Related
Ok... now this is going to be a work in progress and an answer to most questions...
To all pof, Des and Sleuth have done a great job in getting the tools together so we can flash our devices...
1. To all who want to SuperCID your device no matter what ROM version you have and no matter what Radio BootLoader version you have you can use POF's version 3 unlocker found here http://pof.eslack.org/hermes-unlocker/
2. Once you have SuperCID your device you can now load extracted ExtRom, OS, and radio roms (radio can only be done if you have radio bootloader 107 or less) to do this goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
3. For all of those not interested in ROM cooking and flashing cooked ExtROM's all you need to use is des's SSPL tool... just copy it onto your device and run it... the SPL version should say SPL-1.09.des. The tool can be found here http://forum.xda-developers.com/showthread.php?t=293651
4. Just to clarify... once you have flashed radio bootloader 108 onto your device it is possible to do Extracted Radio only upgrades please read edit 3 below..... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
5. if your device is unusable please refer to here http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
appologies for all the links but thats what the wiki is for guys... lots of reading but it is all worth while in the end...
and if ive missed anything feel free to add...
edit 1... The reason you SuperCID your device is to enable flashing of any SPL Bootloader versions, extracted OS roms, extracted ExtROM's and to an extent Radio ROM's (only if your device has RadioBootloader 107 or less).... but SuperCIDing your device voids the warranty... if your just looking to upgrade your device to a newer ROM and are worried about the warranty just use des's SSPL tool... read point 3 above...
edit 2... the SSPL tool... you need to copy this onto your device while windows mobile is running... if your device is not in a usable state refer to point 5... once its finished copying click on the exe and run it... it will put your device into a 'Service' mode and with bootloader versions IPL-SSPL by Des and SPL-1.09.ds... all you need to do now is choose which shipped original rom you want to use to flash your device with... see here for options http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Dead Tytn
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
jash431 said:
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
Click to expand...
Click to collapse
you need to boot it into Windows Mobile... can you do this?
walshieau said:
you need to boot it into Windows Mobile... can you do this?
Click to expand...
Click to collapse
I thought step 5 covered this.
wpbear said:
I thought step 5 covered this.
Click to expand...
Click to collapse
but he didnt read step 5... i hadnt added that bit yet
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Please Answer if you are sure
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ME TOO...
IF have one NEW VERSION with "SSPL",use Micro sd /RUU ,maybe can help me and you to reflash it ...
walshieau
BIG THANKZzz for this information...
simple said:
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Click to expand...
Click to collapse
1. If you have radio bootloader 108 you cannot downgrade it...
2. Yes its true but that still wont downgrade your radio bootloader.. it will just downgrade your radio, os and extended rom
3. yes that is correct
4. current limitations read this... http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ok now you have to open an mtty session... download this ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
1. Disable 'Allow USB Connections' in Activesync
2. Open mtty.exe
3. type \\.\WCEUSBSH001 in the port section and click ok
4. press 'Enter' twice and type task 32 and press enter
4. type info 2 and tell me what is displayed...
What about writing an app which fully identifies all Hermes specs? It should open a message box and answer whether device is SuperCID, which IPL, SPL, RBL, ROM, Radio and if readable which ExtROM. Wouldn't that be nice? Every noob could give all the information viable for all others to help.
well if the user was to go and look at the device information application in 'Settings' > System then can find out what radio rom version they have when in turn if they look at the table in the wiki they can tell what version of Radio Bootloader they have... but i will investigate writing a little app... shouldnt be too hard...
walshieau said:
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Click to expand...
Click to collapse
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
wpbear said:
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
Click to expand...
Click to collapse
1. i havent tried that... what is the point??
2. yes that is correct...
dead tytn jash431
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
jash431 said:
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
Click to expand...
Click to collapse
check your pm
Hi Walshieau,
After I follow your edit 3 step, when I try to upgrade the radio,
it shown Error 262. What's that error message for?
Thanks
did you copy SSPL to your device and run it before you started the upgrade???
Am I right in thinking I could mix and match all the components with this tool?
I.E. extract the o.s. from one full update then extract the radio from another, then use "NBF generator" to merge them and flash them all at once?
Hi @ all...
so time has come i will return my phone to tmobile, because of the heavy problems with the slide-out-keyboard. i tried to solve my keyboard-problems with the orignal shipped rom, but i realised that it doesn't matter which rom i flash to my phone, the problem seems to be of hardware-ish nature...
so now my problem is: i want to fall back to the original state...
i want original IPL,SPL,OS,Radio, Boot, etc etc...
i tried to flash the "Original Shipped TMOB101" from the wiki, it flashed nice with CustomRUU...the original flash utility couldn't find my phone.
so i unpacked the exe and flashed the nbh with CustomRUU... flashed nicely, but didn't boot... first problem: whitescreen, second: hang on windows mobile screen, third: NOGSM... tried to flash newer GSM 1.43. this worked nice then, but isn't original... any idea how to get the 1.05.02 radio running? tried to reflash the complete tmobile nbh again, same result.
tried to flash with Vista, and also with XP, nothing changed...
next problem i assume is: how to downgrade SPL? and how to detect Bootversion? could it be, that i flashed some newer boot in between, because, i have always flashed newest radio roms, could it be that i flashed a boot together with a certain radio?
hope someone can help me... my device is also simunlocked, i hope they do not recognize it at tmobile. but i want to get everything else into original state before returning.
greetings
garfield
There is now an official wm6 update which you can use
it's available here:
http://forum.xda-developers.com/showthread.php?t=337163
If you're wondering if it's properly been released, it's also available on the t-mobile business site.
Shaks
shaks1979,
I have just been to the tmobile business site and I cannot find the WM6 update - please can you post a link to it?
many thanks,
Paul
the german t-mobile site dies not offer to download the upgrade yet.
flashed the new WM6 from t-mobile yesterday, and it works really great, but my keyboard isn't functional anyway...
has anyone an idea how to enable the flash-utility to overwrite the SPl and IPL? because my tri-color-screen reads IPL-1.01 and SPL-2.10-Olipro and this means, both of them have not been updated... any way to overwrite these rom-sections with the now tmobile ones?
so when finished upgrading (IPL and SPL have to be upgraded before i can go on) i will return my phone to a tcom store, they have to bother with my keyboard issue... my phone isn't a half year old by now... keyboard issues like this shouldn't be there i assume
greetings
and thanks for the new wm6 links.
garfield
Extract the nbh file from the T-Mobile ROM and flash it with CustomRUU. This will overwrite IPL / SPL
[...see reason]
which settings do i have to use with CustomRUU? do i have to select same radio-buttons as always? (SPL 2.10-Olipro/Is it HardSPL) ?
okay, so i found the option via try and error i had to use use: Force UNSAFE SSPL.
i have another question now:
as far as i know, t-mobile DE has not released this ROM to its customers via their website, so i have to flash my phone back to WM5 original rom, and bootloaders, because this new tmobile rom didn't make my problems with the keyboard go away.
my local store told me that they will send the device back to tmobile, and tmobile then will repair or exchange the device.
so if they send it back to tmobile, i uess i have to put it into original state, haven't i? cause flashing the rom causes loss of warranty, doesn't it? i hope they will not recognize, that i sim-unlocked it (did not touch the CID).
problem occurring: i extracted the nbh from the original shipped-archive and flashed it with CustomRUU but when booting NO GSM shows up, and windows stops booting during first bootsplash... sometime during second bootsplash... any idea? might it be that it was like this, because of olipros 2.10 SPL?
greetings
garfield
I wonder why you SIM unlocked your device?
The German Hermes never was SIM locked, so, there was no need to unlock it!
You will either have to Soft-CID-unlock or Hard-CID-unlock your device if you want to flash it otherwise it won't work!
What settings are you talking about? You simply copy the nbh file to the CustomRUU folder and run the UPDATE UTILITY in there! There are no settings, it works the same way as the utilities from shipped ROMs - simply follow the instructions on screen and do not plug out nor touch the device until the job is done!
So actually it is not a hermes, it is a MDA Vario 2 from tmobile, isn't it?
partly you're right, the device wasn't sim-locked, but net-locked, wich means i cannot use my second sim card from vodafone with it. so i had to unlock it.
(i tried without unlocking, the phone asked me for a certain code and no, it was not the pin-code from the vodafone-sim )
if you launch CustomRUU you are asked for the version of your SPL, at least this is what happens when i start it. if you cannot imagine what i am talking about, i will make a screenshot, for better understandings.
I had Hard-SPL installed, this is a form of SOFT-CID-unlocking?
with having Hard-SPL installed i could not boot the original shipped german TMOB101-rom from the wiki...
can i flash the old ipl/spl/radio/os without worries?
greetings
garfield
Within the CustomRUU folder you should see a file called ROMUpgradeUt.exe - this never ever asks for SPL, it is nothing but a modified FLASHING UTILITY.
i only have ruuwrapper.exe
i used this customruu v5.2 from olipro's thread
what customruu are you talking about? actually i never saw a file named ROMUpgradeUt.exe
where to find?
thanks for your help.
greetings
garfield
EDIT:
i have just found this:
NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error. As with other downgrade guides this is NOT intended as a guide for claiming the warranty of the device having flashed components which are not authorised by the manufacturer or carrier.
Click to expand...
Click to collapse
on the WM5-Downgrade site over @mrvanx.org
The flashing can now begin (without fear of not being able to return it to stock form)! And for those who need a way to return to stock form, HTC has come through!
http://www.htc.com/us/support/pure-att/downloads/
HTC PURE (AT&T) Original Ship ROM | 02.05.2010
This software is the actual ROM that the HTC PURE (AT&T) shipped with. less
In the event that the device has a fatal error and cannot be recovered by Soft Resetting or Hard Resetting the device, it may be recovered by reloading the original ROM. Please note that during this recovery process, the device will be Hard Reset and anything that is NOT part of the Operating System (contacts, calendar, music, etc) will be permanently deleted; always make a point of backing up your devices data on a regular basis!
Instructions:
1. Download and save the HTC PURE (AT&T) Original Ship ROM to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (tri-colored).
5. Once it bootloader mode, wait for "serial" which shows at the bottom of the screen to change to "USB".
6. Once USB shows on the device, on your PC double click on the HTC PURE (AT&T) Original Ship ROM to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
http://member.america.htc.com/download/RomCode/HTC Pure/HTCPUREATTOriginalShipROM.exe
A BIG THANK YOU to HTC!
will it change spl
for flashing we use hard spl 1.83olineix
will it change back to stock spl after the flash
Good eye dynamius; I've been hoping that this would show up at some point.
Is this with 2.1 manila?
manila 2.1
chikoo said:
Is this with 2.1 manila?
Click to expand...
Click to collapse
Unfortunately this is with manilla 2.1.
Does this mean we should expect to see a new official ROM in the near future though?
mizzikedamosher said:
Does this mean we should expect to see a new official ROM in the near future though?
Click to expand...
Click to collapse
There is already a new leaked rom but needed to a new hspl to flash it.
Cant Download
Hi
I can't download this rom.
I click in the link and it redirect me to another page, and I keep looping.
Now I'm in Costa Rica and maybe I need to be in USA to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
Thanks
blancofran said:
hi
i can't download this rom.
I click in the link and it redirect me to another page, and i keep looping.
Now i'm in costa rica and maybe i need to be in usa to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
thanks
Click to expand...
Click to collapse
MEGAUPLOAD: http://www.megaupload.com/?d=E01IBRNN
opensea said:
There is already a new leaked rom but needed to a new hspl to flash it.
Click to expand...
Click to collapse
Where is this official leaked ROM you speak of for the pure?
Only ROMs I see out is 3rd party cooked ROMs. Not anywhere close to the quality of official ROMs. And only ROMs that I've seen out that makes a huge difference in anything is the ones with Manila 2.5. Which are horrible in the sense that MMS doesn't work on them, because there is no way of opening it unless you do a registry hack and add a cab for it to open in windows messaging client.
finally! i've been looking forward to this
Thanks
Hey. Thank you very much
Hi
Hello How can I change the band to the following:
Network Type : GSM
Band Frequency: GSM (900+1800+UMTS(2100+900)
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
PURE dialer canvas
Great find! Any chance that someone could / has extract(ed) the phone canvas out of this rom to see if it addresses the delay issues associated with the topaz and leo roms?
great find buddy
naplesbill said:
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
Click to expand...
Click to collapse
that was a awesome work buddy ..
perhaps someone can re package the relocker with spl found from the download
Sucess
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
So that confirms you have to relock the spl before it will replace the hardspl with the original spl. That is good to know.
relocker replaces the spl to stock spl version 1.33
flashing again flashes the spl to 1.83
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
which rom ? ive downloaded the exe and notcied there were 2 nbh files, just wasnt sure
Hi, i need to remove HSPL and wonder if anybody have a stock...i mean stock rom for Sweden (SE). All i found is broken links. From HTC Sweden 1.48 and 1.66 can be downloaded. But we started out on 1.43 and i guess thats what i need to get rid of HSPL.
HTC Support site?
Try downloading one of these from HTC Support. (You will need your serial)
Then start the upgrade utility, follow instructions until you need to awknoledge you have read the warning in red.
Now in your temp folder there will be a folder containing the ROM (RUU_signed.nbh). (in my case the folder is named pft100.tmp)
Copy the ROM to a safe place
Close upgrade utility.
Now follow instructions as in Flash guide:
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
This method removes HSPL!!
slightly simpler ways to get the ruu_signed file
right click the rom.exe choose extract here
or
right click the rom.exe and choose open with (winrar, winzip ro whatever)
or
right click the rom.exe choose rename and change the extension from .exe to .zip then double click the file to open it with winrar/winzip whatever you have installed.
however you dont really need to extract the .nbh file anymore, you can run hspl2 and choose 1.66.0000 (or 1.42.0000) and then when it has done hspl is now gone, and you can flash the rom over usb by running the .exe.
Also, , Leo Official Roms thread, first post first link, , the 1.48 and 1.66 folders both contain SVE stock roms.
Thnx for your quick and detaild responses.
Why i asked for a official 1.43 or old Swedish rom was because i have done the steps above (Exept using HSPL2) and when i boot (with volym down) nothing happens, text is saying serial on boot screen.
Now, im using the first HSPL (perhaps the first ever to come out) version since my phones is old now (almost a year =). Could maybe this fix it, and isnt HSPL2 for us modells of HD2?
Nakazul said:
Thnx for your quick and detaild responses.
Why i asked for a official 1.43 or old Swedish rom was because i have done the steps above (Exept using HSPL2) and when i boot (with volym down) nothing happens, text is saying serial on boot screen.
Now, im using the first HSPL (perhaps the first ever to come out) version since my phones is old now (almost a year =). Could maybe this fix it, and isnt HSPL2 for us modells of HD2?
Click to expand...
Click to collapse
nope, hspl2 is for regular hd2, , the first one that you have only supported 1.42.0000, hspl2 supports all spl versions. HSPl3 is for US tmous hd2 (and telstra).
Downloaded HSPL2. Installed Swedish stock rom 1.66 and used HSPL2.... it worked, incredble. Thnx for the help all.
Im sorry for opening a new topic. But i really dint find specific topic.
I have european 512 HD2 with HSPL, MAGLDR 1.12 and Android NAND
I need to return it to STOCK vodaphone (english) Windows 6.5. Here is what i know.
Flashing STOCK will erase HSPL.
But what is procedure. Should i only download the package and follow instructions like with normal procedure. I flashed 100 custom ROMS via usb and with HSPL. But i dont want to f-uck this up.
Another question is Which ROM to use?? I found this link.
http://www.shipped-roms.com/shipped/Leo/
but there are too many vodaphone ROMS. I dont understand what is differences between normal radio, signed radio, crc radio. And there are different versions of radios, i heard that you can brick it if you flash wrong radio.
Just a little instruction would be great.
vodafone lastest ship rom
how about here ,that is the lastest rom from vodafone uk
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
souvath
THX. How about the procedure. Can you help me with that.
denyboy said:
THX. How about the procedure. Can you help me with that.
Click to expand...
Click to collapse
I want to return to SPL for warranty couses
Go to the link above and download the Vodafone ROM Update (dated: 2010-05-04).
Option 1
With WinRAR extract the files.
Rename the extracted file 'RUU_signed.nbh' to 'leoimg.nbh'.
Copy it to the root of the microSD Card (a 1GB, 2GB or 4GB are best).
With the phone switched off, press and hold the Volume Down button and then tap the Power button. The phone will boot up and then flash the phone with a 1.72 Vodafone ROM and the SPL will be 1.66.0000
Option 2
Run the downloaded file and follow the instructions. Now you will have a 1.72 Vodafone ROM and the SPL will be x.xx.HSPL
Download and run HSPL2. Select 1.66.0000 and that is it.
Just one question. Does it specificly have to be Vodafone ROM Update (dated: 2010-05-04) and why??
Why cant i flash recent one
denyboy said:
Just one question. Does it specificly have to be Vodafone ROM Update (dated: 2010-05-04) and why??
Why cant i flash recent one
Click to expand...
Click to collapse
It is just that you are returning it for warranty, so I was giving you the easiest options.
Okay then:
Option 3
Put your phone into Bootloader Mode, then connect to your PC.
Download and run HSPL2. Select 1.66.0000. Now your SPL will be 1.66.0000. If you don't do this step then the 3.14 ROM will have a very low amount of RAM, because the 3.14ROM conflicts with HSPL. Then HTC should suspect that you have been using HSPL, thus invalidating your warranty.
Download the 3.14 Vodafone UK ROM.
Put your phone into Bootloader Mode, then connect to your PC. then run the ROM. Now you will have the 3.14 ROM, 2.15.50.14 RADIO and SPL of 3.03.0000