This is soooo annoying, does anyone here get this error on some websites while browsing using the default shipped Android 2.2 browser?
Andriod browser dialog box mesg:
"Data connectivity problem
The page contains too many server redirects."
Example: http://www.yelp.com just does not work for me.
I am not sure if this is only happening to build 315 Dell Streaks. I did read somewhere else that going to build 318 fixes it, but I'd like to know how to fix this on 315 without going to 318.
Thanks in advance!
me4tux said:
This is soooo annoying, does anyone here get this error on some websites while browsing using the default shipped Android 2.2 browser?
Andriod browser dialog box mesg:
"Data connectivity problem
The page contains too many server redirects."
Example: http://www.yelp.com just does not work for me.
I am not sure if this is only happening to build 315 Dell Streaks. I did read somewhere else that going to build 318 fixes it, but I'd like to know how to fix this on 315 without going to 318.
Thanks in advance!
Click to expand...
Click to collapse
I get the same thing on stock 2.2 I have yet to figure out what it means or how to fix it.
You don't even have to root your phone to install baseband 318. As long as you are on baseband 305, 309, or 315 you won't even have to connect it to your computer.
Download (here is a Dell page with the link) the 318 file with your phone or with your computer and copy to the root of your SD Card. Browse to it with a file browser (you can use Quick Office) and tap on it.
If it doesn't do anything (if it does you'll be taken through the upgrade process) then rename the file to update.pkg.
Turn your phone off. Press the power button to turn your phone on and as soon as the LEDs light up hold BOTH volume buttons down. The phone will go into recovery mode. Use the volume controls to highlight the choice to install update.pkg and then press the camera button to select it.
The 318 update will be installed and your phone will reboot.
I believe that the second method will wipe your settings, so you'll have to set up your accounts and re-install your apps. When I did this I did a factory reset first so that I was doing the equivalent of a fresh install.
That's it - no drivers to install, no cables to connect (unless you copy the file to your phone with the cable), and you are technically running a stock phone.
This will not work if you have installed a custom recovery, you need a stock recovery on your phone to use an update.pkg. So this is perfect for those who don't want to mod their phone. You won't be able to tell the difference except that the redirect bug is gone.
me4tux said:
This is soooo annoying, does anyone here get this error on some websites while browsing using the default shipped Android 2.2 browser?
Andriod browser dialog box mesg:
"Data connectivity problem
The page contains too many server redirects."
Click to expand...
Click to collapse
RussianSolja said:
I get the same thing on stock 2.2 I have yet to figure out what it means or how to fix it.
Click to expand...
Click to collapse
DELL released a fix for this problem months ago on http://en.community.dell.com/support-forums/mobile-devices/f/3824/t/19353639.aspx
Download this file http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg from the Streak's web browser, and then follow the instructions to apply the update.
I tried both ways listed here, unable to update.
Norick Lim said:
I tried both ways listed here, unable to update.
Click to expand...
Click to collapse
Can you be more specific as to what happen when you try to upgrade? I just did the upgrade last night and did encounter a few problem myself but I got it done at the end so maybe I can be of help if you can be a little more specific about the problem.
Btw I'm on stock 318 update from above link and server re direct problem is gone
Worked like a charm, Thank you. All I did was download the file from my phone, then when it finished downloading I clicked on it from the notification bar and a menu poped up asking me to update and so I did. Now I no longer have that error poping up.
Sent from the phone killer of ALL phone's, Dell Streak!
eresse,pecisni
i am also facing the same issue
Related
Hi Everyone,
I started this thread because I really couldn't find the solution to the problem I am having with my Dell Streak. First of all I have the Dell Streak T-Mobile 3G version, it was working fine until yesterday, all of a sudden the screen wouldn't turn on. I did a Factory Reset and it worked fine after that. But I am unable to install anything in my Streak, If I download it from the Market I get message, "Download Unsuccessful" and If I download it off of internet using my browser I get the message, "Application Not Installed"
I have tried the solutions provided by people like Clearing Market Cache and stuff but honestly that doesn't work at all.
I don't know what could possibly affect only the Download and Install Manager in my Dell Streak. I am running Android 2.1 the leaked version on my Streak.
Any Help will be Greatly Appreciated.
I literally cannot install anything :'(
HELP!!!!!!
Use the version that was made for the streak. Problem solved.
But I cannot find the official O2 update file, and if I try to root it and install the new firmware, it says that the firmware is up to date and my streak restarts, it's very strange, no one seems to have this problem.
Sent from my SGH-T959 using XDA App
Sorry for the OT, but... I thought the Dell Streak would not work with US T-Mobile 3G, only 2G unless you are AT&T. Are you outside the US or is there really a version that works with US T-Mobile 3G now?
FYI: Did you change your GMail? Download unsuccessful happens if the 'GoogleID' is tied to a different GMail then the one you are using. I know this from hacking Chinese tablets and having to install a GoogleID. If that is the case, GTalk should not work either, but all other google apps are fine. Google for how to create a new key and change it. WARNING: It requires setting up the emulator and is a long process. The other option is just to reflash it, and if that doesn't work, reflash the stock rom.
Anyone knows why a Xperia10 mobile, turnos off when it tries to use google maps using the GPS?....After I activate the GPS and Try to go to maps, my Xperia10 turns off inmediatelly......
Someone Knows why it happens?
Regards
please any help....!
Go to applications, clear cache and start again.
If that doesn't work, reflash gapps.
idiay198 said:
Anyone knows why a Xperia10 mobile, turnos off when it tries to use google maps using the GPS?....After I activate the GPS and Try to go to maps, my Xperia10 turns off inmediatelly......
Someone Knows why it happens?
Regards
Click to expand...
Click to collapse
Are you using gingerbread or freex10?
im newbie about this stuff....Couple of question..
1) How Do I reflash gapps?...
2) If gingerbread or freex10 is a kind of application so then I do not have it. I have android system and all the user application I have is from android market...
Please help with question (1)
idiay198 said:
2) If gingerbread or freex10 is a kind of application so then I do not have it. I have android system and all the user application I have is from android market...
Please help with question (1)
Click to expand...
Click to collapse
Sorry but i just couldnt help it. XD
So much for the average Joe jumping over the Android version.
XD
Does your X10 switch off after it has crossed the 15% battery line?
idiay198 said:
Anyone knows why a Xperia10 mobile, turnos off when it tries to use google maps using the GPS?....After I activate the GPS and Try to go to maps, my Xperia10 turns off inmediatelly......
Someone Knows why it happens?
Regards
Click to expand...
Click to collapse
Are u using any application killer app? if so then plz check the auto killing list....
or repair with Sesus/reflash.....
idiay198 said:
im newbie about this stuff....Couple of question..
1) How Do I reflash gapps?...
2) If gingerbread or freex10 is a kind of application so then I do not have it. I have android system and all the user application I have is from android market...
Please help with question (1)
Click to expand...
Click to collapse
My dear friend,
You obviously have no clue about the whole system, until you get used to operating system, i would recommend that you dont start flashing just yet. let's get you up to date on the whole thing.
Android is an Operating System it helps your hardware interact with the software, Freex10 and gingerbread are like windows XP and windows 7, the latest version of android is 2.3.2 a.k.a Gingerbread, Freex10 is version 2.2.1.
Considering you dont know anything about flashing, i am assuming that you are using the stock OS supplied either 1.6 (Donut) or if you have updated the OS, 2.1 (Eclair). You can verify by going to settings-> About Phone -> Android Version.
Gapps refers to google apps like maps, voice dialer, google search, market etc.
For the time being what i want you to do is tell me which android version you are using and also how exactly this problem started.
Regards
E
Click on the thanks button if my post was of any use to you
No...it turns off when I open Maps o Wisepilot and try to get position using the GPS....few seconds after the app start running ,it switch off and switch on again...
I have android 2.1 updated.... I have an app named Juicedefender and MYLookOut...I delete memory booster app and Auto killer. The maps app star working rigth wit the GPS for a while but few minutes later the phone switch off again....
Try updating apps of it still does not work try flashing the phone by going to http://forum.xda-developers.com/showthread.php?t=920746 download the flasher and the firmware from http://www.mediafire.com/?sqv6274anzfzn2x
Extract the flasher zip file, open the program X10FlashTool.exe
If the firmware is of the extension .ftf
copy the firmware to the firmwares folder found in the flasher folder
if the firmware is not in the .ftf format
Advanced -> Bundle creation -> select the folder containg the firmware -> enter details required ( Device, Branding, version) -> select all the files present in the folder list (on the left side) and transfer to the firmware content -> click ok
-> click on flash -> select the firmware -> when asked connect the phone in flasher mode and you are good to go.
If you require busybox or root or xrecovery it will be found in the advanced menu.
Now update Maps and try again,
Regards
E
I was making some test and the problems happen also when I opne GPSTest app. Yesterday I used the SonyEricson Companion Software to repaire the phone (I think is like "reflash the phone"). After that I install superuser, busibox and I rooted my phone. Finally activate the GPS and try to test it using GPSTest app but it works fine for a couple of minutes and after that the phone turned off by itself.... Don´t u think the problem could be the GPS Hardaware instead of software?......By the way , It seems like the problems showed up after I updated my phone fromo android 1.6 to 2.1-updated....
the link you wrote for getting flash and firmware is for xperia X10i but my phone is X10a is there any problem with that? O I need to look for X10a?
idiay198 said:
I was making some test and the problems happen also when I opne GPSTest app. Yesterday I used the SonyEricson Companion Software to repaire the phone (I think is like "reflash the phone"). After that I install superuser, busibox and I rooted my phone. Finally activate the GPS and try to test it using GPSTest app but it works fine for a couple of minutes and after that the phone turned off by itself.... Don´t u think the problem could be the GPS Hardaware instead of software?......By the way , It seems like the problems showed up after I updated my phone fromo android 1.6 to 2.1-updated....
Click to expand...
Click to collapse
There is a possibility that it could be your hardware and since no other user is helping us out, i think its best you reflash using SEUS and DO NOT root the phone and go to a nearby service center and show it to them
Yea the firmware link i gave is for x10i, my bad i thought you had a x10i anyways it doesnt matter because i have heard of users who have installed x10i firmware on x10a anyways for the sake of safety of you mobile, in the flasher website, if you scroll down a bit you will find firmware for the x10a
Regards
E
Ok I reflash the way you told me...I selected the firmware for x10a ...everything was OK after I reflash the phone until I see that I do not have data conection anymore!!....I am in mexico and I was paying a data conection using EDge and 3G but after the reflash I can not havit both of them!!....now what_
Thank you so much...I fix the data conection problem...I need to restore my system settings backup. Now it seems to work properly incluiding the GPS....I am gonna test it the rest of the day to confirm is 100% ok....Thanks a lot
Always there to help a person in need bro. Take care and if everything is fine, i would recommed that you root the phone and try out all the features possible on the mobile, make it worth your money
Regards
E
idiay198 said:
Thank you so much...I fix the data conection problem...I need to restore my system settings backup. Now it seems to work properly incluiding the GPS....I am gonna test it the rest of the day to confirm is 100% ok....Thanks a lot
Click to expand...
Click to collapse
Did you go back to 1.6 or 2.1? Just in case that it is a hardware problem, i would suggest that you take the phone to your local dealer and ask for a replacement device.
Better act while you still have warranty.
I will do that....after I reflash the phone , the problem comes out again...Afer a couple of minutes I activate the GPS and opened the Maps, the phone crash, I mean it switch off...
Im gonna ask warranty....regards
mine use to do it but it stoped after the third time
I used qdl to upgrade my streak from 1.6 to 2.2. 2.2 but I often can't get out of "sleep mode". I press the power button and swipe the unlock and usually nothing happens (no buzz and no movement of the bar). Once I couldn't even power it down as holding the power button brough up the correct prompt but the screen was unresponsive. I had to remove the battery.
Is there some sort of resolution to this issue? My touch screen works fine once I've got the phone "awake".
Did you perform the OTA upgrade to v.318 of 2.2. after the QDL?
Forgive me but I'm not sure what you're asking but perhaps this will help you answer your question. I used the tutorial at this link:
streakdroid.com/?page_id=78
Waggle said:
Forgive me but I'm not sure what you're asking but perhaps this will help you answer your question. I used the tutorial at this link:
streakdroid.com/?page_id=78
Click to expand...
Click to collapse
OK.
The very last screen says success. From here you can upgrade to an official build, or one of the ROM's by DJ_Steve on Streakdroid.com.
If all you did was that tutorial, you are at build 308, which is unstable. You need to do the official upgrade to build 318, which is the upgrade you were waiting to do when you were waiting for Dell/AT&T when you were still on ver 1.6. You can now do that upgrade. Or you can continue on the the latest ROM upgrade courtesy of DJ_Steve.
From this page at streakdroid.com:
Using QDLTool will get you to a pre-release of v2.2. From here, you’ll want to upgrade to a newer release. The two options that people tend to choose from are to either go up to the official v2.2 ROM from Dell, or install DJ_Steve’s latest ROM.
Official ROM
If you want to go to the latest official ROM from Dell, simply set up your wifi connection, then go to http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg in the browser on the phone. You should be able to download and run to install the update.
Click to expand...
Click to collapse
To install the 318 build which fixes bugs in the build that QDLTool installs:
connect to a wifi network if you can
download the update directly to your phone from the link above
open the notification bar and select the download complete notification
you will be prompted to install the update
This method preserves your accounts and settings.
HELP VIDEO FOR ANDROID NEWBIES TO HELP THEM CHANGE ROM FROM 2.2 TO 2.3 CM7
http://www.youtube.com/watch?v=RULPBh4cDYU
On demand of some of the very new to android users, im posting a relatively easy to understood upgrade process from 2.2 froyo to 2.3 cm7(custom rom).
http://www.youtube.com/watch?v=MfnoUB8EFOI VIDEO LINK TO THE CM7 ROM DEMO
Remember both these roms(cm7 and miui) are rooted roms.It voids the warranty.
All credits given to the respective developers of the softwares/firmwares shown in this thread.Im just here to make the process more easy to understand.As developers say, DO IT ON YOUR OWN RISK
CM7 FLASHABLE FILE- http://www.mediafire.com/?f90c9utsp8luknd
GOOGLEAPPS PACKAGE- http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
COPY BOTH THESE FILES ON TO UR SDCARD(SAME FOLDER OR SEPERATE FOLDERS) BEFORE U PROCEED ANY FURTHER!
Download this file CLOCKWORK MOD- http://www.mediafire.com/?4mio3rwhhmjw5aq
steps to load cwm recovery
1-Load dell drivers on ur pc which we call adb drivers which i found on my dell mem card folder named ADB_Tethering_Driver.U will find these drivers on this forum also if you dont have it in.
2-setuo fastboot mode on your dell handset
Setting up fastboot:
Turn Device off
Move ringer to UP position
Hold down Power and Volume Down
This will show fastboot mode is on.
3-Download and install cwm
How to Install CWM?
Start recovery.exe and Extract all files
U will see file named Install CWM.bat.
Run that file and now plug ur dell venue to usb cable(venue is still in fastboot mode as we did it before)
Follow instructions on the dos screen to make ur dell venue load cwm recovery.
Your DELL Venue will reboot after installation is finished
4-Then you can see DELL logo after reboot.
Immediate you press Volume UP+DOWN
5-Once you're in the CWM recovery before you flash the ROM zip, you need to :
a. Wipe data/Factory Reset
b. Wipe Cache Partition
c. Wipe Dalvik Cache
Use vul + - key to toggle the menu and go to INSTALL UPDATE option in that menu.Again on next screen u will be asked to choose update file selection.Option name i forgot may be "INSTALL UPDATE FROM SDCARD".
Select the CM7 file which you downloaded earlier and copied to sdcard.Select and click CAMERA button to start installation.It will take about a minute or two to complete installation.
5-As installation finishes, you will see the msg - UPDATE COMPLETED.Then u need to go back to the previous menu and select REBOOT SYSTEM NOW.Finish that step.
Thats done!You are into the world of smoother, faster , interactive dell venue cm7 2.3 rom!
You wont be able to cnnect to any of google applications at this time.
To enable google account and apps, u need to follow all the earlier steps and again go into the cwm recovery mode and install the GAAP packge which u have downloaded with cm7.The process will be same...update from sdcard,select gaap file and reboot.It should not be a big deal.
option2:Also u can go to cm7 settings menu and find option to boot into cwm recovery in dell phone itself(no need of pc to run cwm).However u need the GOOGLEAPPS FLASHABLE file on ur sdcard to flash it in cwm recovery in any case...option1 or option2.
Same process needs to be followed to install another update for ussd/mmi codes.
Download this package http://mirror2.streakdroid.com/manii/misc/USSD Fix/update-USSDfix-2.zip and flash it in same way as gapps was done.This would solve ur problem of ussd codes( * # kind of calls) as well.
NOTES:
ONE MAY FACE REDUCED BATTERY BACKUP IN THIS CM7 ROM,
I HAVE FOUND A WAY FOR IT, BY USING SETCPU application WHICH COMES IN THIS ROM AS BUNDLED.
MY SETCPU SETTINGS ARE:
1-START ON BOOT CHECKED
2-PROFILES ENABLED CHECKED. TWO PROFILES ADDED FIRST IS "SCREEN OFF" SET TO "POWERSAVE" AND SECOND PROFILE "IN CALL" SET TO "CONSERVATIVE"
*IF U GET STUCK AT BOOT AFTER INSTALLING ZIP OF CM7 FILE FROM CWM, U SHUD SIMPLE FOLLOW 2 STEPS. DO AL DATA WIPE,CACHE WIPE AND DATA RESET.THEN FLASH CM7 AGAIN WITHOUT RESTARTING PHN.THIS WILL SOLVE BOOT LOOPING PROBLEM IF ARISES.
THESE SETTINGS GIVE ME EXTRA BATTERY BACKUP OF ABT 3/4HOURS.
hirentherock555 said:
On demand of some of the very new to android users, im posting a relatively easy to understood upgrade process from 2.2 froyo to 2.3 cm7(custom rom).
Remember both these roms(cm7 and miui) are rooted roms.It voids the warranty.
All credits given to the respective developers of the softwares/firmwares shown in this thread.Im just here to make the process more easy to understand.As developers say, DO IT ON YOUR OWN RISK
CM7 FLASHABLE FILE- http://www.mediafire.com/?f90c9utsp8luknd
GOOGLEAPPS PACKAGE- http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
COPY BOTH THESE FILES ON TO UR SDCARD(SAME FOLDER OR SEPERATE FOLDERS) BEFORE U PROCEED ANY FURTHER!
steps to load cwm recovery
1-Load dell drivers which we call adb drivers which i found on my dell mem card folder named ADB_Tethering_Driver.U will find these drivers on this forum also if you dont have it in.
2-setuo fastboot mode on your dell handset
Setting up fastboot:
Turn Device off
Move ringer to UP position
Hold down Power and Volume Down
This will show fastboot mode is on.
3-Download and install cwm
How to Install CWM?
Download this file - http://www.mediafire.com/?4mio3rwhhmjw5aq
Start recovery.exe and Extract all files
U will see file named Install CWM.bat.
Run that file and now plug ur dell venue to usb cable(venue is still in fastboot mode as we did it before)
Follow instructions on the dos screen to make ur dell venue load cwm recovery.
Your DELL Venue will reboot after install finished
4-Then you can see DELL logo
Immediate you press Volume UP+DOWN
5-Once you're in the CWM recovery before you flash the ROM zip, you need to :
a. Wipe data/Factory Reset)
b. Wipe Cache Partition
c. Wipe Dalvik Cache
Use vul + - key to toggle the menu and go to INSTALL UPDATE option in that menu.Again on next screen u will be asked to choose update file selection.Option name i forgot may be "INSTALL UPDATE FROM SDCARD".
Select the CM7 file which you downloaded earlier and copied to sdcard.Select and click CAMERA botton to start installation.It will take about a minute or two to complete installation.
5-As installation finishes, you will see the msg - UPDATE COMPLETED.Then u need to go back to the previous menu and select REBOOT SYSTEM NOW.Finish that step.
Thats done!You are into the world of smoother, faster , interactive world of dell venue cm7 2.3 firmware!
You wont be able to cnnect to any of google applications at this time.
To enable google account and apps, u need to follow all the earlier steps and again go into the cwm recovery mode and install the GAAP packge which u have downloaded with cm7.The process will be same...update from sdcard,select gaap file and reboot.It should not be a big deal.
Click to expand...
Click to collapse
Thanks
Super cool and simple explaination quite helpful. Will try this.
But are there any bugs in this update?
Also if possible is there any rollback method if we get stuck or mobile bricks?
I did not find any bugs in cm7 as yet...havent tried miui rom yet.
CM7 is supercool rom.You would love it.Its 10times better than the 2.2 inbuilt rom dell give.
Rollback would require stockroms(which r available on his forum i think).
Unbricking method post is also given in this forum.Check and do the diligence at ur own risk.
hirentherock555 said:
I did not find any bugs in cm7 as yet...havent tried miui rom yet.
CM7 is supercool rom.You would love it.Its 10times better than the 2.2 inbuilt rom dell give.
Rollback would require stockroms(which r available on his forum i think).
Unbricking method post is also given in this forum.Check and do the diligence at ur own risk.
Click to expand...
Click to collapse
Worked as said
Thanks a ton mate
Also just trouble was needed to download google apps which was never done by me ever
Asphalt 6 HD roxs now
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
hirentherock555 said:
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
Click to expand...
Click to collapse
Yes flashed with google apps zip
Camera is good to very good 8 MP
HD video also is good
i have updated the step by step process with additional mmi code solution also into the last paragraph.U can check it.
I dnt knw why, my cam is giving bad results with backcover on and better result when i take cover off.Can u check in ur cam result of both ways? and let me knw?
hirentherock555 said:
i have updated the step by step process with additional mmi code solution also into the last paragraph.U can check it.
I dnt knw why, my cam is giving bad results with backcover on and better result when i take cover off.Can u check in ur cam result of both ways? and let me knw?
Click to expand...
Click to collapse
Sure
Guess you must try cleaning the cover lence once
Still will update you on the same
hirentherock555 said:
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
Click to expand...
Click to collapse
took it to test today
used it as normal as i always do
but battery drain observed was high than stock
half a day by 3 noon my fone waz 20 %
unplugged at 7am
on stock at this time i would be 60 %
just use opera and whatsapp
any suggestions?
will clearing battery stats help?
heard it makes things worst
here are some suggestions:
1: in stock rom when wifi is on and connected to a router, and u went away from in wifi area, it will stop searching for wifi.When u will enter in same wifi zone again, u wont get auto connected to wifi.
Whereas in cm7, after leaving wifi area with wifi on(and connected), upon returning to wifi area again, u will find venue connected to that wifi network automatically.
This means wifi is continuously looking for connection in cm7 but not in stock rom.Make appropriate changes to try and enhance battery life.
2:SETCPu application
Use this application to save battery.I used it today and felt the difference.
3:Set brightness levels to zero rather than auto.
We have to change our habits of using phones to save battery.Thats a hard fact!
Above all should help though.
hirentherock555 said:
here are some suggestions:
1: in stock rom when wifi is on and connected to a router, and u went away from in wifi area, it will stop searching for wifi.When u will enter in same wifi zone again, u wont get auto connected to wifi.
Whereas in cm7, after leaving wifi area with wifi on(and connected), upon returning to wifi area again, u will find venue connected to that wifi network automatically.
This means wifi is continuously looking for connection in cm7 but not in stock rom.Make appropriate changes to try and enhance battery life.
Click to expand...
Click to collapse
I am not using wif fi
I am on 2G EDGE mate
2:SETCPu application
Use this application to save battery.I used it today and felt the difference.
Click to expand...
Click to collapse
Any suggested settings?
3:Set brightness levels to zero rather than auto.
We have to change our habits of using phones to save battery.Thats a hard fact!
Click to expand...
Click to collapse
Thats not an issue done that
1ST CLICK ON SETCPU - RUN ON BOOT CHECK
GO TO PROFILES AND ADD 2 PROFILES
1ST SELECT "SCREEN OFF" AND SELECTOR SCALLING "POWERSAVE"
2ND SELECT "IN CALL" AND SELECT SCALLING "CONSERVATIVE"
iM USING THESE SETTINGS TODAY.
cELL FULLY CHARGED AND DISCONNECTED POWER AT 8.30AM MORNING.
iTS 5PM NOW AND BATTERY LEFT IS STILL56%
i HAVE WIFI ALWAYS ON AS I HAVE ROUTER AT HOME.
i HAVENT USED MUCH OF INTERNET THOUGH.
AS PER BATTERY USE MENU TLL NOW FROM MORNING,
DISPLAY IS USED FOR 1.3HRS.
VOICE CALL DATA SHOWS 52MINUTES
WIFI USED FOR 8.30 HOURS AS WELL.
i THINK ITS DECENT BATTERY BACKUP IF I KEEP THESE SETTINGS.
YES PERFORMANCE SEEMS TO BE SLIGHTLY LESS WITH SETCPU.ABT 10-15% LAG IN PERFORMANCE.BUTS I WILL TAKE THAT.
hirentherock555 said:
1ST CLICK ON SETCPU - RUN ON BOOT CHECK
GO TO PROFILES AND ADD 2 PROFILES
1ST SELECT "SCREEN OFF" AND SELECTOR SCALLING "POWERSAVE"
2ND SELECT "IN CALL" AND SELECT SCALLING "CONSERVATIVE"
iM USING THESE SETTINGS TODAY.
cELL FULLY CHARGED AND DISCONNECTED POWER AT 8.30AM MORNING.
iTS 5PM NOW AND BATTERY LEFT IS STILL56%
i HAVE WIFI ALWAYS ON AS I HAVE ROUTER AT HOME.
i HAVENT USED MUCH OF INTERNET THOUGH.
AS PER BATTERY USE MENU TLL NOW FROM MORNING,
DISPLAY IS USED FOR 1.3HRS.
VOICE CALL DATA SHOWS 52MINUTES
WIFI USED FOR 8.30 HOURS AS WELL.
i THINK ITS DECENT BATTERY BACKUP IF I KEEP THESE SETTINGS.
YES PERFORMANCE SEEMS TO BE SLIGHTLY LESS WITH SETCPU.ABT 10-15% LAG IN PERFORMANCE.BUTS I WILL TAKE THAT.
Click to expand...
Click to collapse
Thanks will try that
Also wanted to know can we flash dell stage UI 1.6 in this rom?
It is there here somewhere but I dont know as havnt tried
No idea abt stage ui as i really didnt like it and neither want it.
U amy try searching forum for tht.
Google Apps with audio/video ability
Gapps with gtalk audio/video ability
http://goo.im/gapps/gapps-gb-20110828-newtalk-signed.zip
Has anyone tried the above?
havent trid.also the link u shown there does not work.
Try uploading on medafire.
It would be great if all users here can press SUBMIT THREAD button on top of the page so that this thread can feature on xda home page and people get to know about it.
talk2 (the one with video chat) wont fully work on the V because it has no FFC.
It might otherwise work to recieve video/voice though, but it cant send video.
TheManii said:
talk2 (the one with video chat) wont fully work on the V because it has no FFC.
It might otherwise work to recieve video/voice though, but it cant send video.
Click to expand...
Click to collapse
Wont the back camera work for this?
just curious
Did the setcpu settings help u?
hirentherock555 said:
Did the setcpu settings help u?
Click to expand...
Click to collapse
Was on your settings before I re formatted my cell.
Was going okish..
But when I reformatted it, made sure the battery was full and then wiped battery stats.
Now I am onn without setcpu, goes for 10 to 13 hrs max with few calls, whatsapp always on, mails, etc.
Will go on with this for a month. Then check with setcpu if it gives any difference.
Shortly after Team DRH's last update for their ICS 1.2 I installed it no problem and it ran for a few weeks. Then I left the tablet alone for a week or so and when I turn it on now the wifi is not working, it just says "turning on wifi" but never actually does. I've followed the reflash instructions here: http://forum.xda-developers.com/showpost.php?p=23147934&postcount=4 and I can re-install ICS endlessly. But even after following those instructions, and even after RayWaldos NVFlash for dummies, it still always says "turning on wifi" but doesn't.
When, during the above flashing, I let the stock tapntap boot, wifi works no problem. It's only when i install a ROM that it stops working. I even tried installing Gtabcombover and it gave me the same "turning on wifi" problem.
I did try searrching the forums, but I see no mention of this anywhere.
Thanks.
If I can be more to the point: does anyone know of a way to completely reflash stock everything? I thought I was doing that, but obviously not enough.
Or do I need to crack open my case and push that Dirty Little reset button?
Slightly Askew said:
If I can be more to the point: does anyone know of a way to completely reflash stock everything? I thought I was doing that, but obviously not enough.
Or do I need to crack open my case and push that Dirty Little reset button?
Click to expand...
Click to collapse
I was able to use the DHR NUFLASH.. It worked real well for me.. download the right file (bootloader 1.1 or 1.2) to your pc, for your g-tab.hook up your USB cable Turn on your tab wile holding your volume (-) key , the logo will come on and then go black. Then go to the nuflash- win file, you downloaded to your pc and run.. The instructions are on the DHR site are vary good I read them a few times before I tried. Its worked great for me.. I'm a noob. Lets just say its just about makes the gtab un-brickable...
Sent from my G Harmony v2.8 using xda app-developers app
graftonrod said:
I was able to use the DHR NUFLASH. . .
Click to expand...
Click to collapse
Well the good news is that after reading your post I went straight to the DRH website and lo and behold they had just posted Beta 1.3 that morning. I redownloaded their Full Stock CWM 5504 NVFLASh file even though I already had it, and the Beta 1.3.
I flashed the stock file and let it boot just like they said but the setup process began a FC loop and would not complete. I simply rebooted and the setup was able to complete. The I installed the Beta 1.3 with no Gapps and it worked like a charm. Wifi was working and everything, except there was no Market. So I did a wipe/FR and installed again this time with Gapps and everything is back, wifi, market, all good. And I have noticed that it all seems to work a ton faster and smoother.