Today was I was watching the video on how to flash darky's resurrection.zip rom,
then zi tried flashing it to my wifes Vibrant , I folloeed the video step by step. I used odin I get the green light saying the phone passed then when it reboots it get stuck on the galaxyi900 screen and it doesnt boot up. Ive flashed the thing with odin at least 10 -15 times after and still no luck, it keeps getting stuck at the opening. My wife says if I dont fix it I have to buy her a new phone. Someone save me please!!!!!!
LMAO........... yeah my wife said the same thing...... sounds like you may have not disabled the voodoo lagfix before the flash.
you will probably need to flash back to stock. I am not sure what is stock on this phone I am going to assume it is the same Vibrant.
If you can get into recovery and you did have voodoo installed disable it. If not you can disable it on your phone and copy the folder and then load it into the internal sd card messed up phone and replace the old folder.
Then you may need to use Eugenes froyo that does not brick as a intermediary flash. if you can Odin that (use Odin 1.7) then when it you flash it do not check the repartition box. When it is beginning to reboot, do not let it fully reboot, pull the battery. Then Redo the Odin as described below:
Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Leave all check boxes the way they are. Check the repartition box.
Click the PIT button and select the 512.pit file
Click the PDA button and select T959JFD.tar and then click Start
When it is done you will be back at stock. Then Root the phone and go from there.
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
My phone just keeps flashing the opening Samsung galaxy s gt-i9000
Oh good I don't know the pit or .tar files sorry
Sent from my SGH-T959 using XDA App
Omar50 said:
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
Click to expand...
Click to collapse
take the battery out, wait 30 seconds, plug the usb cable in, and then hold both the volume buttons and slide the battery in. Presto! Download mode.
This has saved me numerous times lol. Then just flash JDF like oka said
i dont have problem entering download mode. When I flash with odin I get a pass on it. but when the phone reboots it stays on the opening screen go on and off
i download the heimdall suite 1.1.1 and the necessary windows program to run it. when i plug my phone into download mode heimdall start button isn't accessable. am i missing something?
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Omar50 said:
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Click to expand...
Click to collapse
Depends on what you smoke........
You may need the pit 513 file instead of the pit 512 file, these mapping files are a bit different and it may be a cause. Hard to know without seeing the phone
Also you could do a full wipe if you can get into recovery, wipe cache, phone reset and dalvik wipe (in advanced) then try That may work better for you.
It is recoverable.......... and also the best way to get your wife to calm down......... a romantic restaurant with candle light........ you go on Tuesday and she goes on Thursday........
Hope you get it fixed..........
thanks for the support but no luck I tried 513 pit nothing my phone still wont boot up I still get the opening screen then it shuts off and starts again.
im really having a bad day now i tried flashing the stock rom 2.2 with odin now the phone wont even power on! i guess its really a brick. i bought myself a paper weight
Related
I googled how to reset my phone back to factory settings and they gave me this link
"[STOCK ROM] Odin3 One-Click Downloader"
(cant link links)
i misread that it was for the captivate, and i went through with all the directions.
now my phone keeps flashing an AT&T bootscreen and i cant get it in recovery mode..
help?
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
nevermind, i found the Odin program for the samsung vibrant and re did it.. but i still have BOTH at&t boot screen at the tmobile vibrant boot screen.. anyone know how to get rid of that? it would be much appreciated thanks!
http://forum.xda-developers.com/showthread.php?t=741027
where did u find it.. please share..
Edit: NVM..
stepinmyworld said:
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
Click to expand...
Click to collapse
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Does not boot!
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
setzer715 said:
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Click to expand...
Click to collapse
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
stepinmyworld said:
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
Click to expand...
Click to collapse
I don't want your money, but if you PM me I will try to type up a detailed how to.
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Ok,
The_Chrome_Coyote really helped me!!!! Thank you so much and im back up and running. There was something missing from the original tutorial, not that we should be spoon fed but I didn't have the WinRAR program on my pc and didn't know I needed to extract anything. I was looking for exe. for it to be a program and just open it. It's a little more complicated than that. I added my additions in BOLD
The_Chrome_Coyote's Original post to me:
Odin isnt that hard, its just REALLY picky about working.
Firstly you need to download the Samsung drivers for your OS which can be found:
http://forum.xda-developers.com/showthread.php?t=728929
added:
Second you need to make sure you download WinRAR x86 (32 bit) 3.93 (google it and you should be able to get it) otherwise if your pc doesn't have a program to recognize rar and tar files, you are out of luck.
then read this thread from JAC:
http://forum.xda-developers.com/showthread.php?t=734475
1. Now, Extract ODIN from its .rar and place the .exe on your desktop
2. Extract the .pit file from its.rar and place that on your desktop
3. Place the JFD .tar file on your desktop but DO NOT EXTRACT
Now you can use ODIN
4. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file
5. Hit "PDA" button, and through ODIN select the .tar file
6. Plug your TURNED OFF PHONE into the USB cable
7. Wait for the Battery/ charging indicator to start
8. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
9. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasnt, unplug and plug your phone back in.
10. Dont select any options other than whats set at default.
11. Hit Start and be patient, takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute;
11a. Turn your phone off by pulling the battery.
11b. CLOSE ODIN
11c. Start at step 4 again.
ODIN needs to be open and ready to flash before the phone is plugged in, in my experience. Its very picking about this, and not everyone has this issue, but I did and following all these steps helped me flash my phone more times than I can count the other day haha.
Hope this helped! and your $20, donate it to Wes, JAC, or Eugene to keep them making great stuff for our phone.
Reply With Quote
Thank you thank you thank you
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
Same thing happened to mine when i tried odin. Now all i get sometime when it come on. are 7 rows of text that seems to be a code on screen in amber. Ishipped back 2 samsung. Since t-mobile won't take it after 14 days.
ok I screwed up guys.
I installed ROM manager from the market, flashed clockwork, it asked me if I wanted to partition and I said yes.
Now I just get a black screen at boot. I've managed to run odin and it says success. But I still just get a black screen after boot.
Little help?
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
daddysays said:
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
First: everyone was a noob at one time, so simmer down.
Second: Pleast post an update.zip that will make my phone work.
Cannot get past Galaxy S boot screen
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
jmoney1017 said:
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
Click to expand...
Click to collapse
If you can see the samsung logo you are fine. Load up recovery and try a full wipe first. If that fails then you can odin back to stock and root again.
Sent from my SGH-T959 using XDA App
1. If you have questions, there is a q and a forum for this device!!!!!!
2. THIS IS THE DEV PART OF THE FORUM. IE FOR DEVS POSTING STUFF FOR THE PHONE!!!!!
3. Learn how to Google. Not that hard. Example, you don't know what the *.rar extension is. GOOGLE IT!! Google knows everything.
4. If you don't have basic android or computer skills, don't try anything stupid. You do have a chance to brick your phone, even the pros like cyanogen have bricked their phones.
5. Don't offer cash for someone to fix your phone. Keep it in qna and some one will help you. Save your cash for the development that work hard on making these things work.
6. Can a mod please move this thread to qna.
7. THE MOST IMPORTANT THING. USE THE SEARCH FINCTION BUILT ONTO THE FORUMS. IT WILL SAVE YOU TIME AND THEN YOU WILL NOT LOOK LIKE NOOBS THAT JUST GOT THIS PHONE BECAUSE IT HAD AVITAR IN THE BOX!!!!!
Sent from my SGH-T959 using XDA App
cache.fs problem in odin
setzer715 said:
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
so i was wanting to load the bionix rom, so i did a nandroid on my last rom. bionix was "okay" so i decided i wanted to go back to my eugene rom.
so i use rom manager to load the old image, and while doing so it gives me some error that i should report to rom manager. i cant exactly say what it was. so i told it to reboot, but now im back on bionix, and all my apps are crashing. i cant get into the launcher or anything. so getting to rom manager was out of the question.
so i call my friend who says i probably need to load a stock image, which thats fine whatever. so i do some googlin' and i come across this method forum.xda-developers.com/showthread.php?t=734475 (new user..cant post links)
i try to follow the directions best i could. ive never used odin before. so for the "pit" i select the "samsung galaxy s firmware flasher" (which was the only file my computer let me pick) and for the pda part i selected t959uvjd.tar file they also had listed. also the instructions said i didnt need to select the other boxes (phone, csc, etc)
so i put it in recovery, hit start, after a few minutes my screen just shows the little android guy and a caution sign. odin still says "file analysis" and its been like this for about 20 minutes...
so....where do i go now? please be as descriptive as possible..apparently im still a lil green at all this
How did you get into recovery mode? Are you sure it wasn't download mode? Did you use the hardware way with vol up +dwn and power or did you use adb
http://lmgtfy.com/?q=did+i+brick+my+vibrant
splayer7 said:
How did you get into recovery mode? Are you sure it wasn't download mode? Did you use the hardware way with vol up +dwn and power or did you use adb
Click to expand...
Click to collapse
i used adb to get into recovery. i figured out its not bricked. i restarted it and its doing the same thing. by that i mean it boots up, but all my apps are crashing still..so i guess i gotta figure out how to actually use odin to mount the stock image.
before you use odin, make sure you are hardware unlocked. I bricked one that was hardware locked using odin. Read, read, read.
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
BossDj said:
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
Download mode for me is an android guy is IN a triangular caution sign & says "downloading..."
Stock recovery with the MENU button pressed shows me an android standing next to a caution sign. Think the op should clarify.
All~G1 said:
Download mode for me is an android guy is IN a triangular caution sign & says "downloading..."
Stock recovery with the MENU button pressed shows me an android standing next to a caution sign. Think the op should clarify.
Click to expand...
Click to collapse
I do remember the little andriod guy and the caution sign from the one and only time i got stuck in stock recovery. I can't boot to it with any button combo, but the first time I tried to make an update.zip myself, well, yeah i got rebooted to stock recovery. My mind went to dl mode when I read the op, as thats what I have the most experience using, and luckily can boot to that way easily on my phone. I think you are correct G1, op may be booting to recovery mode and attempting to flash, when dl mode is whats necessary.
Sent from my SGH-T959 (+ bionix 1.3 + kingklicks kernel = sexiness) using XDA App
BossDj said:
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
well origionally i was not in download mode, i only saw the screen i was talking about once, but i ended up actually getting it into download mode and using odin tried flashing the stock roms. it would hang everytime. the only rom i was able to get working was eugenes froyo port. its incredibly buggy and a whole lot of things dont work correctly on my phone. i tried the unlocking method to see if that helps, but my phone is really fighting everything i do right now.
but i do have a replacement coming, so im just gonna deal with a phone that wigs out whenever i try to do stuff for a few days.
I flashed a rom without voodo lagfix disabled so it messed everything so I reflashed the rom and it worked fine at first, everytime it turned off i had to re-flash a rom, so I decided to odin so it would work nomal and after the odin the phone boots then ges to black screen and only the touch buttons light up. I cant even get into recovery mode, only download. The phone just plays a little circle when trying to boot now. Also before I odined I formated the internal memory through setting-sd.. does that make a difference? Someone please help im terrified its a gonner..
Next time, these types of threads belong in Q&A.
Here's the fix I found in the BIonix thread. You were close by trying to use Odin, but you may want to try it in this order
"Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out.
So you forgot to disable the voodoo lagfix before you flashed a new rom and now you're getting an error, similar to the one posted below. Even Odin won't allow you to flash back to stock. Well, pay close attention and with some luck, you'll be good as rain...or something like that.
Fix 1:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Fix 2: (use only if you know how to use adb commands)
1. Place the 'disable-lagfix' file in your sdk>tools directory
2. Get into clockwork recovery like you normally would
3. Follow these adb commands to push the 'disable-lagfix' file to you sdcard>voodoo
adb push disable-lagfix /sdcard/voodoo
4. File should now be on your sdcard in your voodoo folder.
5. Reboot phone and with luck, you should hear Linda the robot telling you your file system is being converted back to rfs.
6. Because your system directory has already been wiped, you'll still get a black screen when you reboot, but your file system is back to rfs. Just pull the battery, and reflash whatever rom you want. Then reboot again."
Any of the above files can be found in the Vibrant bible thread.
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=771111
Uhhh
I did the steps to step 14 and during the proccess the phone turned off and no buttons or anything will work?? ...what do I do?
beckhamsoccerman said:
I did the steps to step 14 and during the proccess the phone turned off and no buttons or anything will work?? ...what do I do?
Click to expand...
Click to collapse
try this
cross your toes cuz this takes almost all your fingers to do!
start odin
plug in your usb
take the sim+ battery + storage out of your phone
with battery out plug in the usb while holding both volume keys
with the volume keys held down put the battery back in should put you back into DL mode hopefully.
backward0 said:
try this
start odin
plug in your usb
take the sim+ battery + storage out of your phone
with battery out plug in the usb while holding both volume keys
with the volume keys held down put the battery back in should put you back into DL mode hopefully.
Click to expand...
Click to collapse
Does it work's ?
My Vibrant is still beside Samsung ... but I aspect, that they will refuse to repair a Vibrant out of US.... >> no words about this one -- international company and they refuse to fix a broken Mobile, because is not from the local market >> IT'S A MOBILE!!! If I received it broken back ( but must pay for nothing , I need to reached the DL Mode. This is the only one, what I haven't try... (Recovery Mode not reachable) DL-Mode - no luck till now
All you need to do is odin stock and if you get the black screen install the last kernel you were running, this happened to me back when I first got my phone using voodoo ocv4, you didn't brick so no worries.
Sent from my SGH-T959 using XDA App
xavyi said:
All you need to do is odin stock and if you get the black screen install the last kernel you were running, this happened to me back when I first got my phone using voodoo ocv4, you didn't brick so no
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
He's not talking about a soft brick if I understand correctly.
Sent from my SGH-T959 using XDA App
Please post questions in the Q&A sub-forum instead of the development sub-forum. This thread has been moved.
Thank you
P.S. I hope you get the issues worked out.
Try the following: Get an odin version of voodoo*** (if you can't find one, it's not too hard to create one, let me know if you need help figuring out how to make one), then flash it. Hopefully from there you can get to the recovery, then adb push the disable lagfix file, then reboot the phone with the disable lagfix file in it until it tells you it's completed, then reodin to a working ROM.
***It's important that you odin in a working VOODOO kernel.
Ok i now Odined True 2.1 stock and it works however every time the phone turns off a little circle just keeps spinning there. and i cant do anything i try putting it into recovery but it goes straight to Download mode.
And it also says usb connected when it's not connected to anything..
I had the same issue with Voodoo, I fixed it flashing Eugenes Froyo that doesn't brick then back to Stock 2.1, Worked wonderfully. Its usually the fix for people that Soft Brick from Voodoo.
http://forum.xda-developers.com/showthread.php?t=740558
Do those steps then flash back to Stock 2.1 afterwards with Odin. Hope this helps.
Thanks ill try when I get home. Ive done the froyo to true 2.1 steps and I still can't restart or it screws everything up and I have to re-odin
beckhamsoccerman said:
Thanks ill try when I get home. Ive done the froyo to true 2.1 steps and I still can't restart or it screws everything up and I have to re-odin
Click to expand...
Click to collapse
Hey so that trick did bring your phone alive again? did i understand the OP correctly? the phone was completely dead, no power no nothing right? im not sure about why the usb port would be doing that.
backward0 said:
Hey so that trick did bring your phone alive again? did i understand the OP correctly? the phone was completely dead, no power no nothing right? im not sure about why the usb port would be doing that.
Click to expand...
Click to collapse
Yeah for a little it was completely broke. I held volume buttons for like 2 minutes straight and it finally went into download mode. I've just got a rom flashed right now and im too scared to turn it off to see if it will work. Every time I do it, i get the little circle thing like its plugged in but it does nothing. Ill just leave it on till I find a solution.. No matter what thing I odin it doesnt fix the circle of death
Hmm. That's strange. Did you check repartition after flashing back from froyo?
Sent from my SGH-T959 using XDA App
Yea I did. No results. It's my buddies vibrant it's not even mine
So, I decided to root my phone and put J16ROM Bionix 1.7 OCUV Voodoo J16. I back up my old ROM just in case. After successfully flashing the new rom, I was really happy with how fast my vibrant became w/o lag. However, I forgot to write down contact info and my password from password safe. So, I was kinda glad that I backed up old ROM. I tried to recover my old rom from ROM manager and thats where my phone gave up on me. It was recovering just fine until it hit data session. It has been there since yesterday and has not moved. I turned it off this morning and it automatically turned back on and went into recovery mode.
So, as of right now, I have access to phone recovery boot menu and clockwork recovery menu. I tried doing the same recovery method but it froze on me at the same exact spot. Did I mess up my phone???
Did you disable Voodoo before you tried to go back to stock?
Sent from my SGH-T959 using XDA App
i would say no, thankfully if you can get to recovery your phone is far from dead, but you should prob flash a stock rom through odin, READ Bionix fix for flashing without disabling voodoo, let me know if you need more info. but you should be alright, remember that your stuff (contacts, etc) are backed up to gmail.
You didn't disable Voodoo before trying to do the restore... did you.
This is the only way to save it now, good luck.
Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out. So you forgot to disable the voodoo lagfix before you flashed a new rom and now you're getting an erro you'll be good as rain...or something like that Fix 1 1. Download Eugenes 'Froyo that does not brick' file. 2. Extract the files. 3. Open Odin, plug in your phone, then put it into download mode. 4. load the PIT file in appropriate area. 5. load the .tar file in the PDA area. 6. DO NOT check 're-partition' 7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DO s what's supposed to happen 8. Now, pull your battery. 9. Download the 'True stock 2.1 firmware for the vibrant'. 10. Extract the files. 11. Once again, open Odin, plug in your phone, put into download mode. 12. Load the PIT file into the appropriate area and the .tar in the PDA area. 13. THIS TIME you want to check the 're-partition' box. 14. Now click start, let it finish, and this time your phone will load up just fine! BAM Fix 2: (use only if you know how to use adb commands) 1. Place the 'disable-lagfix' file in your sdk>tools directory 2. Get into clockwork recovery like you normally would 3. Follow these adb commands to push the 'disable-lagfix' file to you sdcard>voodoo adb push disable-lagfix /sdcard/voodoo 4. File should now be on your sdcard in your voodoo folder. 5. Reboot phone and with luck, you should hear Linda the robot telling you your file system is being con rfs 6. Because your system directory has already been wiped, you'll still get a black screen when you reboot system is back to rfs. Just pull the battery, and reflash whatever rom you want. Then reboot again.
Yea I did not disable Voodoo. I thought I would not need to do that since I am going back to original stock. Can you explain it to me how to get back to stock version and how to disable voodoo from recovery mode? Thanks!
read the first page of Bionix thread, it explains everything.
OP this is posted in the wrong section . Belongs in in Q&A .
sorry.. I was panicing and did not know where to post it obviously. One last question, how to get my phone to download mode.
turn phone off, insert usb , wait for battery to start charging, hold down both volume up and down, press power button until screen goes black, then let go of power button but keep holding vol up and down, you'll then see the yellow digger.
kiladubz said:
turn phone off, insert usb , wait for battery to start charging, hold down both volume up and down, press power button until screen goes black, then let go of power button but keep holding vol up and down, you'll then see the yellow digger.
Click to expand...
Click to collapse
Man.. I feel bad to keep asking questions. My computer won't recognize the phone even though my phone is in download mode.
disconnect usb, open Odin, load .pit and .tar, then reconnect usb, com should appear.
I mean Odin won't recognize my phone even though I was following the step
are you using odin 1.0 or 1.3? 1.0 i remember had issues recognizing the device, 1.3 works flawlessly. also, do you have the usb drivers installed? everything can be found in the Vibrant "Bible".
kiladubz said:
are you using odin 1.0 or 1.3? 1.0 i remember had issues recognizing the device, 1.3 works flawlessly. also, do you have the usb drivers installed? everything can be found in the Vibrant "Bible".
Click to expand...
Click to collapse
Thanks I am trying it right now with odin 1.3.
i had to install drivers to get odin 1.3 to recognize the phone, sounds like you need to do the same
Yes, install the samsung drivers, then do odin
Seems like 1.3 is doing the trick for me.. Its going!!!
Man.. I can't seem to download truestock 2.1 firmware for vibrant.. Anyone can upload it for me? Thanks.
yeah i noticed a few days ago that the links were dead, i have it in my downloads.......ok, uploading it now, will provide link when done.
Flash Eugene's Froyo that won't Brick... it will repartition your phone and get rid of everything, including bad kernels... then flash back down to JFD...
Or send your phone to me... $20 bucks since it's a brick...
Hello,
Please read the WHOLE post, as I've already done hours of XDA research and could not come across a similar situation.
I'm afraid that after months of flashing away, I've finally bricked my phone (for good).
I was ODINing back to stock from CM7, but something went wrong and ODIN froze. Not thinking it was a big deal, I took out the USB cable out.
This prompted my phone to not respond at all (no power, no recovery combo). However, searching around XDA, I found the way to enter download mode (through the plug in USB then plug in battery while holding volume buttons trick). I flashed the Froyo bootloaders, thinking that my bootloader was corrupted. This made the phone turn on to the "VIBRANT" screen, but nothing else. I still could not get into recovery mode through the 3 button combo.
I then proceeded to ODIN a JFD image, along with the 512 pit file. This put my phone into a non-responsive (read: no buttons work) state again, and so I flashed the Froyo bootloaders again. Once again, I was stuck at the "VIBRANT" screen.
Then I ODINed a JFD image without repartitioning with the 512 pit file. This continued to put my phone at the "VIBRANT" screen.
What went wrong?
I read up something about JTAG service; is this what I need? (From what I read, if you can access download mode, you're good to go, so I'm not sure if I "hard-bricked" my phone)
THANKS so much...
if you were on cm7 it was 2 button
3 button is for recovery
battery out\ reinsert battery
press volumeup\down insert usb cable.... downlod should appear
odin to stock
Sugartibbs said:
if you were on cm7 it was 2 button
3 button is for recovery
battery out\ reinsert battery
press volumeup\down insert usb cable.... downlod should appear
odin to stock
Click to expand...
Click to collapse
I can get into recovery, and I can ODIN to stock, but my phone is continually bricked--in fact, if I ODIN to stock, my phone doesn't turn on. (I know I'm doing it correctly because I've done it successfully before)
R you ona 3g samsung vibrant?
Sugartibbs said:
R you ona 3g samsung vibrant?
Click to expand...
Click to collapse
Yes, I have the original 3G Samsung Vibrant.
Sorry, but i had to ask, when you come out of odin and have green pass you should come out in recovery and either reboot or have an error message, yet you have the vibrant logo, is reboot checked? If all ese fails Aio toolbox, then you know pit, pda and if necessary drivers are correct. and not corrupted.
This is gonna take a bit more searching but your gonna have to find Eugene's froyo that doesn't brick. Odin that and then Odin back to stock maybe you can pm him for the files.
Sent from my SGH-T959 using XDA App
Sugartibbs said:
Sorry, but i had to ask, when you come out of odin and have green pass you should come out in recovery and either reboot or have an error message, yet you have the vibrant logo, is reboot checked? If all ese fails Aio toolbox, then you know pit, pda and if necessary drivers are correct. and not corrupted.
Click to expand...
Click to collapse
Thanks for all your help!
I figured out the problem--apparently the PDA file was corrupted. Internet here is spotty, so I guess it corrupted while downloading. I flashed the re-downloaded PDA file, and was able to un-brick my phone.