Basebands for X10 Mini Pro (still looking for U20a firmwares) - Sony Ericsson XPERIA X10 Mini

Thanks to pbezza, I've finally extracted basebands for U20i.
Kernel and baseband are related to each other, so if you have baseband 006, you'll have 2.0.2.A.0.24 kernel, and with baseband 015 you'll get 2.1.1.A.0.6 kernel.
If you try to flash latest kernel to phone with baseband 006, you'll get infinite boot loops. This can be fixed by simply flashing correct bundle (kernel/baseband).
This will NOT wipe userdata!
All basebands are in Xperia folder on Mediafire.
U20i
Baseband 006 - kernel 2.0.2.A.0.24 - done
Baseband 015 - kernel 2.1.1.A.0.6 - done
U20a
Baseband 006 - kernel 2.0.2.A.0.24 - looking for firmware
Baseband 015 - kernel 2.1.1.A.0.6 - looking for firmware
Enjoy, and be careful, don't brick the phone, and if you do, don't blame me, you're doing this on your own risk!

Reserved for future use.

Hi Blagus,
I am unsure what you are trying to say.
My research indicates that hardware for U20i and U20a are the same but something in the software controls 2 different frequency options.
This stands to reason as having all options turned on would reduce battery life.
Now you seem to be saying you know how to switch the baseband option on a U20i to include options for U20a and vice versa.
Am I right or have I miss read you.
I am currently running U20a software but the baseband is still using U20i frequeny options. It was originally a U20i phone.

This is a good idea.

Hi Blagus,
I have looked at your other posts and it seems you can edit something in the Kernel to turn on all or some baseband options.
Yes I want to be able to do that 2.
i am running U20a Software but as the U20a baseband options have been turned off I cant get the service provider i preffer.
Looking at your Media Files it seems you edit a file in the Kernael Folder.
I can send you a copy of said Kernel Folder but I would think you edit a specific file. Can you tell me which one please so I can send it too u.
Thankyou.

Hello,
I need to update the kernel to the latest one in my X10mini pro, how can I do it?
Tried allready with SEUS but does not update.
Thank you

Purplerust said:
Hi Blagus,
I have looked at your other posts and it seems you can edit something in the Kernel to turn on all or some baseband options.
Yes I want to be able to do that 2.
i am running U20a Software but as the U20a baseband options have been turned off I cant get the service provider i preffer.
Looking at your Media Files it seems you edit a file in the Kernael Folder.
I can send you a copy of said Kernel Folder but I would think you edit a specific file. Can you tell me which one please so I can send it too u.
Thankyou.
Click to expand...
Click to collapse
If you have 7 files metioned in PM, can you give me the link?
BeToven said:
Hello,
I need to update the kernel to the latest one in my X10mini pro, how can I do it?
Tried allready with SEUS but does not update.
Thank you
Click to expand...
Click to collapse
It could be done if someone gives me links to U20i and U20a 2.1.1.A.0.6 FW.
Alternatively, change build.prop to CDA number which received latest 2.1.1.A.0.6 update and try again.

is there a different baseband version for 2.1.1.A.0.6?? i have 015...for 2.1.1.A.0.6

I've uploaded U20i basebands. Thanks to pbezza!

No problem blagus. If you want u20i firmware 2.1 v2.0.A.0.504 with baseband 006, get the UK firmware from here http://forum.xda-developers.com/showthread.php?t=826455
I currently have this one installed to confirm it's version for you.

Blagus, once a full firmware flash has occurred, is it possible to simply flash between basebands and the phone will still boot correctly? I'm asking this because I wish to test CM7 but it requires baseband 006 and I currently have 015. It's easy enough to do a full flash I suppose but to hop between basebands could be handy.

pbezza said:
Blagus, once a full firmware flash has occurred, is it possible to simply flash between basebands and the phone will still boot correctly? I'm asking this because I wish to test CM7 but it requires baseband 006 and I currently have 015. It's easy enough to do a full flash I suppose but to hop between basebands could be handy.
Click to expand...
Click to collapse
yes, it is possible, if it wasn't, this thread wouldn't exist...
Sent from my X8 using XDA App

You can find the one for U20a 2.0.2.A.0.24 here: http://forum.xda-developers.com/showthread.php?t=777660, right at the end of the first post is the link.

I've uploaded some more recent u20a firmware for those of you that want to play :
Check my post here : http://forum.xda-developers.com/showthread.php?t=777660&page=5
You will find links to download U20a factory firmware for :
Brasilian build 2.1.1.A.0.6 baseband 015
Australian Telstra build (latest apparently) 2.0.A.0.504 baseband 006
Have fun!

hey guys! im sorry for the delay! i got u20a 015 baseband bundle from one guy and i'll upload it in next two days.. thanks to him and hopefully i'll become recognized dev so i could clean this mess up by myself in my threads
best regards
Sent from my X8 using XDA App

blagus said:
hey guys! im sorry for the delay! i got u20a 015 baseband bundle from one guy and i'll upload it in next two days.. thanks to him and hopefully i'll become recognized dev so i could clean this mess up by myself in my threads
best regards
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Waiting for your upload couldn't thank you guys enough.

hi, how to update my baseband on my U20i???
I have the 006...
thanx
... and solved my problem, thanks all!

Just a quick question, the kernel/baseband combo on a decripted firmware folder is the kernel.*** file?

Hello here!
This is a silly question(I know), but I managed to flash the 015 baseband to my Mimmi, but my kernel still being 2.0.2.A.0.24. Did it have to change as well with the new baseband to 2.1.1.A.0.6? I got some reboots but I let it pass. Not happening anymore. I think they'll happen later again won't they?
Long story short I'm planning to flash this rom to my phone and I'm wondering if it would be harmful? Or the problem with basebands/kernels is the loop issue?
Thanks.

hi blagus thanks for this awesome thread. just a quick Q my phhone is currently on 2.0.A.0.504 with baseband 54404006. can i use the following(U20i_2.1.1.A.0.6_baseband_015.7z) baseband link and i will end up with this 2.1.1.A.0.6 baseband 53404015
just asking because reendor2005 said to me i have to flas the firmware and not the baseband is this included in the file

Related

Quick question: Firmware Version

Simple question. I see a lot of talk about firmware version 026. I guess this is the latest version. I have an ATT branded X10a that I flashed with the Global Generic 2.1 software. Do I have the latest 026 version? When I check the software info from the SE service menu the only number I see that looks like a SE firmware number is listed under S1 Boot Version: 1226-2253 R8A013.
What's the best way to check firmware version?
I want to make sure I have 026 because I want to install the Dark themes, and it says you can brick the phone if you are not on 026.
Thanks
settings - about phone - build number
Mine says 2.0.A.0.504
What does that mean?
TEKWRX said:
Mine says 2.0.A.0.504
What does that mean?
Click to expand...
Click to collapse
That's the firmware version.
TEKWRX said:
Mine says 2.0.A.0.504
What does that mean?
Click to expand...
Click to collapse
The latest (2.1) fw
R2BA026 is 1.6
Sent from my X10i using XDA App
So I have the latest or no? Sorry for being dense...
2.0.A.0.504 is the latest for 2.1
R2BA026 is the latest for 1.6
To answer your question, yes, you have the lateset firmware.

How to become the newest Baseband Version?

Hi there!
I flashe my phone with the Global x10i, I think it was http://forum.xda-developers.com/showthread.php?t=885956 now I use the http://forum.xda-developers.com/showthread.php?t=900441 firmware.
Have now:
Baseband 2.0.46
Kernel 2.6.29 [email protected] #1
Build FreeX10-beta3_zdzihu
I have seen some screenshots with Baseband.52 or .54 ???
How to become the latest?
My phone is an Austrian A1 Phone, X10i, I have only this two files from original the original firmware Update Software (one with 130 mb and one with 15-16mb)
regards
Just flash the latest amss.sin file
Go here for download
http://forum.xda-developers.com/showpost.php?p=11020435&postcount=8
Hi!
Thanks for your answer, but maybe you can explain it better "for dummys" ;-)
What File is this? How to flash it?
regards
lattensepp said:
Hi!
Thanks for your answer, but maybe you can explain it better "for dummys" ;-)
What File is this? How to flash it?
regards
Click to expand...
Click to collapse
So you're on a custom firmware and you don't know how to flash *.sin files?
Ah well, use flashtool 0.2.3 or the latest and make a ftf out of the amss.sin file.
Then flash it. If you don't know what you're doing then I would suggest you not to do it. You won't really gain anything with this software-vise.
Sorry to use this thread, but I have a noob question related to this... What does baseband MEANS for X10 / Android system?
I know what baseband means, but I fail to understand the difference between .412, .54 and so on...
I have baseband 2.0.52, kernel 2.6.29 [email protected] #1 on FreeX10 2.2.1 b3, and I don't know if I should update the baseband or not.
Thanks for help!
J0n3s said:
Sorry to use this thread, but I have a noob question related to this... What does baseband MEANS for X10 / Android system?
I know what baseband means, but I fail to understand the difference between .412, .54 and so on...
I have baseband 2.0.52, kernel 2.6.29 [email protected] #1 on FreeX10 2.2.1 b3, and I don't know if I should update the baseband or not.
Thanks for help!
Click to expand...
Click to collapse
No you have the latest possible if you wish to keep custom roms on your phone..

Basebands collection for X8

I've made bundles for FlashTool, for X8i and X8a, with basebands 006 and 015.
Kernel and baseband are related to each other, so if you have baseband 006, you'll have 2.0.2.A.0.24 kernel, and with baseband 015 you'll get 2.1.1.A.0.6 kernel.
If you try to flash latest kernel to phone with baseband 006, you'll get infinite boot loops. This can be fixed by simply flashing correct bundle (kernel/baseband).
This will NOT wipe userdata!
All basebands are in Xperia X8 folder on Mediafire.
Currently, these basebands are available:
X8i - E15i
Baseband 006 - kernel 2.0.2.A.0.24
Baseband 015 - kernel 2.1.1.A.0.6
X8a - E15a
Baseband 006 - kernel 2.0.2.A.0.24
Baseband 015 - kernel 2.1.1.A.0.6
Every baseband version is: M76XX-TSNCJOLYM-534040xy where xy is either 06 or 15, depending on which baseband you flash.
Update: jerpelea's CM7, racht's ports, as-mario's MIUI and ponanovn's MiniCM port are all made for latest kernel and baseband 015. Nice to see that, thanks
Enjoy, and be careful, don't brick the phone, and if you do, don't blame me, you're doing this on your own risk!
Possibly a method for restoring signal issue when SEUS fails
Reserved for future use.
E15a:
http://www.megaupload.com/?d=U4FWILXI
thanks!
blagus said:
I've took both 006 and 015 basebands and made bundles for FlashTool.
Both have 2.1.1.A.0.6 FW's kernel, while amss and fota files differ.
This will NOT wipe userdata!
It's for X8i version ONLY! If anyone has got 2.x flash files for X8a, give them to me and I'll make baseband bundle
X8i
Baseband 006 - X8i_2.1.1.A.0.6_Baseband_006.7z
Baseband 015 - X8i_2.1.1.A.0.6_Baseband_015.7z
Don't forget to update 7-Zip to latest version if you have problems with opening archive.
(Note: 7-Zip gives me best compression ratio - about 38% for these files - which is required due to my slow upload)
Enjoy, and be careful, don't brick the phone, and if you do, don't blame me, you're doing this on your own risk!
Click to expand...
Click to collapse
what is the advantage of this?? not meaning to be rude
The advantage is that you can change baseband as it please you. Why you'd want to I have no clue
Context: http://source.android.com/porting/telephony.html
All four basebands are now tested, packed and uploaded to Mediafire
good job !
hi i did yesterday flash the bundle for x8i
Baseband 015 - kernel 2.1.1.A.0.6
but the setting says that i have kernel
kernel 2.0.2.A.0.24
and baseband 015
but i dont have any looping like you said. did i do something wrong!
how i know that my phone is i or a! i have a E15i!!!!
now i installed the mini cm and its working? why, my kernel was not on the newest version.
maijinace said:
hi i did yesterday flash the bundle for x8i
Baseband 015 - kernel 2.1.1.A.0.6
but the setting says that i have kernel
kernel 2.0.2.A.0.24
and baseband 015
but i dont have any looping like you said. did i do something wrong!
how i know that my phone is i or a! i have a E15i!!!!
now i installed the mini cm and its working? why, my kernel was not on the newest version.
Click to expand...
Click to collapse
He said "If you try to flash latest kernel to phone with baseband 006"
not to flash latest baseband to phone with old kernel. this is your status, you flash the latest baseband to old kernel.
what blagus said about infinite bootloops is when you flash the latest kernel (2.1.1) to phone with baseband 006, your case is the opposite. understand?
I try to flash the whenever i flash it says driver error to reinstall driver in flashtool folder, PC Companion run ok and install gordon gate also show i got latest driver,
but still got driver need to reinstall, what is the problem expert
Does PC Companion get your device into flash mode? If so, then redownload flashtool. If not - get your X8 connected and go into hardware manager of your computer, find your connected phone and erase all the drivers, then reinstall PC Companion for new drivers.
done that, uninstall everything and driver,
start all over again but result still the same,
keep asking to install and reinstall driver from driver folder
Need explenation
deleted ....
are X8i and X8 e15i the same?
Traubisoda said:
are X8i and X8 e15i the same?
Click to expand...
Click to collapse
x8 surely is e15i
Traubisoda said:
are X8i and X8 e15i the same?
Click to expand...
Click to collapse
Yes. Difference is in the last letter: E15i and E15a, X8i X8a
Originally Posted by blagus
I've took both 006 and 015 basebands and made bundles for FlashTool.
Both have 2.1.1.A.0.6 FW's kernel, while amss and fota files differ.
This will NOT wipe userdata!
It's for X8i version ONLY! If anyone has got 2.x flash files for X8a, give them to me and I'll make baseband bundle
X8i
Baseband 006 - X8i_2.1.1.A.0.6_Baseband_006.7z
Baseband 015 - X8i_2.1.1.A.0.6_Baseband_015.7z
Don't forget to update 7-Zip to latest version if you have problems with opening archive.
(Note: 7-Zip gives me best compression ratio - about 38% for these files - which is required due to my slow upload)
Enjoy, and be careful, don't brick the phone, and if you do, don't blame me, you're doing this on your own risk!
Click to expand...
Click to collapse
My X8 firmware is 2.1 update 1 with baseband 06 build version 2.0.2.a.0.24
I have an infinte loop when using this file "Baseband 006 - X8i_2.1.1.A.0.6_Baseband_006.7z"
EDITED:
when i use "Baseband 015 - X8i_2.1.1.A.0.6_Baseband_015.7z", i have my baseband in 015, but the build number become 2.0.1.a.0.47.
if i want to upgrade to 2.1.1.a.0.6, what baseband should i use?
Hello guys, just one quick question, why is it that upgrading to baseband 15 from 06 the phone requests the sim network unlock code?
I am using the same SIM card, and the sim card belongs to the phone operator, so i don't understand why is it asking for network unlock code if it is the same sim.
I have found a couple of threads here on xda that recommend to click on the Dismiss button, but if i do that, i don't get any signal.
I have donwgraded again to 06, when i did the upgrade to 15 i also installed floyo 1.0 via xrecovery and everything loaded perfectly except that i have no signal, so it is useless.
I have tried going manually to the settings of mobile networks, but it says that it is not able to register on the network.
Thank you for any tips,
Regards
rdoggsv said:
Hello guys, just one quick question, why is it that upgrading to baseband 15 from 06 the phone requests the sim network unlock code?
I am using the same SIM card, and the sim card belongs to the phone operator, so i don't understand why is it asking for network unlock code if it is the same sim.
I have found a couple of threads here on xda that recommend to click on the Dismiss button, but if i do that, i don't get any signal.
I have donwgraded again to 06, when i did the upgrade to 15 i also installed floyo 1.0 via xrecovery and everything loaded perfectly except that i have no signal, so it is useless.
I have tried going manually to the settings of mobile networks, but it says that it is not able to register on the network.
Thank you for any tips,
Regards
Click to expand...
Click to collapse
Did you tried flashing your phone by SEUS to upgrade this directly from SE???
Thanks for replying biscoitu, the phone came with 1.6, so i changed the SI because mine was not ready for 2.1. The new software that was updated via PC Companion is:
2.0.1.A.0.47 with baseband 06, 2.1-update1
And it is working fine, but now the pc companion says that its up to date, and it is not updating to the latest baseband, so i downloaded the ones included in this thread and flashed with flashtool, when i reboot i get asked for the network unlock code, if i dismiss it does not work.
I don't understand why it asks for it, if it is the same sim card. I have visited a couple of websites that sell codes for the x8 but when i confirm with my IMEI they say that they don't have available.

help please

i rooted my phone before but then i reset it and now using stock firmware
model x10a
firmware 2.1-update1
baseband version 2.1.54
build number 2.1.A.0.435
and i have no idea why it keep on reboot while using recording video?? also when doing so many stuff at once >"<
anyone have any idea how to fix this please ?
thanks
Try flashing 2.1 over again with flashtool.
That will delete all data and rooting status.
Keep posting if you need help.
Have you used flashtool before?
yes... i tried every single things with my phone (2.2-2.3)
i used to flash a lot but then i decided with the original firmware is the best
but i also having problems with other version..
goku16 said:
yes... i tried every single things with my phone (2.2-2.3)
i used to flash a lot but then i decided with the original firmware is the best
but i also having problems with other version..
Click to expand...
Click to collapse
My guess to your problem is that you had the wrong baseband for the 2.2/2.3 ROM you were running. Rooting shouldn't cause a reboot in your phone.
but this is from stock version.... how could it be wrong @@

QUESTION for E10 nAa ics kernel

Hi guys, can i install this kernel https://code.google.com/p/minicm/do...0_nAa-ics-02_2.6.29.6-nAa-ics-02.ftf&can=2&q= by nAa to my x10 mini(e10i)??? im waiting for your reply, dont be a Guy who no mind, mind like Greedy who dont reply because they are rich and they dont care for others who need help like me and others....
_______________________________________________________________________________________________________________________
full details of my X10 mini(e10i)
Model number
e10i
Android Version
2.3.7
Baseband Version
M76XX-TSNCJOLYM-53404015
Kernel Version
2.6.29.6-nAa-14
[email protected]#1
MOD/ROM MiniCM7-2.2.1-robyn
Yes, you can. Just follow the instructions from the thread and it should be okay. http://forum.xda-developers.com/showthread.php?t=1630023
Renz29 said:
Hi guys, can i install this kernel https://code.google.com/p/minicm/do...0_nAa-ics-02_2.6.29.6-nAa-ics-02.ftf&can=2&q= by nAa to my x10 mini(e10i)??? im waiting for your reply, dont be a Guy who no mind, mind like Greedy who dont reply because they are rich and they dont care for others who need help like me and others....
_______________________________________________________________________________________________________________________
full details of my X10 mini(e10i)
Model number
e10i
Android Version
2.3.7
Baseband Version
M76XX-TSNCJOLYM-53404015
Kernel Version
2.6.29.6-nAa-14
[email protected]#1
MOD/ROM MiniCM7-2.2.1-robyn
Click to expand...
Click to collapse
As long as you install an ICS-rom that requires that kernel too, MiniCM7 won't run on it. And by the way, that kernel is on version 04 already, so don't flash 02, but 04.
Its working men, so I install the rom and kernel, Thanks
Sent from my E10i using xda app-developers app

Categories

Resources