Yeap thats right! I confirm that it works just fine..In Cyprus is not Official yet but we can make it work here and of course on any country thanks to the guy who made it!
here's how it goes:
First download and install the free Zune software from Microsoft.
Having done that, click on the Start button or orb and in the search box type regedit and hit Enter. This will open the Registry Editor.
Navigate to the following key:
HKEY_CURRENT_USER\Software\Microsoft\Zune\Features
Here double-click on Marketplace – you will see the codes of the following countries:
AT,AU,BE,CA,CH,DE,ES,FR,GB,IE,IT,MX,NL,NZ,SG,US
You will see the same value data for Apps and SignInAvailable too.
Now one after the other, in each of these three – Marketplace, Apps, SignInAvailable, modify the value data, by adding your Country code.
I just write CY (Cyprus)
It should now look like this:
AT,AU,BE,CA,CH,DE,ES,FR,GB,IE,IT,MX,NL,NZ,SG,US,CY
Exit regedit.
NOW connect your Windows Phone to your Windows Computer.
Your Zune software will automatically start and you will be alerted with a following message:
FEATURES HAVE CHANGED!
Click OK.
You will see the Marketplace tab too now, in your Zune software.
Here not only can you download Free apps, you can also BUY the Paid apps, legally!
Select the App you want and click on the FREE button to install it. If its a Paid app, you can choose to Try it first or Buy it directly.
There is one hitch. The next time you connect your Windows Phone, you may not see the Marketplace option. This means that you will have to modify the registry every time you connect it. I have therefore created this registry file which I first double-click on, to add its contents to my Windows registry, and then connect my Windows Phone to my Windows 7 computer.
ALSO CHECK WP7 MARKET PLACE ENABLER:
Do note that, you may have to first run the Enabler, before, every time you connect your Windows Phone.
works like a charm!!!!
arkatis said:
Yeap thats right! I confirm that it works just fine..In Cyprus is not Official yet but we can make it work here and of course on any country thanks to the guy who made it!
here's how it goes:
First download and install the free Zune software from Microsoft.
Having done that, click on the Start button or orb and in the search box type regedit and hit Enter. This will open the Registry Editor.
Navigate to the following key:
HKEY_CURRENT_USER\Software\Microsoft\Zune\Features
Here double-click on Marketplace – you will see the codes of the following countries:
AT,AU,BE,CA,CH,DE,ES,FR,GB,IE,IT,MX,NL,NZ,SG,US
You will see the same value data for Apps and SignInAvailable too.
Now one after the other, in each of these three – Marketplace, Apps, SignInAvailable, modify the value data, by adding your Country code.
I just write CY (Cyprus)
It should now look like this:
AT,AU,BE,CA,CH,DE,ES,FR,GB,IE,IT,MX,NL,NZ,SG,US,CY
Exit regedit.
NOW connect your Windows Phone to your Windows Computer.
Your Zune software will automatically start and you will be alerted with a following message:
FEATURES HAVE CHANGED!
Click OK.
You will see the Marketplace tab too now, in your Zune software.
Here not only can you download Free apps, you can also BUY the Paid apps, legally!
Select the App you want and click on the FREE button to install it. If its a Paid app, you can choose to Try it first or Buy it directly.
There is one hitch. The next time you connect your Windows Phone, you may not see the Marketplace option. This means that you will have to modify the registry every time you connect it. I have therefore created this registry file which I first double-click on, to add its contents to my Windows registry, and then connect my Windows Phone to my Windows 7 computer.
ALSO CHECK WP7 MARKET PLACE ENABLER:
Do note that, you may have to first run the Enabler, before, every time you connect your Windows Phone.
works like a charm!!!!
Click to expand...
Click to collapse
Thanks for the post but when i went there, at the last phase i couldnt find features or it was a mistake from your post ? Just curious because all i saw was the rest in this form HKEY_CURRENT_USER\Software\Microsoft\Zune\ the features folder WAS missing from my registry editor ? can you help ?
zinty said:
Thanks for the post but when i went there, at the last phase i couldnt find features or it was a mistake from your post ? Just curious because all i saw was the rest in this form HKEY_CURRENT_USER\Software\Microsoft\Zune\ the features folder WAS missing from my registry editor ? can you help ?
Click to expand...
Click to collapse
Agreed ,same issue bro... please help
no features in zune folder here as welll
yes same problem, kindly respond
You can download free apps only, you can't buy paid apps.
Because you have to register a credit card that was issued from a country which already supported WP7
I've been into this before
Thats strange guys... I have the Features folder in the registry!
Try and add it by yourselves.. Try to sign in into Zune...let it update and then close it in order to make this tweak! If you still can not find it please create the values in regedit! Go to regedit then HKEY_CURRENT_USER\Software\Microsoft\Zune\ and create a key inside Zune...Now call it Marketplace and then open it..Now on the right side just create a string value and put inside you country code... Try reopen Zune...
Have you tried the MARKET PLACE ENABLER????
arkatis said:
Thats strange guys... I have the Features folder in the registry!
Try and add it by yourselves.. Try to sign in into Zune...let it update and then close it in order to make this tweak! If you still can not find it please create the values in regedit! Go to regedit then HKEY_CURRENT_USER\Software\Microsoft\Zune\ and create a key inside Zune...Now call it Marketplace and then open it..Now on the right side just create a string value and put inside you country code... Try reopen Zune...
Have you tried the MARKET PLACE ENABLER????
Click to expand...
Click to collapse
I had the same problem but I did the market place enabler first but it returned a message that some features may not work. It went on run and I saw the message FEATURES HAVE CHANGED. I connected my phone but didn't see the market tab. I'm still trying.
However, I checked the Regedit and this time the features folder was there and my country already added! I didn't have to enter it.
Market place enabler will do the trick! try and download a free application and tell me if it's working!
bjkizito said:
I had the same problem but I did the market place enabler first but it returned a message that some features may not work. It went on run and I saw the message FEATURES HAVE CHANGED. I connected my phone but didn't see the market tab. I'm still trying.
However, I checked the Regedit and this time the features folder was there and my country already added! I didn't have to enter it.
Click to expand...
Click to collapse
ok, it now works. The trick/(s)? I logged off my pc and signed in as adminstrator. I run the market enabler without issues this time, connected my phone, zune lauched automatically and viola! market place tab is there for me to start exploring. I have that belief though that we will not be able to buy cos the credit card will tell the region from which you are and return errors but who in the first place thought we'd have windows 7 on this hd2? That is therefore small a problem that I know someone on xda will solve some day...thanks
Glad it worked for you also bro! You can now download free applications with no problem at all!
I haven't checked the paid apps because i never buy anything! LOL!
Good luck!
Do note that, you may have to first run the Enabler, before, every time you connect your Windows Phone.
arkatis said:
Glad it worked for you also bro! You can now download free applications with no problem at all!
I haven't checked the paid apps because i never buy anything! LOL!
Good luck!
Do note that, you may have to first run the Enabler, before, every time you connect your Windows Phone.
Click to expand...
Click to collapse
Free Apps -------------- |x|Check
Paid Apps -------------- | | How to buy them if you can't even register your cc ?
Some people reported that this method works on free and paid apps.. But i will not risk it to buy anything! Free apps are still good!
hmm i cannot seem to get this working, it is stuck at accepting terms, the finish button is "greyed out" can only press cancel.
--__-- said:
hmm i cannot seem to get this working, it is stuck at accepting terms, the finish button is "greyed out" can only press cancel.
Click to expand...
Click to collapse
same to me
no luck here
To activate features, create a new Key at HKCU\Software\Microsoft\Zune named "FeaturesOverride", then create DWORD (32-bit) values inside the key "FeaturesOverride" with the following names, "Marketplace" and "SignInAvailable" setting their value to “1” to turn them on.
I tryed ewerything and still cant go to market place. It keeps saying
``marketplace is not available in your country/region.``
if someone can help me i appreciate
regards
i did everything, but when i try to download an free up, it forces me to sign in, but i don't have a zune account and nor can i create one in greece i use my hotmail and a blank terms and conditions page appears. no matter what i press, i get the same error: can't submit your acceptance....blah blah blah check your internet connection. oh, and when i try to create an account directly from the program after i enter all the info, it will simply get stuck at the final 'signing in' part. if i click finish, it'll be as if nothing happened!!
peter768 said:
i did everything, but when i try to download an free up, it forces me to sign in, but i don't have a zune account and nor can i create one in greece i use my hotmail and a blank terms and conditions page appears. no matter what i press, i get the same error: can't submit your acceptance....blah blah blah check your internet connection. oh, and when i try to create an account directly from the program after i enter all the info, it will simply get stuck at the final 'signing in' part. if i click finish, it'll be as if nothing happened!!
Click to expand...
Click to collapse
Man i will give you a simple solution! If in Greece you can't get Market place to work and you dont have an account just listen to this!
Register on Zune and make a new account...Write your hotmail and on postal code just go to Google and write "USA Postal codes"... Copy a postal code from there and paste it in Zune and you will have a US account ready to sign in! I use the Market place just fine!
here you are...postal codes:
http://www.geonames.org/postalcode-search.html?q=&country=US
Related
This a small application I wrote to automatically retrieve the DeviceID on your PC without having to open the registry editor. It can also create the DeviceID.txt file with the id value stored. It's written in Java so it requires JRE to be installed (most of you already have this)
http://rapidshare.com/files/403680176/DeviceID.jar.html
Make sure you have Sony Ericsson Update Service installed otherwise the device id will not be created in the registry
UPDATE: App updated to show all Device Ids stored in the registry
still dont work for me
windows 7 x64
It's been downloaded too many times (10) for a Free Rapid Share account, it is no longer downloadable, you'll have to upload elsewhere
Balur said:
It's been downloaded too many times (10) for a Free Rapid Share account, it is no longer downloadable, you'll have to upload elsewhere
Click to expand...
Click to collapse
new link posted
Hi !
As you can see I have more Strings in the registry ?
Whats your methot of determining which is the right one as they all show different DeviceID Strings ?
THX
pietropizzi said:
Hi !
As you can see I have more Strings in the registry ?
Whats your methot of determining which is the right one as they all show different DeviceID Strings ?
THX
Click to expand...
Click to collapse
I always get the first one, there is no way afaik to determine which one is getting used at any point. I can maybe change it so that it displays everything and lets u select the one you want to use
Well the point's not what I want to use, it more what's the right one at time of flashing. Is it save to delete those keys so the right one is rebuilt inn case of reconnecting the device ?
it's really not easy to find which one is being used at any point. i don't know if it's safe to delete them from the registry, although i would suspect that it is. just make sure you use the same usb port whenever you flash. that way you avoid overcomplications with this issue
THX for the info. I'd try to find out the right one.
In my case it was the second key found, not the first!
So this tool does not work for everyone.
Hello all,
I have found WORKING little app to save CABs from MarketPlace. You can download the app here:
http://blog.idlezone.org/post/2010/01/11/Windows-Mobile-MarketPlace-:-choose-where-to-install
(use fixed version posted in the comments of the article: http://blog.idlezone.org/public/DarkApps/DarkCABCatcherInstaller_quickfix.CAB)
Awsome, thanks for posting ! =d
Thank you So So So Much
Will
Works it also for paid apps?
doesnt work for me.
Awsome, How do you work this thing.
When I run DarkCABCatcher, I have set fom folder to \.\Application Data\Volatile to \.\My Documents.
The DarkCABCatcher application shows the following:
MKP5C5036.cab OK!
MKP5C5036.cab installed.
MKP5C5036.cab started.
MKP5C5036.cab copy Ok.
When I look in my \.\My Documents folder there is no .cab file collected.
Any ideas?
Thanks
Richard
Thanks !
I never used MarketPlace yet, but just in case, I'll keep that trick handy and try it.
I don't understand their position on "piracy", since I generally only use free software...
When it's not free, I buy the licenses, but since I'm flashing a lot these months, I really doubt MarketPlace would recognize my device next time I log on, so this trick may be unvaluable... Just to keep access to what I had legally bought.
Thanks for this, but unfortunately on cooked WM6.5 portuguese ROM it doesn't work. I confirmed that I have NetFW3.5 installed so I don't know what's wrong:
What a pity - don´t work at all on T-Mobile Vario V (HTC TouchPro2) with Windows Mobile 6.5.
Sometimes it write the cab is copied - but can´t find it in the destination folder.
Sometimes it just don´t show anything.
Yours
WeT-Klb
Cool app, didn't work
The critical thing this app shows is where the temporary CAB files are downloaded when installing from the Marketplace app.
Just open this folder in Windows Explorer while the phone is connected to your device. You have to turn on "view hidden and system folders" to see the folder on your phone.
Wait and watch the folder during the install. It will create a CAB file, which will get an icon as soon as the file is finished writing to the device. Quickly copy the file off the phone onto your computer.
(I have installed z-zip and associated CAB files with the program, which is why I get a nice icon as soon as the download has finished.)
http://forum.xda-developers.com/showthread.php?p=24513246#post24513246
Hello all,
Not a great first post, but I have a problem, that I cannot solve myself.
I bought LUMIA 800 from a guy on ebay, really good offer(ofcourse), the phone was in good condition, all functioning. Checked the IMEI - not stollen. After taking it home, I noticed that I cannot log into microsoft live, facebook and twitter, from the add new account menu. It keeps giving me - there is an error, please try again later. However, day after that, the phone gives me a message - this demo phone is going to be reset. After that reboots, with all my data formated and starts installing content, like some demo contacts, messages and etc. Also a promo video is played, while I`m loading it.
So, in short - is there a way to get that phone to function normally? I tried both formats, from the menu and with the 3 buttons, it always starts loading the demo contacts and etc.
Any help will be greatly appreciated!
Pavel
ok, did my homework and searched the forums. I will try with standart debranding method, hope it works.
you can flash it using NCS (Nokia Care Suite). I will upload a handy tool for you. wait a moment....
here you can download the tools: http://www.multiupload.nl/91Y8NK6L7E
greatly appreciated Tim! thank you
Hi,
I also got one of those demophones and I tried Tim's method but When I do Step: 20 and Step: 21 I do not see the newer firmware there.
The line where it should be is plank.
I have downloaded firmware from navifirmplus and place it to that exact place what it is on Tim's document: C:\ProgramData\Nokia\Packages\Products\RM-801 without any subfolders.
But on my PC I had to make that products folder too, there was none when I first time navigate to that folder, I check File -> setting from product support tool for store and there that folder is right but I do not see that newer firmware, so can anyone help?
you must run the applications under Administrative rights. so right click on the NCS and click: "Run as Administrator"
otherwise the program doesn't have access to the c:\programdata\......
most accounts have administrator rights, but if you have UAC (userAccountControll) enabled on your computer than the error that you describe will come.
Hi tim!
I tried with administrative rights, now effect, still do not show "new software version"
Does that Product Code have to be same on downloaded firmware and that it is already on phone? caude in phone I have 059N394 and firmware I downloaded is 059N341
You solved your own problem ;-).
yes that's the issue, make the productcode that you downloaded the same as the productcode of your phone, and it will work.
in NaviFirm there is not a code with "059N394", I would download the firmware that is applicable to my country and color, and most matching with the productcode of the phone.
sorry for my bad english....
Please hit the "Thanks" button if I helped you....
Thanks! ur a MAN!!!
It worked!!
Please have you got someone firmware NOKIA LUMIA 800 RM-801 for Nokia Care Suite ?
Thank you very much for your help.
David
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
kazador07 said:
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
I fixed the zte avid plus z828 frp problem!
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
please do!!!!
Yerhope said:
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
Click to expand...
Click to collapse
Hello yerhope!
from your last report on zte z828 frp bypass, i understood that you finally fix the , not able to access the Developer option nor access the factory reset. I am very keen to know how you did it.
I am a victim of this same circumstance.
guide please?
cant click reset my self
Hey, I would like to highly request the tutorial....
Furthermore, I'd like to say I've poured over these sort of sites, rephrased my questions, etcetc all trying to get the same things accomplished, getting past the google password, and yet you with your quick clearly stated actually step by step explanation were the one to get me the farthest in fixing this problem. :highfive:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
can root and remove with gcpro.
thats what i did. with this, even wen u get into settings and tap factory reset, ntn will happen.
re: zte z828 resolved problem???
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
xdauser9981 said:
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
Click to expand...
Click to collapse
He did get in. I did get in myself but when i tap factory reset nothing happen.
(Security patched)
Maybe he did resolve it like i did.
Root and remove it with gcpro
Thats what i did.
On some ZTE phones (has worked on 1 but not another for me), you can use the emergency dialer to dial:
*983*987#
This will lead you directly into factory reset options (if it works).
Solution worked on Acer Iconia B1-850 Tablet
Yerhope said:
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
Click to expand...
Click to collapse
Solution!
Yerhope said:
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Click to expand...
Click to collapse
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
o12VOLTSo said:
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
Click to expand...
Click to collapse
Does this mean you have confirmed this on ZTE?
Yerhopes solution worked for my zte lever
Follow yerhopes solution after step 15 while in settings go to backup and reset make sure back up data is off then factory reset erase Everything phone will reboot old owners info gone no need to download anything worked for 2 Zte levers i bought from ebay.
Bought a EE Jay Tablet (also a ZTE tablet) that had FRP enabled, easiest way I could do it was
1. connect to wifi, get to the previous account required screen.
2. open the keyboard and hold the @ symbol and open the keyboard settings.
3. top right corner press the 3 dots and choose help and type in apps in the search box.
4. access the app settings screen via the link from the help section then goto all and launch settings app
5. enable unknown sources in security and return to app settings screen and launch chrome this time or any browser.
6. goto http://rootjunkysdl.com/files/?dir=Apps and download this file com.sika524.android.quickshortcut.apk
7. you may get a download notification that the file has finished if not go back again to the app settings screen and all again and launch downloads app
8. you will now see the file download open it and install and then open the app
9. in the quick shortcut app search for google account and choose email and password and select try
10. now the google accounts manager has launched, in the top right corner press the 3 dots and choose browser sign-in
11. sign in with a google account and once done it will close and go back to the quick shortcut maker.
12. you still won't have access yet but all I done was reboot the device and continued the setup, this time there was no errors or required sign in and had full access.
Hope this helps someone, this was basically a copy of this video which may be helpful https://www.youtube.com/watch?v=GKdVvBSIb0M
Idk wat im doing but watever I do cant make crap any worse so I went under security and theres a place says trusted agents I clicked that and it said google smart lock so I turned it off im hoping this works guys ill let u know
yes
Arykit said:
Does this mean you have confirmed this on ZTE?
Click to expand...
Click to collapse
I used this method, personally, for zte Avid I believe. Yerhope's solution works for some firmwares prior to firmware i was on. i'm sorry, i do not recall that at this moment as it was some time ago. if Yerhope's solution is not effective for you, then progresss to my steps that pick up right where previous solution left off. so once again, YES, this worked on my device, did not test for others. my understanding is kingo can acquire root access in a special way as well that will allow you to adb clear frp. looking for commands? i do not have them sorry.
vcREG is a registry editor for lumia windows phones that has SYSTEM level access to the registry. the tool also has the ability to unlock all app capabilities for third party apps(interop unlock), and give SYSTEM level access to most of the filesystem through MTP.
new in version 1.7: thanks to @gus33000 for pointing out some registry values set for the interop unlock that may cause versions of rs1+ to break compatibility with WP8 apps. this has been fixed. For interop unlock, i suggest you use @gus33000 Interop Tools as his tool is more likely to have better support for changes in the future, as i am too bogged down with other projects.
thanks to @Wack0Distractor for sharing the idea and the acer service that makes this unlock for the X50 series phones possible. also thanks to @ngame for providing the test devices and the many hours of debugging, and @djamol for the main reason any of these unlocks are possible.
Instructions for X50 series phones like the 550,950/XL
ndtk_acer_services.zip uploaded below contains acer.service.acersystemservice.spkg, NdtkSvc.dll, and newndtksvc.dll.
1.Go to settings and turn on developer mode.
2a. For APPX version, download vcregUWP_1.7+dependencies.zip,unzip, install dependencies, then install the vcreg appx
2b. For XAP version, Sideload vcREG_1_7.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose x50 series unlock. You will receive an error about the acer service not running. That's ok for now. Click step 1 and it will tell you to install the acer system service and copy some files. To install the acer system service, use iutool [rs and newer builds,this version is essential,old versions will probably not work] (can be found here. thanks @Wack0Distractor ).
run this command as administrator
iutool -v -p "path to the file acer.service.acersystemservice.spkg"
if you receive error 0x80070490, disconnect your phone from usb, go to control panel on your pc, devices and printers, find your windows phone and remove device. reconnect the usb to your phone,and after it reinstalls the drivers automatically, run iutool command above again.
if you receive error 0x8024a110, your phone should reboot to the gears UI in a minute. if not, run the command again. if it still doesnt auto reboot, manually reboot your phone. It should reboot into the gears UI, then back into the OS. if it still fails and doest show gears, give you phone a rest for 5-10 minutes and retry(usually needed after a new rom flash).
4.When you're back in the phone OS, copy newndtksvc.dll and ndtksvc.dll to your documents folder on your phone through USB
5.Go to the app bar, then choose x50 series unlock. You should no longer receive the error about the acer service. Now click step 2 and follow the rest of the instructions from the app.
6.If you've taken the silent extras/advanced+info update, or updated that app manually, be sure to choose the option "Restore NDTK 950/XL" in the "x50 series unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
Instructions for older devices
1.Go to settings and turn on developer mode.
2a. For APPX version, download vcregUWP_1.7+dependencies.zip,unzip, install dependencies, then install the vcreg appx
2b. For XAP version, Sideload vcREG_1_7.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose classic unlock
3.If you've taken the silent extras+info update, or updated that app manually, be sure to choose the option "Restore NDTK" in the "classic unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
@vcfan thanks for mention
Not bad to add this that Our New hack for X50 series tested on both RS1 and TH2 (10586.107 to 14393.67) and these OS Versions are tested and supported Thanks for you and @djamol's hard work and other guys who helped in this hack .
Also here is a video that show you I added work with gloves on my 950XL to my phone and it work and etc.
http://www.aparat.com/v/HoCbk
Sorry for my bad English
Guys Do not TRY Full FILESYSTEM ACCESS ON X50 Series .
If you want to Change your X50/XL device font please try this app :
http://forum.xda-developers.com/showpost.php?p=68465197&postcount=46
Universal Interop Unlock is Coming :
http://forum.xda-developers.com/showpost.php?p=68467581&postcount=56
Wow, wow, wow! Great news! Thank you guys, @vcfan and @djamol, and @ngame and all guys who worked on this hack! xda rulez!
Awesome job! Any chance we can get some documentation on the methods?
G.moe said:
Awesome job! Any chance we can get some documentation on the methods?
Click to expand...
Click to collapse
@G.moe, what kind of documentation are you looking for? Have you tried to press large gray buttons saying "CLICK TO SHOW CONTENT" at @vcfan post? :laugh:
Or you are looking for the source code and hack method concept? Use reflector or any other .net disasms to get the app's sources
Thanks works fine.
I have trying MTP and now 950 XL charging only on PC.
Someone have original values in registry?
titi66200 said:
Thanks works fine.
I have trying MTP and now 950 XL charging only on PC.
Someone have original values in registry?
Click to expand...
Click to collapse
Guys in the video I recorded I tell do not try mtp hack it won't work also sftp doesn't work at least for me. If we can handle it at last we let you know.
Only concentrate on Interop and capability unlock and public registry hacks.
Also you can add work with gloves and double tap to your devices .
We are still working on many things to handle
i still try to get "gears" :crying:
tried few times...
dxdy said:
i still try to get "gears" :crying:
tried few times...
Click to expand...
Click to collapse
After Hard reset, Same for me
titi66200 said:
After Hard reset, Same for me
Click to expand...
Click to collapse
my 950XL have 14393.67 and also make HR two weeks ago...
SUPER GREAT !!!! WORKS LIKE A CHARM !!!
Many many many thanks..
works on Microsoft Lumia 950XL - RM-1085 -059X4X5
only MTP / full filesystem does not work but as i understand they are busy with it
vcfan said:
vcREG is a registry editor for lumia windows phones that has SYSTEM level access to the registry. the tool also has the ability to unlock all app capabilities for third party apps(interop unlock), and give SYSTEM level access to most of the filesystem through MTP.
thanks to @Wack0Distractor for sharing the idea and the acer service that makes this unlock for the X50 series phones possible. also thanks to @ngame for providing the test devices and the many hours of debugging, and @djamol for the main reason any of these unlocks are possible.
Instructions for X50 series phones like the 550,950/XL
1.Go to settings and turn on developer mode.
2.Sideload vcREG_1_6_W10.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose x50 series unlock. You will receive an error about the acer service not running. That's ok for now. Click step 1 and it will tell you to install the acer system service and copy some files. To install the acer system service, use iutool (can be found here. thanks @souma_rox).
run this command as administrator
iutool -v -p "path to the file acer.service.acersystemservice.spkg"
if you receive error 0x80070490, disconnect your phone from usb, go to control panel on your pc, devices and printers, find your windows phone and remove device. reconnect the usb to your phone,and after it reinstalls the drivers automatically, run iutool command above again.
if you receive error 0x8024a110, thats ok. your phone should reboot to the gears UI in a minute. if not, run the command again. if it still doesnt auto reboot, manually reboot your phone. It should reboot into the gears UI, then back into the OS. if it still fails, give you phone a rest for 5-10 minutes and retry(usually needed after a new rom flash).
4.When you're back in the phone OS, copy newndtksvc.dll and ndtksvc.dll to your documents folder on your phone through USB
5.Go to the app bar, then choose x50 series unlock. You should no longer receive the error about the acer service. Now click step 2 and follow the rest of the instructions from the app.
6.If you've taken the silent extras/advanced+info update, or updated that app manually, be sure to choose the option "Restore NDTK 950/XL" in the "x50 series unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
Instructions for older devices
1.Go to settings and turn on developer mode.
2.Sideload vcREG_1_6_W10.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose classic unlock
3.If you've taken the silent extras+info update, or updated that app manually, be sure to choose the option "Restore NDTK" in the "classic unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
Click to expand...
Click to collapse
dxdy said:
i still try to get "gears" :crying:
tried few times...
Click to expand...
Click to collapse
Double check this registry value using CustomPFD
HKLM\System\Platform\DeviceTargetingInfo
PhoneManufacturer
It must be in type (String) and it's value should be ACERINC to be able to deploy acer spkg.
If it's not you didn't do Step1 of VCreg correctly .
OK.
If you get 0x8024a110, you're probably on 14393 / anniversary update / Redstone1/whatever.
If so, you NEED to use iutool from the 14393 WDK. No ifs, no buts. Use that or you WILL get that error.
Here's a download of just the WP-tools (iutool, getdulogs, ffu creation etc etc) direct from MS: https://download.microsoft.com/down...5524A95/wdk/Installers/WP_CPTT_NT-x86-fre.msi
Mirrored it here just in case.
Works again for me.
I am stupid because "acer.service.acersystemservice.spkg" still installed after H.R.
titi66200 said:
Works again for me.
I am stupid because "acer.service.acersystemservice.spkg" still installed after H.R.
Click to expand...
Click to collapse
OH Yes guys . Good to say
After Hard reset you do not need to do many reboots because our ndtksvc is place in system32 (it didn't gone)
So you only need to go to x50 series page and check Live interop/cap unlock and apply it . that's it .
ngame said:
Double check this registry value using CustomPFD
HKLM\System\Platform\DeviceTargetingInfo
PhoneManufacturer
It must be in type (String) and it's value should be ACERINC to be able to deploy acer spkg.
If it's not you didn't do Step1 of VCreg correctly .
Click to expand...
Click to collapse
yes, ACERINC is there but still no luck...
---------- Post added at 02:11 PM ---------- Previous post was at 02:03 PM ----------
Wack0Distractor said:
OK.
If you get 0x8024a110, you're probably on 14393 / anniversary update / Redstone1/whatever.
If so, you NEED to use iutool from the 14393 WDK. No ifs, no buts. Use that or you WILL get that error.
Here's a download of just the WP-tools (iutool, getdulogs, ffu creation etc etc) direct from MS: https://download.microsoft.com/down...5524A95/wdk/Installers/WP_CPTT_NT-x86-fre.msi
Mirrored it here just in case.
Click to expand...
Click to collapse
installed and run iutool and now get gears!!!! thanks!!!
p.s.
interop is applied but.. still no use of AppDataManageTool or Adblock tool???
Great work!
Random question, probably a dumb one, but does this work on the M8FW? Or is it dependent on a x50 device exploit? Cause maybe I'm reading this wrong but it seems kinda universal
Thanks A lot!!!!
@dxdy
"Adblock tool" use "Nokia.SilentInstaller.Runtime" who seems not working on x50.
AlvinPhilemon said:
Great work!
Random question, probably a dumb one, but does this work on the M8FW? Or is it dependent on a x50 device exploit? Cause maybe I'm reading this wrong but it seems kinda universal
Click to expand...
Click to collapse
It's not intended for non-Microsoft/Nokia devices. NdtkSvc.dll is Nokia/Microsoft specific.....