Flashing New Rom With Odex UVJL4 Voodoo Froyo Rom Help - Vibrant Q&A, Help & Troubleshooting

OK, so running Odex UVJL4 Voodoo Froyo Rom and I want to flash a new Rom Axura 2.2.5.9 Rom what is it going to take for me to flash this new Rom?
Do I need to uninstall Voodoo Lag Fix First and if so whats the best way to do that? And after thats done whats next? dont want to run into any issues! But I want that new Axura 2.2.5.9 Rom looks freaking awesome! Thanks for any help!

darkside79 said:
OK, so running Odex UVJL4 Voodoo Froyo Rom and I want to flash a new Rom Axura 2.2.5.9 Rom what is it going to take for me to flash this new Rom?
Do I need to uninstall Voodoo Lag Fix First and if so whats the best way to do that? And after thats done whats next? dont want to run into any issues! But I want that new Axura 2.2.5.9 Rom looks freaking awesome! Thanks for any help!
Click to expand...
Click to collapse
You don't necessarily need to disable voodoo if you go from a ROM with Voodoo 5.x enabled kernel to another ROM that utilizes Voodoo infused kernel. I've done it jumping from nero beta v3 with supercurio's jl4 kernel to nerov2+voodoo jl4 to nerov3+voodoo jl5. However, it is recommended to ODIN back to stock before jumping from ROM to ROM. It is also suggested to disable Voodoo just in case, I am just playing danger ranger

lqaddict said:
You don't necessarily need to disable voodoo if you go from a ROM with Voodoo 5.x enabled kernel to another ROM that utilizes Voodoo infused kernel. I've done it jumping from nero beta v3 with supercurio's jl4 kernel to nerov2+voodoo jl4 to nerov3+voodoo jl5. However, it is recommended to ODIN back to stock before jumping from ROM to ROM. It is also suggested to disable Voodoo just in case, I am just playing danger ranger
Click to expand...
Click to collapse
can I just disable voodoo then Flash the AXURA Vibrant Edition 2.2.5.9 Beast Rom
using Rom Manager.without to many problems? its a real pain odin back to stock!
thanks for any tips and help!

darkside79 said:
can I just disable voodoo then Flash the AXURA Vibrant Edition 2.2.5.9 Beast Rom
using Rom Manager.without to many problems? its a real pain odin back to stock!
thanks for any tips and help!
Click to expand...
Click to collapse
You can do that as well
EDIT: just remember to boot into CWR via the power menu and not from the ROM Manager

installed fine! its freaking awesome. lighting fast and no lag!

Related

best lag fix for ji5

Voodoo was awesome but removing it resulted in a soft bricked galaxy s. Not voodoos fault. I am the end user after all. In any event, i wanted to know which lag fix was a bit more user friendly and compatible with ji5. I heard there's an app u can download that can give u a lag fix, what do u vets think of it.
Its my 3rd day with my galaxy s and im glad i didn't wait for the g2. Loving dlna and this awesome gpu! Thanks to all in the community, its only been 3 days and i already bricked 4 times. But now i know how to unbrick and help out my fellow vibrant owners
Also, anyone know a kernel compatible with ji5? Everytime i try and install kingxklicks it results in a soft brick.
none of the current custom kernels will support JIx revisions of the firmware...
masterotaku said:
none of the current custom kernels will support JIx revisions of the firmware...
Click to expand...
Click to collapse
What he said. If you want fast / stable then get a REAL ROM like Bionix or any of Eugene's and do Voodoo. One-Click Lag Fix is ****.
gravis86 said:
What he said. If you want fast / stable then get a REAL ROM like Bionix or any of Eugene's and do Voodoo. One-Click Lag Fix is ****.
Click to expand...
Click to collapse
Havnt tried bionix but i liked eugenes. I removed eugenes because i actually enjoy the stock music player... how close is bionix to stock?
The Bionix changelog doesn't say anything about having removed the stock music app so it's probably still there. I haven't tried it yet so I don't really know for sure though.
You may also want to stay stock if it's what works for you. I'm on stock but am running JAC's ExtremeMod Voodoo kernel and I'm completely satisfied.
Ji5 w/ jac kernel rom uploaded, check it out.
http://forum.xda-developers.com/showthread.php?t=796437
sheek360 said:
Havnt tried bionix but i liked eugenes. I removed eugenes because i actually enjoy the stock music player... how close is bionix to stock?
Click to expand...
Click to collapse
what do you meany by stock aosp music or samsung music. you can all ways push the music app of your choice
b0ricuaguerrero said:
what do you meany by stock aosp music or samsung music. you can all ways push the music app of your choice
Click to expand...
Click to collapse
^ use Root Explorer or ADB
Voodoo is working great on Eugenes JI5 with JAC kernel. Just flash the voodoo kernel after the rom.

can i?

is it possible to have vibrant9 running with JAC's voodoo lagfix+OC and also have OCLF on it too?
sk8rboikelley said:
is it possible to have vibrant9 running with JAC's voodoo lagfix+OC and also have OCLF on it too?
Click to expand...
Click to collapse
Why would you want to have so many Lag fixes in first place?
Anywayz, to answer your question. there is nothing preventing you from running multiple LF's on your phone. Just be mindful on what you are doing with your phone and make a nandroid before you do all the LF's
I'm calling a To-Fu'd phone soon...
Just flash a froyo rom and leave the lag-fixes alone!

[Q] Enabling voodoo after ROM setup

Ive been using Nero v3 for a little while, and Im interested in trying voodoo. Since flashing, Ive installed a few tweaks (some updated apps from SGS tools), and a theme (SGB 2.2.2).
I know its damn near impossible to perma-brick this phone, but is it safe to enable voodoo now that Ive tweaked the rom a bit?
You should have no problems. I've done it a few times on nero v3.
Thanks, Ill be giving it a try later tonight, but Im debating on waiting til the new SBG comes out...
I've made a LOT of changes and voodoo + nero v3 play very well together.
Remember, its a stock kernel so it really is very safe. Just recall to disable before flashing anything unless it too is voodoo'd. ha
Took the plunge, thanks for easing my fear of possible dragons hah
Can you elaborate on what you can flash when voodoo is enabled?
Sdobron said:
Can you elaborate on what you can flash when voodoo is enabled?
Click to expand...
Click to collapse
Basically anything but a rom or kernel that doesn't support ext4 FS is safe. In other words, almost anything since most rom developers are packaging voodoo kernels now
So if nero v4 came out with the voodoo kernel I could flash the package and not have to convert to rfs and back to ext4?
^ yes, unless sombionix states otherwise.

Flashing Trigger 2.8.1 from Axura 2.3.1

Hi guys. I have a Vibrant with Axura 2.3.1 currently installed and I want to go to Trigger 2.8.1. Are the Axura and Trigger voodoo kernels compatible where I can just flash over Axura without disabling voodoo first or should I be Odin-ing back to stock first and then flash Trigger.
jockeyhollowjohn said:
Hi guys. I have a Vibrant with Axura 2.3.1 currently installed and I want to go to Trigger 2.8.1. Are the Axura and Trigger voodoo kernels compatible where I can just flash over Axura without disabling voodoo first or should I be Odin-ing back to stock first and then flash Trigger.
Click to expand...
Click to collapse
My understanding is that if you are going from one to another you do not have to disable it.
jockeyhollowjohn said:
Hi guys. I have a Vibrant with Axura 2.3.1 currently installed and I want to go to Trigger 2.8.1. Are the Axura and Trigger voodoo kernels compatible where I can just flash over Axura without disabling voodoo first or should I be Odin-ing back to stock first and then flash Trigger.[/QUOTE
you will be fine just flashing. just remember to make a nandroid backup of your rom first
Click to expand...
Click to collapse
Thus is covered in the noob guide. If going from voodoo to another voodoo enabled rom, you are good. Check out the install instructions to try and avoid any bugs. I just updated the noob guide.

[Q] Going from Comm Rom to TSM Resurrection?

Want to upgrade from Comm rom 2.1 with the voodoo kernel it came with, probably to the recent TSM Resurrection 1.0. Looks like there's another compatible voodoo kernel out, can I flash that first, and then the new rom? Or do I need to undo voodoo and go back to stock, starting from there? Not sure what radio I'm on, baseband says EB01.
Sorry if these questions suck, I haven't upgraded for months. Looking for opinions on best order of operations here is all! Thanks everyone.
kleffman said:
Want to upgrade from Comm rom 2.1 with the voodoo kernel it came with, probably to the recent TSM Resurrection 1.0. Looks like there's another compatible voodoo kernel out, can I flash that first, and then the new rom? Or do I need to undo voodoo and go back to stock, starting from there? Not sure what radio I'm on, baseband says EB01.
Sorry if these questions suck, I haven't upgraded for months. Looking for opinions on best order of operations here is all! Thanks everyone.
Click to expand...
Click to collapse
Odin PWGB 2. 0 which is a complete tar package. Then flash tsm res in Cwm. Then you can choose your kernel and lag fix settings
TSM Resurrection 1.0,TKSGB10-18,XIX,ec09 radio.
This is a question. Questions go in the ......question and answer forum.
To answer your question, these are all bml roms. Assuming that you have an ec09 or later radio you should be able to flash it after wiping data unless the Op of the new rom says that it requires the gingerbread bootloaders.
Sent from my HP Touchpad using xda premium
Damn, figured I would do something wrong, maybe a mod can move this.
Thanks for the tips guys.
laureanop said:
Odin PWGB 2. 0 which is a complete tar package. Then flash tsm res in Cwm. Then you can choose your kernel and lag fix settings
TSM Resurrection 1.0,TKSGB10-18,XIX,ec09 radio.
Click to expand...
Click to collapse
In case it helps anyone, this worked perfectly. I have so far kept the kernel that comes with PWGB2.0 to see how it is, but I miss the BLN tools and voodoo sound.
kleffman said:
In case it helps anyone, this worked perfectly. I have so far kept the kernel that comes with PWGB2.0 to see how it is, but I miss the BLN tools and voodoo sound.
Click to expand...
Click to collapse
Upgrade your kernel to TKSGB 1006(better stability than newer version)and you can get Bln and voodoo sound back
TSM Resurrection 1.0,TKSGB10-06, XIX,ec09 radio.

Categories

Resources