My 101 came with a defective LCD cable.... so me being me I popped it open and managed to get the screen working.... within a matter of a couple days it was right back to how it was.... upon re opening I realized the LCD ribbon cable was making VERY poor connection just before the LCD screen connection. I have looked for a few days now to locate a cable to no avail.... If anyone could help me out,.. or sell me a working cable that would be awesome!
ribbon
hi there i now this a long time ago but did you find the ribbon for your archos 101 as i need the same cable
regards dav
Related
So I cracked my LCD screen, bought a replacement, opened up the phone w/ little incident (man they really do cram a lot in there!) and I powered it on.....
the screen is just white, if I fiddle with the connection at where the LCD connects into what I believe is the digitizer I can kind of see a keypad button layout.
What do these symptoms describe and does anyone have a link to the service manual?
Thanks in advance for your time.
I had to replace the LCD on a wizard so here my experience... Make sure the two data ribbons are inserted securely. Also, before you power on, plug your hermes into your computer (assuming your computer is on and logged in as an admin) via USB (this sounds weird but I had to do this for some reason....) and then turn on the wizard.
If you still have a problem, you may have damaged something more than the screen.
Good luck.
Ok I will give plugging it in a shot.
Before you plugged it in what did it do when you powered it on?
anyone else have any input on what the issue could be?
It could be wrong LCD. There are two types of LCD for hermes/wizard with same connector but they are different. One is with gold flex cable, the other is with black flex cable. First one is most popular on wizards, the other on hermes. Check what was the color of your previous lcd flex cable and the new one.
Instructions
Can anyone post the instructions on how to take the lcd apart ?
I have gotten this far
http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
I'm a bit afraid to go on without instructions
Here is the lcd I got
http://cnn.cn/shop/8525tytn-touch-p-87.html
hi
i have a htc touch plus or as they call it htc touch dual.digitizer issue it stoped responding so i bought new one fitted in and still the same problem .i think is a software problem i guess driver software for touch screen .if any one can help please
thanks
Touch Dual digitizer
Hi Saliml2
Not convinced it is a software issue. My digitizer on T-Mobile Touch Plus did the same thing. It stated behaving erratically and then stopped responding altogether. I replaced the digitizer (via eBay) and it work for a few days and then stopped again.
I have read around the internet and have tried several ROM updates etc (currently running a WM 6.5.5 found in other area of this forum) but this has not solved the problem.
It seem to be an alignment issue - i.e. screen alignment is outside the screen area, but there seems to be no way of getting it back. Could be a fault on the phone mainboard (?) but there doesn't seem to be any info around apart from sending it to HTC for repair (not viable as the phone value negates this)
My phone is still not working, I might try opening it up again and reseating the digitizer cable but have done this twice already.
Have you try change the flex cable?
I had one to, with the same problem, and after changing the flex everything was ok...
Good luck!
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
deepthought2471 said:
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe this is helpfull http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/
Goodluck
Flex cable, i was mean the cable between the mainboard and the lcd block, you can see it in the previous link, picture 20. Have you try it to change?
hello guys how did you manage to put the digitizer cable in place mine doesn t seem to get in place do i need something to hold the connector in place???
Hello all.
While I was taking my HD2 apart to replace a cracked screen (glass digitizer) I accidentally broke the connector off one of the wires. The wire is black and a few inches long with a silver and round press on connector on each end. It attaches to the board that houses the vibrator motor and runs down the right side of the phone (if you were looking at it face down and partially disassembled).
Unfortunately, I lost the metal piece that broke off the wire (the thing is tiny!), so I can't just solder it back on. Any idea on where I can buy a replacement? I've spent about 6 hours today on ebay and google to no avail. Searching for "HD2 black wire" and anything similar is hardly efficient, but that's all I know about it.
Any help appreciated.
Thanks,
Chris
Good question, I think I damaged the cable to the volume buttons so it would be cool if someone has an adress where we can get spare parts except LCD and Digitizer..
this guy on ebay seems to be selling an HD2 in parts. you might find what you need here:
http://stores.ebay.co.uk/Right-Click-Enterprises/_i.html?_nkw=hd2&submit=Search&_sid=131407386
Thanks, I sent that guy a message and hopefully it'll work out.
Anyone else have a source?
connector of my hd2 is also broken HTC says that the mainboard must be change and I have to pay € 230 because that is my responsibility
I think you have damaged your coaxial cable connector for wifi and bluetooth. Google will help you perhaps.
I believe that my wifi/bluetooth cable is broken, as I have no wifi or bluetooth signal since dropping my phone as reported in a previous post of mine. Can anybody advise me on the difficulty of undertaking this repair myself, does it involve complete disassembly of phone, any soldering etc. If this is the case I don't feel confident enough to do this so does anybody know of someone who does this sort of repair, I have found the cable on e bay for £7 and it looks like it has push on connectors ?
if the connectors on the boards are not broken then all you need is the coaxial cable with connectors on the two end. you need not disassemble the whole set, just open the back cover, connect one end of the cable to mother board and other end to the rigid flex board and that's it.
WiFi and Bluetooth not working
raincybercafe said:
if the connectors on the boards are not broken then all you need is the coaxial cable with connectors on the two end. you need not disassemble the whole set, just open the back cover, connect one end of the cable to mother board and other end to the rigid flex board and that's it.
Click to expand...
Click to collapse
Do you think that this is my problem as since I dropped my HD2 I have no wifi (unless sat ontop of router) or bluetooth or fm radio, is it easy to get to the coax cable by removing back cover, whereabouts is it ?
raincybercafe said:
if the connectors on the boards are not broken then all you need is the coaxial cable with connectors on the two end. you need not disassemble the whole set, just open the back cover, connect one end of the cable to mother board and other end to the rigid flex board and that's it.[/QUOTE
Fixed it, opened up phone and spotted that at one end of the black wire the connector was not pushed onto the motherboard securely, I pushed it home and hey presto, wifi and Bluetooth now working, phew, Thanks for your help !
Click to expand...
Click to collapse
I have a Archos 101 G9 and a few weeks ago the charing port started getting loose. Two days ago the metal sleeve completed disconnected from the unit and although is still inside the port, I am not able to charge the unit. Its out of warranty and I cannot afford (or justify the $100+) necessary to have Archos fix it. I was wondering...can the unit be charged using a USB cable connected from the 3G port to my computer? Or how easy would it be to reattach the metal sleeve back where it belongs? I'm OK with opening up the back of the unit, especially since its basically a "brick" now but how easy is it to reattach the charger sleeve?
Any help would be most appreciated. I tried looking for a previous post RE this issue but could not find it.
Thanks
Is your problem fixed ?
You can buy and braze new port. I haven't other ways.
Hi
I'm hoping someone can help me. I have an Archos 80 G9 given to me as it wasnt charging, the connector had come off the board but I have re soldered it back and now charges fine.
However whilst I had the tablet was apart the touch screen no longer works, (whether a connector is broke or not I am unsure.) I am hoping someone has a picture of how the inside is supposed to look like or take a picture then I can begin the process of elimination.
Many Thanks
Hi,
I had a similar problem with an Archos, it turned out the screen just needed to be configured again
Hold power and volume up on boot till the white screen
Repair system
Force touch screen calibration
---------------
If this doesn't work check your connection on the two ribbons connected to te motherboard that is the only two connectors from screen to the board, the other two white and black wires are power and signal for wireless.
Good luck