Related
Hey all,
I am able to flash new roms, and after it does its looping i can get everything up and running, service, 3g, etc. Once i do a reboot and it loads up the rom again, i get no service, and a FC error saying "Process system is not responding"
Does anyone know the cause or how to fix this?
More info: i started on bb55 CM6.1.3 v4.5.7, upgraded to v06 and got this error
THEN i had to repair via sony pc companion, back to Rogers rom. then installed tripnmiui final, everything worked. once i rebooted i got no signal and fc msg.
Only thing i can possibly think of is your making some kind of error in the installation process of your ROMs. Repair your phone once again and follow the steps carefully on flashing new ROMs. Sounds like it could be a possible basebrand problem as well because Tripnmiui runs on basebrand .49 and .52. Should have a clean installation if you follow the steps carefully =)
thanks for the reply!
for the installation of tripnmiui i installed the rom and then changed the bb to 52. The rom was up and running, and i was able to get all services, but once i rebooted, nada...
Hi all...
I just got my first Android phone... is an X10i...
I have version 2.1-update1 on it, and i tried 2 custom roms (2.2) with the install from SDcard.
After installing first rom (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip) the result you can see it here: 220.ro/documentare/MOV01113/AVtgAccdjh/
After this, i instaled the 2nd rom (FreeX10-beta4.zip + gapps_FreeX10.zip); the result was: it work perfectly but after 30 seconds it was rebooting. it never stops.. the phone start again, and after 30 seconds , again reboot... and so on.
I must mention that the phone is SIM locked, and to work in my network i must unlock it... can this be a problem? if not can any one help me to fix this?
Or can anyone tell me where to find a custom rom that can be flashed with x10flasher? because when i install the rom from SDcard, is loading normally untill 50%, but when it reach 50%, he instantly go to 100%
Some info about my phone:
model: x10i
firmware: 2.1-update1
baseband: 2.1.54
kernel: 2.6.29
Can anyone tell me what is the problem and advice me what to do?
Thanks in advance.
SE-X10i said:
Hi all...
I just got my first Android phone... is an X10i...
I have version 2.1-update1 on it, and i tried 2 custom roms (2.2) with the install from SDcard.
After installing first rom (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip) the result you can see it here: 220.ro/documentare/MOV01113/AVtgAccdjh/
After this, i instaled the 2nd rom (FreeX10-beta4.zip + gapps_FreeX10.zip); the result was: it work perfectly but after 30 seconds it was rebooting. it never stops.. the phone start again, and after 30 seconds , again reboot... and so on.
I must mention that the phone is SIM locked, and to work in my network i must unlock it... can this be a problem? if not can any one help me to fix this?
Or can anyone tell me where to find a custom rom that can be flashed with x10flasher? because when i install the rom from SDcard, is loading normally untill 50%, but when it reach 50%, he instantly go to 100%
Some info about my phone:
model: x10i
firmware: 2.1-update1
baseband: 2.1.54
kernel: 2.6.29
Can anyone tell me what is the problem and advice me what to do?
Thanks in advance.
Click to expand...
Click to collapse
For now you can only flash stock 2.1 roms using the flashtool, everything else you have to use xrecovery.
As far as your phone being sim locked, I really don't think that's related to any of the issues you've mentioned.
Here's what I suggest:
- use the flashtool to flash it back to stock 2.1
- root
- install xrecovery
- try Wolfbreak's custom 2.2 rom from here
http://forum.xda-developers.com/showthread.php?t=945264
the instructions on the first post are kinda confusing but let me know if you have any other questions. Make sure to use the thanks button if any of this helps.
To install custom ROMs, your phone needs to be rooted and then install the ROMs via xrecovery.
Also for Trip's Froyo or Gingerbread ROM, it is preferable to on bb49..
GUIDES:
For changing BB: http://forum.xda-developers.com/showthread.php?t=960527
For Trip's 2.2 ROM: http://forum.xda-developers.com/showthread.php?t=1013210
Instruction for Flashtool : http://forum.xda-developers.com/showthread.php?t=928343
thanks to both for fast answer...
***********************************
@Lockon Stratos
this rom is working good, is only rom that installs properly and work without reboot, but SDcard is not working, and when i applyed the hotfix, it enter into a reboot loop
@regencyhood
i tried MIUI... same problem... reboot loop
***********************************
i tried again all roms that i have downloaded until now from here, but unsuccessfully
I do not understand why, but ROMs are not installed correctly (i have root and xrecovery installed, i made factory restore, wipe cache, format cache, wipe dalvik cache).
so i think i will stay on 2.1
I was very enthusiastic when i got it, but i see that is not such a great phone with no official update for 2.2, and is low on internal memory (only 465MB data memory and 280MB RAM).
SE-X10i said:
thanks to both for fast answer...
***********************************
@Lockon Stratos
this rom is working good, is only rom that installs properly and work without reboot, but SDcard is not working, and when i applyed the hotfix, it enter into a reboot loop
@regencyhood
i tried MIUI... same problem... reboot loop
***********************************
i tried again all roms that i have downloaded until now from here, but unsuccessfully
I do not understand why, but ROMs are not installed correctly (i have root and xrecovery installed, i made factory restore, wipe cache, format cache, wipe dalvik cache).
so i think i will stay on 2.1
I was very enthusiastic when i got it, but i see that is not such a great phone with no official update for 2.2, and is low on internal memory (only 465MB data memory and 280MB RAM).
Click to expand...
Click to collapse
Reason for Reboot on MIUI is because you are on baseband 54 (i.e 2.1.54)....
Recommended baseband is 49, either you flash and change your bb or you can apply a patch... all the necessary help regarding bb is given in the link in my above post...
hope i was helpful
So which one do you want to use trip's froyo or Z's froyo? I hate to say this but I have a feeling it's something you're doing in between installs that could be causing the problem. I say pick one that you want to use/test, flash back to stock 2.1 using je flashtool, root, install xrecovery then flash just one of the custom froyo roms using xrecovery.
Sent from my X10i using XDA App
Patch BB 54 or rollback BB 52
Lockon Stratos said:
So which one do you want to use trip's froyo or Z's froyo? I hate to say this but I have a feeling it's something you're doing in between installs that could be causing the problem. I say pick one that you want to use/test, flash back to stock 2.1 using je flashtool, root, install xrecovery then flash just one of the custom froyo roms using xrecovery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
what i want is a version of froyo that look like official one...
something like the ROM from TripNRaVeR (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip)
sorry for the link from my first post... i hope this is working : youtube.com/watch?v=iV408mrlWqA
this is how is working the Rom from TripNRaVeR (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip) on my phone
edited:
regencyhood said:
Reason for Reboot on MIUI is because you are on baseband 54 (i.e 2.1.54)....
Recommended baseband is 49, either you flash and change your bb or you can apply a patch... all the necessary help regarding bb is given in the link in my above post...
hope i was helpful
Click to expand...
Click to collapse
so... if i downgrade baseband to 2.1.49, the rom from TripNRaVeR will work to?
and i want to know if appeared any fix for camera for the rom from TripNRaVeR?
so... if i downgrade baseband to 2.1.49, the rom from TripNRaVeR will work to?
and i want to know if appeared any fix for camera for the rom from TripNRaVeR?[/QUOTE]
Yes, it will work.
Regarding the camera I am using "TripNMiUI FINAL 1.0.63" ROM, and the camera is working a-OK. (Pic and Vid included)
Zoom results in FC for me in the stock and MIUI camera app, because of which I use Vignette....
Was adding another post, but thought it was not helpful..now i dont know how to delete a post
as i said in title i always encountered this last 2 weeks i use cm6 wolfbreak rom and the other icon is not appearing and even xrecovery i cant access. so i decided to switch rom in tripnraver iris 1.5.5 and this happen again to me now it's say system is not process same problem other icon not appear and i cant access xrecovery, sd card and no signal. i try to crash system server but not showing. can anyone encountered this before? and anyone how to know to solve this?
Flash the correct baseband
i did! i dont what is the true problem anyone known this?
I got the SD card and the no signal problem the other day, was my baseband, other could be that the baseband youre using is not supported by the rom, the last thing I could think of is that your Firmware-baseband are not compatible
before i flash a custom rom i read entire post and check what baseband need and compatible. so im sure im not applying the wrong baseband, maybe not baseband is problem.
i applyed the WB ROM to this phone, and after the ftf bundle, and since that moment its been rebooting gain and again, ive tried with official rom, doomlord image, rendeiro´s image and nothing no ROM seems to work with this phone, is there a way to downgrade to 2.1? or apply a tweak, seems like the phone doesnt like BB 71,
upper20c said:
i applyed the WB ROM to this phone, and after the ftf bundle, and since that moment its been rebooting gain and again, ive tried with official rom, doomlord image, rendeiro´s image and nothing no ROM seems to work with this phone, is there a way to downgrade to 2.1? or apply a tweak, seems like the phone doesnt like BB 71,
Click to expand...
Click to collapse
hmm u shudnt really have ny problems it is recommended to be rooted and have xrecovery prior to going onto 2.3.3, unless ur already on 2.3.3 where all u gta do is flash the zip provided using xrecovery
i flashed the phone following the instructions, this is the second xperia that i flash to 2.3.3 first was mine (working wb 3.8.0 features) and the one that keeps rebooting is my sister´s phone.
its weird, the phone is working but its rebooting when i try to make a call, i can receive calls, not to initiate one, wifi is working ok, but if try to configure the mobile data connection it reboots as soon as it starts to communicate, and keeps rebooting, some help please
seems like the baseband is giving me problems, the phone was working the whole weekend on 2G, without mobile data connection, now i entered the APN´s, and switched to 3G and it reboot over and over, doesnt letme change the connection mode to 2G again
I recently picked up an Xperia X10 to use with my straight talk service. I rooted and unlocked the bootloader just fine using flashtool; edited the APN settings and have a functional phone. But, whenever I try flashing a new ROM, I get into some trouble. First, my wifi never works. I read that's a common thing and tried flashing the zip to fix it; no go. Secondly, I lose service with the new ROM; again, common thing, and I've found fixes. I'd try the kill services command through terminal emulator, but that brings me to my third issue. I lose access to my SD Card; it won't mount it at all with the new ROM, except for when I'm in xRecovery. I have an Xperia X10a from AT&T, running official Android 2.1. Firmware is 2.1.A.0.492 and baseband 2.1.65. I've tried various ROMs that are compatible with this baseband, including FreeXperia from Achotjan; all with the same results. Is it necessary to flash your baseband even if the ROM is verified for your current baseband? Am I missing some critical step here? Sorry if this is in the FAQs somewhere; I've read the stickies in here and the development section 3 or 4 times each (I get bored at work ), and didn't see it anywhere. TIA
RadRacer said:
I recently picked up an Xperia X10 to use with my straight talk service. I rooted and unlocked the bootloader just fine using flashtool; edited the APN settings and have a functional phone. But, whenever I try flashing a new ROM, I get into some trouble. First, my wifi never works. I read that's a common thing and tried flashing the zip to fix it; no go. Secondly, I lose service with the new ROM; again, common thing, and I've found fixes. I'd try the kill services command through terminal emulator, but that brings me to my third issue. I lose access to my SD Card; it won't mount it at all with the new ROM, except for when I'm in xRecovery. I have an Xperia X10a from AT&T, running official Android 2.1. Firmware is 2.1.A.0.492 and baseband 2.1.65. I've tried various ROMs that are compatible with this baseband, including FreeXperia from Achotjan; all with the same results. Is it necessary to flash your baseband even if the ROM is verified for your current baseband? Am I missing some critical step here? Sorry if this is in the FAQs somewhere; I've read the stickies in here and the development section 3 or 4 times each (I get bored at work ), and didn't see it anywhere. TIA
Click to expand...
Click to collapse
I would suggest you upgrading 2.3.3.
You can find ftf files for 2.3.3 in my signature. unzip the files to get ftf.
You can flash american generic or global generic version. All will work for you.
flash the ftf using flashtool.
Here's a guide to use flashtool : http://forum.xda-developers.com/showthread.php?t=928343
RadRacer said:
I recently picked up an Xperia X10 to use with my straight talk service. I rooted and unlocked the bootloader just fine using flashtool; edited the APN settings and have a functional phone. But, whenever I try flashing a new ROM, I get into some trouble. First, my wifi never works. I read that's a common thing and tried flashing the zip to fix it; no go. Secondly, I lose service with the new ROM; again, common thing, and I've found fixes. I'd try the kill services command through terminal emulator, but that brings me to my third issue. I lose access to my SD Card; it won't mount it at all with the new ROM, except for when I'm in xRecovery. I have an Xperia X10a from AT&T, running official Android 2.1. Firmware is 2.1.A.0.492 and baseband 2.1.65. I've tried various ROMs that are compatible with this baseband, including FreeXperia from Achotjan; all with the same results. Is it necessary to flash your baseband even if the ROM is verified for your current baseband? Am I missing some critical step here? Sorry if this is in the FAQs somewhere; I've read the stickies in here and the development section 3 or 4 times each (I get bored at work ), and didn't see it anywhere. TIA
Click to expand...
Click to collapse
Download SEUS and upgrade your phone to stock gingerbread2.3.. it has the baseband required... then use flashtool to root and unlock....
Remember every custom ROM has different kernel... for example FDP ROMs run on FDP kernel.. x10s runs on doomlords modified kernel... feralab kernel is for feralab ROMs.. so you need to be careful.. good luck...
Sent from my Transformer TF101 using xda app-developers app
OK, I flashed the American gingerbread ftf. Everything appears to work except my SD card. I tried mounting through terminal, tries formatting from both the phone (xRecovery) and computer (USB adapter) and nothing. Suggestions?
RadRacer said:
OK, I flashed the American gingerbread ftf. Everything appears to work except my SD card. I tried mounting through terminal, tries formatting from both the phone (xRecovery) and computer (USB adapter) and nothing. Suggestions?
Click to expand...
Click to collapse
did you try another sd card?
does usb tranfer work by connecting to pc?
THeLogiC said:
did you try another sd card?
does usb tranfer work by connecting to pc?
Click to expand...
Click to collapse
Don't have another SD card, but it did this before. Once I restore to 2.1 it works fine. It does USB mode through xRecovery, haven't tried while Android is running.
RadRacer said:
Don't have another SD card, but it did this before. Once I restore to 2.1 it works fine. It does USB mode through xRecovery, haven't tried while Android is running.
Click to expand...
Click to collapse
thats strange. if it works in 2.1 it should in 2.3.3 too
RadRacer said:
Don't have another SD card, but it did this before. Once I restore to 2.1 it works fine. It does USB mode through xRecovery, haven't tried while Android is running.
Click to expand...
Click to collapse
I had the same issue when I upgraded to 2.3.3 from 2.1 I had to buy new SD card... but my old one worked just fine with other.. sometimes these things happen..
Sent from my Transformer TF101 using xda app-developers app
Reformatted again and now it works:good:
RadRacer said:
Reformatted again and now it works:good:
Click to expand...
Click to collapse
glad to hear that