I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
kenzes said:
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
Click to expand...
Click to collapse
Use baseband .49.
Thank you PlayGunsta! I will flash my baseband back to 2.0.49 and will report this back..... Maybe some of others had this problem also. This could help others
kenzes said:
Thank you PlayGunsta! I will flash my baseband back to 2.0.49 and will report this back..... Maybe some of others had this problem also. This could help others
Click to expand...
Click to collapse
If you did read the MIUI thread of Trip good, you would see he is recommending baseband .49.
Succes, and report progress buddy.
I have also had a lot of reboots with trips rom, but after a while when the cache is populated it settles down. To sum it up. Whenever I install a new application or use something I have not used before (market, mail client, etc) it will reboot after a little while (this is especially noticeable for apps that uses any form of communication). But after the first reboot/app I have not been noticing a lot of reboots.
bablefish69 said:
I have also had a lot of reboots with trips rom, but after a while when the cache is populated it settles down. To sum it up. Whenever I install a new application or use something I have not used before (market, mail client, etc) it will reboot after a little while (this is especially noticeable for apps that uses any form of communication). But after the first reboot/app I have not been noticing a lot of reboots.
Click to expand...
Click to collapse
What baseband r u on with this Trip ROM?
I'm on .49 but it still reboots very much.
Wiped everything, clean install baseband .49 still lots of reboots. Cant download any app from market. It reboots.
hey guyz, i tried using the flashtool to flash the 0.49 baseband but it never seems to work for me. first i flash the X10a_2.1update1_r2.1.A.0.435_Generic.ftf which comes with .54 baseband. then i used xrecovery to install miui 1.0.5. i know it says we need .49 or .52 baseband but i cant get to flash it. it flashes and at the end u get msg saying unplug device, turn on debug and i chek the baseband, it says unknown. please help me get baseband .49 on my x10.
kenzes said:
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
Click to expand...
Click to collapse
I'm also experiencing the same rebooting problem. Has anyone found a downlink link and flash instructions for bb 49?
PLEASE HELP ;o)
Related
I'm currently running FreeX10 B3H1, I see that B4 is out and all it apears to do is add support for the new Baseband... is there any notice improvements with the updated baseband?
I'm also not entirely sure what the baseband does
The baseband is the radio of the phone, so basically it controls your call quality, signal, mobile network, etc..
As fire why to upgrade, I can honestly say I haven't noticed any real benefits since I updated. However, as time progresses newer roms are going to be based on this version so if you want to keep flashing custom roms eventually you will have to upgrade anyway..
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
hey, for d "unknown baseband" problem u have to wait for d auto reboot after d 1st boot..only then d baseband and network will appear..
and for d boot loop problem-u will need to update to d .435 firmware (.52 baseband and .29 kernels)..or if u want to keep d old firmware install beta3..(beta 4 is only for .435 firmware)
happy flashing bro.
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
srikanth.naidu said:
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
Click to expand...
Click to collapse
I've installed this : http://forum.xda-developers.com/showthread.php?t=936462
Got .435 and baseband 2.1.54
Installed Free X10 without any problem.
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
ratmkicksass said:
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
Click to expand...
Click to collapse
no you don't...
flashing just the kernel and the baseband through flashtool has the EXACT same effect...
Hello guys,
I flashed my X10 to [ROM] [25-05] TripNMiUI "Iris" 1.1.0 Froyo, downloaded here in XDA. So, now my phone don't stop rebooting.
There says that custom kernels are not supported, so, I've tried to do it with cutom and stock kernels.
BB version in phone shows "unknown", can be it the problem??
My bb is .52, this rom works on .49 and .52, so it can't be a problem.
Could you help me?
Thanks.
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
darkvalance said:
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
Click to expand...
Click to collapse
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Try crashing it? Dev tools -> bad behaviour -> crash system server
Sent from my X10 TripNMiUI using XDA App
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Maybe you should try his older version of 1.0.9 instead
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
i have this issue aswell even i use crashed the server i still did not get any signal :S
I had the same issue with that rom. I had the use the sony software and restore it, root it, reflash it and import all my apps again. After that all was great.
On the plus side using the phone in standard mode just reminded how much trips roms has made the x10. Without trip and the gang in xda this phone would have been on ebay months ago!
Sent from my X10 TripNMiUI using Tapatalk
sbr.anderson said:
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
Click to expand...
Click to collapse
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
hbhtts said:
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
Click to expand...
Click to collapse
That worked for me and i was in baseband .52 too but i went back to my modded stock ROM because i was receiving a lot of FC with TripnMiUI and the phone was a little laggy too o.o...and i didn't like MiUI that much xDD
Thank you guys... tonight I'll try it again... I hope it works 100% :/
Same problem here.
So... I've tried again, TripNMiUI "Iris" 1.2.0 Froyo! and 3G data doesn't work. =/
Only wifi =[
And FruitNinja game was laggy =/
Hi
My X10i keep restarting 10 - 30 seconds after boot after installing custom roms. I've tried three roms already via xrecovery, the rom appears to install but the phone constantly loops ( restarts) after the given time above.
Any help or info regarding this would be appreciated.
wonnypompom said:
Hi
My X10i keep restarting 10 - 30 seconds after boot after installing custom roms. I've tried three roms already via xrecovery, the rom appears to install but the phone constantly loops ( restarts) after the given time above.
Any help or info regarding this would be appreciated.
Click to expand...
Click to collapse
Hi man i had this same issue.
Just leave the device to reboot a few times.
after the 10th time it should stabilize.
If it doesn't re-flash the rom.
What Baseband are you on?
Hi,
I have been having this same issue since i installed custom rom using xRecovery.
each time i restore my default SE backup, it doesn't restart and everything works well again. I have tried about 4 different roms. please help!!!
Baseband: 2.1.45
Firmware: 2.1 -update1
Build number: 2.1.A.0.435
I need help.
The vast majority of custom ROMs for X10 available here require a specific baseband. For instance, J's CM7 requires .52 baseband to run correctly.
Which custom ROM are you trying to run?
many roms need some reboot after install, its normal
Lol...just attach to seus to get the latest firmware/baseband and your troubles will disppear.
Yes, certain roms need a certain baseband...not sure i have seen any recent ones here that will work with 45 though...
Most need either 52, or 54+
Thats your problem
walleykool said:
Hi,
I have been having this same issue since i installed custom rom using xRecovery.
each time i restore my default SE backup, it doesn't restart and everything works well again. I have tried about 4 different roms. please help!!!
Baseband: 2.1.45
Firmware: 2.1 -update1
Build number: 2.1.A.0.435
I need help.
Click to expand...
Click to collapse
So helpful
Many thanks.
Sent from my X10i using XDA App
Ok.. Now here is what happened...
I have been using the Mike OS 6.5.7 (V 2.3.4) for a while, was pretty happy with the stuff! Later, just to try a different ROM, i installed the openOptimus build 2.201.1. After installing, i found out that there was some issue with the so called baseband; Basically, the baseband had to be changed to V20.
With a bit of a help from the openOptimus build 2.201.1 thread, i did a baseband change! It did start working but with a few nitches. So i went back to Mike OS, and there it was! A BASEBAND MISMATCH.
So to rectify this issue, i went to this forum ([HOWTO] Flashing baseband (radio) via LGMDP.exe - xda-developers) and downloaded the V10 baseband, and followed the steps. But my phone never recognized the port! And so im stuck with open optimus now.
Im sure i missed something in between the installs. Can anybody tell me what exactly would have happened here and how this could be rectified?
(Cant wait for the new ROM from Andy.... Dont wanna mess my phone up before trying that )
Cheers
varungnath said:
Ok.. Now here is what happened...
I have been using the Mike OS 6.5.7 (V 2.3.4) for a while, was pretty happy with the stuff! Later, just to try a different ROM, i installed the openOptimus build 2.201.1. After installing, i found out that there was some issue with the so called baseband; Basically, the baseband had to be changed to V20.
With a bit of a help from the openOptimus build 2.201.1 thread, i did a baseband change! It did start working but with a few nitches. So i went back to Mike OS, and there it was! A BASEBAND MISMATCH.
So to rectify this issue, i went to this forum ([HOWTO] Flashing baseband (radio) via LGMDP.exe - xda-developers) and downloaded the V10 baseband, and followed the steps. But my phone never recognized the port! And so im stuck with open optimus now.
Im sure i missed something in between the installs. Can anybody tell me what exactly would have happened here and how this could be rectified?
(Cant wait for the new ROM from Andy.... Dont wanna mess my phone up before trying that )
Cheers
Click to expand...
Click to collapse
Maybe u need to reinstall the drivers...
Sent from LGE Secret phone using tapatalk app...
ok... would give that a try
varungnath said:
Ok.. Now here is what happened...
I have been using the Mike OS 6.5.7 (V 2.3.4) for a while, was pretty happy with the stuff! Later, just to try a different ROM, i installed the openOptimus build 2.201.1. After installing, i found out that there was some issue with the so called baseband; Basically, the baseband had to be changed to V20.
With a bit of a help from the openOptimus build 2.201.1 thread, i did a baseband change! It did start working but with a few nitches. So i went back to Mike OS, and there it was! A BASEBAND MISMATCH.
So to rectify this issue, i went to this forum ([HOWTO] Flashing baseband (radio) via LGMDP.exe - xda-developers) and downloaded the V10 baseband, and followed the steps. But my phone never recognized the port! And so im stuck with open optimus now.
Im sure i missed something in between the installs. Can anybody tell me what exactly would have happened here and how this could be rectified?
(Cant wait for the new ROM from Andy.... Dont wanna mess my phone up before trying that )
Cheers
Click to expand...
Click to collapse
Did you flash the gsm fix along with mik_os's CM7 ?
I too have new baseband and am using the above rom with the fix....
hell1134 said:
Did you flash the gsm fix along with mik_os's CM7 ?
I too have new baseband and am using the above rom with the fix....
Click to expand...
Click to collapse
Din do that ... Think that should solve the issue... CHeers mate!
varungnath said:
Din do that ... Think that should solve the issue... CHeers mate!
Click to expand...
Click to collapse
Enjoy your GSM only smartphone.
For the zillionth time - mik's ROMs are old baseband ONLY! With the patch, data does NOT work.
People, search and at least read the darned ROM instructions, this pointless noise here is annoying like hell.
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock, Xperia X10 always crashes and reboots when using GoogleMaps with 3G, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
cunhetkhe said:
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock whenever it uses GoogleMaps with 3G were Reboot, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
Click to expand...
Click to collapse
Hi, welcome to XDA developers!
I'll try and help as much as possible...
Which kernel are you on? Stock or some custom kernel?
Thank you, I use Stock Rom, I thing it's Stock kernel. I tried to test many of the original Rom but the situation has not improved.
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
cunhetkhe said:
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
Click to expand...
Click to collapse
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
9Lukas5 said:
- Baseband 2.1.67
- smsBB67 patch
- Kernel upgrade
flashing procedure:
-The baseband and the kernel upgrade must be placed in the firmwares folder from flashtool and the sms patch on to the sdcard.
-After you have flashed the rom and the xrecovery now also flash the sms patch before remove the battery.
-In Flashtool flash first the 2.1.67 Baseband, after flashing finished, remove usb cable and select the kernel upgrade and connect the usb again when flashtool asks.
-After both (bb and kernel upgrade) flashed, you can remove the usb-cable and power on the device with everything working on bb 2.1.67.
Regards,
L[/COLOR]
Click to expand...
Click to collapse
I haven't tried this yet, if it doesn't work let me know.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
Many thanks to you, I will try to follow your instructions and will report results
"smsBB67 patch" installed by Xrecovery ?
cunhetkhe said:
"smsBB67 patch" installed by Xrecovery ?
Click to expand...
Click to collapse
Yep now flash bb67 via flashtool.
After that you will need to flash Kernel UpGrade.
If you need help with flashtool you can ref here:
http://forum.xda-developers.com/showthread.php?t=928343
Sent from my X10i using Tapatalk
I have followed your instructions and now my phone has Baseband67 but it still reboot when I use Gmaps with 3G.
You have no other way to fix this problem? please help me
Hi bro, sorry I'm afraid i got no other method to work... you'll might have to use 2.1 firmware ...
Sorry, can't help you
Anyway, enjoy your stay at xda and hope you find a workaround soon.
Anyway thank you also, hope to have another bro in the forum will find a way to fix this condition.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
My phone is X10a, I've flash the rom 2.3 of X10a and then I flash baseband .67 as your guide and was successful, I have cured this disease. My X10 was running fine. Thank you again. (earlier I just flash the Rom 2.3 of X10i )