[Q] How to flash a ROM steps for TB - Thunderbolt Q&A, Help & Troubleshooting

I am new to rooting and I wanted to flash another ROM other than the stock one after rooting. I followed the steps given to root my TB and that was cake. Thanks for the simplicity. I am now looking to add the Virus ROM but not 100% confident in how to do this. There are several steps given for other devices but I have yet to see one for the TB. If someone could point me in the right direction or link me to the actual steps that would be appreciated.

Install Clockwork Recovery
Boot into CWR
Select "wipe data/factory reset"
Select "yes -- delete all data"
Go back using the softkey
Select "install zip from sdcard"
Select "choose zip from sdcard"
Find and select your desired ROM
Reboot

Download the rom you want which will be store on your phones SD Card in Downloads then make a Backup of the rom you have now . Go into Rom Manager and select backup current Rom , you'll get a pop up were you can name the rom whatever you want , let it do it's thing , it will backup then restart the phone. When the phone restarts go into rom manager again and select Install Rom From SD Card , it will take you to your SD Card where you'll go into Download where the rom is stored , select the rom you downloaded you'll get a pop up which will ask if you want to wipe , check wipe and then ok . Let it do it's thing again when it down it will restart and ask you to set up you accounts just follow the steps . When everything is set up go in to the market and select My Apps you should see all your application downloading give them some time to download. Then it's all up to you to set up your home screens .

Don't forget to wipe the cache partition , and also select advanced and wipe dalvik cache. I would do all the steps listed above and these 2x, just to be on the safe side.

Where can I find those options?
Sent from my rooted Thunderbolt with VirusROM AirborneTB. Xda premium

wish i would have found this like 4months ago...when i rooted my first phone.

jakejonez said:
Install Clockwork Recovery
Boot into CWR
Select "wipe data/factory reset"
Select "yes -- delete all data"
Go back using the softkey
Select "install zip from sdcard"
Select "choose zip from sdcard"
Find and select your desired ROM
Reboot
Click to expand...
Click to collapse
I'm new to Android but have some experience with rooting on other types of devices. I'm looking at flashing this ROM with ROM Manager and the process above: http://forum.xda-developers.com/showthread.php?t=1041514
I think I understand what's happening on the phone when I do this but wanted to make sure. Other than the usual disclaimers about risk of bricking, is there anything else I need to know?

just in case you didn't know how you hold volume down and the power button to get to hboot and then pick recovery from there. otherwise if you just want easy download rom manager from the market

sunflash72 said:
just in case you didn't know how you hold volume down and the power button to get to hboot and then pick recovery from there. otherwise if you just want easy download rom manager from the market
Click to expand...
Click to collapse
Thanks!
+1

thanks works good

jmiller98 said:
Don't forget to wipe the cache partition , and also select advanced and wipe dalvik cache. I would do all the steps listed above and these 2x, just to be on the safe side.
Click to expand...
Click to collapse
Where can I find these options, and in what part of the flashing process should I do them?

Just a quick question, its really not necessary to wipe data and cache very time is it?

Related

Flash rims?

What does it mean to flash a rom? Like install it?
Sent from my FroyoEris using XDA App
Yes, it means to install it. The process is similar to formatting your computer's hard drive & installing a new operating system.
You've got to be rooted & have a recovery image installed (hopefully you installed one as part of your rooting) search the forums for more on that if you aren't sure.
Short-version how-to:
1. Back up your data, apps, & even your SD card just to be safe. It shouldn't be a problem if you do things right, but still...
2. copy the ROM of choice into the root area of your sd card (not in a sub-folder)
3. turn off phone. Boot phone into "recovery" by holding the Up-vol button when you turn on the phone - keep holding the up-volume until the menu pops up. (if no menu comes up, you didn't install a recovery image - search for "amon-ra" in the forums)
4. Go to "backup & restore" and make a "nand backup" which will backup your current ROM, settings, etc.
5. Wipe system. Wipe Dalvik. Don't skip this step.
6. choose "flash zip from SD card", scroll down to the ROM you downloaded & let 'er rip!
7. Reboot when it finishes flashing & find something to do for the 10 minutes it may take for your phone to reboot.
8. Set it up & enjoy!
Sweet man. Yeha I guess when I rooted it it put the recovery image on there. I've been using rom manager to back an change roms.
Sent from my Vanilla Tazz using XDA App

[Q] N00b move from BIONIX to Trigger

Hi,
I'm noob that got Vibrant phone (from EBAY) that already ROOTED & ClockWorldMod Recovery V2.5.1.3 - Voodoo Lagfix (I don't how...)
With :
KERNEL : 2.6.32.9
BASEBAND : T959UVKB1
BUILD : BIONIX-V 1.3.1
SUPERUSER V2.3.6
SU BINARY V2.3.1-EF
VOODOO LAGFIX
In recovery I see :
ClockWorldMod Recovery V2.5.1.3 - Voodoo Lagfix (ALL IN RED)
apply sdcard update.zip
wipe data \ factory reset
wipe cache partition
install zip from sdcard
backup and restore
mounts and storage
advanced
voodoo
+++++Go Back+++++
I don't have any backups so I want to install ROM MANAGER from market, I read HERE that if i want to upgrade I need to go go back to stock (I'm really don't know how this version get to the phone and somehow the ROM MANAGER not there...)
Do I must go back to stock or I can download ROM MANAGER, Install it and make something like "Upgrade" - I don't know what is the voodoo lagfix and do I need to uninstall it if I want to:
1. install ROM MANAGER and preform Backup & Restore (most important how to verify my backup OK )
2. Move to Trigger 3.2
Can some guide me with simple steps about how to start (I know that I'm not starting for 0 ether in the phone and ether in my knowledge)
Thanks.
Download Trigger
Install titanium backup, backup all of your apps
Move to internal, /sdcard
Reboot to red recovery
Make a backup
Wipe
Flash, instal from sd
Reboot
Wait
Reboot
Restore
Reboot
this says it all
s15274n said:
Download Trigger
Install titanium backup, backup all of your apps
Move to internal, /sdcard
Reboot to red recovery
Make a backup
Wipe
Flash, instal from sd
Reboot
Wait
Reboot
Restore
Reboot
Click to expand...
Click to collapse
This says it all, but since you are a noob
by wipe, he means to wipe everything (data(factory reset), cache, delvik cache(thats on the advanced options)
As for the titanium backup if you dont know how to use it, just youtube it or go over the threads here
Finally when doing the flash, make sure the trigger 3.2 file is on the sd card
And NO you dont have to go back to stock
1. Do all this without using the Rom Manager?!?!?!? - If I want to install it just download & Install, no any pre-requisit ?
2. when you say Wipe - you mean to "wipe data \ factory reset" or "wipe cache partition" ?
3. Flash, instal from sd = "install zip from sdcard" ?
4. Wait = how much time
5. Restore = Restore what?
Can you direct me to step by step guide for this or input some details?
Thanks alot
Check my signature links.
My steps will do what you need. Nothing more is needed/required.
s15274n said:
Check my signature links.
My steps will do what you need. Nothing more is needed/required.
Click to expand...
Click to collapse
Hi,
I checked your guide and even see the video and I have Q, about the "Rom Manager", I saw In your video that you Use it...
Someone told me that my current ClockWorldMod Recovery is old and I should upgrade it... (I couldn't find in the net \ this forum how to upgrade my current version...).
Someone told me:
1. download from market
2. install it with ROOT
3. click "Flash Clockwork Recovery" and boot to recovery
4. Re-install Packages - I DON'T HAVE THIS OPTION NOW
and from there like in your guide: backup,make all the Wipe, place rom on sd and choose "install zip from sd card"
1. Is it true and should work?
2. should I follow those steps (in this order)
3. should I make a backup before and after I download and "Flash Clockwork Recovery"
4. If I follow this orders should I see the "Re-install Packages" that I don't see now and should I need to use it ?
Sorry for all the questions but I want to "understand" (as much as can) what I'm doing.
Thanks Again
Earlier I was sending you messages from my phone while waiting for an appointment... let me try again...
You have the red voodoo recovery. You do not need anything else. Ignore Rom Manager and all that, you really do not need it, because your ROM replaced this recovery with the stock one. You are good.
Just download the rom
make backups
go flash the rom
enjoy
If you have a specific question or want a better explanation, just let me know.
responses in red.
asher_pa said:
1. Do all this without using the Rom Manager?!?!?!? - If I want to install it just download & Install, no any pre-requisit ? No, you have a recovery that allows you to make backups and flash roms already. Because of this, you can use the step by step guide I gave in post 2 and just be merry.
2. when you say Wipe - you mean to "wipe data \ factory reset" or "wipe cache partition" ?
Yes, and dalvik in advanced like another pointed out.
3. Flash, instal from sd = "install zip from sdcard" ?
Yes
4. Wait = how much time
After you flash the rom, let it just sit for about 10 minutes, then reboot, don't mess with the phone.
5. Restore = Restore what?Your apps if you backed them up... restore your launcher, contacts if you dont use google.. whatever you want to restore, just not system apps (green system apps like wifi and bookmarks should be okay though, exception to the rule for 2.2 > 2.2)
Can you direct me to step by step guide for this or input some details?
Thanks alot
Click to expand...
Click to collapse
when you say: "your ROM replaced this recovery with the stock one." do you mean that after install the new rom I need to make ROOT again? (sorry for my noob)
I make all install (without SIM on the phone).
after the reboot I saw the Android and after few scondes he say to inset sim....
Do I was have to install the new rom with the SIM in it?
PLEASE HELP? (for now I don't know what to do so I'll wait the 15 min)...
ANY SUPPORT? - is it OK?
thanks.
1. Install the ROM with a SIM card in...or if you didn't, insert it like it asks you to.
2. ROM Manager IS clockwork recovery. It is that menu you went into to flash the rom (can be green or red depending on your kernel installed). You don't need ROM Manager because whoever had the phone before you already installed ROM Manager at some point and hence, you have the Clockwork Recovery now as you saw.
3. After you install the new ROM, the boot up will take a long time. It is setting up all the system and configuring the operating system. After it finally boots, leave your phone for 10 minutes and just don't touch it. This gives it time to do a lot of configuration stuff it needs to do when it first starts up. After the 10 minutes are up, restart it. It will now start a lot quicker (like normal) and when its up, you can use it anyway you want. Hence, some first things to do would be to restore your contacts, programs (if you backed them up, settings, etc)
3. I really recommend you read a little bit more before you do flashing like this next time because if people here are not nice and don't lead you by the nose (or if you follow a step wrong), you can **** your phone. The procedure is easy. It is fairly foolproof but it is still advised that you have basic knowledge of what you are doing.
There are a lot of sticky threads on the forums that explain what things are. I recommend you have a look.
Thanks It look like everything is OK now (I read about 15 post before done this...)
Now my Phone Setting look like this:
FW : 2.2
Build : FROYO.UVKB5
KERNEL : 2.6.32.9
TRIGGER VERSION : 3.2- FINAL
BTW:
I'm still see "ClockWorldMod Recovery V2.5.1.3 - Voodoo Lagfix (ALL IN RED)"
1. Does my CWR was needed to be updated too - because its not ?
2. Should I update my kernel too ? - Is there any guide fort this?
Thanks.
SomeOne
I just want to be sure that everything is OK, and find out why my CWR didn't upgrade as well...
Thanks.
OMG!!!!!! Just follow the instructions! It's not rocket science; geez. I know of most noobs who wouldn't even ask this many questions even AFTER the guide/tutorial/step-by-step instructions are in front of them. I give you my word that you WILL NOT brick your Vibrant just by trial and error.
asher_pa said:
I just want to be sure that everything is OK, and find out why my CWR didn't upgrade as well...
Thanks.
Click to expand...
Click to collapse
I don't understand why you are so set on the CWR upgrading.... and just an FYI, the red recovery (.3) is a higher version than via Rom Manager (.2).
Be happy. Move on to something else now that YOUR PHONE IS FINE
(meant in the nicest way possible, hard to understand text via Internet).

HALP!

Ok. i followed the guide at the top of this forum to root my device. Everything seemed to work peachy. No errors, no nothing. I then attempted to use CWR to install Cyanogenmod 7.1. I used the guide on the Cyanogenmod wiki ***Link removed because of posting rules***
Because I rooted from here and installed CWR, I started at the part near the bottom.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the SD card.
Optional: Place the Google Apps .zip on the root of the SD card also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Optional: Select backup and restore to create a backup of current installation on the Samsung Galaxy S II (AT&T).
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the CyanogenMod update.zip.
Optional: Install the Google Apps by performing steps 7 - 9 again and choosing the Google Apps update.zip.
Once the installation has finished, select +++++Go Back+++++ to get back to the main menu, and select the Reboot system now option. The Samsung Galaxy S II (AT&T) should now boot into CyanogenMod.
Click to expand...
Click to collapse
The problem i have though is that when my device boots, it goes to the Samsung Splash screen and sits there with a yellow exclamation point. Does nothing else.
i did boot back into CWR and run my backup, so my phone is back, but I'm still clueless as to what would cause this. Any help please.
you need to go into CWM...format system and cashe, factory reset/data wipe....then install CM7, try it like that it should work.....some people have said to flash the CM7zip twice!
I did just notice something. The Zip for Cyan is titled "Update-cm-7.1.0-Galaxys2ATT-signed.zip". Does that mean it's an update and not the full install?
stalked_r/t said:
I did just notice something. The Zip for Cyan is titled "Update-cm-7.1.0-Galaxys2ATT-signed.zip". Does that mean it's an update and not the full install?
Click to expand...
Click to collapse
no. its the full install.
Boobie Watcher said:
you need to go into CWM...format system and cashe, factory reset/data wipe....then install CM7, try it like that it should work.....some people have said to flash the CM7zip twice!
Click to expand...
Click to collapse
Big thanks to you! I did the double install and it's working great (as far as I can tell). Thank you a ton!

Can someone help

Hey guys i am a new xperia u user
Need to know how to get costom rom for my phone..
Firmware- b.1.10
Android 4.0.4 (ics)
Not rooted right now...
Please help me..
Nd don't forget to write steps...
Thanks in advance..
Sent from my ST25i using xda app-developers app
Here:
dewanshu93 said:
Flashing Custom ROMs
STEPS:
Download any Custom ROM for Xperia U. You can get it from here.
Do read instructions in the thread because every ROM may have a different requirement of Kernel and way of installing but basic idea is same.
Place your ROM i.e. xxx.zip file in your Root of SDCard (in internal storage)
Power off the device
Power on and repeatedly press volume down (-) button after SONY logo appears until you see the recovery
Now to clear cache scroll down to wipe cache partition and select it and scroll down to yes
To clear data or do a factory reset scroll down to wipe data/factory reset and select it and scroll down to yes
To clear dalvik cache scroll down to advanced select it again scroll down and select wipe dalvik cache
After you perform all the steps press back to enter main menu
Scroll down to install zip from sdcard and select it
Scroll down to choose zip from sdcard and select it
Now scroll to the ROM i.e. xxx.zip and select it and scroll down to yes to confirm.
Press back and reboot system.
Click to expand...
Click to collapse
Before doing all this, your device must have root access and CWM Recovery install.
Dont know how do it? Use search button and dont be lazy person.
Please use the Q&A section for questions. see XDA rule #15. thanks

[Q] flashing cfw on sd with cwm the same steps or different?

hi i have used mindcr 2.9 rom i like it but wanted ro try different rom. well i have flashed mindcr many times cause i deleted something i need. so i toght i should try ankther rom in this case i chose simplicity v4 . but i cold not go into download mode only recovery so i wanted to flash back stock rom but i coldnt tried everything epcept the usb jig .. anyways i sent it to repair.. ill be getting it tomorrow. it was working only thing download mode did not work i tried all methods no luck . so here is my question... can you install another rom over mindcr with cwm? i search and many people said yes. so i did an phone got hard brick. if it dont matter then the procedure that i followes was wronf. are all roms installed trhu cwm in sd ca rd always the same dprocedure??? if so should i used the mindcr that i been using. any link for simplicity v4 ultimate i dont want v5 procedure from mind ans simplicity were almost the same are roms always installed the same procedure? i think if u can install a rom over anoher rom installed procedure from place i followed bricked my phone... thanks
It is best to install a Rom over stock. Even flashing over a Rom works sometimes. And yes every Rom is installed through cwm or e3 recovery. Simplicity v4 should be flashed the same way as mindcr Rom.
Sent from my GT-S5830i
Mohinkx said:
It is best to install a Rom over stock. Even flashing over a Rom works sometimes. And yes every Rom is installed through cwm or e3 recovery. Simplicity v4 should be flashed the same way as mindcr Rom.
Sent from my GT-S5830i
Click to expand...
Click to collapse
thanks mohink yes that is what am trying to do go back to stock and install a rom over it. but tried all the fixes into going to download mode except the jig usb as am in mexico in a really small town. so i took it to a place to get it flashed... so should i try the simplicity v4 following the mindcr procedure... since am new to android plataform ..
how do i do a buck up just in case i messed up is thereba way to buck up how????
i aint staying stock hahah just want tobmake sure i dobit the rifht way... thanks guys
When you go into CWM recovery, there should be a section called Backup/Restore. Back up here, it Will take about 150mb-350mb of your sd card depending on what you have. So if flashing your Rom goes wrong you can go back to CWM and restore.
Then follow the procedure which is
- Root
- CWM
- Mount everything (it should look like unmount/system, unmount/data etc)
- wipe data and cache
- Advanced » wipe dalvik cache
- Mount everything again
- Install .zip from sd. Find the Rom and flash it.
This procedure will definitely work. If it doesn't just restore and try again.
Also, don't say thanks, but press it if I helped you
Sent from my GT-S5830i
Mohinkx said:
When you go into CWM recovery, there should be a section called Backup/Restore. Back up here, it Will take about 150mb-350mb of your sd card depending on what you have. So if flashing your Rom goes wrong you can go back to CWM and restore.
Then follow the procedure which is
- Root
- CWM
- Mount everything (it should look like unmount/system, unmount/data etc)
- wipe data and cache
- Advanced » wipe dalvik cache
- Mount everything again
- Install .zip from sd. Find the Rom and flash it.
This procedure will definitely work. If it doesn't just restore and try again.
Also, don't say thanks, but press it if I helped you
Sent from my GT-S5830i
Click to expand...
Click to collapse
tahnk you mohinkkx .. yup already used the thanks button didnt know about it.. ill do jus that as sooos as i get it... here is the procedure that i flashed many times using mindcr..
1) Copy the rom file.zip and ClockWorkRec.zip in the root of your sd card.
2) Turn off the phone and turn it into recovery mode by pressing: Volume up + home + power. (To navigate the menu use the volume keys, to select the home, and back to return).
3) You are going to "apply update from sdcard" and choose ClockworkRec.zip
4) wipe data / reset - YES
5) advanced - Wipe Dalvik Cache - YES
6) Press back (go to main menu)
7) mounts and storage - format /system - YES
8) mount /system (it change to unmount) - Press Back
9) Select "install zip from sd" / "choose zip from sd card"
10) Select Rom.zip file - YES.
11) Wait Flashing. And press back.
12) reboot system now - Enjoy
raptorddd said:
tahnk you mohinkkx .. yup already used the thanks button didnt know about it.. ill do jus that as sooos as i get it... here is the procedure that i flashed many times using mindcr..
1) Copy the rom file.zip and ClockWorkRec.zip in the root of your sd card.
2) Turn off the phone and turn it into recovery mode by pressing: Volume up + home + power. (To navigate the menu use the volume keys, to select the home, and back to return).
3) You are going to "apply update from sdcard" and choose ClockworkRec.zip
4) wipe data / reset - YES
5) advanced - Wipe Dalvik Cache - YES
6) Press back (go to main menu)
7) mounts and storage - format /system - YES
8) mount /system (it change to unmount) - Press Back
9) Select "install zip from sd" / "choose zip from sd card"
10) Select Rom.zip file - YES.
11) Wait Flashing. And press back.
12) reboot system now - Enjoy
Click to expand...
Click to collapse
Okay this time, don't format system.
Sent from my GT-S5830i
Mohinkx said:
Okay this time, don't format system.
Sent from my GT-S5830i
Click to expand...
Click to collapse
will that erase the buck up.?? no phone yet i was tol they cnat get it flashed... ill go today see whatts the deal..
raptorddd said:
will that erase the buck up.?? no phone yet i was tol they cnat get it flashed... ill go today see whatts the deal..
Click to expand...
Click to collapse
No, the backup is on the sd card. Just don't format system.
Sent from my GT-S5830i
mohinkx said:
no, the backup is on the sd card. Just don't format system.
Sent from my gt-s5830i
Click to expand...
Click to collapse
ok i dont have it yeet.. Place where i send it could not unbricked it .. Sent it to other place i should b getting today if he cant then ill take it to telcel customer service..i dont think it has warraty though...

Categories

Resources