Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
tcoker79 said:
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
Click to expand...
Click to collapse
Nope, its got nothing to do with the rom you are running. The G-Tab is hardware limited to wireless G, no N. I was a little dissapointed by that too when I researched it to buy, but frankly G is fine for streaming vids, music, etc.
Most N routers support dual mode for legacy G devices so I'd suggest turning this on. Additionally if your router does not broadcast its SSID you'll have to manually type it in when setting up the wireless connection on your tab...
tcoker79 said:
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
Click to expand...
Click to collapse
My upstairs router is a WRT610N. My GTab works fine with it. The Gtab comes with a single wireless radio (does not support MIMO) that supports the Wireless-N (802.11n) draft standard.
The Gtab will only see the 2.4GHz band, not the 5GHz band.
Butch1326 said:
My upstairs router is a WRT610N. My GTab works fine with it. The Gtab comes with a single wireless radio (does not support MIMO) that supports the Wireless-N (802.11n) draft standard.
The Gtab will only see the 2.4GHz band, not the 5GHz band.
Click to expand...
Click to collapse
Oops, you're right, thats what I was trying to say, no 5Ghz frequency.... While it connects fine to my N router, it really isn't true N or any speed near it.
powercrazy said:
Nope, its got nothing to do with the rom you are running. The G-Tab is hardware limited to wireless G, no N. I was a little dissapointed by that too when I researched it to buy, but frankly G is fine for streaming vids, music, etc.
Most N routers support dual mode for legacy G devices so I'd suggest turning this on. Additionally if your router does not broadcast its SSID you'll have to manually type it in when setting up the wireless connection on your tab...
Click to expand...
Click to collapse
I have my routers on the 2.4GHz band setup for Wireless-N only, and my Gtab connects to them just fine. Both on my E4200 and my WRT610N.
powercrazy said:
Oops, you're right, thats what I was trying to say, no 5Ghz frequency.... While it connects fine to my N router, it really isn't true N or any speed near it.
Click to expand...
Click to collapse
Yeah, I only see 72Mbit/second, but someone else reported that they saw 270 Mbit/second connecting to their Netgear router.
I agree with you. I haven't seen the throughput, especially during large file transfers.
So once again the marketing monster strikes. Clearly states wireless N but only in the 2.4 Ghz range. That's fine just wanted to be sure there wasn't something I was missing. Thanks to everyone who replied.
tcoker79 said:
So once again the marketing monster strikes. Clearly states wireless N but only in the 2.4 Ghz range. That's fine just wanted to be sure there wasn't something I was missing. Thanks to everyone who replied.
Click to expand...
Click to collapse
N doesnt specify any frequency.
True but when anyone sets up a wireless N router on the 5GHz band only...it will not be found by the G-Tablet. I have mine set up with both 2.4GHz and 5GHz so all of my equipment is covered.
I'm using the WRT310N and I have mine set to Wireless N only.
Standard 20MHz Channel @ 2.412GHz
GTAB Connects.
Hell, if you live in an area where you can use all 14 2.4GHz channels you can even connect on channel 14. A lot less interference.
My gTab can see my N-network but it disconnect immideatly after I try to connect. I have 2 routers; 1 upstairs with N only, an done downstairs with both N & G. I'm mostly upstairs but I have to connect to the G-router which only gives me one bar.. But it works just fine, although full speed N would have been nice for Winamp Wifi-sync and transfering Movies etc
Mine connects to DLink Dir655 2.4Ghz rounter using N protocol but gTab radio definitely not a MIMO one.
Best download speed is about 2.7 - 3.0 MByte per second when using FTP, and only 1.9 - 2.0 MByte per second when using SMB protocol.
My laptop can get upload/download speeds around 9-10 MByte per second using same router and 2.4Ghz MIMO N wireless card.
Related
Like the title says who got a working N connection with the 101. I can only connect at 54. Using a netgear WNDR3700 router and WPA2 AES
Maurice
I'm in the exact same position. My N1 and my eeePC both connect at speeds greater than 54mbps, but the A101 will not go any higher than 54mbps...
I was running a speedtest compare between my Evo and the 70i and noticed a big difference in speed, ~3Mb in favour of the Evo. Also noticed that its only connecting at g and not n. Is there some sort of governing going on?
are we talking connecting to an n router or connecting at n speeds?
godashram said:
are we talking connecting to an n router or connecting at n speeds?
Click to expand...
Click to collapse
Connecting at N speeds.
However, I did set my router to N only mode and I was unable to obtain an IP address.
e4xda said:
Connecting at N speeds.
However, I did set my router to N only mode and I was unable to obtain an IP address.
Click to expand...
Click to collapse
does you router use 2.4Ghz or 5Ghz for n? what does the archos support?
My router is 2.4-2.5 ghz running DD-WRT. I checked the tech specs on Archos page but I don't see any info on what frequency they are using, just says it supports WiFi b/g/n.
http://www.archos.com/products/ta/archos_101it/specs.html?country=us&lang=en
e4xda said:
I checked the tech specs on Archos page but I don't see any info on what frequency they are using, just says it supports WiFi b/g/n.[/QUOT]
The Archos is 2.4 GHz only. However that doesn't matter, because I have both 2.4 and 5 GHz on my netgear WNDR3700. All my other devices with N are connecting at N speed to it.
I think the problem is the wifi driver from the archos, unless someone can show me that he is connected at N speed with his archos.
Maurice
Click to expand...
Click to collapse
It better not be false advertising... Or a fix better be made soon.
Sent from my HTC Legend using XDA App
i have a wndr3700 wireless router and using speedtest from the market i get
7.60 Mbps Down
3.41 Mbps Up
looks pretty fast N or not
I only have 5 GHZ N AP so I had to hook up a 2.4 GHZ "N" router that I have, but it is not really N, could never get 300Mbps connectoin on my laptop, but i get 54Mbps on the Archos, it seems fast enough to me.
not working
Very slow no N
I have 74 Mbit wireless connection with my 101 and an WRT320N-EU, so N does work in my situation
Emailed Archos regarding this issue, below is their answer.
"
Archos
Dear Customer,
We are working on this issue.
Kind Regards,
Archos Technical Support
Thank you for choosing Archos products.
We also have at your disposal on our website, FAQ's, firmwares and drivers.
Feel free to visit our it at website : http://www.archos.com
Please note that for your convenience we also saved a full copy of the manual on your Archos under the data folder."
The phone says its wireless N able but I can't seem to get it to see my wireless N network over 5GHz. It sees my wireless G network over 2.4GHz fine but not wireless N over 5GHz evidently.
Anyone gotten theirs to connect to N networks? If so what were your configs for channel, and all that if you mind me asking?
I haven't had any issue connecting to wireless n. I'm connected at home, girlfriends and work. My router is channel 11, gf is channel 6. I don't know about work.
Night·Fire said:
I haven't had any issue connecting to wireless n. I'm connected at home, girlfriends and work. My router is channel 11, gf is channel 6. I don't know about work.
Click to expand...
Click to collapse
If your on channel 11 then your only on 2.5GHz not 5GHz. do me a favor and while your connected on your Evo3D go into wireless settings and click on the network that your connected to and tell me the speed it shows. Willing to bet its only 65Mbps, which is because your on 2.5GHz and not 5GHz.
sgt. slaughter said:
The phone says its wireless N able but I can't seem to get it to see my wireless N network over 5GHz. It sees my wireless G network over 2.4GHz fine but not wireless N over 5GHz evidently.
Anyone gotten theirs to connect to N networks? If so what were your configs for channel, and all that if you mind me asking?
Click to expand...
Click to collapse
There is a difference between A/N and B/N.
B/N is 150Mbs + and has better penetration than A/N. You're asking the wrong question.
Yes, you can connect to a B/G/N network. No you cannot connect to a 5.0GHz anything network.
NoSoMo said:
There is a difference between A/N and B/N.
B/N is 150Mbs + and has better penetration than A/N. You're asking the wrong question.
Yes, you can connect to a B/G/N network. No you cannot connect to a 5.0GHz anything network.
Click to expand...
Click to collapse
So this has a single antennae then correct just like the Evo4G did which is why it couldn't connect to 5.0GHz networks?
j/w b/c I can't get past 65Mbps on the connection while I thought the 3D had a better wireless card in it than the 4G. Its not my router as I get boost up to 130Mbps on my laptop connected to same SSID at times.
Just a bummer thought we were getting a true wireless N capable phone.
This makes me wonder even more why they took out N capability in the Evo4G update and never added N to the spec sheet.
A single antenna is not what makes it 2.4GHz vs 5GHz. The single antenna basically limits it to Wireless N, 150Mbps vs 300Mbps. The 5GHz is just the frequency that it travels over, and most mobile devices won't do 5Ghz, and will only have a single antenna.
simpat1zq said:
A single antenna is not what makes it 2.4GHz vs 5GHz. The single antenna basically limits it to Wireless N, 150Mbps vs 300Mbps. The 5GHz is just the frequency that it travels over, and most mobile devices won't do 5Ghz, and will only have a single antenna.
Click to expand...
Click to collapse
So your able to connect over 2.4GHz freq and your evo3d shows its connected at 150Mbps??
I have a top of line netgear full dual band router here so I know its not that, esp seeing as my pc connects at 150Mbps over the 2.4GHz band. I'm checking this by just clicking on the SSID after connected on the Evo3D, or checking Status on my PC's connection.
Dont get why I'm always showing 65Mbps on the Evo3D. Would of thought that since they are publishing that they support Wireless N as opposed to the Evo4G who only had 1 antennae, that I would connect at higher speed than the Evo4G. did
sgt. slaughter said:
So your able to connect over 2.4GHz freq and your evo3d shows its connected at 150Mbps??
I have a top of line netgear full dual band router here so I know its not that, esp seeing as my pc connects at 150Mbps over the 2.4GHz band. I'm checking this by just clicking on the SSID after connected on the Evo3D, or checking Status on my PC's connection.
Dont get why I'm always showing 65Mbps on the Evo3D. Would of thought that since they are publishing that they support Wireless N as opposed to the Evo4G who only had 1 antennae, that I would connect at higher speed than the Evo4G. did
Click to expand...
Click to collapse
There's nothing more misleading than the whole "link speed". I've never seen an actual 150Mbs off of my A/N "300Mbs" connection, and that's with the laptop sitting 4ft from the router. The phone can't utilize anywhere near that bandwidth, and I'm willing to bet that even if your internet is several MB/s, you won't actually find a website to give you more than 1.2MB/s. Microsoft is one of the few that I know of that can really dish the data out.....but how often are you downloading massive updates?
NoSoMo said:
There's nothing more misleading than the whole "link speed". I've never seen an actual 150Mbs off of my A/N "300Mbs" connection, and that's with the laptop sitting 4ft from the router. The phone can't utilize anywhere near that bandwidth, and I'm willing to bet that even if your internet is several MB/s, you won't actually find a website to give you more than 1.2MB/s. Microsoft is one of the few that I know of that can really dish the data out.....but how often are you downloading massive updates?
Click to expand...
Click to collapse
Not concerned with internet speed and more so looking at my internal network speeds for file transfers and such.
I get that it can be missleading but do not get that if the Evo4G which has a less powerful card than the 3D evidently that the 4G and 3D show the same link speeds.
I prob need to check the specs on each phones card really though the more i think about it b/c most i have been going off of is word of mouth like the 4G only having 1 antennae and such. No clue if the 3D has 2 or not.
sgt. slaughter said:
Not concerned with internet speed and more so looking at my internal network speeds for file transfers and such.
I get that it can be missleading but do not get that if the Evo4G which has a less powerful card than the 3D evidently that the 4G and 3D show the same link speeds.
I prob need to check the specs on each phones card really though the more i think about it b/c most i have been going off of is word of mouth like the 4G only having 1 antennae and such. No clue if the 3D has 2 or not.
Click to expand...
Click to collapse
You'll probably find that the WiFi and BlueTooth antenna are shared....and if a phone has an FM rx, it too will use that antenna. Not likely to find a cellular with dual WLAN antennas.....they're not really built to be a dedicated WIFI anything.
If you're concerned about xfer rates on the phone, yank the SD card out and put it in a reader. That's the fastest way to get data to the phone, followed by hooking up the phone via USB. The phone has no use for WLAN data rates above 15Mb/s. If you're transferring movie files, use the USB connection method. Outside of that, don't sweat it. I honestly couldn't see someone moving GBs worth of data on a constant basis with the phone.....and if you are, sounds like you should look at something with larger storage like a Tablet PC.
NoSoMo said:
You'll probably find that the WiFi and BlueTooth antenna are shared....and if a phone has an FM rx, it too will use that antenna. Not likely to find a cellular with dual WLAN antennas.....they're not really built to be a dedicated WIFI anything.
If you're concerned about xfer rates on the phone, yank the SD card out and put it in a reader. That's the fastest way to get data to the phone, followed by hooking up the phone via USB. The phone has no use for WLAN data rates above 15Mb/s. If you're transferring movie files, use the USB connection method. Outside of that, don't sweat it. I honestly couldn't see someone moving GBs worth of data on a constant basis with the phone.....and if you are, sounds like you should look at something with larger storage like a Tablet PC.
Click to expand...
Click to collapse
I hear ya im aware of outside options. I just thought that since this phone is supporting wireless N fully then the link speeds would be able to be higher than the link speed on the 4G.
But again like i said before i really need to get down to it and look at the documentation of the chips used on the 4G and 3D to see what differences there are.
EDIT:
NVM makes sense now. both phones have the same Broadcom chip inside. the Broadcom BCM4329.
BUT whats odd is that from what i read that chip only supports bluetooth 2.1 while we supposedly have 3.0 on this phone. Also interesting is the chip supports 5GHz dual band. here
I don't think my 3D has connected to 5GHz on my home network. I have a dual-band N router, and I have 5GHz as the primary, so my laptop and media player connect to that immediately.
I only noticed my 3D on the 2.4GHz part of my network. I haven't tried manually connecting it to the 5GHz band, but if it could, I would have assumed that it would automatically.
sgt. slaughter said:
EDIT:
NVM makes sense now. both phones have the same Broadcom chip inside. the Broadcom BCM4329.
BUT whats odd is that from what i read that chip only supports bluetooth 2.1 while we supposedly have 3.0 on this phone. Also interesting is the chip supports 5GHz dual band. here
Click to expand...
Click to collapse
Well, when it comes to "N", there are several factors that come into play. One, the wireless chip MAY be able to support the A frequencies, you're talking about additional code to make it work with rest of the phone. Antenna isn't an issue since 2.4 is half of 5.0. A 1/2 wavelength 2.4GHz antenna, is about a full length 5GHz antenna if memory serves me correctly (that and the 36hrs I've been up). Another thing that comes into play as far as the bandwidth is concerned is channel width. There is also MIMO too....but the phones will be basic of basic. The fact that N support is enabled is surprising, but it's most likely just a selling point. It supports the most basic N, with the smallest channel width, and clearly MIMO isn't supported. Routers can be configured to B or G or N only, sometimes combos of them as well. I use DDWRT on my routers and it allows virtually everything to be manipulated. Either way though, there is a lot of features to cram into the small area that is the cellphone, and if you ever take a look at a full featured ABGN mini pci-e WLAN card, you will see that there is still a decent size to it when all the features are present.
Ok, I think that's about all I can add to the topic, LOL
N is the technology that delivers faster then G speeds using MIMO packets.
A is the technology that frees up the crowding of B/G Networks by running on 5GHZ as opposed to 2.4GHZ
BGN Refers to a 2.4GHZ spectrum capable of running the N packets.
ABG Refers to a 2.4GHZ or 5GHZ spectrum capable of running the B/G packets.
ABGN Refers to a 2.4GHZ or 5GHZ spectrum capable of running BGN packets.
It's retarded how they label it. LOL but you can run N on 2.4 spectrum or 5GHZ spectrum.
Most mobile devices only see 2.4GHZ spectrum since they only have one antenna.
darkflame said:
N is the technology that delivers faster then G speeds using MIMO packets.
A is the technology that frees up the crowding of B/G Networks by running on 5GHZ as opposed to 2.4GHZ
BGN Refers to a 2.4GHZ spectrum capable of running the N packets.
ABG Refers to a 2.4GHZ or 5GHZ spectrum capable of running the B/G packets.
ABGN Refers to a 2.4GHZ or 5GHZ spectrum capable of running BGN packets.
It's retarded how they label it. LOL but you can run N on 2.4 spectrum or 5GHZ spectrum.
Most mobile devices only see 2.4GHZ spectrum since they only have one antenna.
Click to expand...
Click to collapse
Actually, abg means that it can use the 802.11a, 802.11b, or the 802.11g standard, and abgn adds 802.11n. 802.11A is a very different standard than N, and is incompatible with the others, whereas B, G, and N are forwards and backwards compatible, except for N going over a 5Ghz signal, which still isn't compatible with A.
All that said, I'm pretty sure that this phone will only support 802.11n over 2.4GHz at 150Mbps. I don't have the phone yet, but I'm basing this off the fact that nearly all portable devices that use 802.11n are that way. At least I haven't seen one that is capable of either using 5GHz, or 300Mbps.
My EVO 3D does NOT see my 5 GHz N network.
ZachPA said:
My EVO 3D does NOT see my 5 GHz N network.
Click to expand...
Click to collapse
I have the exact same issue. My laptop sees my 5ghz ssid, but my MT4G doesn't. The weird thing is, I've flashed several ROMS to my phone, and none see it. I did however, flash the stock ROM (froyo 2.2.1) today for the sh*ts and giggles of it, and it saw the N ssid! WTF.
All the specs claim the Nook Tablet and Color Nook have 802.11n. But I can't see any of my n access points on either device, either in the wifi setup, or in tools such as wi-finder.
So do these support wireless n? If so, how do I use it?
jarome1 said:
All the specs claim the Nook Tablet and Color Nook have 802.11n. But I can't see any of my n access points on either device, either in the wifi setup, or in tools such as wi-finder.
So do these support wireless n? If so, how do I use it?
Click to expand...
Click to collapse
Hmm...what WAP (wireless access point) device do you have? i.e. model.
In other words, when you say 'any of your n access points', what device
are those declared on?
And, are you saying you CAN get on in 'G' mode, but just NOT in 'N' mode?
Or, that you can't get on your wifi at all?
I'm pretty sure that my router is set to N only and I have no issue connecting. I have a Netgear WNR3500L.
I have a WNDR3700. It is set up for both G and N, with different SSIDs. G works fine, but I cannot see any of the (non-hidden) N SSIDs.
I believe it is has 802.11n but only on 2.4 ghz networks, not 5.0 ghz networks.
The NT, like most other mobile toys, have 802.11n 2.4GHz. Hence its "b/g/n" designation. It does not have 802.11n 5.0GHz aka dual-band. Tabs that are dual-band are designated as "a/b/g/n". iPad, Samsung GT 10/8.9/7+, Xoom, have dual-band. Most tabs only have 2.4GHz.
Sounds like your 3700 is set up for N to use 5GHz band, and G using 2.4GHz. That's fine. Throughput should be the same when using 2.4GHz, whether it's G or N. Ignore the reported link rate. But if you must have that N letter, then set your 2.4GHz radio to N as well.
@liquidzoo
>I have a Netgear WNR3500L.
The WNR3500L is a single-band (2.4GHz) router. The 'D' in WNDR3700 stands for dual-band, as in "wireless network dual-band router".
e.mote said:
@liquidzoo
>I have a Netgear WNR3500L.
The WNR3500L is a single-band (2.4GHz) router. The 'D' in WNDR3700 stands for dual-band, as in "wireless network dual-band router".
Click to expand...
Click to collapse
True, however there was nothing (at the time) that specified whether it was dual or single band N that was being talked about.
It was the cheapest gigabit wireless router that I could find. No reason to upgrade right now.
I was wondering if any prime owners tryed to connect on a N-Only wifi?? on the box it says a/b,g,n wireless but when i try to set my wifi to N-Only, i can see the network but theirs no way the prime is connecting to it. I have to switch it back to either Mixed or G/N Mixed, and then im able to connect with a max connectivity with router of 54mbps. This problem was present before and after ICS update, my router is a Asus RT-N12 (tryed with stock firmware, updated stock firmware and with DDWRT). I Would like to know if any of you guys tryed this out I feel i'v been kinda scammed
PS. (I checked out on Q&A for the prime and couldnt find any post related to this if you guys know there is already one, please just give me the link i'll continu posting on the other thread thanks)
I can't connect to my "N" router either. Mine doesn't even show up in my TF.
is it a TF prime or the first one?
N-5ghz is not supported, putting it in 2.4Ghz mode should work (at least, it does on mine... whether there's a difference or not is another thing)
I can connect my prime to my router with N only as long as its on 2.4GHZ and between channels 1-11. I wish I could pick up 12-14 because I live in an apartment complex with crowded wifi. Router is Cisco E2000 with DDWRT firmware...
The link speed showing on the network signal app only maxes at 54 mbps though. I can stream 1080p mp4s from my network drive though so its fast enough for me...
RT-N12 is operating on 2.4ghz and does not support 5ghz. Are you sure you are in "N-Only" mode or are you in "Mixed"??
This has been discussed in great detail in general section. Its known Prime can't connect to 5Ghz. set it to 2.5 or G only. G only seems tl yield best results. also check this article out..might help.
www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
Yes, it connects 2.5 N only but the performance is pathetic. Prior to ICS, I got curious changing my 2.5 GHz band to strictly G. Saw an immediate boost in performance + speeds.
Yes so far I am very disappointed. I just got the Prime today and it immediately updated to ICS. Once that was done I started checking out the wifi ability right away, because of all the bad reports all over the internet. Much to my surprise, mine doesn't see my wireless N either. I had the TF101 prior and it worked fine with my router. My Samsung E4GT phone sees it just fine, and what really hurts is my wife's iPad 2 sees it, connects to it and pulls just under 20mbps speeds.
To say this sucks is an understatement. I hate losing to Apple in any way, and here I am with the latest and greatest Android tablet, and being punked by a nearly year old IOS device.
Crap
I have no wifi issues with my N router... Performance can be a little better (speed wise) but no issues connecting at all, my router is cisco
Sent from my Transformer Prime TF201 using xda premium
wherestheanykey said:
Yes so far I am very disappointed. I just got the Prime today and it immediately updated to ICS. Once that was done I started checking out the wifi ability right away, because of all the bad reports all over the internet. Much to my surprise, mine doesn't see my wireless N either. I had the TF101 prior and it worked fine with my router. My Samsung E4GT phone sees it just fine, and what really hurts is my wife's iPad 2 sees it, connects to it and pulls just under 20mbps speeds.
To say this sucks is an understatement. I hate losing to Apple in any way, and here I am with the latest and greatest Android tablet, and being punked by a nearly year old IOS device.
Crap
Click to expand...
Click to collapse
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
jedi5diah said:
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
Click to expand...
Click to collapse
Exactly, the prime doesn't support the 5Ghz frequency. Only supports 2.5ghz N or whatever. There's only a few tablets that do actually support 5ghz. All it takes is a simple change n it'll work. THE whole argument that it should work on any network is b.s. Especially if you have it set to something not supported. Doesn't take a genius to figure that out.
I've always used N-Only. I get a decent connection to my Transformer Prime with it too.
Mines is the cheap Belkin N150 router so I doubt it does that 5Ghz range as that seem like a setting for a higher priced N router.
Scott1620 said:
I can connect my prime to my router with N only as long as its on 2.4GHZ and between channels 1-11. I wish I could pick up 12-14 because I live in an apartment complex with crowded wifi. Router is Cisco E2000 with DDWRT firmware...
The link speed showing on the network signal app only maxes at 54 mbps though. I can stream 1080p mp4s from my network drive though so its fast enough for me...
Click to expand...
Click to collapse
Point 1: Your are in the US, so you are not allowed using anything except 1-11 by FCC regulations.
Point 2: N-Only often turns on channel bonding in soho equipment like yours, so it needs 8 full channels to use it properly. Each channel is 5 MHz apart from the other and a WiFi device uses channels in a/b/g that are 20 MHz wide, in 11n with channel bonding (which is an optional feature for the high data rates) they use channels of 40 MHz. So dividing the 40 Mhz by 5 Mhz makes using of channel 14, 13, 12, 11, 10, 9, 8, 7. If you would live in Japan, on only country that is allowed to use channel 14. So for US it would be channel 11-4. This explains why channel bonding in the 2.4 GHz band is a band ides unless you are living in a big ranch 500 feet away from the next WiFi router.
---------- Post added at 11:28 PM ---------- Previous post was at 11:24 PM ----------
the_game_master said:
I've always used N-Only. I get a decent connection to my Transformer Prime with it too.
Mines is the cheap Belkin N150 router so I doubt it does that 5Ghz range as that seem like a setting for a higher priced N router.
Click to expand...
Click to collapse
Cool device, taken from the specs page of belkin.com:
Security: Wi-Fi Protected Setup, 256-bit WEP (64-128bit), WPA-PSK (TKIP), WPA2- PSK (AES) with WPS Push Button
Range of up to 1,000 ft.
Link Rate: Up to 150Mbps in 40MHz Channel Mode Bandwidth 20 MHz & 20/40 MHz auto
ISP Protocols Supported Dynamic, Static, PPPoE, PPTP, Telstra Bigpond, L2TP
Compliant Standard IEEE 802.11b, 802.11g
So no 11n support per specs, but the Overview page tells 150 MBits are supported, so it can run 75 Mbits without channel bonding and 150 with.
Try out the WiFi Widget it tells you the data rate to the WiFi router.
jedi5diah said:
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
Click to expand...
Click to collapse
I spent the extra money to purchase a dual band router, so I could broadcast N and G as two separate signals. As I understand it, if you broadcast both on a single signal, and you have some older devices that require and connect to the G band, it will automatically cut the speed back, to whatever the slowest device connected is capable of. At least that is the way it was explained to me. So the N was on 5ghz and G was on 2.4ghz. It has always worked with any other wireless N device I have had, until I got this "latest and greatest" tablet. So yes now I have downgraded my wireless network to only 1 band, to accommodate the Prime.
wherestheanykey said:
I spent the extra money to purchase a dual band router, so I could broadcast N and G as two separate signals. As I understand it, if you broadcast both on a single signal, and you have some older devices that require and connect to the G band, it will automatically cut the speed back, to whatever the slowest device connected is capable of. At least that is the way it was explained to me. So the N was on 5ghz and G was on 2.4ghz. It has always worked with any other wireless N device I have had, until I got this "latest and greatest" tablet. So yes now I have downgraded my wireless network to only 1 band, to accommodate the Prime.
Click to expand...
Click to collapse
If you have 2.4ghz g network, prime should be able to detect it. Check if your dual band is working properly...
Wireless n is impt only if you stream HD movies. I stream music on g with no problem at all.
I know you feel frustrated, and I know it sucks as prime is supposed to be PRIME. If you intend to stream HD movies to prime you may have to "down grade" to 2.4ghz if not wireless N is kind of overrated or "miss used" as I see no use of having to stream HD to non HD devices. If you are a home theater enthusiastic or business it then wireless n 5mhz is a must.
Hope you can move on to appreciate the quad core of prime than dwelling on this issue.
Cheers!
dagrim1 said:
N-5ghz is not supported, putting it in 2.4Ghz mode should work (at least, it does on mine... whether there's a difference or not is another thing)
Click to expand...
Click to collapse
Dah!!
I just open a new thread for this very issue.... I'm sure I'm going to get ding for it.
any way...
Mine doesn't connect to the "N" wireless
My router hosts "N" and "a/b/g" modes cisco 3200
it only connects to the 2.4 Ghz a/b/g mode...
Desn't work even if I set the "N" mode to 2.4 Ghz channel and turn OFF the a/b/g mode.
PuroKaibil said:
Dah!!
I just open a new thread for this very issue.... I'm sure I'm going to get ding for it.
any way...
Mine doesn't connect to the "N" wireless
My router hosts "N" and "a/b/g" modes cisco 3200
it only connects to the 2.4 Ghz a/b/g mode...
Desn't work even if I set the "N" mode to 2.4 Ghz channel and turn OFF the a/b/g mode.
Click to expand...
Click to collapse
You right about getting ringed..lmao. I just posted to your thread. 5Ghz N range is marketing b.s. its way overhyped n not as good as people think anyways. Read this tech article to get the real scoop on it and tips.
Www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
demandarin said:
You right about getting ringed..lmao. I just posted to your thread. 5Ghz N range is marketing b.s. its way overhyped n not as good as people think anyways. Read this tech article to get the real scoop on it and tips.
Www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
Click to expand...
Click to collapse
I did read it and thank you at the other thread....
Great Read...
Thanks again.
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
i thought wifi was only 2.4ghz on this phone. my 5ghz network doesnt even show on my phone.
5ghz seems to be working fine for me
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
grad20_09 said:
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
Click to expand...
Click to collapse
I have been able to use channels 140 and 149 as well as 36. What I did notice is that the first time I connect to (the very first time or if I make a change to the router) the wifi signal will drop and start several times.....I find if I just turn off wifi and turn it back on and reconnect it will hold.
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
dagnasty said:
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
Click to expand...
Click to collapse
Hmmm...mine is set to N only...being its the only device on my 5G connection.
Yea, the only thing on mine is my other router setup as a bridge for my downstairs. I guess ill leave it since its working
Sent from my EVO using XDA
I've got an apple airport extreme. my evo connects just fine on 5ghz
I have a Cisco ISR wireless router and I use strictly 5Ghz. It's wireless-A, not wireless-N, but it's strictly 5Ghz and it scan and uses whatever channel it wants. No issues so far.
I tried N network a while ago on my older phones (not 5Ghz N) and noticed more battery drain VS G. Since then I have switched my N to 5Ghz and just use my ipad3 for it. My phone I keep on G network. I don't see any real point to having it on a N network. G I still pull 10+ megabits down which is more than enough for pretty much anything the phone can do. Not really worth the extra battery drain in my opinion. My ipad I like on higher speed since I stream MKV files but the phone I think is pointless at least for me.
Sprint HTC Evo 4G LTE 5Ghz WiFi
dagnasty said:
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
Click to expand...
Click to collapse
I actually had the exact same problem as you mentioned. The one thing I wanted to add to your excellent description of problem symptoms is that it says "Authenticating", and that is when it drops the signal to -1Mbps. Something during the authentication process seems to kill the radio connectivity. This has not happened on any of my other 802.11n devices. It connects fine on the same router's 802.11g. I had no issues with my previous phone (Samsung Epic Galaxy S).
Interestingly my router is a different brand but perhaps it shares some similar chipset. My equipment as follows:
Bone stock Sprint HTC Evo 4g LTE (on Ice Cream Sandwich, duhh)
Belkin Play N600 HD Wireless Dual-Band N+ Router (F7D8301 v1)
After reading the other posts here it inspired me to play with my Router configs for 802.11N. Turns out after making some adjustments I was able to get connected.
-I had the following selected:
Wireless Channel: Auto
Extension Channel: 40 (grayed out)
Wireless Mode: 802.11a&n -Worked after changed to 802.11n
Bandwidth: 20/40MHz
Protected Mode: OFF -Worked after changed to On
802.11e/WMM QoS: On
I honestly think it was the Protected Mode that made the difference. Here is what the router help page says about that feature: Protected Mode
NOTE: In most situations, best performance (throughput) is achieved with Protected Mode OFF. If you are operating in an environment with HEAVY 802.11b traffic or interference, best performance may be achieved with Protected Mode ON.
So long story short, try turning Protected Mode ON in your 802.11n configs first and see if that gets it going for you. Hope that helps!
P.S. After changes above I ran some Speedtest.net for Android tests (back to back) and got the following from the next room over (about 20 feet from router):
Test 1: On 802.11n: 17024kbps down, 5857kbps up, 27ms ping
Test 2: On 802.11n: 18134kbps down, 6266kbps up, 39ms ping
Test 3: On 802.11g: 15385kbps down, 6091kbps up, 25ms ping
Test 4: On 802.11g: 22212kbps down, 5785kbps up, 43ms ping