In this video i show you how to jailbreak and sideload apps to your windows phone 7 device. This procedure should work on any WP7 device and not just the HD2
Before Doing Anything You Need To Install The WP7 SDK So That Your Computer Can Connect To Your Device
WP7 SDK
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=04704acf-a63a-4f97-952c-8b51b34b00ce
MIRROR
http://www.mediafire.com/?uigu7rne74nn6vp
ZUNE SOFTWARE
http://www.mediafire.com/?pesqg3asdoghea3
WP7 Unlock Tools
http://www.mediafire.com/?r3cx4mfeecuieo0
How To Install WP7 (Windows Phone 7) On Your HTC HD2
http://www.youtube.com/watch?v=Nac3Fnf-lY4
Wow! If this works (it looks like it does), then we can truely do anything! Haha!!
Thanks a lot! I will trying this later then.
well, it doesn't work for me. everythings ok until i try to install some .xap i get error in translation it goes moreless:
set or file cannot be loaded.
'Microsoft.SmartDevice.Connectivity, Version=10.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its relations. file cannot be found.
Click to expand...
Click to collapse
any ideas?
Maybe try to install WP7 SDK.
the video tut worked for me just fine. i was able to install twitter, facebook, and the flashlight app that was included perfectly. great tut!
i did everything exactly but the chevronWP7 gives me a message
"please make sure its connected using usb ....
please start the Zune application..
any help ??
i keep getting an error wen i try to install the exe vm_web says "visual studio cannot run in compatibility mode. for more info see the installing section visual studio readme at http://go.microsoft/fwlink/?linkid+1143397" ??????
after installing sdk i get message:
-Please make sure your phone is unlocked!
-Please make sure you connected your device to PC and Zune launched
Try again?
Click to expand...
Click to collapse
4801223762 said:
i keep getting an error wen i try to install the exe vm_web says "visual studio cannot run in compatibility mode. for more info see the installing section visual studio readme at http://go.microsoft/fwlink/?linkid+1143397" ??????
Click to expand...
Click to collapse
Had the same issue as you please install the RTW version of the tools at
or this
i can't seem to install games from the market by this method.
It also gives me the error:
-Please make sure your phone is unlocked!
-Please make sure you connected your device to PC and Zune launched
Try again?
I can install twitter, facebook and flashlight app though..
If you are getting the error message;
please make sure its connected using usb ....
please start the Zune application..
its because you need to download and install WP7 SDK before it will recognise your phone.
If you already installed SDK then close Skype( on your PC ).. for some reason you get connection error if skype is open
If you are getting the error message;
please make sure its connected using usb ....
please start the Zune application..
And you have installed WP7 SDK.
Try to shutdown your firewall. Im on windows 7 64bit and i can confirm that this did the job!
con103 said:
i did everything exactly but the chevronWP7 gives me a message
"please make sure its connected using usb ....
please start the Zune application..
any help ??
Click to expand...
Click to collapse
Okay, I spents DAYS doing all of the steps. There is a fix! Set the date on your PC to 1 October 2011 and also on the cell. Then use the chevron.exe. It should work.
RayHeath said:
Okay, I spents DAYS doing all of the steps. There is a fix! Set the date on your PC to 1 October 2011 and also on the cell. Then use the chevron.exe. It should work.
Click to expand...
Click to collapse
LOL! We can have million of fixes but the final fix is one! Devs should create a built of WP7 unlocked and activated...So give them some time and they will make this happen like the rest they have done!
arkatis said:
LOL! We can have million of fixes but the final fix is one! Devs should create a built of WP7 unlocked and activated...So give them some time and they will make this happen like the rest they have done!
Click to expand...
Click to collapse
Arkatis, This really works. Nothing worked for me before. But when I changed the date, then of course in airplane mode, it worked.
RayHeath said:
Okay, I spents DAYS doing all of the steps. There is a fix! Set the date on your PC to 1 October 2011 and also on the cell. Then use the chevron.exe. It should work.
Click to expand...
Click to collapse
Tried many things .. this really worked.. i kept same timezones on both pc and mobile.. date to october 1 2011 on both.. voila it got unlocked... weird but worked.. thanks..
finaly did it thank you all
depakjan said:
Tried many things .. this really worked.. i kept same timezones on both pc and mobile.. date to october 1 2011 on both.. voila it got unlocked... weird but worked.. thanks..
Click to expand...
Click to collapse
Glad it helped!
well it did not worked for me. i have no idea why. i keep getting the same error...
Related
jump here: http://forum.xda-developers.com/showthread.php?t=347451
How to build your own rom: first download the kitchen, then replace the boot.rgu in XIP folder with the one abusalza attached in his thread. Then put the diskimage.nb0 in to rom folder (you can use jiggs'). Then double click dumpFiles.cmd, wait.....-> there will be 2 folder OEM&SYS created. Change things in those two, when finished-> double click BuildOS.cmd-> start-> wait........->close buidOS->wait the cmd window finishes, there'll be a diskimage created in Flash foder, copy and overwrite it to folder "ATOMWM607WWE6PP". And voila: you've got new rom
Okay, i'm trying to download it, would you upload to somewhere else else? mediafire seems have some trouble with my internet connection,. would you tell us more detail about, step by step installation, major and minor bugs, etc?what about you? have you tried your own ROM? does it works perfectly?
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
^^Downloading , will upload soon in about 30 - 45 minutes
Here's the link CLICK ME
medkid said:
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
Click to expand...
Click to collapse
do we need to enter to bootloader mode??
is it safe upgrading without entering to bootloader mode??
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
udayrulz said:
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
Click to expand...
Click to collapse
have you flash your atom with this rom?
how is it? succesfull?
is it faster mate?
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
udayrulz said:
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
Click to expand...
Click to collapse
thanks mate, i'll borrow my friend computer which use a faster broadband connection, might this help me to download the file,.
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
http://rapidshare.com/files/67638815/ATOMWM607WWE6PP.rar
udayrulz said:
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
Click to expand...
Click to collapse
great,. thanks uday,.
waiting for the link then,.
^^Link added to previous post
nice, its downloaded,.
well,. so many files,.
its a ROM Upgrade i've never done before,.
okay will try it,.
- Extract
- Connect Device by entering bootloader mode
- Run Software Update Utility
- Wait
was that right????
^^yes^^ , i am flashing it too now
Just finished with it , works fine
CONFIRMED!!
will write a short review soon
@medkid
Mate how am i suppose to run the flash plugin included , do i need to install the VLC player too coz i see you have included the plugin in the rom.
If i try to watch youtube video without installing the VLC player it gives me an error .
Am i doing something wrong??
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
I've included Flashvideobundle.cab in extended rom, if u installed it, you can go to start menu\programs\internet, you will see an IE shorcut right there.
But, you have to install TCPMP 0.72 to play FLV files directly from those sites
Garmin said:
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
Click to expand...
Click to collapse
that's your battery level, you will see it moving when it's charging
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
udayrulz said:
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
Click to expand...
Click to collapse
he he, thank you, but don't be so fast mate , I've built another rom when you upload it
hey,everything was fine b4 5days but now strange happen .my phone not connecting to active sync.even internet sharing and usb to pc is not working now.i tried to reinstall but in vain..even after reinstall the window xp it doesn't help......on bootloader no'usb'icon seen..plz help
saurabh88 said:
hey,everything was fine b4 5days but now strange happen .my phone not connecting to active sync.even internet sharing and usb to pc is not working now.i tried to reinstall but in vain..even after reinstall the window xp it doesn't help......on bootloader no'usb'icon seen..plz help
Click to expand...
Click to collapse
check this
open active sync in ur phone > tap on Menu > connections > and make sure that "synchronize all PC's using this connection" is checked and in drop down list USB is selected
my friend it is already as u have said...but only battery charging is working nothing more.
plz help me...i want to flash rom.....plz help..
take the backup using PIMbackup
stupidgye said:
take the backup using PIMbackup
Click to expand...
Click to collapse
so no one ready to help me?this strange thing that happen me first time that i cant sync my ppc.omly battery charge
u need to get this maybe....
hi
i think u need to install the recent windows mobile device center on ur comp u need to chek at the MS site and u will get this install the same on ur comp and u will be able to sync with ur Phone im not sure but i think u need this to synk WM 6.1 and above ROM im using it and it works ok for me U need to install on ur comp OK
saurabh88 said:
so no one ready to help me?this strange thing that happen me first time that i cant sync my ppc.omly battery charge
Click to expand...
Click to collapse
not still working
plz i have done flashing rom through sd card..vanilla 3.1.1 but still no working active sync
pls read yar
hi
kindly read reply given have u tried to install as i said in post No7 in this thread try doing it then ask for help u dont try any suggestion or if u did u dont mention that u have how can u get help without trying
goodluck
saurabh88 said:
plz i have done flashing rom through sd card..vanilla 3.1.1 but still no working active sync
Click to expand...
Click to collapse
plz clear
haree said:
hi
kindly read reply given have u tried to install as i said in post No7 in this thread try doing it then ask for help u dont try any suggestion or if u did u dont mention that u have how can u get help without trying
goodluck
Click to expand...
Click to collapse
as per your guide i go to the microsoft site but my friend device center is for vista and i m using window xp.....should i try that one plz clear my doubt
1. Uninstall an reinstall the Activesyn, or
2. Cek your usb cable, try to change with another cable.
BesFen said:
1. Uninstall an reinstall the Activesyn, or
2. Cek your usb cable, try to change with another cable.
Click to expand...
Click to collapse
done both but not working bro.only battery charges
re install with the CD
hi
sorry dear if im wrong u will get a CD with ur Phone why not try to re install the same with the CD goodluck
saurabh88 said:
as per your guide i go to the microsoft site but my friend device center is for vista and i m using window xp.....should i try that one plz clear my doubt
Click to expand...
Click to collapse
haree said:
hi
sorry dear if im wrong u will get a CD with ur Phone why not try to re install the same with the CD goodluck
Click to expand...
Click to collapse
my bro i had done today 12.30 pm..but in vain....five days before i gone to surat i had flashed my gene with 6.5 sumit by usb..but after coming to home this thing happened
The same problem as that of the author's themes.
Was unable to overcome: (
so i have to take it to service centre>no other solution plz.....?
I am assuming you are using XP.
1. Right Click My computer->Properties->Hardware->Device Manager, keep it open.
2. Now Connect the Gene, did you see a new device in your list of USB Device / Unknown device ?
3. If yes, remove the Gene from cable, uninstall activesync, restart windows, install active sync. If that doesn't help, then you might have to reinstall windows LOL, but anyway its cheaper than the service centre .
4. If No, then try another system and see if some unknown device pops up in device manager or not.
Hope it helps and keep us posted.
Addicted2xda said:
I am assuming you are using XP.
1. Right Click My computer->Properties->Hardware->Device Manager, keep it open.
2. Now Connect the Gene, did you see a new device in your list of USB Device / Unknown device ?
3. If yes, remove the Gene from cable, uninstall activesync, restart windows, install active sync. If that doesn't help, then you might have to reinstall windows LOL, but anyway its cheaper than the service centre .
4. If No, then try another system and see if some unknown device pops up in device manager or not.
Hope it helps and keep us posted.
Click to expand...
Click to collapse
yeepy happy days.ot working now..
saurabh88 said:
yeepy happy days.ot working now..
Click to expand...
Click to collapse
How ? . Do let us know
Addicted2xda said:
How ? . Do let us know
Click to expand...
Click to collapse
i dont know exactly...but i changed cable of my friend and now its work fine.....
hello, greetings to all, I have a X10i, and it will install universalroot change the original numbering system for the Norse to upgrade to 2.1 when the numbers change and reset the phone tells me it should be closed forcibly Timescape, I try to upgrade to 2.1 pc companion error and tells me never recognizes the phone, and SEUS says I have the latest software, trarto of restauralor from the phone and I get error, open the market and I get error any program I run. restore it to factory settings and I get the same error, I went to the model information and tells me I have the firmware 1.6 but the model number which came out before I get one now X10i unkonwn is as if he had model now tell me I hope your help to do, ah another thing I can not install any program from mobile
When you editted the numbers when you were trying to upgrade you didn't enter the right numbers or you changed something else which you weren't meant to.
There is some amounst the may threads a solution to this which bin4ary made. I'll see if I can find it and point you in the right direction....
Sent from my X10i using XDA App
I'm sorry I can't seem to find it. My advice is send bin4ry a PM and hopefully he can find the right info for you.
Sent from my X10i using XDA App
thanks friends
nuncar21 said:
thanks friends
Click to expand...
Click to collapse
No worries. The problem is where some of the threads get so long tryng to find proper news and useful stuff gets mixed in with all the other stuff too.
Sent from my X10i using XDA App
Run this which will update you to 2.1 - http://forum.xda-developers.com/showthread.php?t=825675
XperiaX10iUser said:
Run this which will update you to 2.1 - http://forum.xda-developers.com/showthread.php?t=825675
Click to expand...
Click to collapse
and tell us how you go with it!
hello friends probe through the tutorial and download the program but when I run the program x10flashbat and asks me to connect the phone in flash mode and press any key to continue when I make that step completely closes the program that I can do
nuncar21 said:
hello friends probe through the tutorial and download the program but when I run the program x10flashbat and asks me to connect the phone in flash mode and press any key to continue when I make that step completely closes the program that I can do
Click to expand...
Click to collapse
Reread the guide carefully, and try again.
hello friends I have read all topics and I have tried everything, when I run the regedit in windows and put "Vid_0fce & Pid_adde" I do not see the DeviceInstance try putting "USB \ VID_0FCE & PID_ADDE" and I do not see anything I have Windows 7 32bit everything I've done with the phone plugged into debug mode but nothing that I get something, and when I run the file if you put nothing opens and when I plug in flash that I close the program
You have to have SEUS installed and PC Companion.. run it through PC companion once. Then do the regiedit thing.
To put your phone into flash mode, turn off the phone completely, then hold the back button and connect the phone through USB to the computer.
(when you do this, make sure PC companion is NOT running)
Hey whats up guys everything has been going well using qdl tool . Up until the driver installation
It keeps Saying
Windows found software for your device but encountered a error while attempting to install it and under it . just wanted to know if anyone is having this problem .
Qualcomm Hs- Usb Modem 9002
Running windows7 64 bit . I also followed the 64 bit guide and everything so im not sure why i get this message
I didn't have any problems with it. I followed the 64 bit guide to a T, then I installed the dell drivers before I used the QDL tool. I tried it before I installed the Dell Drivers and all I got was errors. After install of the drivers it went off without a hitch.
Dell Streak 2.2 w/DJ Steve 1.5.3
Moving to Q&A Section
Give this a try.
If you followed the instructions on streakdroid, and still having an issue try this:
Open the CMD window as administrator (shift+ctrl+enter)
then enter: bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS (NOTICE there are 2 "D's" this is not an error, and is what is required for Windows 7)
after successful completion enter: bcdedit.exe -set TESTSIGNING ON (not case sensitive)
after successful completion close the window, and reboot. This should clarify your issue with the driver problem. Windows 7 sometimes has an attitude, this worked for me If not, please let me know.
demonchild1786 said:
Hey whats up guys everything has been going well using qdl tool . Up until the driver installation
It keeps Saying
Windows found software for your device but encountered a error while attempting to install it and under it . just wanted to know if anyone is having this problem .
Qualcomm Hs- Usb Modem 9002
Running windows7 64 bit . I also followed the 64 bit guide and everything so im not sure why i get this message
Click to expand...
Click to collapse
One more thing, make sure the driver you select reads: Qualcomm HS-USB Diagnostic 9002 There is also a non diagnostic version that will cause errors as well.
Srry about that still tring to figure this forum stuff out, please excuse my noobish behvaior
ARHMogul said:
If you followed the instructions on streakdroid, and still having an issue try this:
Open the CMD window as administrator (shift+ctrl+enter)
then enter: bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS (NOTICE there are 2 "D's" this is not an error, and is what is required for Windows 7)
after successful completion enter: bcdedit.exe -set TESTSIGNING ON (not case sensitive)
after successful completion close the window, and reboot. This should clarify your issue with the driver problem. Windows 7 sometimes has an attitude, this worked for me If not, please let me know.
Click to expand...
Click to collapse
Yeah it worked really well actually Thanks a million . No im stuck trying to qdl to recongize its there. Im trying all the usb ports and it keeps saying no "connection"
demonchild1786 said:
Yeah it worked really well actually Thanks a million . No im stuck trying to qdl to recongize its there. Im trying all the usb ports and it keeps saying no "connection"
Click to expand...
Click to collapse
just to verify: are you removing the battery from your device, waiting one min, opening up QDL Tool, pres and hold the volume up button and plugging in your device in. Then it should find your device.
If thats what you are doing then I dont know what else to tell you well.... other than good luck!
You were right i didnt pay attention to actually selection Qualcomm HS-USB Diagnostic 9002. i firsty selected Just 9002. By the way the froyo i have is pre release right ? So its my best interest to update with dell right?
demonchild1786 said:
You were right i didnt pay attention to actually selection Qualcomm HS-USB Diagnostic 9002. i firsty selected Just 9002. By the way the froyo i have is pre release right ? So its my best interest to update with dell right?
Click to expand...
Click to collapse
It is the pre-release version yes. In terms of which version you choose is up to you. If you are looking for mo user customization then I would suggest Steves ROM's but if your looking for a simple froyo device the Dell 318 ROM works great as far as i can tell. Ive been using the Dell ROM for about three days now and have ad no issues to report. You just have to decide what suits you best.
ARHMogul said:
It is the pre-release version yes. In terms of which version you choose is up to you. If you are looking for mo user customization then I would suggest Steves ROM's but if your looking for a simple froyo device the Dell 318 ROM works great as far as i can tell. Ive been using the Dell ROM for about three days now and have ad no issues to report. You just have to decide what suits you best.
Click to expand...
Click to collapse
Cool makes sense. im only having one last problem . My device no longer has the 3g display signal and i cannot check or connect to the internet besides wifi. I have enabled data connection within the phone settings to no avail
demonchild1786 said:
Cool makes sense. im only having one last problem . My device no longer has the 3g display signal and i cannot check or connect to the internet besides wifi. I have enabled data connection within the phone settings to no avail
Click to expand...
Click to collapse
Thats odd, I had no issue with data.. It displayed the "H" vs 3G, but thats AT&T's new network.. I would try to do a factory reset and see if that helps. If not let me know, ill do some lookin for you
ARHMogul said:
Thats odd, I had no issue with data.. It displayed the "H" vs 3G, but thats AT&T's new network.. I would try to do a factory reset and see if that helps. If not let me know, ill do some lookin for you
Click to expand...
Click to collapse
Yeah that worked. Thanks ! loving the built in flash lol , its a huge step from dino 1.6
demonchild1786 said:
Yeah that worked. Thanks ! loving the built in flash lol , its a huge step from dino 1.6
Click to expand...
Click to collapse
Glad to hear you got it working! Enjoy your "all new" Streak
Adb fastboot time out
I AM HAVING TROUBLE WITH THE ADB...it starts to run and by the time it gets to about 47.35 seconds well it just has the error timeout ADB..how do i fix this
i am trying to up grade to the 2.2
i am using a windows vista 32bit please help as soon as possible...thank you
email me your walk through and information on how you all got this to work i would be so very thankful...
i can't even watch a Movie on my DELL STREAK....still caveman 1.6
help plz
ricanpone said:
I AM HAVING TROUBLE WITH THE ADB...it starts to run and by the time it gets to about 47.35 seconds well it just has the error timeout ADB..how do i fix this
i am trying to up grade to the 2.2
i am using a windows vista 32bit please help as soon as possible...thank you
email me your walk through and information on how you all got this to work i would be so very thankful...
i can't even watch a Movie on my DELL STREAK....still caveman 1.6
help plz
Click to expand...
Click to collapse
Try a different USB Port on your computer.. The tutorial as Streakdroid.com explains this and even has a bulletin just for that time frame There walk through is as good as it gets I assure you. Just take a look at the tutorial and the FAQ section. Good Luck!
Trouble with voice comands and blue tooth
I used the QDL and upgraded to 2.2 AT&T and I can't get my voice commands to work. What happened to nuance? after I try my voice commands it also locks up and I have to reboot. Should I try to reinstall my drivers and 2.2? Any help would be appreciated. Thanks
ARHMogul said:
If you followed the instructions on streakdroid, and still having an issue try this:
Open the CMD window as administrator (shift+ctrl+enter)
then enter: bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS (NOTICE there are 2 "D's" this is not an error, and is what is required for Windows 7)
after successful completion enter: bcdedit.exe -set TESTSIGNING ON (not case sensitive)
after successful completion close the window, and reboot. This should clarify your issue with the driver problem. Windows 7 sometimes has an attitude, this worked for me If not, please let me know.
Click to expand...
Click to collapse
Hey i just wanted to know if you know the command to enable driver verification aagin ?
Totally rediculous question here but what the hell is the qdl tool and where is it? I find all kinds of stuff on how to use it but nothing on what or where it is... thanx.
I am now a proud owner of an AT&T Streak w/2.2. OH Happy Day!!!
Once I got the proper drivers installed it was quite seemless and easy to do. the video like tutorial was well laid out. and very simple to follow. I sure hope those Geico Cavemen aren't on this forum 'cause it was so easy one of them could do it!!!
Hello all
Today I got the notification of an update available from HTC for my unlocked Titan (on Three UK), currently on 8107.
Yet again another HTC update that does not tell what it is for, but I decide to install it anyway.
However, the update process fails every time with error 801812DC (see pictures attached), saying that there is a problem in the back-up of the phone.
Rebooting the phone, the computer and connect/disconnect did not help, always the same.
Also, this error is not included in the list on windowsphone.com.
Anyone with the same issue?
Thanks
maTTeo
EDIT: Solved. Probably I did not have enough space on disk for the backup.
EDIT2: No, not solved. Now I have space, but still same problem.
mtcerio said:
Hello all
Today I got the notification of an update available from HTC for my unlocked Titan (on Three UK), currently on 8107.
Yet again another HTC update that does not tell what it is for, but I decide to install it anyway.
However, the update process fails every time with error 801812DC (see pictures attached), saying that there is a problem in the back-up of the phone.
Rebooting the phone, the computer and connect/disconnect did not help, always the same.
Also, this error is not included in the list on windowsphone.com.
Anyone with the same issue?
Thanks
maTTeo
Click to expand...
Click to collapse
I got the update too!
I am installing it now - I am guessing it's the drivers fix for 8107 based on the back up creation steps it has followed. If I get the error, I will update it. I am on step 7. Hope this is a fix and not another lock down update!
HEADS UP: those who want custom ROM etc, DONT update just yet.
EDIT: At step 9 - my phone restarted. I unlocked the screen and it said 'Update successful'. However since last 7 minutes my Zune is stuck at step 9 and says 'restarting your phone'
Did you check that you have enough free space to create the backup?
Sent from my TITAN X310e using XDA Windows Phone 7 App
I did the update without problems
Iosu
Sent from my TITAN X310e using Board Express
ogracia said:
Did you check that you have enough free space to create the backup?
Sent from my TITAN X310e using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Actually no. Thanks for the hint, this could have been the reason.
However, I tried again the update after closing a few applications (which were possibly using some space on disk), and the update was succesful.
Now after the update I realise I have only 6 Gb left on my C: drive.
Anyway, if that was the reason, why not to say: "Disk full" instead of "Error 801812DC"???? What does Microsoft expect from their users?
Thank you all for your support!
maTTeo
I am having the same error message. How much space did you free up?
I now have 11.3GB free on my C: drive and it is still not working. Same error every time.
churchwa said:
I am having the same error message. How much space did you free up?
I now have 11.3GB free on my C: drive and it is still not working. Same error every time.
Click to expand...
Click to collapse
How much space are you using on your phone? You need at min the same free space... If you can't then delete all the music etc to make the backup smaller
Sent from my TITAN X310e using XDA Windows Phone 7 App
Tried a new cable and no joy, also deleted all the music off my phone. Really don't want to factory reset so might wait for another update to come out.
Again, 801812DC
And here I am again, Tango update, same problem.
So I can confirm it was NOT due to lack of hard drive space. Now I have 30 Gb free on my hard drive, and 6 Gb of memory used on my Titan. Still, 801812DC.
Anybody figured a solution?
mtcerio said:
And here I am again, Tango update, same problem.
So I can confirm it was NOT due to lack of hard drive space. Now I have 30 Gb free on my hard drive, and 6 Gb of memory used on my Titan. Still, 801812DC.
Anybody figured a solution?
Click to expand...
Click to collapse
What's ur current spl/boot loader version? You need to upgrade to most recent htc spl 2.6 which meant to address error in updating with Zune.
habnzrot said:
What's ur current spl/boot loader version? You need to upgrade to most recent htc spl 2.6 which meant to address error in updating with Zune.
Click to expand...
Click to collapse
Bootloader version: 2.5.160015.3
No clue about SPL, where do I find it?
Found the update from HTC here:
http://www.htc.com/www/help/htc-titan/#download
HTC says it addresses errors 80070013 / 8007000F, hopefully mine too.
Now I have applied it, will try the update to Tango again.
Cheers
maTTeo
drupad2drupad said:
I got the update too!
I am installing it now - I am guessing it's the drivers fix for 8107 based on the back up creation steps it has followed. If I get the error, I will update it. I am on step 7. Hope this is a fix and not another lock down update!
HEADS UP: those who want custom ROM etc, DONT update just yet.
EDIT: At step 9 - my phone restarted. I unlocked the screen and it said 'Update successful'. However since last 7 minutes my Zune is stuck at step 9 and says 'restarting your phone'
Click to expand...
Click to collapse
The same thing happened to me, I end up manually restarting phone before zune completes. And I agree with ur caution that for those who wants hspl and custom rom don't attempt to install this update! Not worth the hassle.
Sent from my TITAN X310e using XDA Windows Phone 7 App
mtcerio said:
Bootloader version: 2.5.160015.3
No clue about SPL, where do I find it?
How can I update to the latest HTC SPL?
Cheers
maTTeo
Click to expand...
Click to collapse
Visit HTC titan support / download page.
Sent from my TITAN X310e using XDA Windows Phone 7 App
habnzrot said:
Visit HTC titan support / download page.
Sent from my TITAN X310e using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Thanks habnzrot, but unfortunately no, even after installing Bootloader 2.6 from HTC, same problem. Backup interrupts at 11%, phone restarts and error.
Any help?
maTTeo
Ok, really tried everything now, including:
- Updating SPL to 2.6 (latest available from HTC)
- Unliking the phone to Zune
- Reinstalling Zune and pairing the phone again
- Deleting the folder "Windows Phone Backup" as suggested by someone on the internet
- Running Zune as Administrator
- Deleting most of the apps from the phone
- Creating even more disk space on my computer
- Using another USB cable (instead of the stock HTC USB cable)
I phoned HTC support, and their solution is hard reset. If, after that, still does not work, I have to send my phone to repair.
Obviously I would like to leave hard reset as last option.
I noticed so many other people have the same problem:
http://answers.microsoft.com/en-us/...&CurrentScope.Filter=wp7&askingquestion=false
But no-one can answer. I wonder:
- Why this error code is not included in the web page I am sent to, by Zune, to check the error code?
- There must be ONE guy at Microsoft, who implemented this error code. Why they are not answering and telling us what it is?
I am very frustrated.
Cheers
maTTeo
Have you tried updating with another computer?
Also, try this:
1. Run services.msc (If you're using Windows XP, press Start, click Run, type services.msc then press Enter. If you're using Windows Vista or later with no Run in the Start menu, type services.msc in the search box then press Enter.)
2. Look for the "Automatic Updates" service, make sure it is started. If not, start it. Change its startup type to Automatic.
3. Look for the "Background Intelligent Transfer Service" service, make sure it is started. If not, start it. Change its startup type to Manual.
4. Look for the "Automatic Updates" service, make sure it is started. If not, start it. Change its startup type to Automatic.
I'm also having the same issue doing the force update trick however I'm getting a different Update Error Code 80180048!!
I've searched the web and tried every solution but still no success??
Phil_123 said:
Have you tried updating with another computer?.
Click to expand...
Click to collapse
No, not yet, because I don't have another computer available. But I will try this too.
Phil_123 said:
Also, try this:
1. Run services.msc (If you're using Windows XP, press Start, click Run, type services.msc then press Enter. If you're using Windows Vista or later with no Run in the Start menu, type services.msc in the search box then press Enter.)
2. Look for the "Automatic Updates" service, make sure it is started. If not, start it. Change its startup type to Automatic.
3. Look for the "Background Intelligent Transfer Service" service, make sure it is started. If not, start it. Change its startup type to Manual.
4. Look for the "Automatic Updates" service, make sure it is started. If not, start it. Change its startup type to Automatic.
Click to expand...
Click to collapse
I don't have the "Automatic Updates" in the list, while "Background Intelligent Transfer Service" is already started.
Thanks,
Matteo
Phil_123 said:
Have you tried updating with another computer?
Click to expand...
Click to collapse
Tried on a different machine, with a fresh installation of Windows 7 and Zune. Same problem, process interrupts while backing up the phone at 13%. Then phone restarts and update fails. This time, however, the error code is 80070026
Cheers
maTTeo
mtcerio said:
Tried on a different machine, with a fresh installation of Windows 7 and Zune. Same problem, process interrupts while backing up the phone at 13%. Then phone restarts and update fails. This time, however, the error code is 80070026
Cheers
maTTeo
Click to expand...
Click to collapse
The same problem with my Titan update.
Currently only hard reset helps