Related
Hi all.
I'm looking for a car holder for my TP2. Can anyone make a recommendation? I'm UK based and I'd rather not pay silly amounts on delivery other than that I'm open to all suggestions?
So far I've seen and like the Boxwave car holder. Only problem is they're a US company and they charge quite a bit for non-US delivery.
Thanks in advance
I have this one http://www.amazon.co.uk/Brodit-car-...?ie=UTF8&s=electronics&qid=1254855076&sr=8-24
I combined it with my Richter holder (this one http://www.amazon.co.uk/HERBERT-RIC...3?ie=UTF8&s=electronics&qid=1254855152&sr=8-3 ) because I had a HTC Touch Pro before.
I have the CM929-S: Swivel Vent PDA Car Mount from Arkon that I got from eBay a while back for around $10. It works pretty well with the TP2, and I like it better than suction-cup mounts because it won't fall off. Although, I do like the idea of a unit-specific mount if I could find one.
http://www.buybits.com/product/sku_ark-swivel-pda-vent.aspx £9.99
neonoxDE said:
I have this one http://www.amazon.co.uk/Brodit-car-...?ie=UTF8&s=electronics&qid=1254855076&sr=8-24
I combined it with my Richter holder (this one http://www.amazon.co.uk/HERBERT-RIC...3?ie=UTF8&s=electronics&qid=1254855152&sr=8-3 ) because I had a HTC Touch Pro before.
Click to expand...
Click to collapse
Thanks neonoxDE!
the Richter holder looks perfect!
Wait Spartan: The richter holder I posted is for TOUCH PRO 1 not Touch Pro 2! You can use the Richter "arm" (don't know the right word) and add the brodit holder.
if you are going to go Arkon, may as well go with the powered mount
http://www.arkon.com/poweredpdamount.php?selFeat=usb_mini
the speaker is fairly useless... the TP2 speaker is louder
does have 2 USB charge port though, 1 at 1.2a (fast charge!) and another at 600ma
a little thicker than the none power version but worth it
so you can charge 1 phone and another device... or a friends phone too
I combine it with a proclip vechile mount and its perfect!
I just got the box wave kit. The quality is good and you can fit the TP2 in landscape with keyboard out and portrait.
They dont give you a dash disk to mount on your dash but suction cup is huge should mount on any window. They also give you a HVAC vent hook as well.
I'd give it a 7/10.
Try This
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Looks decent though passive only.
neonoxDE said:
Wait Spartan: The richter holder I posted is for TOUCH PRO 1 not Touch Pro 2! You can use the Richter "arm" (don't know the right word) and add the brodit holder.
Click to expand...
Click to collapse
Thanks neonoxDE but there's also a TP2 version
dezoris said:
I just got the box wave kit. The quality is good and you can fit the TP2 in landscape with keyboard out and portrait.
They dont give you a dash disk to mount on your dash but suction cup is huge should mount on any window. They also give you a HVAC vent hook as well.
I'd give it a 7/10.
Click to expand...
Click to collapse
Thx for the tip
SpartanGrey said:
Thx for the tip
Click to expand...
Click to collapse
I also have the Boxwave kit. Good quality. I have it attached to the vent. It was a pain getting it hooked up but once it was on it was great.
TP2 now functions as an easily accessible hands-free phone, mp3 player, and gps system. Man, I love this thing
I ordered this one
http://www.gpsforless.co.uk/product_details.php?id=16170
There were two on the site, and this one LOOKED less sturdy which was my only concern. Having said that, it turned up today and whilst I have not put it in the car yet, I am well pleased.
Much sturdier in reali life than the pictures suggest. Good selectioon of attachments etc. Way better than the ebay one I had for my Touch pro.
I was just about to ask the same question. Don't you just wish there was a genuine HTC one like the sexy HD2 mount...
s0leFUNK said:
I also have the Boxwave kit. Good quality. I have it attached to the vent. It was a pain getting it hooked up but once it was on it was great.
TP2 now functions as an easily accessible hands-free phone, mp3 player, and gps system. Man, I love this thing
Click to expand...
Click to collapse
Thanks I would be more than happy to buy the Boxwave goods but the shipping is too high. I'm UK based - it almost doubles the purchase costs
crazyC said:
I ordered this one
http://www.gpsforless.co.uk/product_details.php?id=16170
There were two on the site, and this one LOOKED less sturdy which was my only concern. Having said that, it turned up today and whilst I have not put it in the car yet, I am well pleased.
Much sturdier in reali life than the pictures suggest. Good selectioon of attachments etc. Way better than the ebay one I had for my Touch pro.
Click to expand...
Click to collapse
This looks more promising! Thanks!!
pjsmith said:
I was just about to ask the same question. Don't you just wish there was a genuine HTC one like the sexy HD2 mount...
Click to expand...
Click to collapse
To be honest I've been very disappointed with the lack of (widely) available accessories for the TP2....
velcro
spartangrey said:
hi all.
I'm looking for a car holder for my tp2. Can anyone make a recommendation? I'm uk based and i'd rather not pay silly amounts on delivery other than that i'm open to all suggestions?
So far i've seen and like the boxwave car holder. Only problem is they're a us company and they charge quite a bit for non-us delivery.
Thanks in advance
Click to expand...
Click to collapse
i use velcro , it's cheap and works fine
I just ordered this cheap nasty thing from ebay:
http://cgi.ebay.com/ws/eBayISAPI.dl...Category=20336&_trkparms=algo=LVI&its=I&otn=2
If it's rubbish, I'll throw it away... you can't really argue for $10!
p_shep said:
I just ordered this cheap nasty thing from ebay:
http://cgi.ebay.com/ws/eBayISAPI.dl...Category=20336&_trkparms=algo=LVI&its=I&otn=2
If it's rubbish, I'll throw it away... you can't really argue for $10!
Click to expand...
Click to collapse
Any report on this yet?
I buyed this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180422993926&ssPageName=STRK:MEWNX:IT
As shipped form Hong Kong it will take more than a month to arrive
Report later...
I know theres a thread on the Touch pro 2 Car mount but i dont know if any of those mounts work for the Tilt 2. I'm looking for something that fits nice and clips to the vent sturdy and also can rotate to landscape. I searched and searched and googled and cant find anything remotely good.
I bought a universal one but it was garbage
I know Proclip / brodit makes great car mounts but i cant justify paying 70 bucks for a car mount. ( 35 for the mount and 30 for the car mount part )
Sorry for making a new thread for this but i see a ton for the Touch pro 2 and still dont know if those will work with the tilt 2. Thanks for the help in advance
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4013wt_939
Anyone know if this will work with the Tilt 2?
dash mount
Best one I've found.... I hate Best Buy but they were the only ones in town with a decent mount. It was 24.99, a little more than I wanted to spend, but well worth it.
http://www.bestbuy.com/site/Xentris...lack/9072399.p?skuId=9072399&id=1218022585746
Nate
They should make a Better one
with charging dock like other Phones have
ilordvader said:
They should make a Better one
with charging dock like other Phones have
Click to expand...
Click to collapse
These days it seems like you're pulling teeth in terms of getting accessory developers to develop accessories for any non-iPod/iPhone devices...
This is the Bets one I found till now - HERE
most adjustable
I just ordered this one for a Tilt2. For $13 delivered it doesn't look to bad. I don't believe the TP2 exact fit ones will work with a Tilt2. I would be nice if one came out soon.
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
anit77 said:
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
Click to expand...
Click to collapse
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
marcini said:
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
Click to expand...
Click to collapse
I did it here.
Again I'm weary of TP2 exact fit holders. That one is labeled for T7373, the Tilt2 is T7377. There is a small size difference. It does look decent though.
I drive a GMC Sierra and have been looking for a dash or vent mount. A windshield mount puts the phone out of arms reach.
krystos said:
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
Click to expand...
Click to collapse
Actually this one is available. I've already got one in my truck for my Tilt 2.
be VERY careful with vent mounts. Your AC can make your phone cold causing it to condensate when you exit the vehicle and walk around outside ESP in high humidity areas thus voiding your warranty
proclip
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
moonwulf said:
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
Click to expand...
Click to collapse
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
DarienA said:
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
Click to expand...
Click to collapse
I have the same holder, and yes it does. It also allows you to open the keyboard.
igrip
i have the igrip custom mount for my fuze, i like it a lot, and the mount detaches from the goose neck. they make several mount options that can connect to the custom clip. the have one for my mountain bike, so i can attach it on the trails and use some of the gps features with a program i downloaded here on xda. They also have some more solid mounts that dont move around as much as the goose neck. I am getting a tilt 2 real soon, as soon as my contract is up for upgrade... (next week).. would love to find a custom clip for it that works with the igrip mounting options, has anyone seen one. i dont see a custom clip for the tilt 2 on their website.
igrip
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
kmartin888 said:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
Click to expand...
Click to collapse
Yeah i had a iGrip for the Fuze as well and i loved it. I am wondering if they say TP2 if they work with the Tilt 2. Im not sure if the specs are exactly the same or i would be buying this one here for sure
Take a look. Anyone know if this works with the tilt 2? I think i posted this earlier too and no one answered
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4110wt_939
The one
I think that this one will do it for ya
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspxhttp://images.google.com/imgres?img...M+Custom&hl=en&safe=off&sa=G&um=1&newwindow=1
Hello
As per the title I'm after a suitable Brodit mount that will fit the Optimus 7.
I just bought a new car which has the Brodit clip and a mount installed but it's for a different phone and my Optimus 7 doesn't fit.
If anyone knows which ones do fit please let me know!
Thanks
Hi, i've been looking for a decent holder, so far this is the only one i've managed to find, seems to made for the LG 7 http://www.londonmagicstore.co.uk/Car+Holders/LG/Optimus+7Q+E900/AIO+Premium+Car+Holder+%252526+Car+Charger+For+LG+E900+Optimus+7Q.html?osCsid=a5fcab7df689ac606da8422073250560
Haven't heard of them before so a bit hesitant to buy, I had a Brodit for my old orbit then the diamond, however after 3 years the suction was no more, so myself am looking for the whole thing. I've noticed most of the cheap ones are compatable with the brodit mounts if thats of any use.
*edit*
ordered item, i'll let you know what its like once it arrives
so far impressed with the holder!
can hold phone upright with easy sliding in our action, very secure unless you go over high jumps in the car then in my pop out, otherwise there is a clip attachment that allows you to hold the phone securly in landscape mode, haven't tried the it in the car yet as i've only just opened it. definatly not compatable with brodit clips tho. has a wierd scare mount system that seems to work fine.
I have always used Brodit cradles for all my devices over the last few years. I find them reliable, very strong and easy to put together.
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
nk33 said:
I have always used Brodit cradles for all my devices over the last few years. I find them reliable, very strong and easy to put together.
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
Click to expand...
Click to collapse
There are a few on ebay in the $12-15 range and some on Amazon in the $25 range. I just did a search for Samsung 7.7 vent mount.
sorry - for got to mention - i already bought one from ebay - that is the problem - hence my post
the ones on ebay are flimsy, lowsy horrible things...make sure you dont buy one. the ball and socket which allows it to swivel lost its stiffness after about 10 minutes of use and i just took it off. also the connection to the vent is weak at best. the connection to the actual plastic is so weak that when I turned a corner once the thing fell out!
i had a galaxy tab 7 inch and the brodit cradle for that was nice and solid - you would have to tug hard to move it anywhere - also the ball and socket was adjustable by just making the screw tighter
nk33 said:
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
Click to expand...
Click to collapse
Looks like they have now: http://www.brodit.com/newsDetails.html?id=120229
U r a legend! I been checking that site for months and gave up last week!
Always the way!
Hmm I've bought the official car mount already,
and i'm waiting it to arrive...
Just wondering, what's the advantage of car vent compared to car mount?
isnt' carmount more universal? because with this you have to choose clips specific to your car?
Very tempting, the good is that for my car, Dodge Caliber, there two options, the vent and center console, i might go with the center console option
Edit: i went to the US retailer website but they do not have the tab holder listed yet only the one for the original tab, but they do have the vent and center console mount, the mount is $29.99 a bit much and i wonder how much will be for the tab holder.
Sent from my GT-P6800 using xda premium
morkli said:
Looks like they have now: http://www.brodit.com/newsDetails.html?id=120229
Click to expand...
Click to collapse
It's not available in the US on the ProclipUSA website. Didn't know brodit and Proclip were somehow associated. Always bought Proclip, thinking it was designed and made in the USA? Maybe it is.
Whatever the case, I just called Proclip, it will be available in the USA next week, they'll send me an email about it. Can't order it right now.
RipplingHurst said:
It's not available in the US on the ProclipUSA website. Didn't know brodit and Proclip were somehow associated. Always bought Proclip, thinking it was designed and made in the USA? Maybe it is.
Whatever the case, I just called Proclip, it will be available in the USA next week, they'll send me an email about it. Can't order it right now.
Click to expand...
Click to collapse
thats good, please keep us updated
Finally got mine and it sits solid as a rock to the left of my HTC sensation XE!! sweeeet!!
bluetooth straight to audio my JVC AVX55 stereo!!! while the htc goes to the handseat bluetooth
I agree that Brodit mounts are superb - I got mine - Brodit Passive Car Cradle Holder Tilt Swivel for Samsung Nexus S (#511227) from Amazon UK. It is rock solid.
My Brodit from Proclip arrived Thursday. Its really nice. I originally had a ram mount in my truck for the Motorola xoom. The Proclip is nice but I ordered the console mount instead of the vent mount for Toyota 2005 Tacoma. I'm using the console mount piece as a cable organizer and just bolted the pro clip backing to the Ram mount fitting since the holes matched. I am hoping to post pictures and review soon.
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.