OK, I wanted to format the internal storage so I Task 29 it.
It told me to hold the volume down button when it reach 99%
Well it stopped at 96% for a while, so I held the volume button down
Now when I turn on the screen, it just shows the loading screen towards that CleanEx rom and nothing else!!!
Bootloader mode only supports disk drive connection to pc so I don't think that's appropriate.
I need help because I am about to give this phone as a gift
THANK YOU IN ADVANCE
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
A new hacker said:
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
Click to expand...
Click to collapse
have you flash a correct radio FIRST??
geppo1975 said:
have you flash a correct radio FIRST??
Click to expand...
Click to collapse
It was flashed before, the correct one IDk.
A new hacker said:
It was flashed before, the correct one IDk.
Click to expand...
Click to collapse
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
geppo1975 said:
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
Click to expand...
Click to collapse
Can you provide assistance with that? That is a new term to me
A new hacker said:
Can you provide assistance with that? That is a new term to me
Click to expand...
Click to collapse
that's mean your file(rom or radio)in download or upload has lost some parts or file!!You can try to dwld from other server or try again from same...sometimes happens
you task29d, do you even know what that means? it means you formatted your phone there is no rom on it, how can it boot with no rom?
enter bootloader, connect usb, (yes bootloader is fine),, flash a rom.
OK, sorry for the fuss. Now it seems that usb is working but when I try to upgrade the Rom (official) the percentage just stays at 0% and gives some error messages. Please help
A new hacker said:
and gives some error messages.
Click to expand...
Click to collapse
aww c'mon, at LEAST tell us the error
It says [connection] cannot establish (I've done all the things listed)
Error [262] thanks for the assistance
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
- Are you well connected over Active Sync?
- Did you test it on a other USB port?
- Did you temporary deactivated your AntiVirus?
- Try to reset device and pc
- On Windows vista and window 7 don't forget to run RUU_Leo_S_HTC_... as administrator
This are some suggestions that can solved connection problems.
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
timmymarsh said:
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sorry for the bad news but can you visit this forum? It has more details and updated news. and i like to emphasize that the usb doesn't work, disk drive or activesync
http://forum.xda-developers.com/showthread.php?t=891115
thread closed now redundant, linked thread continues.
Related
Hi,
I want to flash a new rom to my HTC TOUCH DUAL.
if i boot in three color modus it says
NIKI200
SPL-1.22.0000
CPLD-4
Click to expand...
Click to collapse
But if i want to flash anything, after a while i get "Connection error".
How do i flash it ?
Thanks in advance
Try to flash HardSPL/USPL to your device first...
vcdwelt said:
Try to flash HardSPL/USPL to your device first...
Click to expand...
Click to collapse
That failed too
Can you send me a link with a tutorial to flash USPL?
Take a look to this Thread: http://forum.xda-developers.com/showthread.php?t=355730
There you can find a Tutorial for flashing SPL to your Device.
vcdwelt said:
Take a look to this Thread: http://forum.xda-developers.com/showthread.php?t=355730
There you can find a Tutorial for flashing SPL to your Device.
Click to expand...
Click to collapse
That's not HARDSPL?
Dennus2008 said:
That's not HARDSPL?
Click to expand...
Click to collapse
It's about all SPL's (SSPL,USPL,HardSPL) just start reading there
vcdwelt said:
It's about all SPL's (SSPL,USPL,HardSPL) just start reading there
Click to expand...
Click to collapse
So i try to flash the USPL, it hangs on 0%, and 2 minutes later i get "Connection error".
What am i doing wrong?
I had exactly the same problem (also my phone was sim unlocked).
Try to use Niki SuperCID
http://forum.xda-developers.com/showthread.php?t=395945
i used that, now i can flash any rom i want.
369011 said:
I had exactly the same problem (also my phone was sim unlocked).
Try to use Niki SuperCID
http://forum.xda-developers.com/showthread.php?t=395945
i used that, now i can flash any rom i want.
Click to expand...
Click to collapse
Not working too
I think the problem is in your pc
Tim4 said:
I think the problem is in your pc
Click to expand...
Click to collapse
Could also be a bad usb cable...
rling said:
Could also be a bad usb cable...
Click to expand...
Click to collapse
Oke, i will try a new usb cable
I'll keep you all updated
Dennus2008 said:
Oke, i will try a new usb cable
I'll keep you all updated
Click to expand...
Click to collapse
It´s not working with a new usb cable
Dennus2008 said:
It´s not working with a new usb cable
Click to expand...
Click to collapse
I found something, at the moment my phone boots into the three-color screen, the activesync connection is lost, and won't come back.
Is that normal?
it's normal.
Try this one
1)Download original ROM
2)Disable afirewall/antivirus software
3)Unplug ethernet cable
4)Uninstall activesync
5)Restart PC
6)Boot phone in three-color screen (Bootloader)
7)Try to flash original rom
if you still have no success, there is two possible reasons:
1)Problem in your PC (Just reinstall windows, formating will be good to )
2)Problem in phone's flash memory (Only service center can help you)
how about sd card flashing
How come nobody gave him the option to flash using the memory card, dont know how to name the nbh file (NIKIIMG??) but that could work for it, whoever has the name for the image should also update it to the wiki..
Hi Experts,
I was trying to load a India official ROM on my UK Vodafone HD2, and it now always shows this ROM is not suitable for ur phone, please upgrade the correct ROM. The phone now only shows this message. I tried to load a Custom ROM through SD card. It installs but at the end when I press the reset button, it again displays the same message in RED.
Please help.
A beer from me if you get this one cracked for me.
Regards
Chirag
1st turn back on your previous stock ROM.
Than read/follow this:
http://forum.xda-developers.com/showthread.php?t=591314
Sorry, but how do I go back to my previous Stock ROM?
chishree said:
Sorry, but how do I go back to my previous Stock ROM?
Click to expand...
Click to collapse
1) download the correct stock ROM by using your S/N
2) Connect your device over ActiveSync
3) Run your downloaded file.
the phone isnt booting, cannot connect to active sync. it stucks at the message screen.
chishree said:
the phone isnt booting, cannot connect to active sync. it stucks at the message screen.
Click to expand...
Click to collapse
Try then to flash over SD
1) Prepares your SD (<8GB SD Card)
a) Format your SD by FAT322) Take the "RUU_signed.nbh" from your ship ROM and copy it to the SD card.
3) Rename the "RUU_signed.nbh" to "leoimg.nbh".
4) Reset the device while pressing the volume down button.
5) Follow the instructions on your screen.
so i have this ruu.exe from HTC with, how do i get the .nbh from it. ignore my foolishness here, as i m not much tech savvy.
chishree said:
so i have this ruu.exe from HTC with, how do i get the .nbh from it. ignore my foolishness here, as i m not much tech savvy.
Click to expand...
Click to collapse
No problem sir,
When you get the .exe From the ROM; right click on it and select extracting by (WinZip/WinRar/7Zip)
Then you will see a lot of files in it; just take out the "RUU_signed.nbh"
i'll try this, and if it works a beer comes ur way as a thanks from me.
Make attention to Download and use the UK Vodafone ROM!
Edit;
This was the latest one: ROM version:1.72.161.3
here comes your beer, enjoy.
Sorry but how much is the beer cost? let me know and i shall transfer to ur paypal.
chishree said:
here comes your beer, enjoy.
Sorry but how much is the beer cost? let me know and i shall transfer to ur paypal.
Click to expand...
Click to collapse
You are free sir, there is no minimum.
happy christmas.
3US$ in ur PayPal now, thanks once again
Hi,
Any idea on why my external speaker isnt working?
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.
After having problems with Android NAND i have decided to move back to win mobile 6.5, so i flash back to 3.14.xxx
every time when i turn off and on the phone its do everything that a first time boot do, after ages when the phone finally gets on all the settings are stock,
any solution for this ?
Did you run a Task 29 before flashing the Win Mo ROM?
T-Macgnolia said:
Did you run a Task 29 before flashing the Win Mo ROM?
Click to expand...
Click to collapse
yes, i did
Hmmm what ROM is it? Is it a official or custom ROM?
T-Macgnolia said:
Hmmm what ROM is it? Is it a official or custom ROM?
Click to expand...
Click to collapse
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Gihanfx said:
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Click to expand...
Click to collapse
Ok that is a official ROM. did you get it from HTC.com using your serial number to confirm it is for your HD2? Also have you thought about flashing it via SD card?
Oh and you don't have to hit the thanks button for every reply but thank you for the gesture.
T-Macgnolia said:
Ok that is a official ROM. did you get it from HTC.com using your serial number to comfirm it is for your HD2? Also have you thought about flashing it via SD card?
Click to expand...
Click to collapse
Ill try and it let you know, Thanks a lot
Gihanfx said:
Ill try and it let you know, Thanks a lot
Click to expand...
Click to collapse
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
T-Macgnolia said:
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
Click to expand...
Click to collapse
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
did everything as in the guide, but still the same problem
Gihanfx said:
did everything as in the guide, but still the same problem
Click to expand...
Click to collapse
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
T-Macgnolia said:
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
Click to expand...
Click to collapse
Thanks again for the Help, after installing the new ROM i got far too many errors, but i restarted the phone so many times and things are back to normal, still when i access google maps the phone restarts and cant access the market place cus the update always fails, i also feel there is something wrong with the memory, anyway thanks again
Hi,
I have been updated my G9 device firmware to 4.05. During update everything was ok. After update, a message appears that say "Starting applications". After 15 minutes nothing happened and mistakenly I have restarted my device. After restarting, archos welcome screen appear but nothing occur!
Also I try to fix it by recovery options like:
1- Repair System>Check Disk : No problem found!
2- Upgrade firmware: Downgrade firmware show me error 221 and trying to install 4.05 is successful but after installation my problem exist yet!
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
I'm so upset! Please help me to fix this problem...
is your device fully charged
Shano56 said:
is your device fully charged
Click to expand...
Click to collapse
Before update, it was 88% charged!
Did you try to flash the new official non-rootet rom?
SE-X1 said:
Did you try to flash the new official non-rootet rom?
Click to expand...
Click to collapse
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
do a re-format device, not an upgrade...it should solve the problem
Masih60 said:
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
Click to expand...
Click to collapse
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
what is the name of the file you are using?
pbarbosa said:
do a re-format device, not an upgrade...it should solve the problem
Click to expand...
Click to collapse
Dear friend, I told that...
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
Anyway... Thanks for trying to help!
pbarbosa said:
what is the name of the file you are using?
Click to expand...
Click to collapse
It's: "firmware_archos_it4.aos"
TjaXanK said:
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
Click to expand...
Click to collapse
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
Try what i told you to do... that error means there is a prblem with the update file, so either it's corrupt or the file name is wrong
HI !
Please ..can you try also ? - press 10 sec. on power ( until the green light closed).... now .. while pres volume down ...press power ( and don't release ) until you will entry in recovery (SDE) ! Now try to do Format System-> Reformat Device-> I Understand -> OK! and wait a while until a new driver appear - > now copy Stock Archos ICS 4.0.5 .aos file into it and flash ! I hope will work this method ! Good luck.
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
svennimann said:
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
Click to expand...
Click to collapse
use this instead
http://update.archos.com/9/gen9/gen9_4.0.5/firmware_archos_it4.aos
Masih60 said:
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
Click to expand...
Click to collapse
Which tools do you use for download? I had the same error 221 and then I read somewhere (maybe in this forum) that Mozilla actually recognizes the archive format, unpacks the file for virus check (or whatever else), and then re-packs it. But the original file is digitally sighed by Archos, and the repacked one is not. That is why the updater rejects it. Since that, I did a couple of successful upgrades using the most basic tool, wget, to download the file to my PC first. Try this.
The following seems to be the result of the bad update script. Which version did you start from? Not too old? It looks like the script deleted the existing software first, then checked the new file, and rejected it - and what to do next?
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
use
RECOVEY (ON OFF/ VOL -),
RESET ANDROID via REPAIR SYSTEM and FORMAT SYSTEM.
Install the firmware
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Masih60 said:
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Click to expand...
Click to collapse
Glad to have helped
iourine said:
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
Click to expand...
Click to collapse
Ok, I had time to experiment todaya nd now I do know definitely that I was wrong - at least, for the current version. Downloaded the file a few times by both Mozilla and wget, calculated the checksums - it is identical and successfully recognized by the updater. So the above error is nothing but a spontaneous download error, once it occures - just reload the file. On the other hand, wget is very resilent to transmission errors, so file corruption is less likely while using it.