the updated SEUS? I am afraid to try. I have read a few others have come and gone with this problem. No matter what they do, the phone resets to 1.6.
Click to expand...
Click to collapse
Really???
I did it a week or two ago, when I got in reboot loop trying to install the custom kernel and my recovery was broken. Flashtool didn't recognise my phone either,
so I used SEUS. Took me back to the latest 2.1 (2.1.B.0.1).
Maybe it has to do with regions, some may have not received 2.1 officially, so SEUS rolls the phone back to 1.6. Don't know... Now I'm afraid to use it again too!
agentJBM said:
Have you done it recently on the updated SEUS? I am afraid to try. I have read a few others have come and gone with this problem. No matter what they do, the phone resets to 1.6.
Click to expand...
Click to collapse
If you're in the US, shouldn't it take you to AT&T 2.1 release?
Thanks for the discussions but what should I do now? SEUS is not working for me...and flashtool gives me a thumbs up but whenever I check my phone, it is still on 1.6.. Let me know what you guys need to figure out how do I get out of this hole.
ysk79 said:
Thanks for the discussions but what should I do now? SEUS is not working for me...and flashtool gives me a thumbs up but whenever I check my phone, it is still on 1.6.. Let me know what you guys need to figure out how do I get out of this hole.
Click to expand...
Click to collapse
Which firmware are you flashing with FlashTool?
I have rooted my phone xrecovery installed but unfortunately unlocked the bootloader so SEUS support ended then and there. now here is the trick I DON"T KNOW IT WILL WORK OR NOT but in the /db/ folder we have three files which the update service used to flash our phone to the stock can we use the files with flashtool.
XGr7078 said:
I have rooted my phone xrecovery installed but unfortunately unlocked the bootloader so SEUS support ended then and there. now here is the trick I DON"T KNOW IT WILL WORK OR NOT but in the /db/ folder we have three files which the update service used to flash our phone to the stock can we use the files with flashtool.
Click to expand...
Click to collapse
SEUS still be able to restore your kernel and ROM to stock eventhough you already unlocked your bootloader...
StardustGeass said:
SEUS still be able to restore your kernel and ROM to stock eventhough you already unlocked your bootloader...
Click to expand...
Click to collapse
IF it can then why can't I do it with the pc companion as well as SEUS.
SEUS says latest version already installed and pc companion says There is no software available for your phone yet please try again later...........
XGr7078 said:
IF it can then why can't I do it with the pc companion as well as SEUS.
SEUS says latest version already installed and pc companion says There is no software available for your phone yet please try again later...........
Click to expand...
Click to collapse
Flash stock kernel.. Relock bootloader n then use SEUS.. It will work.. Use the repair option in SEUS.. Hope that helps..
Sent from my U20i using xda premium
XGr7078 said:
IF it can then why can't I do it with the pc companion as well as SEUS.
SEUS says latest version already installed and pc companion says There is no software available for your phone yet please try again later...........
Click to expand...
Click to collapse
Just press the repair option, it will send your mini back to stock ROM with 2.1 version.
EDIT: In SEUS, that is...
wrudwulf said:
Just press the repair option, it will send your mini back to stock ROM with 2.1 version.
EDIT: In SEUS, that is...
Click to expand...
Click to collapse
but there is no repair button on my SEUS v2.12.2.14 I am only getting these screens.
I just can't get back to stock.
Altough i have relocked my bootloader.
hello guys..
i really need firmware for my e10i in .ftf file after my phone was stuck in sony ericsson logo..
i will flashing my phone with flashtool, but this flashtool just can read firmware in ftf file..
any one have some solution for this problem?
i really needs some..
thanks..
You could try the repair option in PC Companion. It's by far the easiest solution.
Just about all the downloads for firmware for flashtool has been removed for some reason or other
SmG67 said:
You could try the repair option in PC Companion. It's by far the easiest solution.
Just about all the downloads for firmware for flashtool has been removed for some reason or other
Click to expand...
Click to collapse
thanks SmG67 my phone has been flashed.. but now sim card not detected yet,, do you have any solution for this problem?
See your other post Flash stock and relock your bootloader and hope your radio-capabilities come back