Hey, a question...
I flashed the 2.8v, which I thought included the EB16 kernal, but the phone still says EB01 on the "About phone" thingie in Settings. Now, I just flashed the EB16 voodoo zip file on the first page of Adrynl's thread...it still says EB01.
I'm running fine, GREAT, really, but justr wondering where to look so I know I have the EB16 running, and if I am still on EB01, then....why?
Thanks guys, and thanks Adrynl for the fantastic work.
Jeff
You are on EB16 unless you flashed the EB01 kernal after installing SC2.8v.
The only way to check which kernel you are on is by running a command.
Check out post 2178 in the superclean thread (page 218).
bltl211 said:
You are on EB16 unless you flashed the EB01 kernal after installing SC2.8v.
The only way to check which kernel you are on is by running a command.
Check out post 2178 in the superclean thread (page 218).
Click to expand...
Click to collapse
I flashed sc2.8v yesterday, and I also still has EB01, and i didnt install eb01 kernal after installing sc2.8, i checked it following the command, shows sat Jan 2, which i assume eb01.
not having any problem so i am not complaining, just curious.
kundoc said:
I flashed sc2.8v yesterday, and I also still has EB01, and i didnt install eb01 kernal after installing sc2.8, i checked it following the command, shows sat Jan 2, which i assume eb01.
not having any problem so i am not complaining, just curious.
Click to expand...
Click to collapse
Jan 2... that would be closer to DL30. Did you come from a DL30 version of Super Clean?
Just to make it confusing for you all:
There are currently 6 kernels floating around. EB01 voodoo and non-voodoo, EB16 voodoo and non-voodoo (included with SC2.8), and another set of EB16 voodoo and non-voodoo kernels that were an attempt to fix all the conversion problems (but at the same time introduced a BT bug).
Depending on which kernel you have, you might be getting a different result for the date. It depends on which files they used for that kernel.
If you find that you aren't on the kernel you thought you were, but you are happy with its performance, you might want to think about just sticking with the kernel you have since there isn't a huge difference between them. Everything will get sorted out soon enough.
Related
For some reason my apps keep forceclosing on superclean 2.8 and also which launcher does this come with it-is it the launcher 2.1 cuz there's a patch for stock launcher 2.2 I think?
EDIT: Also when I click on the vzw 3g mobile hotspot it gives me a warning that I have to enable it by Verizon bit than it hives me options of enabling it... can we enable it mow cuz of the dummy tether module??? :/ Quote confusing...
What were you running before 2.8? Voodoo or nv?
Did you wipe cache or data or davlick cache?
If we don't know where you were, can't help you get to where you want to go.
vlucchetti said:
What were you running before 2.8? Voodoo or nv?
Did you wipe cache or data or davlick cache?
If we don't know where you were, can't help you get to where you want to go.
Click to expand...
Click to collapse
Yeah sorry. I was running stock 2.1 ea8 update than odined to Dl01 back to stock-flashed superclean 2.6v and converted to voodoo trying to than flash 2.7 which was unsuccessful. Than 2.8 came out so odined back to dl01 and flashed superclean 2.8 which didn't work so had to re-odin and flash everything about 5 times but it never converted to voodoo. So started fresh by odining back to stock Dl0-wiping data, factory reset, cache, and dalvik cache-than flashed superclean 2.6v-making sure to wipe everything again before flashing, converted to voodoo successfully so than flashed superclean 2.8 wiping everything again. Everything worked just some apps would forceclose, like words with friends, sometimes browser and wells Fargo app.
And is it just me or does the vibrate feature seem different... like it vibrates differently? :/.
Stock than voodoo 2.6 and than voodoo 2.8.
And yes I wiped everything-i even at one point tried wiping dbdata, boot, system, ddata, ext data... than mounted everything-system, dbdata, data, and one other thing. which made me get stuck at aamsung logo when trying to boot.
Start with a Superclean version that doesnt have the EB16 kernel, think 2.4 was the last to use the EB01 kernel. Flash it, boot up and then flash 2.8
mob87 said:
Start with a Superclean version that doesnt have the EB16 kernel, think 2.4 was the last to use the EB01 kernel. Flash it, boot up and then flash 2.8
Click to expand...
Click to collapse
Oh is the forceclosing not normal? And you saying to revert back to Odin stock-wipe everything again-than flash superclean 2.4 then 2.8?
Btw you know anything bout the vzw 3g mobile app? Cam we use it or do we still have to pay and sign up from Verizon? Cuz tjats the first time that option popped up.. :-/
The conversion process in teh EB16 kernels are borked I believe. So yes, Odin then flash 2.4 then 2.8. The dummy module just doesnt report tethering, its not a hack for the stock app. You have to use wifi tether in the market or the like.
mob87 said:
The conversion process in teh EB16 kernels are borked I believe. So yes, Odin then flash 2.4 then 2.8. The dummy module just doesnt report tethering, its not a hack for the stock app. You have to use wifi tether in the market or the like.
Click to expand...
Click to collapse
Ah so apps forceclosing are not normal... damn. I've already odined so many times... oh well. Really? That's weird than cuz before on 2.1 when it gave you the warning it just gave you the warning but this time on 2.2 after the warning it asks if you want to turn it on, turn it off, or close the app... so if I put turn it on would it automatically sign me up for the tethering option in vzw or would it just give me an error message since I'm not signed up for it on vzw? :/. And what quadrant scores are considered normal for voodoo cuz I've heard of scores ranging from 1400-1800 but I only got 1350 or something like that-ranked underneath nexus one with 2.2.
Thanks by the way.
EDIT: Btw do I have to disable voodoo first before odining back to Dl01 or just Odin it back since Dl01 Odin deletes everything including voodoo? :/
Slic|< said:
Ah so apps forceclosing are not normal... damn. I've already odined so many times... oh well. Really? That's weird than cuz before on 2.1 when it gave you the warning it just gave you the warning but this time on 2.2 after the warning it asks if you want to turn it on, turn it off, or close the app... so if I put turn it on would it automatically sign me up for the tethering option in vzw or would it just give me an error message since I'm not signed up for it on vzw? :/. And what quadrant scores are considered normal for voodoo cuz I've heard of scores ranging from 1400-1800 but I only got 1350 or something like that-ranked underneath nexus one with 2.2.
Thanks by the way.
EDIT: Btw do I have to disable voodoo first before odining back to Dl01 or just Odin it back since Dl01 Odin deletes everything including voodoo? :/
Click to expand...
Click to collapse
You dont need to disable voodoo when you odin full package.
Ok thanks. But about the vzw 3g app what would happen if I click to turn it on?
Apologies if this is posted in the wrong place. And, yes, I did search first. I am on SC 2.9.1 EB01 voodoo. I have not updated to the new kernel. I did flash the MMS patch. My problem is that I can not receive MMS. At least two people have sent me pictures via MMS, and I receive a message saying downloading but no pic. Haven't tried to send any. Any suggestions? Thanx in advance.
I know SC 2.9 required the DL09 modem, I assume 2.9.1 would require the same? I know my messaging didn't work properly in 2.9 until I flashed the DL09 modem. Then no more messaging quirks like you mentioned. On a side note my GPS performance also improved to.
Have you tried these? Adrylalyne has been up to his usual greatness, making stuff better for us. I am runnung SC 2.9.1V, eb16 rom, and eb01 kernal, with zero problems and heavy data, txt, and phone usage.
http://forum.xda-developers.com/showthread.php?t=948679&highlight=eb01+modem
Samsung MMS (stock, eb01)
Voodoo
eb16_voodoo_working.zip
It appears that I have an almost identical set up to yours with SC 2.9.1 but I have not upgraded to the new EB16 kernel as the last one was a fail. Three separate people have sent me pictures by MMS, and none were successfully received. I today re-flashed the EB01_mms patch without success. SMS and email seem to be working fine.
OhioYJ said:
I know SC 2.9 required the DL09 modem, I assume 2.9.1 would require the same? I know my messaging didn't work properly in 2.9 until I flashed the DL09 modem. Then no more messaging quirks like you mentioned. On a side note my GPS performance also improved to.
Click to expand...
Click to collapse
What gave you the idea that SuperClean 2.9 requires the DL09 modem? That is most certainly NOT true. In fact, Adynalyne recommends NOT using the DL09 modem if I remember correctly. But, just pointing that out, that information is dead wrong. The recommended modem is EB01.
I Odined back to EB01 according to Adrynalyn's post, then reinstalled SC2.6 and pictures aarrived with mms. Same with 2.8 and 2.9.1. Adding Super Dark or Nitro Dark Eclipse theme resulted in inability to receive pix by mms. I tried all the variations, and this is the problem without a doubt. FWIW. Anyone else experience this?
I'm also having this problem. Odin'd to EB01 then flashed 2.6 to 2.9.1. The phone is working great but the inability to receive pictures is annoying. Is it necessary to go to 2.8 before 2.9 or something of the sort?
.Ejekt said:
I'm also having this problem. Odin'd to EB01 then flashed 2.6 to 2.9.1. The phone is working great but the inability to receive pictures is annoying. Is it necessary to go to 2.8 before 2.9 or something of the sort?
Click to expand...
Click to collapse
It is said in the thread you have to install 2.9 before 2.9.1.
Now that I do not have a theme installed, there appears to be no problem receiving pix via mms. My post is inaccurate - I went from Odin EB01 to SC2.6 then to 2.8, then 2.9 then 2.91. Sorry for the error. But mms works on all the SC ROMs I tried, as long as I did not flash a theme on top.
Searched and didnt find this info any where. After you work the magic and get SC 2.9.2v and CW the ec10 kernal running what version/number info will you see when you go into "About Phone". I can't think of the exact names now but I'm talking about the ones at the bottom of the page.
kernal? baseband? Cant think of the rest.
MSHancock said:
Searched and didnt find this info any where. After you work the magic and get SC 2.9.2v and CW the ec10 kernal running what version/number info will you see when you go into "About Phone". I can't think of the exact names now but I'm talking about the ones at the bottom of the page.
kernal? baseband? Cant think of the rest.
Click to expand...
Click to collapse
Build Number should be EB01, because of Adrynalyne's ROM.
Kernel Should be 2.6.32.9
Baseband can be different. Might be DL09/EB01. People find DL09 better battery life.
Baseband refers to the modem/radio, and assuming you have the EB01 radio it will read EB01. The kernel will always show 2.6.32.9 for froyo, regardless of what kernel you flash. The build will also show EB01.
If you want to see what kernel you are using, you can download a terminal emulator from the market, type "su" to give superuser permissions, then type "cat /proc/version". Terminal will spit out some code, including a date. EC10 was compiled on March (EC) 10th (10)
I'm currently running EB01 with stoc EC10 with no problems. I want to either run EC10 undervolt or the new standard volt over clocKed. This issue is the only way i can flash them is with SGS Kernel flasher. CWM (Red) will not let me flash the new Kernels. After I install any new Kernel with SGS it runns fine and then freezes the device.
How do i relsolve?
I would suggest stepping back and figuring out why cwm isn't working. Do you have the new CWM that JT released(works with all kernels and voodoo)- linked here I think is the newest one http://forum.xda-developers.com/showthread.php?t=948722 ?
If not that may be your issue. If you do then that's odd because I have it and don't have the problem with flashing EC10 kernels.
Your not the first. I was fine on adrynlynns kernal then I went to JTs kernal and thats what happened. Went back to adrynlynns kernal and im fine again.
Stock EC10 = adryn's or jt's from source?
Also, do you have voodoo enabled? Are you flashing voodoo or nonvoodoo kernels?
BUt yeah, I think the first step would be to figure out why your CWM is messed up.
If all fails maybe follow one of the tutorials and Odin/Heimdall back to the basics. And go step by step from there.
From EB01 with SC 2.9.2 to EC10
I've checked around and can't seem to find why I'm not able to flash the EC10 kernel. As stated in the title, I'm currently running EB10 with Superclean 2.9.2.
When I boot into recovery, install from SD Card, and select the EC10 ROM from my SD Card (this one from JT - http://forum.xda-developers.com/showthread.php?t=1010102), it appears to install, says complete, but after rebooting I still show EB10.
Any help greatly appreciated!
You might actually be running the kernel
go into terminal (or download one from market)
type:
su
{Press enter}
cat /proc/version
{press Enter}
You will see:
Linux Version 2.6.32.9 (kernel author@virtualbox) (gcc version 4.4.1 (yada yada yada) COMPILE DATE
If that compile date is the date the the author released the kernel you are running it. If not....sorry but someone else is going to have to help because I'm sleepy and going to bed =)
bobloblaw1 said:
You might actually be running the kernel
Click to expand...
Click to collapse
You are correct Sir! Thanks for your help! I guess I'll ignore the reading then.
What's getting me lately is battery life. I've been through the fully drain, fully charge stuff and still seem to lose about 40-50% overnight while the phone sits idle for 7-8 hours. Yes, it's a little off topic, but it seems like 10 or 15% loss overnight would be normal, correct?
Question I'm wondering why when I flash over my Superclean 2.9.2 with PBJ Time Voodoo, when it's running it's perfect then after I restart or something I get a framework error next time I turn it on and a bunch of my other apps force close right away. I wiped the Dalvik Cache. So what could the culprit be?
I havent tried it, but im trying to figure out if that kernel is for that rom. IDT it is.
I'm using SC2.9.2 and the imnuts 0330 50uv voodoo kernel just fine. No problems at all.