Hi,
I've been running vegan 5.1b happily for sometime (and 3.0 etc before). Everything works, except for bluetooth headset connection: GTab keeps saying that it pairs with my device but it's not connected. I searched the forum but I couldn't find any solution; any suggestion?
Thanks!
case-sensitive said:
Hi,
I've been running vegan 5.1b happily for sometime (and 3.0 etc before). Everything works, except for bluetooth headset connection: GTab keeps saying that it pairs with my device but it's not connected. I searched the forum but I couldn't find any solution; any suggestion?
Thanks!
Click to expand...
Click to collapse
I use one all the time with Beta5.1. Will your headset connect with other stuff?
mine will show as "paired" but that does not mean its connected at that moment.
Flick on your wifi settings go under blue tooth, click the head phones and MAKE it connect.
let us know if that works.
Sprdtyf350 said:
I use one all the time with Beta5.1. Will your headset connect with other stuff?
Click to expand...
Click to collapse
I have two BT phones and a BT headset (samsung WEP460). The headset does connect to the phones so at least the headset works.
Allenfx said:
mine will show as "paired" but that does not mean its connected at that moment.
Flick on your wifi settings go under blue tooth, click the head phones and MAKE it connect.
let us know if that works.
Click to expand...
Click to collapse
My Gtab with vegan 5.1b does pair with all three BT devices but it won't connect. I long-pressed the headset icon on the Gtab to bring up the options; I clicked both "connect" and "audio devices" but it does not do anything.
I was on TnT Lite 2.2 before switching over to vegan (3.* and now 5.1b), and back then I was able to use BT to transfer files between my phones and GTab. Did something happended in between? (I did not try BT in vegan 3.*)
Thanks!
case-sensitive said:
I have two BT phones and a BT headset (samsung WEP460). The headset does connect to the phones so at least the headset works.
My Gtab with vegan 5.1b does pair with all three BT devices but it won't connect. I long-pressed the headset icon on the Gtab to bring up the options; I clicked both "connect" and "audio devices" but it does not do anything.
I was on TnT Lite 2.2 before switching over to vegan (3.* and now 5.1b), and back then I was able to use BT to transfer files between my phones and GTab. Did something happended in between? (I did not try BT in vegan 3.*)
Thanks!
Click to expand...
Click to collapse
Anybody got the Bluetooth working with vegan 5.1?
I am having same issue. I think it might stem from not being able to enter the pair code into GTablet? The direction for my headset say i must type in 0001 on my phone after pairing. GTablet does not seem to have any way to do this.
Any Ideas?
For what it's worth, I haven't had any issues using my Rocketfish BT headphones with Vegan 5.1.
I use a Sonorix BT adaptor with regular sound isolation ear buds on vegan 5.1. It works great!
Pair then go into tablet bt settings under wireless.
Then.....
Pandora or Rhapsody while surfing or kindle reading.
I'm having the same issue with 5.1.1. Can't connect my motorola headset or my wiimote. They pair, but nothing will stay connected. Manually forcing a connect through the menu doesn't seem to do anything.
Likewise, I've got a Motorola H17 that connects fine with my Razr and N1 but woun't connect with my Vegan 5.1.1 with Clemsyn v8. Pairs correctly but no connection.
marcjw said:
Likewise, I've got a Motorola H17 that connects fine with my Razr and N1 but woun't connect with my Vegan 5.1.1 with Clemsyn v8. Pairs correctly but no connection.
Click to expand...
Click to collapse
Replying to own post.
Just found Clemsyn's v9. Same thing. Still no connection.
It seems to be an issue with the tablet using VEGAn 5xx because I have that problem too yet no one had a solution so far, or at least no one posted a solution.
I have a Jawbone and my computer and both are paired but not connected. I did connect the Jawbone to my phone so the problem is not with the Jawbone but with the tablet.
Same issue here. I have tried quite a few different bluetooth devices with the same outcome. Can pair (or so it says) but unable to connect. No options found to force it.
Vegan 5.1 here also no bluetooth. Getting "Paired but not connected"
Anyone have a work around for this? Would love to ditch my USB cable to transfer files
SoCal2 said:
Vegan 5.1 here also no bluetooth. Getting "Paired but not connected"
Anyone have a work around for this? Would love to ditch my USB cable to transfer files
Click to expand...
Click to collapse
You can transfer files wirelessly using an app called file expert. It creates a web site or ftp site with your wifi connection. It is not a fix but at least a work around.
Sent from my hacked Vibrant
Same here, I have a plantronics bluetooth headset that is "connected" but no sound, and make the tablet no sound also, have to reboot to get sound work again.
headset
Motorola s10 HD works fine withvvegan 5.1.1
Related
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
I had an OnCourse BT-339 hanging around in the house. I used it for my Dell Axim 51v. So I thought I would give it a try connecting to my gtab. I have read many posts about connection issue but can't find one specific to my issue. I cannot get the gtab bluetooth to pair with the gps. I tried my bluetooth headset and that connected fine. Is my gps unit outdated or am I doing something wrong.
I just paired my OnCourse BT-339 with my Nook Color running CM7 RC4 so it should work for you as well. I had to download an app from the marketplace called "Bluetooth GPS". Just download the app and launch. If no devices are paired it will take you to the pairing screen, this time it should pair (I too could not pair before downloading this app even though I could see the BT-339 in the list of BT devices). Once paired, it should show the BT-339 in a pull-down list. Just hit connect and it should connect.
Hope it works.
I want to use the app Bluetooth GPS to connect my Nexus One running CM7 to my Gtab running TnT Lite 4.4 for navigation fun. Both devices will pair with each other but when I click gtab in my N1's BT settings nothing happens. For all my other devices the N1 starts connecting w/ no problem.
If I click my N1 in my gtab's BT settings it only asks if I want to unpair. For my other device on my gtab it will also start connecting no problem.
So I am confused as to why the 2 remained paired but won't connect. Is it because Android sees both devices as "phones?"
In the app's reviews someone named "Art" said Bluetooth GPS was the only app that connected his gtab and phone.
Thank in advance for the help!
Dave
So my Jawbone Prime was connecting fine before I updated to ICS LPQ (was on GB LA4 before) and now it doesn't even show up on the devices list even when I try to re-pair or reset the headset.
I tried 2 different sets to no avail.
Anyone know of a solution?
Connects to A2DP BT Headset (Motorola) but only allows media audio to connect. Phone audio doesnt stick.
ICS has some compatibility issues with certain bluetooth devices.
GB my phone always paired with my car stereo and streamed music without any issues.
So far every ICS release, even official, has caused my phone to reboot after streaming music over BT for 10+ minutes.
Its pretty sad they dropped the ball here. GB worked fine, and they borked it.
Well I can connect my BT keyboard fine. I just tried my Motorola BT earphones which are A2DP and it connects but won't allow phone audio to go through the BT earphones. However Media does go through. At least it detects it.
It doesn't detect it at all on the Jawbone Prime (which is not A2DP).
Update:
I managed to connect my jawbone and actually have 2 phone calls on it. After that I had the phone in my pocket and when I checked maybe 15mins later it had frozen and I had to keep power pressed to shutdown/reboot.
It kind of matches Chakker3D's pattern of working then not working. It's like there's a memory leak in the bluetooth stack? maybe I'm just spitballing here.
What I know is that in GB whenever I deactivated BT it took a good 20-25secs. In ICS it's instant to turn off or on. In GB however there was 0 issues.
I just really hope Samsung addresses it. Or if we are lucky, a dev will rework a rom so this problem is gone.
But from what I can tell, very few are having this problem.
Airbag888 said:
So my Jawbone Prime was connecting fine before I updated to ICS LPQ (was on GB LA4 before) and now it doesn't even show up on the devices list even when I try to re-pair or reset the headset.
I tried 2 different sets to no avail.
Anyone know of a solution?
Connects to A2DP BT Headset (Motorola) but only allows media audio to connect. Phone audio doesnt stick.
Click to expand...
Click to collapse
Sometimes is helps when you change kernel. Give a try
078gregory said:
Sometimes is helps when you change kernel. Give a try
Click to expand...
Click to collapse
Another update:
Without any intervention on my part other than keeping on trying it finally discovered my BT headpiece. In fact it discovered both.
Now it's still not 100% perfect because it discovers it, connects and immediately disconnects. If I press a button on the headpiece while it connects then it stays connected and it hasn't restarted/locked the phone yet. I even connected my 2nd headset (another Prime) and it worked.
Keeping fingers crossed. Now I need to see what happens when I walk out of range and back in range.
Hi all. Has anyone tried to pair with a car?
I'm trying to pair with a Kia Sorento. It's looks like it pairs OK and then shows connected but the car doesn't acknowledge that it is connected.
I'll continue to test but wanted to know if anyone else had success. I'll try with other bluetooth devices as well. Please post your experiences with Bluetooth.
Thanks for the ROM update and thanks for your responses.
Well, I've successfully paired and used several different bluetooth devices. Didn't think I had this many:
- bluetooth mouse
- bluetooth keyboard with built-in trackpad
- OBD II reader
- Music headset
I have a phone headset and my car. It looks like both of these pair but don't connect properly. The headset is for phone profile only. After pairing, clicking on it does nothing. Doesn't even try to pair. For my car, it pairs and I'm able to enter the pass-phrase/key but then it doesn't connect.
It looks like there is an issue connecting to devices that use the phone profile. When looking at the settings for the paired items, there is a profile for phone audio. It has a checkbox which is not checked and is disabled...cannot check it.
I'll post screen captures when I get a chance.
Thank you
It looks like the HFP (hands free protocol) is needed for using a headset on a mobile phone as in the case of a earpiece or to use a car as a hands free for a mobile phone as well.
It looks like Blues does not support HFP. There is mention of an oFono project that works with Blues to support HFP but no mention of Android support. I also found some mention of Blues adding that support. Maybe it's available and needs to be configured. Didn't dig too far into it and I'm not that familiar with these technologies.
Hopefully, one of the devs can follow up on this or another group has done it or figured out how to do it.
I'll keep looking and will post if/when I find anything.
FYI, Bluez just released a new version April 12th.
I found some configuration files in /system/etc/Bluetooth
The audio.conf file has several settings referring to headset and hfp. I tried some variations but no luck. Good news is that it looks like Bluez supports headset and hfp out of the box/built-in.
More testing needed.
I also read that after changing settings you will have to unpair and repair your device to pick up the change.
I wonder what the stock files have?
It looks like, ideally, there are other profiles that should be there to have a good experience. PBAP, phone book access protocol, is needed for transferring contacts, for example.
it fix on next release, but have reboot afte call =(
zyr3x said:
it fix on next release, but have reboot afte call =(
Click to expand...
Click to collapse
So my reboot after a call is related to bluetooth headset. Right?
Any ideas about overcoming this?