Related
Any info how to make the default froyo lockscreen in portrait ?pls advice
I had to buy WidgetLocker
Lock 2.0 will also force lockscreen to portrait.
Full version
Demo version
LockBot also uses portrait.
Free version
Paid version
I played a bit with LockBot free and it works better if you use something like NoLock to turn off the phone's built-in lockscreen. I'm not using a security lock.
I like LockBot better from the few minutes I tried them out.
Edit: the free version of LockBot has no ads and has three lockscreens you can choose from. It also allows unlocking form the menu button. See attached images for Lockbot free lockscreens.
To choose a theme in the free version open Lockbot from the app tray. Tap My themes. Then hit the menu key and then playlist. In the free version you can pick from the three themes pictured in the attachments. The ones you select will rotate. Select only one if you want the same lockscreen each time.
How do u get lock 2.0 to so lock screen in full mode?
Sent from my Dell Streak using XDA App
I use Lockbot and no lock.Love it.
Thanks marvin
freakmax said:
I use Lockbot and no lock.Love it.
Thanks marvin
Click to expand...
Click to collapse
That's my current setup. I changed the backgrounds for the lockscreens to pics of my 3 year old grand kids.
LockBot works with the PowerAmp lockscreen widget, except with the direct unlock setting in PowerAmp. So when I am running PowerAmp I have to unlock twice, which is how I had it setup with the stock lockscreen.
I have widgetlocker, but it irritates me how the first time I try to wake my phone up, the stock lock screen is there and the phone immediately shuts back off. I'll try nolock when I get home, thanks for the info!
Edit: Worked like a charm.
cbass said:
I have widgetlocker, but it irritates me how the first time I try to wake my phone up, the stock lock screen is there and the phone immediately shuts back off. I'll try nolock when I get home, thanks for the info!
Edit: Worked like a charm.
Click to expand...
Click to collapse
do you guys have widgetlocker force closes like me , It never worked , as soon as I click to start the app , a message says that it force close . any help buddies
maan1976 said:
do you guys have widgetlocker force closes like me , It never worked , as soon as I click to start the app , a message says that it force close . any help buddies
Click to expand...
Click to collapse
I have the same problem. I am on Steve's 1.7 rom
Sent from my Dell Streak using Tapatalk
Hi,
Widget Locker is really good however the Home Screen bypasses the security. Howevr you must use the inbuilt lock for it to work. But note, if you have a widgetlocker background for example black then when you go to unlock it you will see your homescreen background which doesnt really fit in? if you know what i mean?
LockBot Pro was really good and my preferred choice however that too bypass security. Even though it has its own Inbuilt Lock. Pressing the Home gets rid of it...apparently it say's its fixed but you can still press the Home and you're in....
---
I downloaded Lock 2.0 which has a inbuilt Lock 4 Digit Pass. Which is what I want however I can't move the slider down. ?? the background pictures shows correctly but then the slider is like half way down the screen.. does anyone have a idea how this works??
Thanks
I didn't like NoLock because the volume and camera keys bring the phone back to life.
I found Screen Mode Widget Lite overcame that problem.
cbass said:
I have widgetlocker, but it irritates me how the first time I try to wake my phone up, the stock lock screen is there and the phone immediately shuts back off. I'll try nolock when I get home, thanks for the info!
Edit: Worked like a charm.
Click to expand...
Click to collapse
never faced an issues with widgetlocker
hi guys, I'm using samsung galaxy s2 with Widgetlocker for screen locking, but everytime i reboot my phone, widgetlock requires me to unlock twice to see the home screen, i found once i reboot to the lock screen, the first time unlock screen is in tool mode(with menu button activate), then i unlock this screen, the second time unlock screen is the real unlock screen(with no button activate). i want 2 skip the first tool mode screen once i reboot, anyone can tell me how 2 do that?
I'm using WidgetLocker too, you can select the option to override the default Samsung lock at boot, however, you will still see the default Samsung lock for a few seconds when rebooting the phone, but it will go away pretty fast and WidgetLocker will replace it.
Sp1tfire said:
I'm using WidgetLocker too, you can select the option to override the default Samsung lock at boot, however, you will still see the default Samsung lock for a few seconds when rebooting the phone, but it will go away pretty fast and WidgetLocker will replace it.
Click to expand...
Click to collapse
yup, i see it too, but the problem is after it overrides the default lock screen, i have to unlock twice to get to the home screen. btw, i'm using go launcher, i tried using ADWlauncher and LauncherPro, no this problem, it may caused by the launcher...
I'm using Easy-wake mode in WidgetLocker which disables default lockscreen. If you don't wanna use that just go to WidgetLocker's advanced settings and disable stock lockscreen, first option from the top
I'm getting the same problem easy wake mode doesn't help - you reboot the phone, it goes straight to widget locker as normal, then u unlock and it drops into tool mode, then u unlock from tool mode, to get to the launcher. However I have noticed that once you get to the launcher nothing displays - oh and something else, when you get to the tool mode it is only then the app requests superuser permission. Very strange.
I'm using Go Launcher Ex as well....
And something else I've noticed that after all this happens, when you deliberately go into tool mode, the menu button no longer works so I now can't get to the settings to submit a bug report
Infact I've had to uninstall and go back to the main lock screen for now until this is fixed...
I have no problem with WidgetLocker, but i gotta agree there are so many settings in it and if you don't choose them correctly WidgetLocker doesn't work the way you want. Even though i can understand English pretty well, i'm having troubles figuring out which option does what
I recommend you go in settings > manage app, delete all the widget locker data, delete widget locker, then reinstall.
With default settings, and my screen lock deactivated in settings, it behaves as expected.
cigaro78 said:
I recommend you go in settings > manage app, delete all the widget locker data, delete widget locker, then reinstall.
With default settings, and my screen lock deactivated in settings, it behaves as expected.
Click to expand...
Click to collapse
Did all that, it still doesn't work correctly..
icehot666 said:
Did all that, it still doesn't work correctly..
Click to expand...
Click to collapse
Are you rooted?
hi, how to set WidgetLocker as default?
when i press the power button, i always need to unlock for 2 times. 1 time for widgetlocker, and 1 time is default screen lock..
Having the exact same issue. I am also using GoLauncher, so maybe there's the problem??
It is very frustrating as I really like this lock screen replacement.
apprentice said:
Having the exact same issue. I am also using GoLauncher, so maybe there's the problem??
It is very frustrating as I really like this lock screen replacement.
Click to expand...
Click to collapse
Same here using Go Launcher that's why i use Go Lock screen now pretty slick with Sense theme even though less tweakable...
Try WL Beta 2.2.2+
Using WL 2.2.1 on rooted SG2 never had this issues so far on any firmware. At moment Im on kj3 Dutch. Search in XDA there is a beta WL came out last week or so you may want to try this.
Running Go launcher and locker on my SGS2 running VillianRom 3. I have a pattern lock enabled too.
Oddly what I turn on the phone instead of sliding to unlock and enter my unlock pattern if I press the home button the phone goes to the home page and bypasses the pattern lock security.
DOes anyone else get this at all with Go launcher and Locker?
Home button?
Patten doesn't even apply...
It just normally unlocks without patten and i had even setted it two times
I use MiLocker more Lockscreens and home button fix... It works and look beautifully. GoLauncher look nice too but not so good theme
Sent from my GT-I9100 using xda premium
Battletux said:
DOes anyone else get this at all with Go launcher and Locker?
Click to expand...
Click to collapse
Yes. I get this too, on stock ROM. I think, home button is closing the application, since Go Locker is an application.
Just disable the home button to see if that fixes it
Try setting Go Locker as your default launcher rather than Go Launcher.
There is a home button fix in go locker settings. However you have to keep redoing it when the theme gets an update.
Sent from my GT-I9100 using XDA App
Hi,
I seem to have this annoying problem. Lets say I am reading an article in some app. Now my phone goes on standby after 1 minute of inactivity. In ICS, I could press the home button and get back to the app I was on. In JB pressing the home button closes the app and brings me back to home screen. Is there a way to disable that?
Yes there is. Go to settings, than developer settings, scroll down to bottom and uncheck "Destroy any activity soon as user leaves is"
Also, check background process limit. If it is set to 0 then select "Standard Limit"
Sent from my GT-I9300 using xda app-developers app
Fycola123 said:
Yes there is. Go to settings, than developer settings, scroll down to bottom and uncheck "Destroy any activity soon as user leaves is"
Also, check background process limit. If it is set to 0 then select "Standard Limit"
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
My developer options were off. And none of that was checked anyways. The annoyance started when I updated to JB.
Than really i cant help you, because i dont have that problem. I also have jelly bean installed.
Sent from my GT-I9300 using xda app-developers app
Fycola123 said:
Than really i cant help you, because i dont have that problem. I also have jelly bean installed.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Oh well thanks. Hopefully someone can figure out a way to solve this problem.
Have exactly the same problem. Before Jelly Bean this didn't happen.
I guess I'll just have to get used to waking it up with the power button instead until there's a fix.
Btw I'm running stock 4.1.1.
Sent from my GT-I9300 using xda developers app
circuit89 said:
Hi,
I seem to have this annoying problem. Lets say I am reading an article in some app. Now my phone goes on standby after 1 minute of inactivity. In ICS, I could press the home button and get back to the app I was on. In JB pressing the home button closes the app and brings me back to home screen. Is there a way to disable that?
Click to expand...
Click to collapse
The problem is that the lock screen has not yet activated, therefore commands are passed to the current app running. You need to use the power button to turn on the screen. Else, search thru the settings for where to change the lock screen to lock immediately the screen the screen goes off. This might help.
HTH
guhvanoh said:
The problem is that the lock screen has not yet activated, therefore commands are passed to the current app running. You need to use the power button to turn on the screen. Else, search thru the settings for where to change the lock screen to lock immediately the screen the screen goes off. This might help.
HTH
Click to expand...
Click to collapse
yes it helps.you must set the lock screen and it works.but is there any way without look screen to ?
This problem seems to be affecting those who turned off S-Voice
Just go into its setting and enable it to activate via double pressing home button. The problem then goes away in JB.
yes it works ! i have only installed s-voice apk and thats it !
Hey guys. I don't know whether anyone knows or cares but I found a guide somewhere on the internet on how you can use the double tap the screen to turn the screen off while using Nova Launcher.
1. Download the app Screen Off and Lock by katecca.
2. In Nova Launcher go to Gestures & Input.
3. Under Gestures select double tap and then use the option to select an app.
4. Select Screen Off and Lock.
5. Tap the sheet out an empty space on your Nova desktop
What I Do is use the shortcut for hibernate and screen off on double tap with greenify
Double tap on status bar will screen off, either with Nova nor stock launcher...
I use Chronus time / weather widget and have the single-tap on the weather icons to launch "Greenify Hibernate + Lock".
Works really well - didn't even know about the Greenify apps until I read the post from @wadamean above.
dd66 said:
Double tap on status bar will screen off, either with Nova nor stock launcher...
Click to expand...
Click to collapse
Damn, I didn't know that! Had I known that I wouldn't of bothered with d/l a 3rd party app
Or you can set Greenify to turn off the display by swiping up from the bottom (instead of launching Google Search). That's what I do.
From a battery saving stand point, there is a view that you don't want to hibernate apps that you are frequently using in the day. Using the greenify lock and hibernate will reduce battery life compared to just locking the phone
rav101 said:
From a battery saving stand point, there is a view that you don't want to hibernate apps that you are frequently using in the day. Using the greenify lock and hibernate will reduce battery life compared to just locking the phone
Click to expand...
Click to collapse
Interesting. I hadn't really noticed a difference myself. Granted, I forget to lock it that way half the time, and end up just double tapping the status bar, lol.
GibMcFragger said:
Interesting. I hadn't really noticed a difference myself. Granted, I forget to lock it that way half the time, and end up just double tapping the status bar, lol.
Click to expand...
Click to collapse
none of these respect smartlock however.
i did find a method that does, but requires tasker and root. (unless anyone knows another way to accomplish this.)
create a task with action "code > run shell"
command: "input keyevent 26"
use root: yes
this simulates pressing the power button, respects smartlock, and can be set as shortcut through nova or anywhere else.
vonlupe said:
none of these respect smartlock however.
i did find a method that does, but requires tasker and root. (unless anyone knows another way to accomplish this.)
create a task with action "code > run shell"
command: "input keyevent 26"
use root: yes
this simulates pressing the power button, respects smartlock, and can be set as shortcut through nova or anywhere else.
Click to expand...
Click to collapse
you can call system lock in tasker without a root, just declare it as device admin is ok, same action like you press power button and turn off the screen
Or just install Screen Off app from the Playstore, and press the button...
DoKaTSuYa said:
Or just install Screen Off app from the Playstore, and press the button...
Click to expand...
Click to collapse
Or simply *read* the first post.
wadamean said:
What I Do is use the shortcut for hibernate and screen off on double tap with greenify
Click to expand...
Click to collapse
+1. Did this with Apex launcher too.
Nova Launcher has action Lock screen.