[Q] new here...need help - Optimus One, P500, V General

hi guys.. I recently rooted my phone using z4root and was able to root it. what I would need help on is how to backup the settings of my phone (optimus one). the kind of backup where if something goes wrong I can just load my backup settings to start over.
Also, I installed rom manager and it requires me to flash clockworkMod recovery. when I do that it asks me to confirm my phone model but my phone model isn't on the list to choose from.
And once that's taken care of could someone help me flash custom roms.. TY
I'm new to all this, so please bear with me. ^^

DON'T USE ROM manager (clockworkMod)! It will brick your phone! http://forum.xda-developers.com/showpost.php?p=9549856
Just follows steps for custom recovery This will load right manager for you!

Related

Need help ATRIX 4G. Trying to create a nandroid backup

Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Mphill46 said:
Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
try RomRacer's CWM Recovery in the development forum instead.
Thanks I will look into that! Thanks for your response.
Sent from my MB860 using XDA App
Looked into rom racer's forum page still confused
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Mphill46 said:
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Click to expand...
Click to collapse
1) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
2) Download which every color of Rom Racer's CWM you want to your pc (same folder as fastboot files).
3) Boot into fastboot mode and enter fastboot mode.
4) Connect phone to pc, and open command prompt from fastboot folder (shift + right click -> open command window here).
5) Enter fastboot commands from Rom Racer's OP.
6) Enter "fastboot reboot" to reboot phone.
7) Boot into recovery and make sure it worked
*If you still see Tenfar's recovery app on your phone, delete it like you do any other app.
OR
1) Delete Tenfar's Recovery app.
2) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
3) Download ROM Manager from the market (free)
4) Install the CWM Recovery for the Atrix via the ROM Manager App.
5) Use this CWM Recovery
or proceed to install ROM Racer's CWM Recovery...
6) Download ROM Racer's CWM and put it on your internal SD card (/sd-card).
7) Open ROM Manger App
8) Select install ROM from .zip (or something like that - one of the main options).
9) Select the .zip you put there, an uncheck the options (no need to wipe anything).
10) Phone will reboot, install the .zip, and reboot again.
11) Should have ROM Racer's version on the phone now, and be able to enter recovery via the ROM Manager App.
Thank you so much... I will try that once I have some time to dedicate strictly to this...
Sent from my MB860 using XDA App

[Q] can someone help me with clockworkmod?

Ok guys heres the deal....i recently got a samsung fascinate from my sister cause I couldnt mod my inc any more. ok so....i got the phone rooted. i have su perm. i downloaded rom manager and installed it. now heres my problem. i can preform a backup no problem, but when i go to restore that backup it boots into clockwordmod and begins and then get an error about erasing boot img. or something like that. can tell exactly if i get some help from this. also cant install custom roms like i can with my incredible. i know it can be done cause i see roms and all for this phone. can someone please please help me.
Thats because cwm3 will not perform nandroid restores on stock roms. You need to flash cwm 2.5.1.x red recovery. Its the best recovery imo for any bml(touchwiz) rom. Go over to my guide in general section and you cand find cwm 2.5 in section 2&5. Oh and ditch rom manager...manually install cwm via odin!
If you're coming from an incredible, also keep in mind you don't have to be rooted to flash roms either, you just have to have a custom recovery. There aren't really any modifications like rooting procedures, S-OFF, etc, required for rom flashing, just odin a recovery and flash your selected rom.

[Q] Help think phone is bricked

I recently rooted the phone and wanted to install a custom rom. When I tried to back up the current stock rooted rom with rom manager, someone went wrong. So I was then stuck on a flashing black screen. But I can still access Odin/download mode. But whenever I try to flash something, it flashes, but the screen just reboots back to the flashing black screen. Help please I dont know what to do
What firmware base did you start from, and what method did you use to root the phone?
Rom Manager is not recommended for use on the I777 phone. You need a custom kernel which contains ClockworkMod Recovery to back up the phone. Did you try to install ClockworkMod Recovery from Rom Manager?
Need more information before we can help. So, answer the above, and provide as much detail in addition as you can.
I almost messed my phone up by not rooting or flashing a ROM the proper (safe) way and ended up using a return to stock / unroot guide to start fresh and just follow the guides for rooting and installing ROMs from there.

[Q] [HELP] Backup and Restore

So guys I am a newbie, and I am recently searching the internet for the best suitable rooting process for My phone (Symphony W70 - Bangladesh).
And I found many of them, but the problem is I want to back up my original (Stock) ROM, in-case if anything goes wrong or some defect in the cell.
So these are my questions:
1. How to make a backup of my phone's full Stock ROM, Might need if something goes wrong with the device
2. And How to Restore back to the Stock ROM that I created.
I will be really glad if someone help me pls.
Install the Clockworkmod (CWM) recovery in you phone.. then you have the option to take the backup from there.. So if anything goes wrong, you can boot into CWM and install your backup..
1&2. You can't.
Unless you can download a compatible software (your original stock Rom ) leaked by your company (symphony )
After rooting(if you succeed )you may full backup of your rooted Rom with cwm recovery.
『Moved by touch™』 ?
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E

[q] 4010X - how to copy ROM image from a different phone

hello
I need suggestion from you guys.
I s*crewed up my rooted Alcatel 4010X with rua1 CWM installed ; its bricked now and I cannot install a new zip neither back up a custom ROM.
I cannot flash using SP tool either , I tried and tried and I am totally stuck.
The only option I have is to recover the ROM copy from another working phone with the same network and make and model , but is it possible to do that without rooting the other person phone, i.e but just swapping the SD cards and taking a backup.
Please someone could comment, I do not want to root the "working phone", my friend will not allow me !
Thanks

Categories

Resources