Hi,
I'm trying to find a cover for my Zpad. I find the leather covers to be a bit bulky while I use the tablet around the house. I was wondering if any of the leather / fake leather covers have the option of detaching the top / front section so I would only be using the tablet harness?
Thanks,
MD
Related
The case that comes with the K-Jam isnt as small as it could be so I would like to get a case that is a little more form fitting.
Has anyone looked at the leather case that pdair.com has for the k-Jam/wizard? I cant tell how it attaches to the K-Jam but I think its got a clear plastic sheet that fits in between the screen and keyboard and covers the keyboard. That is why I am reluctant to buy case. I had something like that for my PDA2K and I didnt like the plastic sheet in between keyboard and screen. It seemed that the screen would not slide so easily before using the case and afterwards the screen seemed to be loose and slide to easily. I dont want to mess up the tight feel of the screen / keyboard on this one.
If you know anything about this case or any other please post a response.
Darrin
I am thinking of getting one of the cases on theis page: www.krusell.se. I like the Horizontic style. The cases are shown under the ETEN m500 size but the m500 and K-Jam are about the same size.
The Krusell cases are well made and fit well, but they are not smaller than the stock cases.
Look http://www.krusell.se/product.php?productID=2089&category=16 or http://www.krusell.se/product.php?productID=2128&category=42 although the pdair and piel frama are the only ones that allow you to use the keyboard whilst in the case. I have the pdair.com one and it fits my needs (I am able to use the keybaord quite effectively with the plastic cover (it doesn't cover all of it); I have had the plastic 'crumple' a few times but this minor problem is more than outweighed by the benefits.
these flip cases look quite good
http://www.mobilefun.co.uk/product/8458.htm
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
zaki67 said:
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
Click to expand...
Click to collapse
It looks almost identical to the PDAir one. Nice aluminium insert which works with their magnetic car holder. Since when did aluminium react to magnetism??? (I know the probably have a thin magnet insert btw)
Hello,
These cases are also compatible with HTC Wizard:
http://www.expansys.pt/product.asp?code=124376
http://www.expansys.pt/product.asp?code=123697
Anyone has one of them?
Cheers,
Francisco Teixeira
Krusell the way forward...
Krusell is the way forward, with the multidapt clip of course...
http://www.krusell.se/product.php?productID=2089&category
Look on EBay for best prices :wink:
mcwarre said:
zaki67 said:
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
Click to expand...
Click to collapse
It looks almost identical to the PDAir one. Nice aluminium insert which works with their magnetic car holder. Since when did aluminium react to magnetism??? (I know the probably have a thin magnet insert btw)
Click to expand...
Click to collapse
Do you have the book style (landscape-opening) or the flip style (portrait opening) model?
You don't find any problem with opening and closing the keyboard, with that plastic insert?
I've had the PDAir leather case (flip format -- hinge on the bottom) for several weeks now -- it works pretty well for the most part. It's a bit tricky putting the Wizard in the case; the plastic bit that fits between the keyboard & LCD has a Velcro bit on the end that's a bit thick for the space provided. Said Velcro piece attaches to the case via a tab that folds up over the right side, between the camera button & IR port -- unfortunately it covers the reset hole.
The case is a bit loose-fitting, which probably can't be fixed without sacrificing the ability to deploy the keyboard; AFAIK, it's the only case that lets you use the keyboard without removing the Wizard from the case. It's not as good as the Krusell I used with my BlueAngel, but it's good enough.
rooCASE Dual-View Multi Angle (Black) Leather Folio Case Cover for Sony Tablet S1 - From Amazon.com, USD$29.92 + Free Super Saving Shipping or Free Two-Day Shipping with Prime
I bought this last week and managed to use it over the weekend. The look and feel is genuine leather with micro suede interior. It doesn't feel bulky on the slate side but over on the wrap design, it isn't too bulky. The case itself is very light weight and durable.
There are two parts to the case itself; the cover that goes on the tablet itself and the outer case that wraps around the cover and tablet. The cover on the tablet is removable from the case and is attached to the case via velcro (velcro on the inside of the case and felt on the rear cover). It comes with a magnetic flap closure. Their are openings around the cover that gives access to all ports and controls. The cover isn't blocking the front camera, rear camera, or the IR remote.
This will NOT work on the cradle, however.
There are three angles you can place the tablet. Since this is a dual-view multi angle case, you can have the tablet placed in landscape or portrait mode and utilize the three different angles.
This is a better option than the carry case offered by Sony. I would highly recommend this. I've actually accidentally dropped it once with case and cover on, and there was no damage to the tablet or the case itself.
Im wanting to get this case. Question, do you detach the tablet and reposition in portrait using the velcro part?
Sent from my DROID X2 using XDA App
jml215 said:
Im wanting to get this case. Question, do you detach the tablet and reposition in portrait using the velcro part?
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Yes, you do.
i searched all the net websites i could, but couldn't find a leather case flip type with a belt clip, i found regular leather case with belt clip but not flip type of book type with a belt clip
I'm also looking for a holster, but a vertical one for the naked device. I will update if I find one that would suit your needs.
Sent from my Xperia Z Ultra using Tapatalk 4
any luck finding some type of belt clip or case that slides into a belt clip ???
http://www.ebay.com/itm/130973109604?var=430185201144&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I got the above holster made for the Galaxy Mega 6.3. The ZU is a tad less wide than the width of the holster. So I put a few layers of gaffer's tape at the holding arms which then holds the ZU firmly in place. It's a sturdy holster, holds the ZU well, and price is cheap. I've looked everywhere and can't find a holster for ZU. PDAir makes leather sideways pouch holster for ZU but it's $40 and bulkier.
image from ebay, I only used the holster, not the case:
Mine from Brando is a leather case comes with belt clip.
teddythomas said:
Mine from Brando is a leather case comes with belt clip.
Click to expand...
Click to collapse
yes but it is not flip type
OK HERE YOU GUYS GO , FOUND THIS & ORDERED A COUPLE FOR ME & SOME FRIENDS WHO WANTED THEM .
THEY COME IN DIFFERENT COLORS . HERE IS A SCREEN SHOT OF THE PINK 1 . I BOUGHT 5 OF THEM FOR $40
SHIPPED DHL & THEY GOT HERE IN 2 DAYS . I BOUGHT WHITE , BLACK , MIDNIGHT BLUE , PURPLE , & PINK
http://www.alibaba.com/product-gs/1532480471/hard_plastic_combo_belt_clip_holster.html
bump
See this http://forum.xda-developers.com/showthread.php?t=2457512&page=3
jaime4272 said:
See this http://forum.xda-developers.com/showthread.php?t=2457512&page=3
Click to expand...
Click to collapse
why glue something on a case ( that will eventually the glue will fail on )
When you can buy a case & belt clip from the link I shared ???
You don't even have to use the case provided , I use the belt clip with my
Incipio DualPro SHINE case I have on my phone .
Well it depends on what tipe of glue you use I use set glue and it bonds very well.
Any good leather cases that anyone has seen? I'd prefer one without a flap and just a case with leather on the back.
Bumping this. Found that the LG premium case just imitates leather, so the hunt continues.
Hard to search for a leather case since every result comes back as a flip case
There are two Otterbox cases
And see here
https://www.otterbox.com/en-us/surface-duo
What other options are there?
Small Kindle pouch is a good short term alternative
I have the Otterbox Ocity Sleeve and I really like it. Very sleek and form fitted. It has rounded edges and is very thin. I can fit the Duo in my front pockets with this sleeve. I am using the bumper also, which makes it a little harder to remove the Duo from the sleeve. Because of the grip of the rubber. Jury is still out on whether I'll keep using the bumper.
Noreve cases
https://www.noreve.com/fr/surface-duo/4216-pochette-cuir-microsoft-surface-duo.html
https://www.noreve.com/fr/surface-duo/4217-coque-cuir-microsoft-surface-duo.html
A good value pouch option.
Deleted
jah said:
A good value pouch option.
Click to expand...
Click to collapse
Now with an image
I have an Otterbox Ocity case that is brand new that I am not using. It has a pen holder attached which perfectly fits the slim pen. Pm me if interested.
Is there a good non-pouch cover, more like a book cover?
Some new actual cases coming mid to end of December...
Ranyi for Microsoft Surface Duo Case, Ultra Slim Thin Leather Flip Case for Microsoft Surface Duo 8.1" (2020)
Ranyi for Microsoft Surface Duo Case, Luxury Retro Design PU Leather Flip Case for Microsoft Surface Duo 8.1"
PUROOM for Microsoft Surface Duo Case Classic PU Leather Cover Full Protection Shockproof Bumper Flip Case Cover for Microsoft Surface Duo 8.1
Bandage said:
Some new actual cases coming mid to end of December...
Ranyi for Microsoft Surface Duo Case, Ultra Slim Thin Leather Flip Case for Microsoft Surface Duo 8.1" (2020)
Ranyi for Microsoft Surface Duo Case, Luxury Retro Design PU Leather Flip Case for Microsoft Surface Duo 8.1"
PUROOM for Microsoft Surface Duo Case Classic PU Leather Cover Full Protection Shockproof Bumper Flip Case Cover for Microsoft Surface Duo 8.1
Click to expand...
Click to collapse
FYI this case sucked...prevents DUO from folding completely open, which kinda defeats the purpose.
Hi,
Got the Surface Duo.
Looks like it is difficult to find either a "cover" that will allow to use it as is and not a pouch :-(
I think given the configuration of the device a "skin" will be the way to go.
Regards.