[HOW TO] Install EB01 ROM with SlicedFlav or Stock - Fascinate Android Development

Excited to give you guys a walk through again. I have included my hybrid flavor of the EB01 stock ROM. I have kept TouchWiz on there but removed all bloat ware and dibinged the phone. I have also included the Gingerbread keyboard apk (separate install, I just love this keyboard.).
Give the shout out to the originators of this information. XDA is a great site.
Don’t worry, I have a link for the stock too.
First this will assume that you are on the DL30 leak. This is for the Fascinate and no other phone. I am not responsible for your doing. This is what worked for me.
If you are not up to the standard above click here: http://forum.xda-developers.com/showthread.php?p=11177786#post11177786
**********************************************************************
I AM NOT RESPONSIBLE FOR YOU DOING. THIS WILL VOID THE WARRANTY OF YOUR PHONE.
THIS IS JUST THE STEPS I DID TO GET MY PHONE TO EB01 FROYO.
***********************************************************************
You will need the following items:
Samsung Drivers
Odin 1.3
eb01modem.tar
update.zip
cwm_froyo.zip
eb01_SlicedFlav_pub.zip
OR
eb01_stock.zip
Now follow the below steps
1.] Download and install the Samsung Drivers
2.] Connect your phone to your computer and copy over the update.zip, cwm_froyo.zip, eb01_SlicedFlav_pub.zip (or) eb01_stock.zip to the “ROOT” of your SDCARD.
3.] After you download Odin and eb01modem.tar put them in the same folder.
4.] Disconnect your phone from the PC, power off, and pull your battery out. (It’s the easiest way)
5.] Plug in your phone while holding the volume down and turn the phone on. You will see a yellow triangle
***************************************************************************************
THIS IS IMPORTANT > DO NOT TOUCH ANY SETTINGS IN ODIN, ONLY USE THE PDA BUTTON AND THE START BUTTON.
IF YOU TOUCH ANY OTHER BUTTONS IN ODIN YOU COULD BRICK YOUR PHONE.
***************************************************************************************
6.] Launch Odin as administrator in Vista and 7.
7.] Select the PDA button. AND ONLY THE PDA BUTTON, YOU CAN BRICK YOUR PHONE.
8.] Select the “eb01modem.tar” file.
9.] Click on “Start”.
10.] You phone will shut off, give it a min or so and it will boot back into download mode.
11.] Unplug your phone, put your battery back in, and boot into recovery mode by holding volume up and down while pressing the power button. Let go of the power button when you see “Samsung”.
12.] Scroll using your volume up and down keys. Highlight "apply sdcard:update.zip” and use your “Home” key to select.
13] Now you want to “wipe cache” twice for good measure. Highlight “wipe cache” and use your power button to select now. Scroll down and select “Yes” both times.
14.] Now you will want to “wipe data/factory reset” twice. Highlight “wipe data/factory reset” select it, and then select “Yes”.
15.] Now you will want to select “install zip from sdcard” then select “choose zip from sdcard”.
16.] Scroll down and select “cwm_froyo.zip” and confirm it. The screen will go wonky for a second.
17.] Select “choose zip from sdcard” again.
18.] Scroll down and select “eb01_SlicedFlav_pub.zip” or “eb01_stock.zip” confirm your selection.
19.] Let it do its thing and boot up.
You now have the way SlicedDrip feels the Fascinate should be and the way Verzion thinks it should be.
Have fun.
If you want the Gingerbread keyboard, download it HERE, move to your phone, use your favorite file manager, browse, and install.
The following only applies to the SlicedFlav install:
ITEMS REMOVED:
All VZW apps
Blockbuster
Media Hub
All Share
Samsung Keyboard
My Files
Write and Go
All Demo Gams
Nuance
Buddies Now
City ID
Skype
Kindle
Most live wallpapers, kept default, when I removed it would give me errors on first start up.
Visual Voicemail
THINGS STAYED / SAME:
TouchWiz
Debinged Browser
Third party sync application
Swype
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
~SlicedDrip~Out~
http://blog.swiftlyit.com/

What's the difference between this post and the one here: http://forum.xda-developers.com/showthread.php?t=951210

thanks very much.

HQRaja said:
What's the difference between this post and the one here: http://forum.xda-developers.com/showthread.php?t=951210
Click to expand...
Click to collapse
Sorry to many whiskies that night.
Sent from my SCH-I500 using XDA App

Is this rom able to keep perfect time with verizon's updater?
the other roms like jt's and adrenalyne's has a time lag which i'm so annoyed of. Please confirm by downloading clocksync and check if it's consistent.
Also, it seems like the cwm.zip or the update file from adrenalyne's doesn't work with your rom. corrrect? It's stuck on the samsung bootup screen.

shilohdrummer said:
Is this rom able to keep perfect time with verizon's updater?
the other roms like jt's and adrenalyne's has a time lag which i'm so annoyed of. Please confirm by downloading clocksync and check if it's consistent.
Also, it seems like the cwm.zip or the update file from adrenalyne's doesn't work with your rom. corrrect? It's stuck on the samsung bootup screen.
Click to expand...
Click to collapse
I will have to check on the clock sync.
The files I have linked in my original post are the ones I used for my phone.
What are you currently running. The only thing I did on my flavor ROM was delete files from the stock version (it is linked on the original.)

SlicedDrip said:
I will have to check on the clock sync.
The files I have linked in my original post are the ones I used for my phone.
What are you currently running. The only thing I did on my flavor ROM was delete files from the stock version (it is linked on the original.)
Click to expand...
Click to collapse
I just got your rom flashed on my phone. It seems like the clockwork was the problem. I came from adrenalyne's EB01 2.3. The clockwork I was using was an older version of JT's. Your rom ONLY works with JT's new ALL_FROYO_CWM and presumably the one you posted on this thread.
Onto your rom... IT'S PERFECT (so far). Seems like the battery lasts longer and there is no time lag... but what do I know, I only had it for an hour. I'll reply once I spend more time with it. If it's consistent, YOU HAVE THE BEST ROM FOR SAMSUNG FASCINATE AT THE MOMENT!!!!!!

Was easy to install man.thanks for your hard work and time. Noticed the update.zip you has on the op didn't work for me. Had to use my original cwm update.zip and when in contacts the back button wouldn't exit the contacts menu. Peace out, achron
Sent from my SCH-I500 using XDA App

FOR EVERYONE WHO'S STUCK ON THE SAMSUNG LOGO. FLASH CWM THROUGH ODIN (the .tar file) from here http://forum.xda-developers.com/showthread.php?t=942021
and then flash the rom through cwm.
REVIEW: IT'S EFFIN PERFECT!!!
TIME IS PERFECT (no time lag like every single other rom), BATTERY LASTS FOREVER!!! TOUCHWIZ IS REALLY NICE WITHOUT BLOATWARE AND YOU KNOW IT!!!! FROYO FTW
I've tried every single rom from JT's and PUNK KAOS and ADRENALYN'S. This one actually works flawlessly and doesn't have any problems with it. MARK MY WORDS!!! The other roms will burden you with either time lag, few hour battery, not working hardware, etc. BELIEVE ME!!! this is the only rom that was MADE for this phone. THANK YOU man.

shilohdrummer said:
FOR EVERYONE WHO'S STUCK ON THE SAMSUNG LOGO. FLASH CWM THROUGH ODIN (the .tar file) from here http://forum.xda-developers.com/showthread.php?t=942021
and then flash the rom through cwm.
REVIEW: IT'S EFFIN PERFECT!!!
TIME IS PERFECT (no time lag like every single other rom), BATTERY LASTS FOREVER!!! TOUCHWIZ IS REALLY NICE WITHOUT BLOATWARE AND YOU KNOW IT!!!! FROYO FTW
I've tried every single rom from JT's and PUNK KAOS and ADRENALYN'S. This one actually works flawlessly and doesn't have any problems with it. MARK MY WORDS!!! The other roms will burden you with either time lag, few hour battery, not working hardware, etc. BELIEVE ME!!! this is the only rom that was MADE for this phone. THANK YOU man.
Click to expand...
Click to collapse
While I appreciate your opinion and review of the ROM directly comparing it to other ones can sometimes feel like your slighting those devs so yeah, this rom is terrific I've used it, but I've used the other ones you've listed as well and I think they're just as good, directly comparing them like this is for lack of better words rude as you're dissing someone's work that they made for you for free.
So yeah, I just had to let that out because I've seen such criticisms of other dev's roms a lot recently and it bothers me. They're working for free, you might like one better than the other, but really its not smart to try to say one thing is better than the other period, or that a rom is bugged and doesn't work and lags etc etc its just rude.

shilohdrummer said:
FOR EVERYONE WHO'S STUCK ON THE SAMSUNG LOGO. FLASH CWM THROUGH ODIN (the .tar file) from here http://forum.xda-developers.com/showthread.php?t=942021
and then flash the rom through cwm.
REVIEW: IT'S EFFIN PERFECT!!!
TIME IS PERFECT (no time lag like every single other rom), BATTERY LASTS FOREVER!!! TOUCHWIZ IS REALLY NICE WITHOUT BLOATWARE AND YOU KNOW IT!!!! FROYO FTW
I've tried every single rom from JT's and PUNK KAOS and ADRENALYN'S. This one actually works flawlessly and doesn't have any problems with it. MARK MY WORDS!!! The other roms will burden you with either time lag, few hour battery, not working hardware, etc. BELIEVE ME!!! this is the only rom that was MADE for this phone. THANK YOU man.
Click to expand...
Click to collapse
theres nothing in this rom that would significantly affect battery life one way or the other...really only undervolt kernels will do that...and we dont have them for froyo yet.
and you do realize that jt, pk, and adrynalyne are responsible for virtually everything on this device and that anything built is just variations on what they have done. theres only so much that can be done to a touchwiz based rom, so anything that does come out will, again, just be another variation of what has already been done.
nice work by the op of course, but get some things straight.
(not to discredit the work of birdman, et all just these 3 were mentioned)

hmm.... I wasn't criticizing the developers themselves (sorry for leaving birdman), but the roms themselves
I was just frustrated I missed some important meetings because the alarm didn't go off due to the time lag.
Anyhow, this rom, a variation of the top 4 developers, turns out to still have the time lag. It was off by a whole 30 minutes this morning. Seems like all EB01 and DL30 has this bug T T .
any remedies? I remember punkkaos' rom not having time lag,,, but.. well, you know.
at least the battery life improves. here.

What do I need to do if I am using the Dj05 build to install this?

I find it amusing that you would blame any dev for the time lag issue when its a bug in dl30 and eb01. It happens even on the stock roms. So point your frustration at Samsung.
As for battery life, to each their own. We all use the same kernels, radios, and battery drivers.
Sent from my perfectly clock synced superclean 2.4.

Have you removed the extra libs and framework files associated with the apps that you removed from the ROM?

adrynalyne said:
I find it amusing that you would blame any dev for the time lag issue when its a bug in dl30 and eb01. It happens even on the stock roms. So point your frustration at Samsung.
As for battery life, to each their own. We all use the same kernels, radios, and battery drivers.
Sent from my perfectly clock synced superclean 2.4.
Click to expand...
Click to collapse
so sorry adrynalyne. I unintentionally misdirected my anger. I should be angry at my fellow koreans T T, Hopefully you read this and forgive.
I actually fell in love with your rom again after you added the 5 lock screens at 2.4 (Im weirdly addicted to a message shortcut from lock screen)
Hopefully another driver or gingerbread will somehow improve battery. The 3500mah batteries they sell on ebay don't look so pretty.
There seems to be a variation with the time lag. Some of my friend's fascinate are always fine, some aren't

adrynalyne said:
Sent from my perfectly clock synced superclean 2.4.
Click to expand...
Click to collapse
That made me laugh my ass off

I've tried all 3 Roms and no clock lag at all not once. Maybe mine keeps up cause I remove it from the status bar;-)
Sent from my super clean 2.4 with no hardware issues. Jk jk lol lmaorof. Lol
I'm not smart
Googbye. Thanks for all the work by the devolopmentoringers.

Related

[ROM]Fission 2.4.3 Droid2Global-Vanilla Generic Android-AOSP Like-Fission ROM Manager

A flashback to when ROM was first booted ... the good ol' days.
SBF is now available on the Team Black Hat App that can be had from Android Market.
Team DeFuse Presents
Vanilla Android 2.4.3
Only use themes made for 2.4.X if you want to keep lots of new features in Fission!!!​
Video Install Guides for Fission ROM Manager can be found HERE. Thank you darkonion for making the vids
Text version of instructions located below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Us & ROM:
The first generic Android platform for current and future Droid devices. We are a bunch of mad hackers, modders and developers that were not happy with the current model of Droids being "Blurred" so we began a mission to rid our devices from the blurriness of VZW Android systems. It started with a crazy idea of messing with the Droid2 SDK that has turned into a full fledge AOSP generic type of ROM. We have incorporated many features that were only seen in AOSP ROMs before this. Some of the features include Reboot in Power Menu, custom built Framework, vanilla Android GUI, totally blur free app folder and many more AOSP like features to come in the short term future.
Features:
True Vanilla ROM with generic Android feel, not themed to look line one. No blur apps...
Reboot in Power Menu.
Custom Framework - 10% battery increments with display percent number & without.
Overclock ready out of box.
Lots of free memory.
ROM has root and has been deodexed, and zip alligned.
Busybox installed and symlinks have been applied.
Clean base for you to customize how you like.
And many more...
Fission ROM Manager:
Fission ROM Manager (FRM) is a utility we developed to make modifying your Droid phones much easier. It was designed for the new Android user but also very useful for the more advanced user. You can download ROMs, themes, updates add ons and much more. Once your downloads are done you can install everything within Android. No need to go into recovery any more.
HotFix:
Please see download links for new patches.
Team DeFuse Members:
Developers
AngDroid - Team Leader, Project Manager & Developer
braway - Developer
Drod2169 - Developer
Requiem4D - Developer, IT dude & Kernel Specialist
IRC & Forum Support
WalCs - Support Manager - Developer Assistant
Themers
javroch
MJones1052
barracuda
Joe772
tgwaste
StuntinX
draya1986
Web Design & Maintenance
WebKaiser
Jcatt
Web:
Team DeFuse
IRC:
IRC Server - Freenode.net
Chanel #teamdefuse
Twitter:
@Team DeFuse
@AngDroid
Themes:
Check Fission ROM Manager. Many themes are up.
Changelog:
2.4.2 -> 2.4.3
Removed Sound and Speach Recoder
Added new Sound Recorder that can be launched from App Draw
Added 10% Battery Display option to FRM. Will reset current theme back to Stock Fission.
2.4 -> 2.4.2
DX build gets new framework whcih should fix the random USB reboot when plugging in.
All previous fixes are now included
Latest Android Market
More Code Cleaning
Full version ROMs and Upgrades are available. Upgrade will only replace packages. It will not wipe app or framework folder.
No reason to wipe cache or data if coming from Fission ROM for either Full ROM or Upgrade.
2.2.1 -> 2.4
All Devices are now equal. Perform and look the same.
Framework improvements all around. Colors, placement of graphics...lots of little changes.
Almost all apps for each device have been rebuilt from source. Either from AOSP source or Moto source.
Each device now has device specific apps. Will help of future Blur add on. Many people been asking for many different Blur apps so there will be an add on Blur package. Blur package will be heavily modified Blur services and then each app will be an individual add on.
MMS menu compose graphic now fixed.
Phone mute fixed.
Rebuilt Moto Apps (MediaGallery, Cam and Music) are now standard. They work better and will help with Blur add on. Generic Android Apps will be available on FRM.
All devices now use Moto Multi-Touch keyboards. They are themed as Generic Android Keyboards.
More cleaning of code and tweaks...
Few other changes I can not think of right now
Small bug with Global ROM. If you need to activate, slide out keyboard and hit the number key you need to use.
No need to wipe data or cache if coming from previous Fission ROM; however the installer will wipe your system folder so back up any changes you have made to your system folder.
DO NOT USE 2.3.1 Themes. They will work but you will lose lots of changes. Themers are working hard now to update themes.
I must say these are the best Fission ROMs so far. Lots of love and hard work went into them.
Install Instructions:
All install instructions can be found on Team DeFuse Website.
Bug Reporting:
Please use Our Google Code Project Home to report bugs. You can find it HERE.
Search before posting bug. The bug may have been reported and fixed.
Donations:
Thanks to everyone who has donated. If you would like to contribute to our cause you may do so by clicking HERE, thank you very much.
Downloads:
Droid 2, Droid 2 Global, Droid X, Droid Pro & Fission ROM Manager - DOWNLOAD
By clicking the download link and proceeding to download page, you agree to that you have read everything in this post.
Click HERE if you agree.
Thanks!
im getting a 404 error in fission rom manager, ill try manual for now, just a heads up.
edit: oh...its not up yet (?)
re-edit: im super confused now, RC2 never went up that i know of, and now FRM is showing an rc3 that wont download yet either.
botnryan said:
im getting a 404 error in fission rom manager, ill try manual for now, just a heads up.
edit: oh...its not up yet (?)
re-edit: im super confused now, RC2 never went up that i know of, and now FRM is showing an rc3 that wont download yet either.
Click to expand...
Click to collapse
I work fast
RC3 is downloading fine here...you using lite or full?
well i was using lite, but i think my phones bricked now cause i tried to download the stock d2g rom from frm, flashed it, and now i cant get past the motorola M screen, cant get into bootstrap..nothing.
does this rom remove the protection against us carriers?
xryousukex said:
does this rom remove the protection against us carriers?
Click to expand...
Click to collapse
No. That's another problem entirely.
botnryan said:
well i was using lite, but i think my phones bricked now cause i tried to download the stock d2g rom from frm, flashed it, and now i cant get past the motorola M screen, cant get into bootstrap..nothing.
Click to expand...
Click to collapse
Have you tried a battery yank? If so and it didn't work try again but before turning your device back on open the slider and press and holding the 'x' button. Keeping 'x' pressed down press and hold the power button. Keep them both pressed down. You'll get the M screen but it should boot into recovery.
Sent from my DROID2 using XDA App
yyeah i can get it to boot into THAT recovery, but what good does that do?
Sorry about the market issues guys. It worked at first when I was testing and then it crashed on later when I was not home so I could not fix right away.
RC3 was fixed and uploaded again.
You may have to go back to your OEM backup or RC1/2 backup, download RC3 again install it.
My mistake and sorry...just some stuff that happens when doing this sort of thing
RC4 or finall will be on FRM Full at some today/tonight. I am putting the final touches on it now
botnryan said:
yyeah i can get it to boot into THAT recovery, but what good does that do?
Click to expand...
Click to collapse
Did you wipe cache and data from recovery? Stock or clockwork recovery will do...
Pulled RC3...damn new market keeps crashing...
RC4 will be up in a bit...
botnryan said:
yyeah i can get it to boot into THAT recovery, but what good does that do?
Click to expand...
Click to collapse
If all else fails from recovery you can install your backup and get your phone running again.
Sent from my DROID2 using XDA App
yeah about that, i wasnt expecting issues so i didnt make one :\
EDIT: called verizon, they had me load bootloader and wipe data, of course that didnt work so theyre sending me a new one
Angdroid - you mentioned on your twitter about getting it to work on AT&T and needed a Tmo sim to test, so what rom will this work-around be included in? Thanks!
botnryan said:
yeah about that, i wasnt expecting issues so i didnt make one :\
EDIT: called verizon, they had me load bootloader and wipe data, of course that didnt work so theyre sending me a new one
Click to expand...
Click to collapse
Can you get into clockwork recovery? If so I have an OEM image that you can use.
Rule number 1, always make a back up
noope, only stock recovery.
this is my first android device ive rooted and such so i guess ive learned my lesson about backups. sucks i had to do it the hard way but i guess im a little hard headed. at least i can get it replaced :\
Great job guys. Keep up the good work!
Final or RC5 should be out later tonight. I have one more bug to kill and it will be gold
Any find any issues so far with RC4?
Using rc3, only issue i have is the lack of the reboot option on power button press, and in call menu stuff. Idk if those were updated in rc4 or rc5but im just sayin.
Sent from my DROID2 GLOBAL using XDA App
I don't see the normal post from AngDroid but it appears RC5 is on FRM. Running it right now without any initial issues.

[Q] Axura GPS > Nero GPS?

Hi everyone,
I'm a big fan of both Nero and Axura, but I like Nero a bit more and would like to stick with it. My problem is the GPS signal on Nero when compared with Axura is dismal. I have added some images that speak for themselves. I should note I had the same results with previous modem versions and the GPS settings are identical, so the difference is pretty much the ROM. Also, even though I gave both the same time to lock on (about 2 minutes), Axura managed that level of accuracy in about 30 seconds, Nero too around twice as long.
So my question is: How can I copy all pertaining GPS configuration from Axura to Nero?
Thanks in advance!
Nero images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Axura images
how long does it take on both to lock on? on nero, im inside, its taking me like a few minutes... but nero gives me accuracy up to 6 meters, havent tested on axura...
For a lock it takes about a minute on Nero, starts at 50Mts, goes down to 15-20 in about 40 more seconds, then stays there. I had used Team Whiskey's ROMs pretty much since I got my Vibrant about 3 months ago, but once I tried Axura and got an accurate lock in seconds I haven't returned (except to try every release and see if it works as it should.)
I had the same problem I was using axura 2.1 and very good gps. installed Nero 5 and never could get a lock. I when to this post forum.xda-developers.com/showthread.php?t=868774&highlight=vibrant+modem
downloaded one zip file in axura zip rom there is an update folder in the update folder there is the modem.bin I copied it to the first zip file (the modem update) and applied the update with CWM. Worked perfectly and I got 12 sats with lock in less than 30 secs.
Hope it helps if you have a problem (I used linux to do that) tell me which modem you used and I will make you an update.zip file
I dont know this varies so much from
phone to phone, but my GPS was always mediocre, got better with "GPS restore" and now finally with Nero 5 its what it should be.
It will lock on 5-6 sats in 10-20 sec Inside and find me to 20 ft.
I may never change again.
Secular
ps; its not good the first time but once it learns, the next time its super fast.
jmlmrk said:
I had the same problem I was using axura 2.1 and very good gps. installed Nero 5 and never could get a lock. I when to this post forum.xda-developers.com/showthread.php?t=868774&highlight=vibrant+modem
downloaded one zip file in axura zip rom there is an update folder in the update folder there is the modem.bin I copied it to the first zip file (the modem update) and applied the update with CWM. Worked perfectly and I got 12 sats with lock in less than 30 secs.
Hope it helps if you have a problem (I used linux to do that) tell me which modem you used and I will make you an update.zip file
Click to expand...
Click to collapse
So.. Take the update.zip from axura and put it on sd card then flash?
there are other files in the axura update folder. I am not sure. What you need is the modem.bin, redbend_ua and also the script to update your system from CWM. So the best is to download one of the file in the post I referred to in my previous post and just unzip, change the modem.bin file with the one you want, rezip it and apply the update
Awesome
jmlmrk said:
I had the same problem I was using axura 2.1 and very good gps. installed Nero 5 and never could get a lock. I when to this post forum.xda-developers.com/showthread.php?t=868774&highlight=vibrant+modem
downloaded one zip file in axura zip rom there is an update folder in the update folder there is the modem.bin I copied it to the first zip file (the modem update) and applied the update with CWM. Worked perfectly and I got 12 sats with lock in less than 30 secs.
Hope it helps if you have a problem (I used linux to do that) tell me which modem you used and I will make you an update.zip file
Click to expand...
Click to collapse
Sorry for the delay and thanks, that'd be very helpful! I'm currently using the latest (KA5) but I had the exact same results with JL5. I'd appreciate if you did the update.zip based on KA5, since it's the latest.
Have to agree with OP axura gps is good, with nero I would ndver get a gps lock
Sent from my SGH-T959 using XDA App
xgibran said:
Sorry for the delay and thanks, that'd be very helpful! I'm currently using the latest (KA5) but I had the exact same results with JL5. I'd appreciate if you did the update.zip based on KA5, since it's the latest.
Click to expand...
Click to collapse
I am not sure I understand. The lastest axura uses JL5 if you want to use KA5 modem in Axura just download the zip file from this post: http://forum.xda-developers.com/showthread.php?t=868774&highlight=vibrant+modem and apply from CWM
Am I missing something?
jmlmrk said:
I am not sure I understand. The lastest axura uses JL5 if you want to use KA5 modem in Axura just download the zip file from this post: http://forum.xda-developers.com/showthread.php?t=868774&highlight=vibrant+modem and apply from CWM
Am I missing something?
Click to expand...
Click to collapse
Hi,
As you can see in the OP, I had both ROMS using KA5 and the difference was quite significant. The same difference occurs with JL5, so I do not believe the modem is the culprit here.
I thought there may be other files at play, and that is what I am asking for, really. Thanks!
I was thinking about flashing Nero 5 until I read this.
From what I've read your mileage may vary. I love Nero and it's a solid ROM. Do a Nandroid backup and try it out (don't forget to change the GPS settings and run the GPSRestore app from Samsung). If it doesn't work, restore.
I can tell you I have done every possible thing out there since I got the phone to have a working GPS, and flashing Axura has been the only one that has worked for me.
I would like to know this as well. Axura GPS just seems to be more consistent and significantly faster locks than Nero. Sadly. Wish the Axura settings would be incorporated to Nero.
After flashing new ROM (either Nero or Axura), I find GPS locks on very quickly but only for the first few days. Afterwards, it takes forever or don't lock on at all (again on either Nero or Axura).
I've also noticed switching from GPS Status to Maps to Compass or other GPS related software. The GPS has to re-lock which is strange since it has initially already locked on, no need to re-do it for every software.
So, I think it might be how Samsung has written their codes to use GPS hardware. And it's effecting the quick lock-on.
BTW, reason why I switch between GPS software is because I can't find ONE software that has maps, GPS info, and waypoint that I can toggle in.
I also notice my gps trying to relock while switching between apps like google maps, checking in via yelp or any other app that uses gps feature. I always find it strange why it needs to relock when it already has locked before. All in all, vibrant GPS sucks as hello.....maybe more than that. It made me buy a separate gps just for this sole reason.
*** Sent from my Samsing Vibrant (Axura 2.2.5.7) using xda app
se7en10 said:
After flashing new ROM (either Nero or Axura), I find GPS locks on very quickly but only for the first few days. Afterwards, it takes forever or don't lock on at all (again on either Nero or Axura).
I've also noticed switching from GPS Status to Maps to Compass or other GPS related software. The GPS has to re-lock which is strange since it has initially already locked on, no need to re-do it for every software.
So, I think it might be how Samsung has written their codes to use GPS hardware. And it's effecting the quick lock-on.
BTW, reason why I switch between GPS software is because I can't find ONE software that has maps, GPS info, and waypoint that I can toggle in.
Click to expand...
Click to collapse
I believe Maverick has all those features.

[Q] Screen flickering during boot.

If there already are threads about this, please direct me to them instead of flaming. I have searched through the forums without finding anything.
I got my 10.1 WiFi about a month ago, and can't figure out why this is happening, and if it is happening to anyone else. Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all. I had the same issue when I install CWM recovery. I had to try 3-4 different ones, before I found one that didn't flicker.
It seems to me, that it might be kernel related, but I am not sure.
Any input is welcome.
tristan202 said:
If there already are threads about this, please direct me to them instead of flaming. I have searched through the forums without finding anything.
I got my 10.1 WiFi about a month ago, and can't figure out why this is happening, and if it is happening to anyone else. Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all. I had the same issue when I install CWM recovery. I had to try 3-4 different ones, before I found one that didn't flicker.
It seems to me, that it might be kernel related, but I am not sure.
Any input is welcome.
Click to expand...
Click to collapse
Same here, even 3.2 ROMs flickering for me . The only one that doesn't flick is Task ROM
tristan202 said:
If there already are threads about this, please direct me to them instead of flaming. I have searched through the forums without finding anything.
I got my 10.1 WiFi about a month ago, and can't figure out why this is happening, and if it is happening to anyone else. Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all. I had the same issue when I install CWM recovery. I had to try 3-4 different ones, before I found one that didn't flicker.
It seems to me, that it might be kernel related, but I am not sure.
Any input is welcome.
Click to expand...
Click to collapse
Hey man, just got this sorted out
Try to follow this http://forum.xda-developers.com/showthread.php?t=1555984
Key part is that we need to unroot our tabs with North America stock. I think our "Non-NA" stock ROMs weren't really "unlocked" that's why custom kernel won't work well on them.
Super happy now with CM9 + latest pershoot kernel + latest CWM, smooth no flickering
Happy unrooting !
Make nand backup (if recovery flickers use rommanager)
Save it to PC
Wipe everything
Flash P7510UEKMP_P7510XABKMP_XAB.tar.md5 with odin
Reboot
Wipe everything again
Flash recovery.tar.md5 with odin
Reboot
Put this http://www.shabbypenguin.com/users/s0ckm0nk3y/android/acs/galaxytab10.1/Samsung_Galaxy_Tab_10.1_root.zip to storage
Put nand backup to storage
flash the zip
Reboot
Restore nand
Finisch! You can now flash another recovery and any other rom without flicker
In fact there is no way to get the flickering back^^
Files you can get here http://forum.xda-developers.com/showthread.php?t=1555984
ive had the same rolling screen during boot, but recovered with those instructions.
now i have another kind of problem:
roms flash ok, cwm is ok, boot is ok. but when i get to the desktop, if the device goes into standby, ot if i put it in standby withthe power button, when i wake it up, again a rolling screen, but much faster this time!
anyone had this problem before?
only happens on 3.2 custom roms. on the official one its ok, on cm9 from droidbasement its ok
any ideeas?
thanks
here it is a pic of what it looks like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any ideeas?
thank you
nobody knows?
Hello all.
I have the exact same problem as tristan202 which is
Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all.
I am sorry but i think that solutions bringed by "hylde" is not related to this problem but to another problem, through very similar, in clockwork recovery tool : same flickering screen.
I used the link, 2 weeks ago to solve this problem, using 5.5.0.4 version.
But the original thread problem is still unsolved. I tried other ICS roms but with same problem. I'd also like to keep root access.
Thanks to all
cobrax2 said:
here it is a pic of what it looks like
any ideeas?
thank you
Click to expand...
Click to collapse
Well, I have almost the same problem. I am on overcome's rom, and I have a screen similar to yours. It is static, not rolling and it happens only once after reboot for two-three seconds before the lockscreen. After that it is ok, even when I lock the screen. Flashed again but nothing. I haven't found anything about that. Oh well. It may be weird but I can live with it. Has anyone encountered something like that before?
Sent from my amazing 10.1 galaxy tab
I posted this in Task 14 Thread!
Edit//// In response to cobrax2's waking up from screen off!\\\\Edit
I had the same problem I fixed it like this!
The default kernel does not work for some of us, you are now one of us!
Mwahahahahahahahaha!
sorry!
Download
HC 3.2:
10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip:
Download: boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip
From
http://droidbasement.com/db-blog/?p=2479
Put it at the Root of your tab and reboot into recovery, then flash that zip file!
You should be good to go!
If not then you will have to flash back to stock kernel listed at the bottom of the second post or just re flash the Rom your choice, this will be nessesary if you flashed another kernel, Then go back and flash boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip then you will be GTG!
Oh ya it took me 3 hours to figure this out for my self Your welcome! ------------------------------------------>
bugs9477 said:
I had the same problem I fixed it like this!
Click to expand...
Click to collapse
Thanks for your answer.
Which of the two problems related in this thread are you talking about ? The original (which i also have) orignally posted by tristan202 or the second one, posted by cobrax ?
Thanks
Galanthein said:
Thanks for your answer.
Which of the two problems related in this thread are you talking about ? The original (which i also have) orignally posted by tristan202 or the second one, posted by cobrax ?
Thanks
Click to expand...
Click to collapse
So sorry it was ment to be in response to cobrax2's waking up from screen off!
bugs9477 said:
So sorry it was ment to be in response to cobrax2's waking up from screen off!
Click to expand...
Click to collapse
Ok that's what i thought. Too bad for us, we still have our problem
Thanks anyway !
bugs9477 said:
Edit//// In response to cobrax2's waking up from screen off!\\\\Edit
I had the same problem I fixed it like this!
The default kernel does not work for some of us, you are now one of us!
Mwahahahahahahahaha!
sorry!
Download
HC 3.2:
10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip:
Download: boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip
From
http://droidbasement.com/db-blog/?p=2479
Put it at the Root of your tab and reboot into recovery, then flash that zip file!
You should be good to go!
If not then you will have to flash back to stock kernel listed at the bottom of the second post or just re flash the Rom your choice, this will be nessesary if you flashed another kernel, Then go back and flash boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip then you will be GTG!
Oh ya it took me 3 hours to figure this out for my self Your welcome! ------------------------------------------>
Click to expand...
Click to collapse
thanks for the reply, ill try this as soon as i find a bit of free time
Regarding tristan202 and mine problem (flickering boot screen which stops when we press two times the power button), i tried the nightly builds 19/05 and 22/05 of Cyanogen Mod without solution.
Tristan i'll try 2905 nightly build and keep you in touch

[Q] Kitchen Sink error

Just installed Kitchen Sink by Jokersax and Team. Looks great but have one BIG problem - the telephone has not service: During boot I'm getting the error message: Unfortunately, the process com android phone (I took the dots out!) has stopped
That leaves me without phone and data service!
As Th3Bill recommended, in CWM did Choose Advanced, Choose Report Error, Choose Show Log, Choose Reboot Recovery. Then did a Backup. THEN flash Kitchen Sink v2.11 with following options: CM9, Default stock install, full wipe.
Please help! Thank you for any help! C
Did you wipe before install? If you did restore your backup and flash again without wiling from within CWM. You need a working base to start from.
Before going that route boot into CWM, wipe davlik cache, fix permissiins, then reboot.
My MoPho's in the kitchen sink!!
More details about my installs
Thanks for the reply!
I did not wipe within CWM, just the Error-Report-Log thingy that Th3Bill recommended, even though I'm not sure what the reporting changes. I'm just starting out on CWM!
One thing I failed to mention was that a few days ago I was trying to flash CWM recovery as shown here http://forum.xda-developers.com/showpost.php?p=20331623&postcount=6. After erasing the recovery (step 2) I was unable to flash the img file (step 3). I got a bit freaked out, but then installed CWM with the MOTODX2_Bootstrap_signed.apk. Based on that I "upgraded" to CWM 5.5.0.4 with the joker-recoveryv3.zip file.
It all worked flawlessly until I flashed KS 2.11. The first install (AOKP; non-wipe; 1300 oc; all nos and Cyanogenmod animation; select all launchers; font default; keyboard Cyan9; GPS N.Amer; TTS Google; Music CM9; Gapps yes; network CDMA; RIL forced roaming; Alt 2d libs No; Beats Audio Yes; Bravia No) seemed to have installed well, but the boot animation went on for a while, so I left it running while plugged into the wall. Four hours later the phone was out of power (even though it was plugged in), and really hot to the touch. After charging I restored the previous installation.
The next night I tried it again (as Th3Bill suggested, in CWM did Choose Advanced, Choose Report Error, Choose Show Log, Choose Reboot Recovery, Backup, THEN flash Kitchen Sink: CM9, Default stock install, full wipe). This one worked fine except for loosing the phone function. However, again I left the phone turned on and plugged in, and after 5 hours it was dead. After charging restored to the previous install (198-7).
In summary:
1. I deleted recovery a while ago but have CWM. Concerns?
2. with KS installed the phone doesn't seem to be charging
3. lost phone function.
How do I deal with these problems. I'd really like to run KS!! I have the recovery.log file I created before the last flash. However, xda doesn't let me copy it into this Reply as I haven't posted much here.
Thanks for your help!
As far as your phone fc is concerned, try flashing cm9 0.3.something in bills fixes thread, then flash kitchen sink with no wipe option. Boot into 0.3.x first to make sure you have service, then go back to recovery and flash sink.
Sent from my MB855 using XDA
Do not understand the term 'kitchen sink'
We used the term 'kitchen' in the WinMo days to discuss 'cooking' a ROM. Makes sense since kitchens are for cooking.
'Kitchen sink' to me indicates garbage down the drain. What am I missing? Not a big deal, but I am obviously missing what you'all are intending "kitchen sink' to mean.
tia
Kitchen Sink ROM installer. http://goo.gl/aMqiM
Kitchen sink rom is actually anbjnstaller with 5 roms in it. Jokersax th3bill and spleef has busted there ass for this community and you degrade their work by sayigbits trash. Do some research jokers cm9. Miui. Aokp aokpcb gummy and all the options included in each ROM where you can basically mix and match them to create one suitable for each individuals needs/wants . Please show support and thank them! You are doing a great job with this ROM!
Sent from my MB855 using XDA
willysp said:
Do not understand the term 'kitchen sink'
We used the term 'kitchen' in the WinMo days to discuss 'cooking' a ROM. Makes sense since kitchens are for cooking.
'Kitchen sink' to me indicates garbage down the drain. What am I missing? Not a big deal, but I am obviously missing what you'all are intending "kitchen sink' to mean.
tia
Click to expand...
Click to collapse
Kitchen sink ROM = has everything but the kitchen sink
Sent from my MB855 using XDA

[ROM] [5.1.1] [G360T/T1] AeroROM v1 | Built for performance

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey how's it goin' guys! This is my first ever ROM I built, so here it is! Introducing AeroROM!
DISCLAIMER: You should bear in mind that flashing this Custom ROM will void your warranty. Therefore, I am not in any way responsible for any damages (Bricks, Fried Accessories, etc.) that may occur from performing these modifications. You are choosing to do this, it's not me forcing you to flash this ROM, lol
FEATURES
Systemless Root w/ SuperSU (Which is why you don't see "KERNEL IS NOT SEANDROID ENFORCING" at boot)
Built In BusyBox
Killed Knox
Obliterated all unnecessary Samsung bloat
DeOdexed apps
DPI Tweak for more screen real-estate
More under-the-hood build.prop tweaks for improved overall performance
Minimal AeroROM breathing boot animation so it doesn't attack your eyes
Lightweight, Fluid, and Snappy
INCLUDED APPS
Viper4Android FX | A feature-packed EQ app For an enhanced audio experience
Nova Launcher | One of the most widely used launchers
ES File Explorer | An advanced file explorer app, includes root browsing
UC Mini | A reliable web browser
SuperSU | Root management
(New with v1.1) AdAway | Blocks Ads
COMPATIBLE DEVICES
Samsung Galaxy Core Prime MetroPCS variant (SM-G360T1)
And *possibly* the T-Mobile variant (SM-G360T), I do not own it so I would definitely appreciate someone confirming that for me.
INSTALLATION
1 Make sure you have the right device, if you do then you may proceed.
2 Install Root and TWRP if you haven't already
3 Copy the ROM and GApps .zip files to your Internal SDCard
4 Now this is the fun part, lol. Reboot into your recovery, swipe to allow modifications if you haven't already. Then perform a factory reset by wiping the Data, Dalvik/ART Cache, Cache, and System. Once that's out of the way, flash the ROM itself first, then the GApps package.
5 Hit Reboot. Then STOP RIGHT THERE! Once the part that says SuperSU doesn't appear to be installed, hit the Do Not Install button. SuperSU does come with this ROM, it's just the method of installation.
6 Proceed with rebooting, and give it a couple of minutes. It takes this long to boot because of the DeOdexed nature of the ROM, but don't worry, this only happens once!
7 Now it's all yours to enjoy!
You can use either TWRP 2.8.70 or 3.0.1, they both work well in flashing this ROM
GAPPS
To keep a minimal file size, GApps were removed as part of the debloat process. You can get some really good GApps packages from Opengapps.org. Be sure to choose ARM as the Platform, 5.1 as the Android Version, then the GApps flavor is all up to you!
DOWNLOAD
v1.1b
https://mega.nz/#!c1AngIqb!_ZD3kHda2EmvrI9tvqgwPPuu7n2w4nCl9SWMTFiF-9U
SPECIAL THANKS
@ShinySide | TrapKernel Root Kernel
@SuperR | For his Kitchen
@Chainfire | For SuperSU
@ViPER520 | For the Viper4Android FX Mod
XDA:DevDB Information
AeroROM, ROM for the Samsung Galaxy Core Prime
Contributors
FazPhantom
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.1.1 Stock w/ Root & TWRP
Based On: TouchWiz Stock [AOFA]
Version Information
Status: Stable
Created 2017-05-07
Last Updated 2018-03-31
LATEST
v1.1b - This update reverts the Google WebView debloat which causes some users to stay stuck in the checking info screen. Hopefully this update resolves everything.
KNOWN ISSUES
WiFi Calling + VoLTE unavailable.
PREVIOUS
v1.1 - Fixes broken Mobile Hotspot and adds AdAway Ad blocker
v1.0 - Initial Release
KNOWN ISSUES
Mobile Hotspot doesn't work. Will be fixed ASAP.
EXTRAS
Get the newest emojis on your device!
Samsung's firmware for this phone in particular comes with a set of outdated emojis that may interfere with how you see various emojis, new and old, that may be on your screen. Some new emojis come as black boxes, which isn't really good. Therefore, I'll walk you guys through updating the emojis on this ROM (or whatever ROM you may be using on this device)
Prerequisites: Any root explorer app and root access.
1: Choose your emoji flavor. Some of them are...
EmojiOne (Select emojione-android.ttf)
Android Oreo
You are not limited to these options!
Now, make sure the emoji file you downloaded is a font file (.ttf) and rename it to NotoColorEmoji (That should already be the case if you downloaded the Android Oreo emojis)
Head into system/fonts and back up the existing NotoColorEmoji to somewhere else. Then go back to the new emojis you just downloaded, and move that over to system/fonts.
Lastly, set the permissions of the font file to rw-r-r so the system can detect the new set of emojis. This is important, otherwise it won't work.
Now restart your device, and boom, enjoy your brand new emojis! Use with Gboard for best results.
Any New User Interface? Screen shots please?
Kani08 said:
Any New User Interface? Screen shots please?
Click to expand...
Click to collapse
Screenshots are now in the screenshots tab.
I will try it when I have time however I can say rather confidently that this will work on the SM-G360T. The two phones are exactly the same with different branding.
FazPhantom said:
Screenshots are now in the screenshots tab.
Click to expand...
Click to collapse
OK kool, I am waiting for more users to test before I try it.
Anyone tried it as yet? How's it going so far?
Kani08 said:
Anyone tried it as yet? How's it going so far?
Click to expand...
Click to collapse
I'm personally running my own ROM on my own Core Prime and so far so good! Didn't notice any issues with calling or LTE or WiFi or any of the much needed stuff.
FazPhantom said:
I'm personally running my own ROM on my own Core Prime and so far so good! Didn't notice any issues with calling or LTE or WiFi or any of the much needed stuff.
Click to expand...
Click to collapse
Where is the link to download? If it's that good then share it. Thanks.
Kani08 said:
Where is the link to download? If it's that good then share it. Thanks.
Click to expand...
Click to collapse
Lol it's in the post itself, the link with the mega.co.nz, that's where you can download the ROM
35 Minutes, and still only see AEROROM. Vibrations occur every few seconds, like 15s. Tried first without wiping DATA, and then was taking excruciatingly long, so I went back and wiped everything twice, and then re installed without GAPPS, and 35 minutes so far. Will report any further changes. BUt honestly, this phone bootloops for literally nothing mostly. Haven't had such an unstable Samsung device ever. Kinda hate this phone now, always fixing, never can get calls or anything. Bout to just toss it in the trash. I appreciate the work you've done op, thank you. I've been looking, but is there anyway to port Resurrection Remix 5.7.4 from the 360h over to this phone, It's my personal favorite rom, and on every device since it dropped. I dont mind spending a few hours trying, but I can't build it from source.
Lucairian said:
35 Minutes, and still only see AEROROM. Vibrations occur every few seconds, like 15s. Tried first without wiping DATA, and then was taking excruciatingly long, so I went back and wiped everything twice, and then re installed without GAPPS, and 35 minutes so far. Will report any further changes. BUt honestly, this phone bootloops for literally nothing mostly. Haven't had such an unstable Samsung device ever. Kinda hate this phone now, always fixing, never can get calls or anything. Bout to just toss it in the trash. I appreciate the work you've done op, thank you. I've been looking, but is there anyway to port Resurrection Remix 5.7.4 from the 360h over to this phone, It's my personal favorite rom, and on every device since it dropped. I dont mind spending a few hours trying, but I can't build it from source.
Click to expand...
Click to collapse
That's not good, I think I gotta take this down if it isn't very stable. Weird though, I flashed it on my G360T1 and it booted up just fine. If a few more people report instability in this ROM then I'm taking it down, I've given up hope, CM or lineage won't be built for it at all, I doubt it'll happen at all.
But yeah what I would do is wipe every single thing including internal storage, then turn the phone off, flash stock firmware via Odin, and it should be able to fix things up
FazPhantom said:
That's not good, I think I gotta take this down if it isn't very stable. Weird though, I flashed it on my G360T1 and it booted up just fine. If a few more people report instability in this ROM then I'm taking it down, I've given up hope, CM or lineage won't be built for it at all, I doubt it'll happen at all.
But yeah what I would do is wipe every single thing including internal storage, then turn the phone off, flash stock firmware via Odin, and it should be able to fix things up
Click to expand...
Click to collapse
Went go take a bath, and phone is still on AEROROM, slowly fading in and out. I'm going to put stock and try from there. I'd really like a different rom other than SLIM PICKINS. Effing gravitybox causes bootloop, can't theme it black like every other device, even though I do a bit of **** for TBO, but not offically, I just want evrything to be black, but everything I try crashes and bootloops. Good thing I got this phone for free from a repair job. I appreciate your working on a new rom though, hopefully I can get it to work. I'll see if I could pull a logcat for you. Someone needs to dev a phone emulator so people like us could test on devices. I was all excited to see this, so I'll blow through a few hours, and anything I can devise from it, I'll post for you. Maybe together something might happen. I'd hate to see you have to pull it.:crying:
EDIT: Does the versions of twrp that are available work well on your device? Any twrp3 I put, the touch refuses to work. So I'm stuck on 2.8.7.0. blows dogs for quarters...
Lucairian said:
Went go take a bath, and phone is still on AEROROM, slowly fading in and out. I'm going to put stock and try from there. I'd really like a different rom other than SLIM PICKINS. Effing gravitybox causes bootloop, can't theme it black like every other device, even though I do a bit of **** for TBO, but not offically, I just want evrything to be black, but everything I try crashes and bootloops. Good thing I got this phone for free from a repair job. I appreciate your working on a new rom though, hopefully I can get it to work. I'll see if I could pull a logcat for you. Someone needs to dev a phone emulator so people like us could test on devices. I was all excited to see this, so I'll blow through a few hours, and anything I can devise from it, I'll post for you. Maybe together something might happen. I'd hate to see you have to pull it.:crying:
EDIT: Does the versions of twrp that are available work well on your device? Any twrp3 I put, the touch refuses to work. So I'm stuck on 2.8.7.0. blows dogs for quarters...
Click to expand...
Click to collapse
I'm not necessarily developing a totally AOSP-based ROM as this is a totally different case for me, but I'm getting used to making these stock-firmware based ROMs
And the twrp 3.0.1 I used was made by another dev, not downloaded from the official twrp site so I can give you the link to it if you're interested:
https://www.androidfilehost.com/?fid=24459283995316038
I need a rom for my galaxy core prime that will change the UI and optimize performance. I need more ram free. I have version 360gt1 core prime.. Any Miui roms etc available?
Kani08 said:
I need a rom for my galaxy core prime that will change the UI and optimize performance. I need more ram free. I have version 360gt1 core prime.. Any Miui roms etc available?
Click to expand...
Click to collapse
What's really stupid is that it's 2017, it's been rooted, and there still hasn't been any AOSP ROMs such as Lineage or MiUI made for it yet. Like, has this phone been abandoned?
FazPhantom said:
I'm not necessarily developing a totally AOSP-based ROM as this is a totally different case for me, but I'm getting used to making these stock-firmware based ROMs
And the twrp 3.0.1 I used was made by another dev, not downloaded from the official twrp site so I can give you the link to it if you're interested:
https://www.androidfilehost.com/?fid=24459283995316038
Click to expand...
Click to collapse
Dude, thank you. I had already visited and downloaded that one, but it never worked, until last night. OK, so I tried multiple things, wiped every single partition clean, installed stock, (and didn't on the 2nd try) and tried using my own boot.img, and multiple other files, ended up falling asleep with phone in hand, Woke up to still AEROROM fading in and out.
I have a few jobs (I do pc, cell phone repair) and then gotta go sight in a rifle for my cousin today, so I won't be back and able to continue testing today. So sorry I cannot help further for the day.
I have a favor to ask, although technically, you've done a eff-ton for me by the twrp3 thing, but I would completely understand if you don't have time, or would rather not. You know the themes for twrp, fichl's flashable? If you know them, there's a multitude of colors, and bird333's darker purple theme, is my ****, ya knoso if you could possibly get me a flashable version of your bootanimation of AEROROM, (esp with the O with the slash, as that's how I write mine irl) in that color, I would be frigging ecstatic. And I feel like an ass, but if you would do that, I have a very small request to add to that, if you could possibly add my logo to the bottomof the bootanimation, I would flip out. I custom the **** out of everythingbut have yet to work on sammys, so it would be a massive learning curve for something so "simple" and I only ask because you technically have all the resources available to do so. If it's too much trouble, No problem, I totally totally, understand, but grateful is not strong enough of a word to express how I would feel. It's not that I want to "take" your work, it's just that it's an extra thing that gets people wanting me to do those type of things for them, since I'm unemployed,trying to start a small busisness, but I'm a total recluse, so pimped out phone is a great convo starter for me. Geez, Ik I'm rambling, but just woke up. I'll attach my emblem which is just the matrix font, on a matrix bgrnd, of XIIIMACHINE, because I'm not artistic. Sorry to type your, or rather everyone's head off here. sorry! Hopefully, this Rom can get sorted out, and as soon as I get home tonight, I will jump on it, give a hand wherever possible.
Thank you very much for your work, and effort. Keep it up.
https://drive.google.com/open?id=0B5n3TgqFg-TyWEM1aDdxTVRfN2s
https://drive.google.com/open?id=0B5n3TgqFg-TycGF6cTFReWpaYVU
Please make Lineage OS for Samsung Galaxy Core Prime SM-360T1
Doesn't pass
On the tmobile varient (SM-G360T), it doesn't get passed on the "checking info" transition when setting up the device for the first time.

Categories

Resources