[HOWTO] get files on SD without restart - HD2 Android SD Development

here is a way to get files on your sd-card withaout a restart...
1.Phone off, take out the memory card and copy everything on the PC.
2.The memory card stuck inside again and start Windows Mobile.
3.Unter Windows Mobile format the memory card, it is ne EncFiltLog.menc file generated, do not delete the file please!
4.Phone off again, take out memory card and copy everything from the PC back to the memory card, not only the newly created file EncFiltLog.menc override.
5. Android launch.
hier ne Anleitung, wie Ihr Dateien auf SD-Karte bringt, ohne das Android neu starten zu müssen.
1.Telefon ausschalten, die Speicherkarte rausnehmen und alles auf den PC kopieren.
2.Die Speicherkarte wieder reinstecken und Windows Mobile starten.
3.Unter Windows Mobile die Speicherkarte formatieren, dabei wird ne Datei EncFiltLog.menc erzeugt, die Datei bitte nicht löschen!
4.Telefon wieder ausschalten, Speicherkarte rausnehmen und alles vom PC wieder auf die Speicherkarte kopieren, nur die neu erzeugte Datei EncFiltLog.menc nicht überschreiben.
5. Android starten.
Thanks "motoville" on pocketpc
Danke an "motoville" auf pocketpc

For what's the point? Once this process once or at each change in the files.
Solves my problem, I have to do every time a restart when I put files on the phone or SD-like. Apk `s
​
Many questions, I should have better numbering.
​
_________________________
Für was soll das gut sein? Ist dieser Vorgang einmalig oder bei jeder änderung in den Dateien.
Löst das mein Problem, das ich jedesmal einen neustart machen muß wenn ich Dateien auf das Handy bzw- Sd schiebe wie zB .apk`s
​
Viele Fragen, hätte ich besser Nummerieren sollen.
​

s.supervisor said:
For what's the point? Once this process once or at each change in the files.
Solves my problem, I have to do every time a restart when I put files on the phone or SD-like. Apk `s
​
Many questions, I should have better numbering.
​
_________________________
Für was soll das gut sein? Ist dieser Vorgang einmalig oder bei jeder änderung in den Dateien.
Löst das mein Problem, das ich jedesmal einen neustart machen muß wenn ich Dateien auf das Handy bzw- Sd schiebe wie zB .apk`s
​
Viele Fragen, hätte ich besser Nummerieren sollen.
​
Click to expand...
Click to collapse
Wenn Du das einmalig machst, kannst Du Dateien ohne Neustart auf dein HD2-Android per USB speichern und sofort abrufen.
If you do this once, you can store files without restarting of your HD2 Android via USB and instantly.

Wenn es klappt, bitte kurze Info!!!
If it works, please send a short info!!!

ChaosBoy said:
Wenn Du das einmalig machst, kannst Du Dateien ohne Neustart auf dein HD2-Android per USB speichern und sofort abrufen.
If you do this once, you can store files without restarting of your HD2 Android via USB and instantly.
Click to expand...
Click to collapse
If you change the android build, do you have to make it again? (I supose the answer is Yes).

Werde es heute abend testen. Danke
I try it today. Thx
sent from hd2 xda app

madu2 said:
If you change the android build, do you have to make it again? (I supose the answer is Yes).
Click to expand...
Click to collapse
So far not tested, but think so, because Android creates a new file ...
Bis jetzt nicht getestet, aber denke ja, weil Android eine neue Datei erstellt...

madu2 said:
If you change the android build, do you have to make it again? (I supose the answer is Yes).
Click to expand...
Click to collapse
NO!
I'm really surprised why everybody keep saying that it needs a restart to see files putted on SDcard!
Since my first use of android in june maybe till now i have:
1-formatted my memory card only once in winmo
2-used many many build
3-always copied files from SD / to SD and see them without any restart!!!
However:
You should "safely remove" the SDcard from pc first; then turn off the USB mode (if senseless) or change to "charge only" (if sense) and wait till it shows on notification bar "preparing SDcard" and then unplug the cable!

ChaosBoy said:
here is a way to get files on your sd-card withaout a restart...
1.Phone off, take out the memory card and copy everything on the PC.
2.The memory card stuck inside again and start Windows Mobile.
3.Unter Windows Mobile format the memory card, it is ne EncFiltLog.menc file generated, do not delete the file please!
4.Phone off again, take out memory card and copy everything from the PC back to the memory card, not only the newly created file EncFiltLog.menc override.
5. Android launch.
hier ne Anleitung, wie Ihr Dateien auf SD-Karte bringt, ohne das Android neu starten zu müssen.
1.Telefon ausschalten, die Speicherkarte rausnehmen und alles auf den PC kopieren.
2.Die Speicherkarte wieder reinstecken und Windows Mobile starten.
3.Unter Windows Mobile die Speicherkarte formatieren, dabei wird ne Datei EncFiltLog.menc erzeugt, die Datei bitte nicht löschen!
4.Telefon wieder ausschalten, Speicherkarte rausnehmen und alles vom PC wieder auf die Speicherkarte kopieren, nur die neu erzeugte Datei EncFiltLog.menc nicht überschreiben.
5. Android starten.
Thanks "motoville" on pocketpc
Danke an "motoville" auf pocketpc
Click to expand...
Click to collapse
I don't see why you should remove memory card when you can do all you need from winmo, no restart needed. Maybe i should stop formatting too, don't see the point if you can just delete what you don't need. Its a pain to copy my music all the time .

hd2life said:
I don't see why you should remove memory card when you can do all you need from winmo, no restart needed. Maybe i should stop formatting too, don't see the point if you can just delete what you don't need. Its a pain to copy my music all the time .
Click to expand...
Click to collapse
Just use a wifi file/sync manager?

StephanV said:
Just use a wifi file/sync manager?
Click to expand...
Click to collapse
No, you can copy files from PC to you sd card with phone connected via USB. There is a setting in winmo, its the same in Android too.

doesnt work with chuckydroid, which rom did you use?

I am not sure why this works for some people but not others. I used tytung's HDNEXUS build and it works fine. I transfer files to and from my SD card in android without restarting all the time. I didn't do anything, it has just always worked this way.

I could always transfer files, newer had a problem. It worked with stock t-mobile rom and now works great with energy rom. I can even format the sd card from from windows.

BlackPit666 said:
doesnt work with chuckydroid, which rom did you use?
Click to expand...
Click to collapse
I use EnergyRom...
Ich nutze EngeryRom...
Sent from my HTC HD2 using XDA App

with Clean_6.5_DsE_MM_V6 it didnt work also. so i flashed a original rom, no i got the file.
will be testing the next days and report back

Life Engineer said:
However:
You should "safely remove" the SDcard from pc first; then turn off the USB mode (if senseless) or change to "charge only" (if sense) and wait till it shows on notification bar "preparing SDcard" and then unplug the cable!
Click to expand...
Click to collapse
Would be the easiest way i think.
Gonna try it, ty!

It worked for me.
I always had that problem, very thanks!
MDJ Revolution HD v.1.1

hd2life said:
I could always transfer files, newer had a problem. It worked with stock t-mobile rom and now works great with energy rom. I can even format the sd card from from windows.
Click to expand...
Click to collapse
Welches Build nutzt Du??? Vielleicht gibt es Unterschiede zwischen den einzelnen Android-Builds... Der Sache müsste sich vielleicht mal ein Dev annehmen, warum es bei dem einem klappt und bei dem anderem nicht...
ich nutze phireMOD CM6 1.4b und EnergyRom
Which build do you use? Perhaps there are differences between the Android builds ...
Can a Dev to answer the question, why it did not work for one and not the other ...?
I use phireMOD CM6 1.4b and EnergyROM

just tested it, works great with mdj 1.2 revolution hd rom

Related

ROM Update failed

Sorry, but my english is not very good, but i will try to explain my problem.
I have the O2 XDA Star.
Yesterday I want to update my ROM, but the installation failed by 15%.
Also I tried to install the ROM once again, but the installtion didn't want to start.
Now I also see the 3-color display (blue, green red).
In the left corner of this display you see the text :
NIKI300
SPL-1-16-0000
CPLD-4
Is there a chance to get the XDA running?
Where can I get the original o2 XDA Star WM 6.0 ROM?
Thanks for the help.
David
Are you italian?
No, I'm german.
Try this first m8:
http://forum.xda-developers.com/showthread.php?t=355730
My problem is, that I can't copy some files on my XDA, because the explorer doesn't open the file directory.
Also the ROMUpdateUtiliy freeze by 0%
Vielleicht versuche ich es auch einfach mal auf deutsch.
Mein Problemn ist, dass wenn ich versuchen will ein neues ROM zu installieren, die Nachrichte bekomme, dass die Verbindung zu meinem XDA fehlgeschlagen ist, obwohl ich das Handy über USB mit dem PC verbunden habe.
Kann ich vielleicht nur O2 ROMs benutzen ?
Ich kann zumindest nicht mehr per Explorer auf das Verzeichnis auf dem Handy zugrifen oder irgendwelche Dateien drauf kopieren.
Dass einzige, was ich sehe, wenn cih das Handy starte ist der Rot-GRÜN-Blaue Bildschrim. Ein Hard- oder Soft Reset funktioniert auch nicht mehr.
So langsam denke ich, dass das Handy damit kaputt ist.
Schöne Grüße ...
Hi,
look at this, it just worked for me
http://www.pocketpc.ch/niki-rom-upgrade/42305-htc-touch-dual-rom-upgrade-anleitung.html
Greetings from the cold south
Nothing works!
The problem is that I can't copy the sspl file on my device.
The other problem is that every hardspl stops by 0% because the installer says there's no connection to my device.
Is there an alternative way to hardspl, maybe from sd card?

[Q] Android on HD2

Habe ein HD 2 mit Tmobile Branding und möchte jetzt Android drauf machen.
Dazu habe ich gelesen sollte ich MAGLDR installieren.
Damit ich MAGLDR installieren kann muss ich mein SPL auf 1.42 bekommen ist immoment auf 1.6 iwas.
Wer kann mir mit dem scheiß weiterhelfen ich blick einfach nich mehr durch.
Und ist es ratsam eine Goldcart zu erstellen und wenn ja wie geht das?
Danke allen die mir weiterhelfen bin auch gerne bereit eine Gebühr zu bezahlen und mein Handy weiterzugeben damit mir jemand Android drauf macht.
Translation by Mod:
Have a HD 2 with Tmobile branding and would now make Android on it.
In addition I have read I should install MAGLDR.
So I can install MAGLDR do I get my SPL is at 1:42 iwas IMMOMENT to 1.6.
Who can help me with the **** I look just nothing around by.
And it is advisable to Goldcart create and if so how?
Thanks to all the help I am also willing to pay a fee and pass on my phone it gives me someone Android on it.
Go here and do a lot of reading....
http://forum.xda-developers.com/forumdisplay.php?f=735
I'm using Android on my HD2 with no problems at all...
Cheers,
Gehen Sie hier und wollen eine Menge zu lesen ....
http://forum.xda-developers.com/forumdisplay.php?f=735
Ich bin mit meiner HD2 mit überhaupt keine Probleme ... Android
Cheers,
my hd2 stuck after flash rom used MAGLDR
hi all, i have a problem after install MAGLDR to my HD2 rom, after reboot screen show HTC and no respon...i can't do anything cause usb not detect at pc..
before i flash my rom version is 3.14.707.3(04666) WWE, radio Version 2.15.50.14...and my spl is 1.42 before install MAGLDR...i need help to resolve this problem....plzzzzz
already pushed reset while holding volume down to enter into bootloader screen but can't flash cause my pc not detect usb, and fail to flash.....
the tricolor screen just show about 1 second...after that i connect usb...
no usb word show just serial only....
apat_hsb said:
no usb word show just serial only....
Click to expand...
Click to collapse
ok i already flash the rom...until loading the screen pop up show Error "Install \WINDOWS\PT_PhoneCompanion.CAB failed, code =0x80070005....
apat_hsb said:
ok i already flash the rom...until loading the screen pop up show Error "Install \WINDOWS\PT_PhoneCompanion.CAB failed, code =0x80070005....
Click to expand...
Click to collapse
You can always flash back to stock via SD Card then start over. Go to the HD2 Rom section for direction. Unlike Older HTC Devices, if you install a Rom via SD Card it will reset the phone back to stock. You will need to reapply SPL.
I NAND flashed my HD2 yesterday. I did have issues with it stickign to Waiting for USB after added MAGLDR. However, it finally took. I had to do as the thread in the HD2 section suggested and hook up the phone then open Activesync and uncheck ALLOW USB.
M_T_M said:
Go here and do a lot of reading....
http://forum.xda-developers.com/forumdisplay.php?f=735
I'm using Android on my HD2 with no problems at all...
Cheers,
Gehen Sie hier und wollen eine Menge zu lesen ....
http://forum.xda-developers.com/forumdisplay.php?f=735
Ich bin mit meiner HD2 mit überhaupt keine Probleme ... Android
Cheers,
Click to expand...
Click to collapse
Ja danke.
Aber leider weiß ich net nach was ich da suchen soll.
Kann mir denn nicht ijemand helfen??
SVNetus said:
Ja danke.
Aber leider weiß ich net nach was ich da suchen soll.
Kann mir denn nicht ijemand helfen??
Click to expand...
Click to collapse
oh! Sie meinen den NAND Android? Gehen Sie hier und dieses Video ansehen. Es erklärt alles, was Sie zum NAND installieren.
http://forum.xda-developers.com/showthread.php?t=894423
Cheers,
oh! you mean the NAND Android? Go here and watch this video. It explains everything you need to install the NAND.
http://forum.xda-developers.com/showthread.php?t=894423
Cheers,
htc hd2
hey guys.
i've got a problem.
i want to run Android on my hd2.
the problemen is that i have spl-3.03.000
i have tried to put hspl 2and3 but i get an error with the number00000005
and then wrong or bad spl.
i have tried to download another htc original ROM, but i still have the
spl 3.03.000.
can someone help me.
thx marc

[Q] Helpppppp pls !!!! (wave s8500)

Hello i have instal Badadroid on wave (s8500) and it went but i have macke
full reset and i start now Bada wen is load complet restart my bada automrtick.
pls help my....
Sory for my teribel Englich
In German :
Hallo als ich habe mir Badadroid (android) auf mein Wave instalirt das ging alles .
Doch ich machte das alles in den Werkzustand kommt. Seit da her wenn ich bada starte lät es bis zum menüe und dan geht es wieder aus und es startet ständig neu .bitte hilft mir....
Delete android and "put" new copy of bada?
There won't be more help if you put more "p" letter in the topic...
And my suggestion is delete android and reinstall bada using ml. It should be work...
Like the others already said, delete android and reflash Bada.
askor said:
Delete android and "put" new copy of bada?
Click to expand...
Click to collapse
Sory but my usb port on my wave not worke
You have to reflash your bada-firmware with use of the Multiloader and the download-mode of your phone.
In german :
Du musst deine bada-firmware neuinstallieren. Das geht mithilfe des Programms "Multiloader" und des download modus deines handys
My usb port on my wave not work ....
in German
Der Usb port in meinem Wave ist kaput deshalb suche ich ne andere lösung.
And how do you charge your battery then ?
Wie kannst du überhaupt den akku laden wenn der Usb Port kaputt ist??
I think his PC doesn't recognize the phone anymore..
It is not an USB Port problem, it is a driverproblem.
Welcome to NT 6..
Re-Installing the drivers will be useless. You must tell the Computer which drivers to use.
Auf Deutsch:
Dein PC verwendet die falschen Treiber.. Entweder du installierst die richtigen Treiber(einfach im Geräte-Manager auswählen, denn die Treiber sind auf deinem PC, Windows ist lediglich zu dumm die richtigen zu verwenden), oder Du nimmst n anderen PC / Notebook. Und dann machst Du das, was die jungs schon gesagt haben.. Android runter, Bada neu flashen.
Ich hatte mal das selbe Problem mit dem USB

[SOLVED] [Q] HELP! Im Stuck in a Bootloop :(

Hallo,
I try to explain my problem in short:
Model: GT-i9100
I have Androidversion 2.3.3.
Sucsessfully rooted.....
Then it comes to Flash a customROM I screwed it (((
I followed a german videotutorial. The guy said I have to flash this here via ODIN
OK so far no Problems....after that I had Clockwork Recovery v4.0.1.4
I put the Avatar ROM +gapps on my SD-card (formatted it before)
Then I booted into ClockworkRecovery. I first made a "wipe data/factory reset", then "wipe cache partition", then I wiped the "Dalvik Cache"
Then I clicked on "install zip from sdcard" and searched for the "avatar-2.4b_343_20130323_i9100.zip"
.....nothing !!!
NO FILES FOUND !!!!
Then i rebooted the Device and now I'm stuck in a Bootloop.
Now then the device starts I first see the first logo (with the yellow sign, showing I have a customROM), then the second logo comes there the sound is played and you see the big S in midlle. You see this for a while and then it comes again, this repeats without an end.
Im able to boot in CWM and in ODIN-Mode.
What can I do ? PLZ tell me it is not bricked (((
Can someone tell me from now on what I have to do ? I just want to have the Avatar-ROM, but it seems, that I did something wrong, somethings missing in ma procedure :/
best regards
revnu
EDIT.: could it be, that I didn't see the ROM, because I tryed to flash a 4.2.2 version on my phone which has 2.3.3. is this a problem, do I have to Update to last official version first ?? PLZ I need help
EDIT2: I didn't made partitions to my sd-card. could that be the problem ?
First of all: Sorry that I'm replying this guy in german. He's in trouble and I guess it's easier for him to understand. If someone's interested, just tell me. I can easily translate my posts into English, too
Hallo erstmal. Also wie oben bereits gesagt, antworte ich dir jetzt einfach mal auf Deutsch, weil's bestimmt einfacher für dich ist
Das wichtigste vorweg: Ruhe bewahren. Ich kann dir vergewissern, dass dein Handy nicht kaputt ist. Temporär funktioniert es nicht, klar. Aber das kann man wieder hinbiegen. Du kommst noch in den Download-Modus (ODIN) [<- essentiell.. sobald das nicht mehr funktionieren sollte, wirds brenzlig] und sogar noch ins ClockworkMod. Von daher wird's kein großes Problem werden.
Ein paar kleine Tipps vorweg:
- Folge niemals Video-Anleitungen, die du irgendwo findest. Nur das, was auf xda-developers steht, kommt aus "erster Hand" und ist am hilfreichsten
- Mache, bevor du irgendetwas im CWM "wipest" ein Nandroid-Backup (Is jetz schon zu spät, klar.. aber auch nicht mehr so wichtig )
Also du sagtest, dass du die .zip über "install zip from sdcard" installieren wolltest. Gibt es bei dir in CWM auch einen Punkt der "install zip from external sdcard" heißt? Denn wenn du die ROM auf eine externe Speicherkarte kopiert hast und die dann in dein Handy gesteckt hast, ist das der richtige Punkt für dich
Meld dich einfach nochmal und viel Erfolg wünscht,
experience7
PS: Und den Kopf reißt dir auch keiner ab, wenn du auf Deutsch antwortest. Klar, das hier ist ein englisches Forum und wir auch immer eins bleiben - aber wenn's schon ein Notfall ist
Re: [Q] HELP! Im Stuck in a Bootloop :(
experience7 said:
First of all: Sorry that I'm replying this guy in german. He's in trouble and I guess it's easier for him to understand. If someone's interested, just tell me. I can easily translate my posts into English, too
Hallo erstmal. Also wie oben bereits gesagt, antworte ich dir jetzt einfach mal auf Deutsch, weil's bestimmt einfacher für dich ist
Das wichtigste vorweg: Ruhe bewahren. Ich kann dir vergewissern, dass dein Handy nicht kaputt ist. Temporär funktioniert es nicht, klar. Aber das kann man wieder hinbiegen. Du kommst noch in den Download-Modus (ODIN) [<- essentiell.. sobald das nicht mehr funktionieren sollte, wirds brenzlig] und sogar noch ins ClockworkMod. Von daher wird's kein großes Problem werden.
Ein paar kleine Tipps vorweg:
- Folge niemals Video-Anleitungen, die du irgendwo findest. Nur das, was auf xda-developers steht, kommt aus "erster Hand" und ist am hilfreichsten
- Mache, bevor du irgendetwas im CWM "wipest" ein Nandroid-Backup (Is jetz schon zu spät, klar.. aber auch nicht mehr so wichtig )
Also du sagtest, dass du die .zip über "install zip from sdcard" installieren wolltest. Gibt es bei dir in CWM auch einen Punkt der "install zip from external sdcard" heißt? Denn wenn du die ROM auf eine externe Speicherkarte kopiert hast und die dann in dein Handy gesteckt hast, ist das der richtige Punkt für dich
Meld dich einfach nochmal und viel Erfolg wünscht,
experience7
PS: Und den Kopf reißt dir auch keiner ab, wenn du auf Deutsch antwortest. Klar, das hier ist ein englisches Forum und wir auch immer eins bleiben - aber wenn's schon ein Notfall ist
Click to expand...
Click to collapse
The guys got another thread going about the same thing and hes posting there in English.
I dont know why hes posting links for other sites as it can pi55 people off since ALL he ever needs to know is on this forum.....it has the best people.
experience7 said:
Also du sagtest, dass du die .zip über "install zip from sdcard" installieren wolltest. Gibt es bei dir in CWM auch einen Punkt der "install zip from external sdcard" heißt? Denn wenn du die ROM auf eine externe Speicherkarte kopiert hast und die dann in dein Handy gesteckt hast, ist das der richtige Punkt für dich
Click to expand...
Click to collapse
mein english ist ok, lass uns lieber auf english, damit die hier nicht rummukken weißt ja wie das ist
------------------------------------
I dont have the "install zip from external sdcard" option in my CWM. I even tryed it from ALL menupoints and it says "can find file" (something like that)
thx 4 help
greetz revnu
EDIT: perhaps I should try another method....flashing a customROM via odin ? I have to admit, that I'm a little bit confused, because there are so many different tutorials about flashing
AW: [Q] HELP! Im Stuck in a Bootloop :(
theunderling said:
The guys got another thread going about the same thing and hes posting there in English.
Click to expand...
Click to collapse
Here on xda-developers? Oh, i didn't know this...
theunderling said:
I dont know why hes posting links for other sites as it can pi55 people off since ALL he ever needs to know is on this forum.....it has the best people.
Click to expand...
Click to collapse
Yeah, I have to agree. I am of the same opinion and already told him in german.
revnu said:
I dont have the "install zip from external sdcard" option in my CWM. I even tryed it from ALL menupoints and it says "can find file" (something like that)
Click to expand...
Click to collapse
You still didn't answer my question where you copied the file to. Internal storage or external, removable card?
revnu said:
EDIT: perhaps I should try another method....flashing a customROM via odin ? I have to admit, that I'm a little bit confused, because there are so many different tutorials about flashing
Click to expand...
Click to collapse
I guess this will be the fastest solution. Or since you already have the ROM on your internal or external storage, it's just fine to flash Siyah (for example). It will definitely recognize internal as well as external storage.
Re: [Q] HELP! Im Stuck in a Bootloop :(
Which version of gapps did you flashed? It could conflict with the rom u installed if it's not the right version.
Sent from my GT-I9100 using xda premium
Re: [Q] HELP! Im Stuck in a Bootloop :(
Experience, in the other thread they think he has got stock recovery, not cwm.
This is way better than TV *makes popcorn*
AW: [Q] HELP! Im Stuck in a Bootloop :(
Yeah you're right :'D Thanks for the clarification.. now I'm confused and out.. so much luck solving your issues
Re: [Q] HELP! Im Stuck in a Bootloop :(
Please add [SOLVED] to the title of ur post, as you have got Avatar ROM running.
"To err is human, to forgive is divine"
Sent from my SGS II
Hallo,
my Problem is SOLVED !!
What I did:
first flashed german STOCK ROM v4.0.4 via Odin.
Then I used the signed kernel with CWM6 integrated from Philz.....used the stock recovery mode.
Then I flashed the AVATAR-Rom from CWM
HAPPY HAPPY JOY JOY !!!
sry 4 any stress I made.
@mods:
my treads can be deleted if you dont see any worth for others with same problems. I think so, and apoligize
best regards
revnu
revnu said:
sry 4 any stress I made.
Click to expand...
Click to collapse
I think u did quite the opposite actually.. stress relief...
"To err is human, to forgive is divine"
Sent from my SGS II

Android partition encryption possible?

Moin, ich bin neu im Forum und fang auch gleich mal mit meiner Frage an
Also, ich bin Programmiere und arbeite momentan viel mit Verschlüsselungstools bzw. Programmiere auch diese.
Ich habe mir mal die Verschlüsselung angeschaut von Android. An sich ist sie ok. Leider hat Google das verfahren ein wenig unoptimal gelöst. Denn Android verschlüsselt/entschlüsselt die Daten einzelnd, dies hat den Nachteil das das laden von Resourcen(z.B. Apps/Spiele ect.) erheblich länger dauert. Die Lesegeschwindigkeit kann bis zu 1/3 reduziert werden und das ist erheblich. Ein anderes verfahren wäre die Partitionsverschlüsselung, dies bedeutet das eine Partition KOMPLETT verschlüsselt wird und beim Starten des Handys KOMPLETT entschlüsselt wird. Dieses Verfahren nutzt z.B. auch TrueCrypt für Windows und Luks für Linux. Den einzigen Nachteil den man darauf hat ist das das Booten des Handys wesentlich länger dauern würde. Trotzdem wäre es optimaler, denn ein Handy rebootet man nicht tag täglich wie ein PC. Durchschnittlich ist ein Handy 24h, 7tdW an. Somit wäre dies viel optimaler für den Endnutzer. Denn nachdem die Partition einmal entschlüsselt ist ändert sich von der Performance her garnichts.
Nun zu meiner frage, da Android Geräte ja nichts anderes sind als Linux, wäre es möglich eine Software ähnlich wie TrueCrypt für Android zu Programmieren? So das z.b. ein eigenes Bootmenü beim Einschalten startet worin man das Passwort eingeben muss und nach erfolgreicher eingabe dieses Bootprogramm die Partition entschlüsselt und von da aus denn weiter gebootet wird? Hat da jemand vielleicht Erfahrungen?
Mit freundlichen Grüßen,
Harry Machura
Translation:
Moin, I'm new to the forum and start also equal times with my question to
So, I am currently working and Program the lot with encryption tools or Program the these.
I've even encryption viewed by Android. In itself, it is ok. Unfortunately, Google the procedure has solved a little unoptimal. Because Android encrypts / decrypts the data individually, this has the disadvantage that the loading of resources (e.g. Apps / games ect.) considerably longer lasts. The read speed can be reduced up to 1/3 and is considerable. Another method would be to partition encryption, this means that a partition COMPLETE is encrypted and decrypted when starting the phones COMPLETE. This method uses as also TrueCrypt for Windows and for Linux Luks. The only disadvantage one has it, is it would take to boot the phones much longer. Nevertheless, it would be optimal, since a cell phone reboots not daily day like a PC. Average is on a cell phone 24, 7tdW. Thus, this would be much optimal for the end user. Because after a partition has been decrypted changes from the performance point of nothing.
Now ask about my because Android devices yes are nothing more than Linux, it would be possible to software like TrueCrypt for Android to programming? So the example own boot menu when you turn starts where you have to enter the password and after successful entry of this boot program decrypts the partition and will boot from there, then? Did someone perhaps experience?
Best regards,
Harry Machura

Categories

Resources