rom 1.31.710.12
radio 1.58.21.23
spl 1.16
how can update rom and unlock the sim card to work another network
to unlock sim card must be "SPL-1.15.Hard"
but in my device "SPL-1.16.Hard"
how change it
Hello,
I've been trying to flash the hardspl-1.15mfg-**** using the steps on **** SSPL, USPL and HardSPL thread.
It all seem to work fine, but when i go check wich room i got, i still got the same as before...
Atm, i got:
NIKI100
SPL-1.16.Hard
CPLD-4
Anyone knows how can i fix this?
Thanks in advance.
Related
ipl 2.21.0001
spl 2.21.0lip
gsm 02.25.11
os 10.1.0.811
I am not sure what all that means, but i have successful unlocked many mdas. I bought a 8125 of craigslist that was supposively unlocked but when i have a t-mobile sim card inserted it asks for a lock code. I know the phone has mobile 6 cooked my mfrazz. I am not sure what the heck is going on with this phone but I have read and tried every unlocker i could find, even off of ebay and i am very frustrated now... please help me!!!! I cant live without my wizard!!!!!!!!!
duceirae said:
ipl 2.21.0001
spl 2.21.0lip
gsm 02.25.11
os 10.1.0.811
I am not sure what all that means, but i have successful unlocked many mdas. I bought a 8125 of craigslist that was supposively unlocked but when i have a t-mobile sim card inserted it asks for a lock code. I know the phone has mobile 6 cooked my mfrazz. I am not sure what the heck is going on with this phone but I have read and tried every unlocker i could find, even off of ebay and i am very frustrated now... please help me!!!! I cant live without my wizard!!!!!!!!!
Click to expand...
Click to collapse
ipl 2.21.0001
spl 2.21.0lip
gsm 02.25.11
os 10.1.0.811
Well,it seems from the look of it that,although it is 'HardSPL' and upgraded to wm6, but before doing 'HardSPL',the phone was not SIM unlocked,only HardSPL and upgraded to wm6.
Ok,try to generate SIM unlock code through lokiwiz03a,hope it'll work. Otherwise,you might have to remove 'HardSPL' revert to official rom and apply lokiwiz03a.Then HardSPL and upgrade to wm6.
Cheers!
I Have read allot of data, unbrick tutorials and upgrades suggestions...
but I Still haven't found what is the correct upgrade stages.
As far as I have read from the unbrick suggestions, I've reached to the following order:
1) Upgrading SPL (Enabling KITL)
2) Unlocking
3) Upgrading radio
4) Upgrading Windows
Can someone confirm or recommend/add other steps ?
During the upgrade steps, will the HERMES be usable ?
Unlock first THEN hard spl.
DONT mess with your radio if it works fine, as this is part that can COMPLETELY brick your phone(you may be able to use as a PDA but not gonna be a phone EVER again.)
Load an os(either a stock one OR one of the cooked roms our TOP chefs cook up.), most come as OS only, no radio.
Hope this helps.... Cheers
It is useless for me, I cannot unlock the phone, due to different locking technique.
there are few posts about a locked Jasjam, with no olutions.
all the unlocking process went well, 3 times...
after the unlock process, when I insert the sim, it connects to the network, (indicated with 5 lines) and after about 5 seconds, it disconnect and says :
"The system detected an invalid SIM card"
and asks for unlock code.
now I have the following versions:
IPL 1.01
SPL 1.40.Olipro
Radio 1.16
any ideas ?
The Solution
To unlock Cellcom (Israel) JASJAM, As weird as it sounds, you should disable/deactivate/uninstall/whatever the EYRON Multi language support, which comes pre-installed.
I'll let the experts explain it.
I Dont know if it works for Orange-il Tytn too.
please consider note this in unlock guide ?
Now, which version of HARD-SPL with KITL should I Install... (Link will be helpful)
Please note that I Only Unlock the SIM, and not SuperCID, the .BAT file of the unlocker says:
"CID Unlock: will make your phone SuperCID forever, don't check this if you are unsure. HardSPL will do same effect without loosing warranty."
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
ultramag69 said:
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
Click to expand...
Click to collapse
I have upgraded to Olipro V7
When I Boot into bootloader, I see:
IPL-1.04
SPL-2.10.Olipro
But I Still not get any sign of KITL according to this threat (Step 5).
The Device is booting normally, as if I'm not holding any bottons.
How can I check if KITL enabled ?
Do I need KITL while using OLIPRO V7 ?
Orenk,
Have you read the Mr Vanx guides or the wiki? Here are the links:
http://www.mrvanx.org/cms/
http://wiki.xda-developers.com/
WB
I'm very sorry if there is another topic around this subject, but i have very big problemes with my phone.
The phone is sim locked, and i think this may be one of the problems(but i could be mistaking).
I cannot flash hardspl, not even sspl, radio or a rom. I've tried even flashing from the sdcard, but of course no result.
When i use Ruu, all goes whell until the phone reboots, on the computer i get the update error 262, and on the phone it stucks at 0%.
Please help me i lost a half a day with this phone.
draghiciandrei said:
I'm very sorry if there is another topic around this subject, but i have very big problemes with my phone.
The phone is sim locked, and i think this may be one of the problems(but i could be mistaking).
I cannot flash hardspl, not even sspl, radio or a rom. I've tried even flashing from the sdcard, but of course no result.
When i use Ruu, all goes whell until the phone reboots, on the computer i get the update error 262, and on the phone it stucks at 0%.
Please help me i lost a half a day with this phone.
Click to expand...
Click to collapse
The Touch Dual comes in several varieties. A bit more information is needed.
Take the battery out the back and read the model number.
i ve managed a few minutes a go to flash hard spl, a new radio version, an a coocked 6.5 rom. but the phone it's still sim locked so i think that cidunlocking didn't work.
I have the 16 key version, Niki 100.
Thanks!
draghiciandrei said:
i ve managed a few minutes a go to flash hard spl, a new radio version, an a coocked 6.5 rom. but the phone it's still sim locked so i think that cidunlocking didn't work.
I have the 16 key version, Niki 100.
Thanks!
Click to expand...
Click to collapse
CID unlock it. You'll need to downgrade the SPL to Hard1.15 to do so. Re run SSPL, and then HardSPL 1.15 and follow the steps in the CID unlock thread.
draghiciandrei said:
i ve managed a few minutes a go to flash hard spl, a new radio version, an a coocked 6.5 rom. but the phone it's still sim locked so i think that cidunlocking didn't work.
I have the 16 key version, Niki 100.
Thanks!
Click to expand...
Click to collapse
I'd really like to know how you got pass the error [262]
I have a Nike with SPL 1.22.0000, recently upgraded wit hofficial ROM to WM6.1
Thanks
IPL 1.04
SPL 1.40OLI
NO GSM
NO O/S
someone who can help me
Has been seen, many times. Search "No GSM error"...
See my IPL AND SPL i dont find any solution for this can same one help me
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
eclipsept said:
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
Click to expand...
Click to collapse
have you SuperCID your phone as of yet? Sounds like it is not unlocked.
Try that, and let me know if that makes a difference.
Cheers
It sounds like the radio rom is corrupted... If you can try to flash the ORIGINAL SHIPPED STOCK ROM on to your hermes... It MIGHT fix the "No GSM" error...
If this doesn't work then you won't be able to use the Hermes as a phone again but you can load other OS's on and use as a PDA....
mikendawn, Super CID WON'T work to repair the radio rom. You seem to think its the be all and end all solution... Unfortunately this isn't the case...
Loading Hard SPL V7 on is as good as Super CIDing your Hermes as all it does is allow you to put other carrier/cooked roms onto your Hermes and allow you to use them.
No, not quite that, I thought his phone wasn't SuperCID. I didn't think it was the end all solution. Just thought it sounded like his phone was CID Locked.
Cheers
here can find a original rom for my phone
Hi,
I bought a branded at&t htc titan and I'm trying to install HSPL on it.
Unfortunately without any luck...
After doing the goldcard method, the installation of the europian rom (IMG_Eternity_HTC_Europe_1.09.401.02_Radio_16.23.02 .09_A_16.24.00.23_Signed_ETERNITY_RELEASE.nbh)
and finally the installation of the 2.05 SPL via goldcard,
In SPL it reads:
PI39100 MFG
SPL-2.5.160015.3(137079)
eMMC SND 15188MB
TOUCH A1(F:81, ID:1,V11,B:F8)
Radio-16.23.02.09_A
Everytime I startup the device, I have to input the unlock code that the seller provided me so that i can use sim cards other than at&t's...
From what I've seen, all at&t titans have to re-input the unlock code after restarting - even with a custom rom - ,
so we don't have to bother about this issue.
Also if I'm not mistaken, PI39100 MFG with SPL-2.5.160015 is what I should have before HSPL.
So, everything is ok till this point...
But, when I try to install HSPL, it connects, installs, says that HSPL installed successfully, device reboots, but still has PI39100 MFG with SPL-2.5.160015!
EDIT: From hat I've seen I'm stuck with a half-bricked titan, with official EU rom and spl 2.05 MFG.
Can't downgrade, either HSPL...
i managed to downgrade to official att rom, but the spl didn't downgrade...
I installed the rom 3 times with no luck with the spl...
Afterwards i renamed the eu rom from ETERNIMG to ETERDIAG and it installed.
but still the spl is PI39100 MFG SPL-2.5.160015.3(137079)...
I tried to install spl2.05 again, then spl2.6 with no luck, then hspl without results...
Finally I upgraded to 7.8 via cab installer and thats the best I managed to accomplish...
Anyone who can help with this bug and have succesfully HSPL att titan?
cotulla needs a titan stuck in 2.05 to fix it
elmanortega said:
cotulla needs a titan stuck in 2.05 to fix it
Click to expand...
Click to collapse
Sorry, I'd have no problem giving it to cotulla, but my Titan is all I have at the moment... (my HD2 died so I gave it to a friend, and I sold my Trophy...). i hope that someone can help...