[Q] 2.4.3 Update - Droid 2 Global Android Development

I have a D2G. I rooted it.
But it now wants to do a 2.4.3 update. of course the update fails when it reboots
So my question is, could i apply the update using the bootstrap. has anyone tried doing this, would it brick my phone if i tried.

jbroderick said:
I have a D2G. I rooted it.
But it now wants to do a 2.4.3 update. of course the update fails when it reboots
So my question is, could i apply the update using the bootstrap. has anyone tried doing this, would it brick my phone if i tried.
Click to expand...
Click to collapse
You probably could if you remember to wipe data and cache, and you should probably get the Team Black Hat app and download the SBF/driver/RSD Lite files just in case.
Edit: Oh, the update file. If it's failing to install, you should probably just try the full install. I'm not sure why it wouldn't go through unless you're on stock, in which case, you HAVE to use full install.

I think he is talking about the official Verizon update. Not FRM...
When you rooted did you stop or remove any of the Blur apps? That will cause the update to fail. All of the Blurr must be there for the update to work.
If you used Z4Root to root your device, try to unroot the device with zroot and then try the update again.
You may have to re-install Zroot after it is completed to re-root the phone. But I did the update before I rooted almost the day I got the phone so I had not really done enough to notice if it wipes the device and data. My guess would be no!
Since I did this from the stock rom I did not bother to look but if the file is a zip file then chances are likely you can run it from the clockwork recovery.
But best bet is to unroot and then try it again before you go that route.
I would however get RSDLite and the stock SBF to have handy in case you run into problems.

You cannot apply the OTA update (I assume you are talking about 2.4.330 Verizon official OTA update) from the custom recovery. It must be instaled via stock recovery. But due to the way update is made (patch based) it will fail if there are alternations (missing files) in any of the system areas. You must restore all changes you made in /system/app (assuming you froze/delete some stock apps), if you are rooted it is ok, update will not bother (extra files in system do not break the checksum - update only checks original files. But if there is even a single file missing (deleted/renamed) in system area, update will fail to install. If you can't figure it out (what is missing) and update keeps failing, simply flash full SBF to return to stock, apply the OTA update then reroot and freeze/remove all apps that you don't want in system area.

Related

ROOT, Recovery and Update < LOOK here FIRST

This is going to be simply a collection of links with important points...Please read ALL directions and comments carefully...as no one is responsible for any damage to your phone.
NOTE 1: IF YOU ARE UNROOTED AND ALREADY UPDATED WITH OTA, YOU CAN STILL USE THE PROCESSES BELOW TO ROOT AND FLASH RECOVERY.
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 2: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 3: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you want to stop the OTA update notification, use this file which provides simple edits...but be careful as it may make further updates more difficult >> SCH-I500.DI01 Update
UPDATED:
OTA Update with Root and Busybox >> DH12 to DI01 update with root and busybox
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
My path.
1) Stock with root mentioned in this dev section
2)restored CW backup
3)used CW to install the update mentioned in this thread.
No problems so far.
After reading this thread again I went to stock and stock kernel. Rooted and gold again.
I think that CPU Scale app causes the Fascinate to shut down, so if you use it and getting them.... remove the app or let me know if you fixed.
Thanks!!!
Now, here is something I didn't try yet. I am still stock (not rooted), ran the OTA...and with all people having issues, I am scared to root. I want to try but I think I will wait and see if anyone else does this.
tats_06 said:
This is going to be simply a collection of links with important points...
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 1: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 2: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you don't care about root and want to install the OTA update manually >> SCH-I500.DI01 Update
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
Click to expand...
Click to collapse
I thought the post about doing the OTA manually would allow you to keep root, seeing that it's a stripped down version.
Let me clarify that. If that's the case, I can update the OP.
Restored, updated and Rerooted
All is well. No problems so far.
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
namebrandon said:
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
Click to expand...
Click to collapse
Thanks for heads up...first post updated.
Bump.... Back to top till this gets stickied!
wasupwithuman said:
Bump.... Back to top till this gets stickied!
Click to expand...
Click to collapse
Thanks! I just reported it too to request for sticky.
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
azalvarez03 said:
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
tats_06 said:
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
Click to expand...
Click to collapse
I don't think the update blocks root. you should be able to install the OTA as long as your not rooted, then once it is installed go ahead and root your device.
Ok...looks like root went thru...working on cwm recovery now.
OK, recovery installed successfully...running a backup right now.
Should I test restoring? Or should I assume I am safe?
Rooting after OTA update.
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
If you have CWM installed, you always have root via adb, which means you can get your root apps working.
If you're not running CWM, I don't know. Someone who's tried rage.bin post-update could tell you.
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
Yes you can root after update, I did it fine, but had to attempt it twice, the first try it hung, so had to do a battery pull, and then the second time it worked fine.
Nothing in the update seems worth it to return to stock (I've removed so many stock apps already.)
I'm having the Force Close loop issue. My CWR seems to be missing, as all I can access is Android system recovery <2e> with the options of:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Using the Odin method didn't work for me, on multiple tries. My SD card appears to be wiped clean and I can't enter debug mode.
Is there anything short of a miracle that I can do to fix my phone? I've seen a few posts with people saying they had similar problems as mine, but there was never and explanation of how or if they fixed there phone.
Thanks in advance

[Q] ready to update my x2 but would like a couple questions answered first

I am ready to install the latest update to my x2, but i am currently rooted and have the pulldown toggle zip and crt animation on my device, as well as the supercharger script, i know its very easy to remove the supercharger script,but would the crt or pulldown effect the install? Anyone encountered this issue yet?
thanks for the help.
amancini92292 said:
I am ready to install the latest update to my x2, but i am currently rooted and have the pulldown toggle zip and crt animation on my device, as well as the supercharger script, i know its very easy to remove the supercharger script,but would the crt or pulldown effect the install? Anyone encountered this issue yet?
thanks for the help.
Click to expand...
Click to collapse
In order for you to update your gonna have to sbf back to 2.3.3 if that's what your on. If not, then the update will fail because of the root. You will be able to update once you sbf & wipe data in stock recovery as well just to be safe. Hope that helps
Edit: this is for if you are trying to get the ota...sorry I should clarified that first
thanks for the help that basically clears it all up, seeing as im fairly happy with it right now im going to leave well enough alone, when they roll out a bigger update i will consider it, thats what i figured i was going to have to do.
amancini92292 said:
thanks for the help that basically clears it all up, seeing as im fairly happy with it right now im going to leave well enough alone, when they roll out a bigger update i will consider it, thats what i figured i was going to have to do.
Click to expand...
Click to collapse
Just use titanium backup then and back to stock, do the update and reload ur apps. Takes all of about an hour, tops.
Droid X2 - Eclipse v1.0
yeah i have all of that done already, i might give it a try, thanks
Rp...I don't think it will fail just due to root. U WILLA lose ur root.
It most likely WILL fail due to the mods/or rom u run due to missing files that are necessary.
if u are stock rooted I think it would work...but either way good idea to go back bone stock just to avoid any issues altogether
im running the completely stock rom, removing the script i have isnt an issue what so ever, is there any way to remove installed zips that were installed in the recovery?
ashclepdia said:
Rp...I don't think it will fail just due to root. U WILLA lose ur root.
It most likely WILL fail due to the mods/or rom u run due to missing files that are necessary.
if u are stock rooted I think it would work...but either way good idea to go back bone stock just to avoid any issues altogether
Click to expand...
Click to collapse
True always better to be safe than sorry
if your on stock and you want to return your animations to stock you could possibly extract framework-res.apk from /system/framework/ of the stock gingerbread and push it via adb to your phone or you could use root explorer to do so as well. that should erase your mods to animations. and you'll most likely have to reboot after. but animations should retrun to stock after, than unroot and take the ota. but its never a bad idea just to go to bone stock via sbf as rp076 suggested
For taking off the toggles u can just flash the stock notification zip from one of those threads I think it is there somewhere. Or ask the creator of the toggle zip u flashed for the stock one...
But ur safest bet is sbf and data wipe. It's not hard to do at all and is just a good thing to know how to do
I recovered my stock rooted backup from eclipse .8 and took the OTA no problem. You will lose root but Pete's one click will work to root again. You won't lose any apps.
Sent from my eclipsed DROID X2 using xda premium
rp076 said:
In order for you to update your gonna have to sbf back to 2.3.3 if that's what your on. If not, then the update will fail because of the root. You will be able to update once you sbf & wipe data in stock recovery as well just to be safe. Hope that helps
Edit: this is for if you are trying to get the ota...sorry I should clarified that first
Click to expand...
Click to collapse
Steve125 said:
I recovered my stock rooted backup from eclipse .8 and took the OTA no problem. You will lose root but Pete's one click will work to root again. You won't lose any apps.
Click to expand...
Click to collapse
Why do people keep thinking that just because you have root you have to SBF.. Root has nothing to do with the OTA update..
If you try and it fails it's not due to root, it would have to do with something frozen, or you have OTA Blocked with Rom Manager, or something else changed...
Of all the phones out there I can't think of any (ever) that have blocked OTA updates just because of root access.. In fact OTA Blocking had been added in to Rom Manger a few years back to prevent the OTA updates so people wouldn't update and lose root on updates that were not rooted yet.
On a side note, why would you SBF to 2.3.3 instead of just going to 2.3.4? You're just adding an extra step there. That would be like flashing back to Froyo SBF (what's the point?) if you want 2.3.4 GB..
masters said:
Why do people keep thinking that just because you have root you have to SBF.. Root has nothing to do with the OTA update..
If you try and it fails it's not due to root, it would have to do with something frozen, or you have OTA Blocked with Rom Manager, or something else changed...
Of all the phones out there I can't think of any (ever) that have blocked OTA updates just because of root access.. In fact OTA Blocking had been added in to Rom Manger a few years back to prevent the OTA updates so people wouldn't update and lose root on updates that were not rooted yet.
On a side note, why would you SBF to 2.3.3 instead of just going to 2.3.4? You're just adding an extra step there. That would be like flashing back to Froyo SBF (what's the point?) if you want 2.3.4 GB..
Click to expand...
Click to collapse
Calm down killa...just stating what I know thru past experiences & I'm not the only one who's had the problem before. When the 2.3.3 update first came out I couldn't update because my phone still was rooted, NOTHING FROZEN OR REMOVED. I read in other threads at the time that sbf'ing was the way to fix the problem. Once i did that, i was able to get the update installed successfully. Its not a wrong procedure, but a way to be sure to get a clean install. And as for flashing back, I was saying to do that if he wanted the ota
Side note...rom manager isn't or hasn't even been available yet for this phone ...surely you knew that

Fail to update to 4.5.141

Hi all,
My AT&T Atrix is running 4.5.91. I unrooted it to update to 4.5.141 OTA (I understood it was risky to do an OTA update while rooted).
After I finished downloading the update, I started installing but during installation, the package icon changed to a warning icon (with no error message) and the phone rebooted on 4.5.91 with a message saying the update failed
I think the package may have been corrupted in the download as it was interrupted. Although, I did try this 3 times (redownloading each time)
Any tips?
Thanks
You must have frozen and/or deleted some Blur apps as well as being rooted. Unless you have all the stock files from the firmware you are updating from, the install will fail.
I have unrooted the phone
However, I did use the "integrate system apps updates into ROM" option on TB.
I did not freeze anything
Will this work:
http://www.motorola.com/Support/US-EN/Atrix+Upgrade/Atrix-Gingerbread-Update
If not, what must I do?
Edit: Oh, and I also have AdFree installed and enabled. Should I revert?
mickeycohen said:
I have unrooted the phone
However, I did use the "integrate system apps updates into ROM" option on TB.
I did not freeze anything
Will this work:
http://www.motorola.com/Support/US-EN/Atrix+Upgrade/Atrix-Gingerbread-Update
If not, what must I do?
Edit: Oh, and I also have AdFree installed and enabled. Should I revert?
Click to expand...
Click to collapse
The sd card method will fail for you as well. Undo everything that required root access, including adfree...not sure if it will restore the modified files back to stock though, never used that app.
Exactly what happened to me. Successfully updated using Motorola Software Update
Hi
You have succeeded?
I am stuck for months trying to do this update...
It's absolutely frustrating...
I actually stopped trying. I got a RAZR a few weeks after I started this thread...
I might unlock the BL and install some ROMs to play with the Atrix but basically I don't use it anymore...
Anyway, I think the problem I was having was because I integrated updates into the ROM and I don't think it can be undone
Bootloader Unlocked?
If your bootloader is unlocked the update will most likely not work. Regardless, the link below has some useful information.
http://forum.xda-developers.com/showthread.php?t=1501532

Official 2.3.5 Root Method for Droid X2 1.3.418 OTA update

Droid X2 owners i have figured out how to root the new 2.3.5/1.3.418 update. I spent a couple hours trying to get this figured out. Its simple and very easy to do well may not be for some but here you go just follow these simple steps and all that trouble that everybody is having.... here is the solution! First off do a hard reset from phones setting under privacy make sure to copy and paste pictures, music etc. to your computer cause you will have to check internal storage to be deleted for this to work ..after the reset u are going to sbf back to original 2.3.4 with (RSD Lite) Remember it has to be done in this order just take my word for it ...when finished.. phone will reboot let all factory apps download and install including gmail,
vz navigator, google books etc. You will not have to keep these apps you just have to let them install for this update after you sbf 2.3.4 and back to original. When your done with sbf file and have re-activated phone added google account etc... Get (Petes Motorola RootTools_v1.07.zip) no other rooting methods worked ive tryed it.. type that into google search it should find his site.. and make sure to download (Windows Universal drivers) for computer depending on what you have 32 bit operating system or 64 bit.. both of these files can be found on petes site. After downloading drivers and zip file..... unzip petes zip and click on (petes motorola root tools). I had one issue with this when trying to root device i had to put phone into pc mode for some reason. And if still having issues try running the adb temp rooting procedure this seems to work everytime. Run rooting method till done then u should be rooted after this is done dont mess with SU leave it as is for now.... Now you are going to want to head to the the google market on your phone and type (ota rootkeeper) and download that app. After this is done you can go to that app and and press protect root it should say something like su safe or something like that at the bottom after u have pressed it. Now when u are sure u have all these done correctly go to your phone settings and go to about phone and press on system update and download and install the OTA update 1.3.418 to your phone. It will reboot and and install update after this is done let phone load back up and do what it needs to do. Now go back to google market and install (ota rootkeeper) again and you should get only one option and that is to restore root.. press that and there you have it. Now you can update SU, remove unwanted apps, etc.. Do whatever you please. This update has caused so many droid x2 owners to get very ticked off but luckily i found the solution to all the problems. If anybody is having any issues trying to get this done leave posts and messages i will help you out as much as i can. This process went really smooth you should have no issues at all. And if ur wondering about 2.3.5/1.3.418 update it is definitely snappier with and even more snappier with bloatware apps removed. Install the droid X2 bootstrap manager just like u always would. Dont hesitate to leave questions i will try to get back to them as soon as i can. HAVE FUN ROOTING> 2.3.5 And by the way for the people wondering I run this all on stock rom I dont use eclipse, affinity , etc or any other custom rom this is all straight stock rom
ZergRush also works for 2.3.4
RacerXFD said:
ZergRush also works for 2.3.4
Click to expand...
Click to collapse
Heard zergrush changes something and won't let update work or something have to use Petes
Sent from my DROID X2 using XDA
2.3.5 ruined my root droid x2
Got my phone unrooted from this update. I SBFd it back to 2.3.4 in a similar manner using moonshadows post on how to do that. (Took forever) than I rerooted with Petes 1 click roo also downloaded voodoos rootkeeper. Moved it to SD card with TB backup Saved my root. Backed up all my stuff (including rootkeeper) with paid titanium backup app...booted phone on fast boot. Wiped files. Booted back up. Did all the updates than loaded rootkeeper(which was on my SD ccard. Restored root with no problems ran TB backup installed update to 2.3.5 angreat. everything is running great. Running stock ROM. Don't know much but can try to help. Not** I couldn't load my nandroid back up using Tom manager system recovery after update
Thanks for the help.
mnkurk1989 said:
Droid X2 owners i have figured out how to root the new 2.3.5/1.3.418 update. I spent a couple hours trying to get this figured out. Its simple and very easy to do well may not be for some but here you go just follow these simple steps and all that trouble that everybody is having.... here is the solution! First off do a hard reset from phones setting under privacy make sure to copy and paste pictures, music etc. to your computer cause you will have to check internal storage to be deleted for this to work ..after the reset u are going to sbf back to original 2.3.4 with (RSD Lite) Remember it has to be done in this order just take my word for it ...when finished.. phone will reboot let all factory apps download and install including gmail,
vz navigator, google books etc. You will not have to keep these apps you just have to let them install for this update after you sbf 2.3.4 and back to original. When your done with sbf file and have re-activated phone added google account etc... Get (Petes Motorola RootTools_v1.07.zip) no other rooting methods worked ive tryed it.. type that into google search it should find his site.. and make sure to download (Windows Universal drivers) for computer depending on what you have 32 bit operating system or 64 bit.. both of these files can be found on petes site. After downloading drivers and zip file..... unzip petes zip and click on (petes motorola root tools). I had one issue with this when trying to root device i had to put phone into pc mode for some reason. And if still having issues try running the adb temp rooting procedure this seems to work everytime. Run rooting method till done then u should be rooted after this is done dont mess with SU leave it as is for now.... Now you are going to want to head to the the google market on your phone and type (ota rootkeeper) and download that app. After this is done you can go to that app and and press protect root it should say something like su safe or something like that at the bottom after u have pressed it. Now when u are sure u have all these done correctly go to your phone settings and go to about phone and press on system update and download and install the OTA update 1.3.418 to your phone. It will reboot and and install update after this is done let phone load back up and do what it needs to do. Now go back to google market and install (ota rootkeeper) again and you should get only one option and that is to restore root.. press that and there you have it. Now you can update SU, remove unwanted apps, etc.. Do whatever you please. This update has caused so many droid x2 owners to get very ticked off but luckily i found the solution to all the problems. If anybody is having any issues trying to get this done leave posts and messages i will help you out as much as i can. This process went really smooth you should have no issues at all. And if ur wondering about 2.3.5/1.3.418 update it is definitely snappier with and even more snappier with bloatware apps removed. Install the droid X2 bootstrap manager just like u always would. Dont hesitate to leave questions i will try to get back to them as soon as i can. HAVE FUN ROOTING> 2.3.5 And by the way for the people wondering I run this all on stock rom I dont use eclipse, affinity , etc or any other custom rom this is all straight stock rom
Click to expand...
Click to collapse
The above instructions worked for me without factory resetting my phone and without wiping any of my data and thanks to those instructions, my phone is now rerooted with the OTA Update 1.3.418. I thank you for sharing with all of us.
1. DO NOT factory reset your phone or wipe your data.
2. Re-flash your DroidX2 with the sbf file and re-activate your phone.
3. Get Pete’s Motorola RootTools_v1.07.zip. To find it, search google to find his site. Make sure to download (Windows Universal drivers) for computer depending on what you have 32 bit operating system or 64 bit. Both of these files can be found on Pete’s site.
4. Install the Windows Universal Drivers, unzip Pete’s zip file and run Pete's Motorola Root Tools.exe. Wait for Pete’s root tool to finish.
5. Now that you are rooted again, go to the google market on your phone and search for ota rootkeeper. Download the app, run it, and press protect root.
6. Go to your phone settings and go to about phone and press on system update and download and install the OTA update 1.3.418 to your phone.
7. After the phone reboots, run the ota rootkeeper and restore root.
zergrush does not work on 2.3.5
tshelby73 said:
Heard zergrush changes something and won't let update work or something have to use Petes
Sent from my DROID X2 using XDA
Click to expand...
Click to collapse
zergrush does not work!! To all that that wondering why it dosent work it changes something in the build prop or local prop not sure but it does not work for rooting 2.3.5. And also.. For some people they may not have to do a internal factory reset, in my case i did for what reason.. i dont know. Every time i tryed installing OTA update it failed. For the people getting this error you will most likely have to reset your device and follow my instructions. PLEASE READ MY INSTRUCTIONS first before making any changes if u dont want to lose root lose saved music , apps etc.... Remember internal factory reset erases everything in internal memory. Move your things you want to save to ur sdcard
Thanks mnkurk! Saved me a lot of time - work right the first time and allowed me to fully restore my setup from titanium (with backup folder on the sd card).
Using voodoo root keeper to root 2.3.5 update has been known since the update came out.
zerg rush cant be used for a number of reasons,.some people might be able to get away with it, but a lot of times it will cause the 2.3.5 update tofail the signature check , it removes/changed files on system besides just su, to make room for root.
jagsil said:
The above instructions worked for me without factory resetting my phone and without wiping any of my data and thanks to those instructions, my phone is now rerooted with the OTA Update 1.3.418. I thank you for sharing with all of us.
1. DO NOT factory reset your phone or wipe your data.
2. Re-flash your DroidX2 with the sbf file and re-activate your phone.
3. Get Pete’s Motorola RootTools_v1.07.zip. To find it, search google to find his site. Make sure to download (Windows Universal drivers) for computer depending on what you have 32 bit operating system or 64 bit. Both of these files can be found on Pete’s site.
4. Install the Windows Universal Drivers, unzip Pete’s zip file and run Pete's Motorola Root Tools.exe. Wait for Pete’s root tool to finish.
5. Now that you are rooted again, go to the google market on your phone and search for ota rootkeeper. Download the app, run it, and press protect root.
6. Go to your phone settings and go to about phone and press on system update and download and install the OTA update 1.3.418 to your phone.
7. After the phone reboots, run the ota rootkeeper and restore root.
Click to expand...
Click to collapse
Some questions please...
After all these steps are done,
1. Will my sd card still have it's contents in memory?
2. Will all my programs will still be there?
3. I'm not sure how rooting and unrooting will affect already installed programs. Can you please expain.
Thanks for your help!
joliett said:
Some questions please...
After all these steps are done,
1. Will my sd card still have it's contents in memory?
2. Will all my programs will still be there?
3. I'm not sure how rooting and unrooting will affect already installed programs. Can you please expain.
Thanks for your help!
Click to expand...
Click to collapse
1 yes, does nothing to sd card, even if you wipe data in recovery
2 yes, if you don't bootloop and have to wipe data
3 no effect, once root is restored
The link to Droid X2 2.3.4 sbf is down
http://forum.xda-developers.com/showthread.php?t=1201534
Considering I have to flash my ROM i'd prefer a reliable source to get the file.
Edit:
Perhaps a little more browsing was in order, here a few sbf files from MoonShadow's X2 rooting thread
Moon Shadow - NM said:
a. Froyo 2.2.2 SBF File (you may have to right click and select "Save Link As")
b. Gingerbread 2.3.3 SBF File (you may have to right click and select "Save Link As")
c. Gingerbread 2.3.4 SBF File (you may have to right click and select "Save Link As")
Click to expand...
Click to collapse
Daerogami said:
The link to Droid X2 2.3.4 sbf is down
http://forum.xda-developers.com/showthread.php?t=1201534
Considering I have to flash my ROM i'd prefer a reliable source to get the file.
Click to expand...
Click to collapse
If you can get/have the 2.3.3 file, just flash that...then take the ota once and you will be on 2.3.4
should I root 2.3.3-> ota 2.3.4-> ota 2.3.5
or Flash 2.3.3-> ota 2.3.4 then Root-> ota 2.3.5
What is the benefit of going as far back as 2.3.3?
Daerogami said:
should I root 2.3.3-> ota 2.3.4-> ota 2.3.5
or Flash 2.3.3-> ota 2.3.4 then Root-> ota 2.3.5
Click to expand...
Click to collapse
Wait till 2.3.4 to root
No reason to root 233 it will just lose root when you ota any ways
Root .4
Then root keeper app
Then ota .5 and restore root with root keeper app
If going to flash a ROM after that, after you restore root, delete the su backup using the root keeper app before you flash the ROM or the rom flash will fail on ya
---------- Post added at 02:49 PM ---------- Previous post was at 02:45 PM ----------
Daerogami said:
should I root 2.3.3-> ota 2.3.4-> ota 2.3.5
or Flash 2.3.3-> ota 2.3.4 then Root-> ota 2.3.5
What is the benefit of going as far back as 2.3.3?
Click to expand...
Click to collapse
I don't know of there is any KNOWN benefit
But i know that before when i had a bunch of battery issues and other things acting weird, i went ALL THE WAY to froyo, then rode all the ota's back to 2.3.4 and things seemed better for me.
Take with a grain of salt tho, i never did any "official" testing on it., just know it fixed weird issues i had with device not sleeping properly.
i was just suggesting it cause it it's easier than having to find and then wait for 2.3.4 sbf file to download If you already had the 2.3.3 file
So, now there is a gray triangle in the top right (which apparently stands for roaming) I checked my phone status and it reads
Network: Unknown
My Phone Number: 000-000-7729
I went against your advice because I already had 2.3.4, but that shouldn't have caused this, right?
few options
reboot
wipe data or just cache in android recovery
dial *228
turn on airplane mode or turn on wifi then turn off, reboot
all SBF or here ezSBF/ RSD lite/ SBF/ drivers by 1KDS or here
Droid SBF files http://sbf.droid-developers.org/
edit: some people with issues, have reported had to wipe data before and after, and even flashing SBF twice, before getting it fixed
but the options I listed first usually fix network connection errors
not listed in any order, just as they popped in my head
As stated above
Just dial *228
Should fix that
it gives you two options i believe.
Do both if first doesn't fix it
Thanks so much! If i could thank you more than once I would!
I had to leave for work and I was so bummed out my phone wasn't getting service.
All I had to do was activate it
2.3.5 (Still wish it was ICS) and rooted!
Thanks again!
The above instructions worked for me without factory resetting my phone and
without wiping any of my data my phone is now rerooted with the OTA Update 1.3.418.
1. DO NOT factory reset your phone or wipe your data.
2. Re-flash your DroidX2 with RSDlite using the original sbf file.
RSDlite:
http://forum.xda-developers.com/attachment.php?attachmentid=784077&d=1321414457
My original flash file here:
http://www.general-files.com/downlo...Z_MB870_4.5.1A-DTN-150-30_1FF_01.sbf.zip.html
3. Re-activate your phone with *228.
4. Using Pete’s Motorola RootTools_v1.07.zip run Pete's Motorola Root Tools.exe.
Wait for Pete’s root tool to finish.
5. Now that you are rooted again, run ota rootkeeper, press protect root.
6. Go to your phone settings, About Phone and click on system update and
download and install the OTA update 1.3.418 to your phone.
7. After the phone reboots, run the ota rootkeeper and restore root.
jt
Rooted 2.3.4 to rooted 2.3.5
I'm on 2.3.4, rooted. I have downloaded but not installed 2.3.5. I previously froze, but didn't delete bloatware using Titanium.
Do you think I can just install rootkeeper, defrost bloatware, then install 2.3.5 & keep root?
I'm kind of an idiot trying to keep it simple.
Thanks in advance,
George
Success!!! This worked nicely. It just took a long time to defrost the bloatware, then freeze even more bloat when it was re-rooted as there was so much on there.
OTA Rootkeeper is a thing of beauty, it's fast & noob-proof. Thanks for that!

Help OTA keeps failing

Im on MI1 and it won't allow me to install the new OTA. Keeps failing. Ive reset my phone, odined to the original stock and still the OTA fails. Help please
@kiilajoe are you still rooted? I had to unroot before it would take. I also had to completely remove SS. Not sure if you have recovery installed or not. There are a few people saying that OTA service is unavailable at this time as well. Update has not shown up in Kies yet so that is not an option. Not sure if a emergency recovery would work for you or not but could give it a try also. When you went back to stock did all the native apps reinstall. I had to go through MyApps in play store and manually install everything prior to upgrade.
Sent from my SCH-I545 using Tapatalk
You can ODIN back to stock 4.2.2 with http://forum.xda-developers.com/showthread.php?t=2484726 its non destructive so it will not wipe your device. However you will lose root. Then you can take the OTA with out issue.

Categories

Resources