I'm not new to rooting, i used to have a rooted Evo. But all this DL09, EB01, stuff for the fascinate is getting confusing.
When i rooted my fascinate the first time i flashed a DL30 rom and my phone semi-bricked, it just hung at the samsung logo (i think the problem was i had the DL09 modem???). I had orange CWM but to get into it i had to go through stock blue recovery and apply update.zip every time. after i flashed the DL30 rom blue recovery wouldnt flash the update.zip, it said validation failed.
So i used odin to flash DJ01 stock, then the EB01 all in one root/recovery/SC 2.9, and then i flashed the red CWM-all. I no longer have blue recovery at all, which i think is good.
But now my problem is im afraid to flash a new rom. Since i no longer have to go through blue recovery to get to CWM i should be ok to flash anything right? If i mess it up so bad that it wont boot into the OS i should still be able to get into recovery and restore my backup regardless of what i flash through CWM right?
Also, on a related note. I have a theme for EB01 that i like (Im on SC 2.9 now). if i flash SC 2.9.2, then a new kernel, will my theme that worked on SC 2.9 still work on 2.9.2?
What I recommend is starting off getting an EB01 base.
Start here:
http://forum.xda-developers.com/showthread.php?t=1029436
After you Odin stock EB01/repartition, new recovery, radio, kernel of your choosing (make sure to enable voodoo lagfix if choosing a voodoo kernel)
For a rom I would download the debloated EC01 Rom here:
http://forum.xda-developers.com/showthread.php?t=1035420
From there flash a theme of your choosing, make sure to wipe cache/Dalvik before installing a new theme.
Just make sure to reboot after everything flash.
Follow the steps in the links I provided.
Fyi, EC01 is the newest. Also you can also wait till Monday as its rumored that Froyo will finally be released. From my reading it could most likely happen next week.
Hymizzle said:
What I recommend is starting off getting an EB01 base.
Start here:
http://forum.xda-developers.com/showthread.php?t=1029436
After you Odin stock EB01/repartition, new recovery, radio, kernel of your choosing (make sure to enable voodoo lagfix if choosing a voodoo kernel)
For a rom I would download the debloated EC01 Rom here:
http://forum.xda-developers.com/showthread.php?t=1035420
From there flash a theme of your choosing, make sure to wipe cache/Dalvik before installing a new theme.
Just make sure to reboot after everything flash.
Follow the steps in the links I provided.
Click to expand...
Click to collapse
That is not the question i asked. Im asking if its safe to flash any rom/kernel/theme now that i have red CWM. When i had orange CWM and had to go through blue recovery to get to it i hosed my system partition, couldnt get to CWM, and had to flash back to stock through odin.
So just to clarify. Is it safe to flash whatever i want now that i have red CWM?
Yes you should be ok. I flashed over twenty different themes thru CWM red. Just don't forget to wipe before.
holy cow
10 chars
ghostt021 said:
Yes you should be ok. I flashed over twenty different themes thru CWM red. Just don't forget to wipe before.
Click to expand...
Click to collapse
Super clean 2.9.2 comavolt w/Alien Black theme
Flashing THemes
I've downloaded two files....
One is a theme zip file
Two is an applications zip file, associated with the theme.
When I attempt to flash them using CW, it only shows the ROM files, as options to flash...
Help !!
Badger51 said:
I've downloaded two files....
One is a theme zip file
Two is an applications zip file, associated with the theme.
When I attempt to flash them using CW, it only shows the ROM files, as options to flash...
Help !!
Click to expand...
Click to collapse
How did you download them, to where did you download them?
Theme zip files
I downloaded them to my dropbox folder, on my SD card
I think your a bit rushing thru this. Cool down, a read a bit more, and show a bit more patience. Could you elaborate a little bit more? What theme are you installing, and is it specifically for the Fascinate?
Cooling down
Cooling down is always good advice..
Not sure what you want me to elaborate on...
TheSonicEmerald said:
I think your a bit rushing thru this. Cool down, a read a bit more, and show a bit more patience. Could you elaborate a little bit more? What theme are you installing, and is it specifically for the Fascinate?
Click to expand...
Click to collapse
Just a heads up Sonic. He also posted this question over in the themes section so he may be getting confused trying to switch back and forth and possibly getting different answers between the two threads. Just don't want you to waste your time of giving him the correct advice like you are doing, and have it go for naught.
Related
I just download roms directly on my phone, go to rom manager, install rom from sd card, check wipe data and cache, and reboot. everything has worked fine so far, I've installed 3 different roms every since I started and am currently running nero v3 with voodoo enabled.
You want to odin back to stock as I understand it roms can leave behind traces of themselves or not be compatible with new ones so it's best to use odin to make sure that nothing is left of them
willsnews said:
You want to odin back to stock as I understand it roms can leave behind traces of themselves or not be compatible with new ones so it's best to use odin to make sure that nothing is left of them
Click to expand...
Click to collapse
ahhh ok. damn I need to install windows on my latop asap. thanks.
junglerumble said:
I just download roms directly on my phone, go to rom manager, install rom from sd card, check wipe data and cache, and reboot. everything has worked fine so far, I've installed 3 different roms every since I started and am currently running nero v3 with voodoo enabled.
Click to expand...
Click to collapse
The way you download roms and flash them is a very easy way to do it. BUT, seeing as you are using a rom that has voodoo embedded, learning how to properly use odin is very important. All is well, until you forget to disable voodoo and flash something else and your phone gets hung up in the boot screen.
I stayed away from odin for as long as I could. Flashing thru CWM was far too easy. That was until I did exactly what I just mentioned and forgot to disable voodoo. Then I had to learn quick, fast, and in a hurry.
Take my advice. Read up on odin as much as you can to save yourself some trouble later on. Do yourself another favor and download all the necessary tools for it, as well.
is using odin on ubuntu ok? I got odin running through wine but I don't wanna brick my phone thinking everything will work properly lulz.
Just updated flashed my phone to Axura 2.3.1.2 and for some odd reason the boot animation keeps rebooting. I've disabled voodoo lag fix and I am still experiencing the same problem. :-?
Previous rom was axura 2.2.1 froyo rom for eclair
diceburna said:
Just updated flashed my phone to Axura 2.3.1.2 and for some odd reason the boot animation keeps rebooting. I've disabled voodoo lag fix and I am still experiencing the same problem. :-?
Previous rom was axura 2.2.1 froyo rom for eclair
Click to expand...
Click to collapse
Which rom specifically?
Also you shouldnt have to disable voodoo if you are coming from another voodoo rom.
have you tried reflashing the rom?
I got the same prob. Try to get back to stock T959UVJFD using odin and reflash.
Axura is nice but it shows many compatible troubles when trying with different kernels/mod.
I tried reflashing several times but no luck so far. And the previous rom I was using was the froyo rom for eclair the download zip file name is AXURA22VE...I'm thinkin I should probably have ODIN to stock Eclair, then update my phone to stock froyo before flashing this rom.
dont bother with stock froyo just odin to jfd then root install cwm and flash the rom
going to stock froyo includes the updated 3e recovery which can be circumvented but requires extra work on your part.
Thx shreddintyres :-D
You know I forgot to state this earlier but I can get to recovery mode (cwm v2.5.1.3 red lettering not green) should I just do a backup and restore from there?!?! I am not sure if the axura 2.3.1.2 file I have is corrupt or is it something I am doing wrong on my end when flashing the rom?
diceburna said:
Thx shreddintyres :-D
You know I forgot to state this earlier but I can get to recovery mode (cwm v2.5.1.3 red lettering not green) should I just do a backup and restore from there?!?! I am not sure if the axura 2.3.1.2 file I have is corrupt or is it something I am doing wrong on my end when flashing the rom?
Click to expand...
Click to collapse
Sounds like a bad download to me. I would redownload it. I flash in the red cwm all the time.
nomadrider123 said:
Sounds like a bad download to me. I would redownload it. I flash in the red cwm all the time.
Click to expand...
Click to collapse
same here
@op when did you download axura 2312? the D4A server went down a couple days ago and we are trying to restore all the files on the new site.
Redownloading 2312 will be not be possible at this point in time, i have posted a download for 2310 in the Axura development thread until the site is fully functional again. there isnt a very large difference between 2310 and 2312.
if you are still able to add files to your phone i would try to flash from CWM first otherwise if you cant jfd will be your only choice.
Hope this Helps
Thx guys I'm in the process of recovering from cwm now, tbh I haven't used ODIN before so before I try it hopefully my nandroid backup will restore everything. I downloaded the 2.3.1.2 rom I believe the day it came out.
the downloads on the d4a webiste are back up for the vibrant rom
http://devsforandroid.com/index.php?topic=23.0
Sweet I just finished dl'ing 2.3.1.3 hopefully it all works out. BTW I was able to easily restore my backup...flashin new rom now will update soon.
thanx men that really helps
All is well :-D I guess the old file I had was corrupted bc I flashed this rom w/ no problems at all...Thx
i just got my phone running ED01 today and it unrooted my phone. i rerooted it and all that jazz but my question is this...
i can't reboot into cwm recovery?
it just reboots me back into stock recovery.
do i download the latest cwm, rename it to update.zip (not update.zip.zip) and problem solved?
Put a new kernel on your sd card. As soon as you finish rooting, boot immediately into cwr and flash the kernel. If you let the phone boot before you do this, the stock kernel overwrites the recovery.
This happened to me earlier today and had me pulling my hair out. Nemesis2all had the answer.
yes! YES! that was just what i needed.
thank.you.
Ughh. I am having a very similar problem and I have been trying to solve it for the past 4 hours with no luck. Could you please tell me what you did to resolve this?
I was on SC 2.9 with JT's TW voodoo kernel. I decided to go back to stock and start from scratch by flashing the DI01 all in one Odin package in Odin. (I disabled voodoo before doing this). Everything went smooth as butter. I then got the vzw prompt to OTA Froyo. I downloaded and installed it just fine. I then re-rooted. Now I am having a hard time trying to get CWM to flash/install. I flashed 'cwm-recovery-all' in odin. Odin says it was successful and reboots my phone. When I try to boot into recovery, it goes to the blue android 2e screen. I go to 'apply update.zip and thats when I keep getting errors.
"E: failed to verify whole-file signature
E: signature verification failed "
I'm sure I am forgetting a step or missing something
farewell_goodbye2u said:
Ughh. I am having a very similar problem and I have been trying to solve it for the past 4 hours with no luck. Could you please tell me what you did to resolve this?
I was on SC 2.9 with JT's TW voodoo kernel. I decided to go back to stock and start from scratch by flashing the DI01 all in one Odin package in Odin. (I disabled voodoo before doing this). Everything went smooth as butter. I then got the vzw prompt to OTA Froyo. I downloaded and installed it just fine. I then re-rooted. Now I am having a hard time trying to get CWM to flash/install. I flashed 'cwm-recovery-all' in odin. Odin says it was successful and reboots my phone. When I try to boot into recovery, it goes to the blue android 2e screen. I go to 'apply update.zip and thats when I keep getting errors.
"E: failed to verify whole-file signature
E: signature verification failed "
I'm sure I am forgetting a step or missing something
Click to expand...
Click to collapse
First, grab a TW kernel, for example JT's TW voodoo kernel and place it on ur SD card. Next remove battery and enter download mode so u can Odin CWR. Once it's done u should see that it succeeded flashing CWR in Odin. Next reinstall battery and enter recovery mode by holding down both volume buttons and power button. Once u see the samsung logo, release and it should enter red CWR. Then flash the TW kernel and reboot. U should be golden. There's no update.zip file to worry about.
As mentioned on the previous post, the stock kernel overwrites CWR and defaults back to stock blue recovery. Good Luck...
will survive said:
First, grab a TW kernel, for example JT's TW voodoo kernel and place it on ur SD card. Next remove battery and enter download mode so u can Odin CWR. Once it's done u should see that it succeeded flashing CWR in Odin. Next reinstall battery and enter recovery mode by holding down both volume buttons and power button. Once u see the samsung logo, release and it should enter red CWR. Then flash the TW kernel and reboot. U should be golden. There's no update.zip file to worry about.
As mentioned on the previous post, the stock kernel overwrites CWR and defaults back to stock blue recovery. Good Luck...
Click to expand...
Click to collapse
Thank you so much for the help. I will try this now and report back.
Edit: You are a genius! Back up and running and voodoo enabled in 15 mins thanks to you. It was great hearing the voodoo robot voice again. Haha. Thanks again kind sir and everyone here at xda for being such great help in a time of need. Now off to choose a good rom!
Sent from my SCH-I500 using XDA App
farewell_goodbye2u said:
Thank you so much for the help. I will try this now and report back.
Edit: You are a genius! Back up and running and voodoo enabled in 15 mins thanks to you. It was great hearing the voodoo robot voice again. Haha. Thanks again kind sir and everyone here at xda for being such great help in a time of need. Now off to choose a good rom!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Glad it worked out for u.
As for ROM's, I am currently trying out Evil Fascination v3.3.1. So far loving the rom.
will survive said:
Glad it worked out for u.
As for ROM's, I am currently trying out Evil Fascination v3.3.1. So far loving the rom.
Click to expand...
Click to collapse
that was exactly my problem too but after flashing a custom kernel everything is running smooth. and i'm trying out evil fascination and it is GREAT
djdeaver said:
that was exactly my problem too but after flashing a custom kernel everything is running smooth. and i'm trying out evil fascination and it is GREAT
Click to expand...
Click to collapse
Couldnt agree more. This rom is great. I wouldn't expect anything less from Nitro. Also, I took my phone off the charger an hour and a half ago and im at 99%. I would have been at 87 - 90% before using this new combination.
Edo1 radio
Jts TW voodoo 4/15 kernel
Nitro evil fascination rom.
Sent from my SCH-I500 using XDA App
Allright, so there I was, running a rather stable Comm Rom 2.0 Voodoo Rom with the ED10 Kernel/Radio, and then I saw the thread on the OMFGB GB release, that I, of course, just HAD to have...
So, my first mistake was being impatient and not being able to find any installation notes, and pretending that I knew what I was doing by installing the rom via CWM mod.
Here's the rub, for some reason, whenever I did the 3 finger salute, it would pull a RED CWM that went orange when I applied update.zip ... because if I tried to install rom from sd card with the initial CWM boot, it wouldn't install anything, it would just error out unless I applied update.zip. After selecting apply update from zip, it would boot the orange CWM and allow me to install whatever I wanted...
So after applying the OMFGB rom, it showed the Fascinate/ Cyanogenmod 7 bootscreen, then went to boot loop. I panicked, pulled the battery, then backed up everything to my computer, and formatted the sd card in FAT32 with Windows 7 64 bit...
Shortly thereafter, I was using ODIN and the original "return to stock" files, and ended up getting into the stock OS.
Now I never show 3G or even 1x, and never pull data at all... when I go to place calls, it says that verizon cannot authenticate my phone... when I activate, it reboots and says everything was successful, but was noticeably a faster process than standard activation. Upon reboot, nothing improves... the os is there, everything shows that everything is fine, yet I am still not able to place calls...
Here is where it gets weird... My wife called me today, and the call came through... I received text messages, but still couldn't make calls... My bill is zeroed out, I'm not locked out that I know of, and I just want my phone working again...
Running out of ideas. I have flashed ED01 DL01 and even reapplied the stock .PIT in odin... I am going to try heimdall while I wait for help from here, but any quick help would be GREATLY appreciated...
I believe the issue is you need to convert your system to mtd before flashing omfgb...some one correct me if I'm wrong though as I don't want to spread false info.
but Try installing jt's 0704 cm7 build following his instructions, then install his 0713 build (possible unnecessary step but it worked for me), then flash omfgb. You will most likely have to flash jt's fixed cwm to subsequently flash his cm7 as I had to since I was coming from a stock restore. And now I'm running a blazing fast omfgb...I was able to restore all my apps and data in half the time it took on com rom...good luck let me know how it goes
Sent from my SCH-I500 using XDA App
riceje7 said:
I believe the issue is you need to convert your system to mtd before flashing omfgb...some one correct me if I'm wrong though as I don't want to spread false info.
but Try installing jt's 0704 cm7 build following his instructions, then install his 0713 build (possible unnecessary step but it worked for me), then flash omfgb. You will most likely have to flash jt's fixed cwm to subsequently flash his cm7 as I had to since I was coming from a stock restore. And now I'm running a blazing fast omfgb...I was able to restore all my apps and data in half the time it took on com rom...good luck let me know how it goes
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I will definately take this into consideration, but first i want to confirm that my phone is in full working order...
I appreciate the quick response, and hope to get some more love from the community.
Sent from my Transformer TF101 using XDA Premium App
sounds like your modem may be messed up
this is what i would do:
1) Odin this it is an "Stock" ED01 DB/DO
http://www.multiupload.com/9JSTWA6Y6L
LET IT BOOT FULLY
2) flash the CWM in the OP of CM7
3) Do all Wipes then Flash CM7 0704
let boot fully
USE the Shutdown menu to get to orangeCWM
4) Do all Wipes then flash CM& 0713
let boot fully
USE the Shutdown menu to get to orangeCWM
5)Flash OMFGB
pull battery & 3 finger salute to redCWM
6) Do all Wipes then re-Flash CM7 0704
reboot and bingo you are at OMFGB
xwhofarted said:
sounds like your modem may be messed up
this is what i would do:
1) Odin this it is an "Stock" ED01 DB/DO
http://www.multiupload.com/9JSTWA6Y6L
LET IT BOOT FULLY
2) flash the CWM in the OP of CM7
3) Do all Wipes then Flash CM7 0704
let boot fully
USE the Shutdown menu to get to orangeCWM
4) Do all Wipes then flash CM& 0713
let boot fully
USE the Shutdown menu to get to orangeCWM
5)Flash OMFGB
pull battery & 3 finger salute to redCWM
6) Do all Wipes then re-Flash CM7 0704
reboot and bingo you are at OMFGB
Click to expand...
Click to collapse
Trying this in about 15 minutes, will report asap...
Again, thanks for help...
Sent from my Transformer TF101 using XDA Premium App
when you say OP of CM7 thread, which one, there seem to be many CM7 threads... link please?
martyr2k6 said:
when you say OP of CM7 thread, which one, there seem to be many CM7 threads... link please?
Click to expand...
Click to collapse
also, lets assume I am completely as stock as possible... how should I get CWM on, and which version please link...
Also it miht be worth mentioning, though I think I already did... but when I go to activate my pjone, it says its successful, but then I go to make a call and it say that verizon annot authenticate my phone...
Here's a confusing screenshot...
Sent from my Transformer TF101 using XDA Premium App
Alright the issue is resolved, my main concern was whether or not I could use my phone for phone calls... after finally mustering up the guts to call Verizon, it turned out that the main problem in which I was experiencing was due to some form of typical midnight updates that big red does... apparently, my phone, missed some form of update that ended up de-authorizing my phone, but Verizon was able to help out, even at this late hour.
On the good note, everything went through just fine as far as flashing cm7... I just seem a bit conflicted with which rom is best. I guess its just a matter of personal preference, really. So far I prefer jt's rom just fine, but I might be switching back and forth between jt's and omfgb...
Thanks again for all the help folks, I appreciate it more than you could know.
Sent from my Transformer TF101 using XDA Premium App
xwhofarted said:
sounds like your modem may be messed up
this is what i would do:
1) Odin this it is an "Stock" ED01 DB/DO
http://www.multiupload.com/9JSTWA6Y6L
LET IT BOOT FULLY
2) flash the CWM in the OP of CM7
3) Do all Wipes then Flash CM7 0704
let boot fully
USE the Shutdown menu to get to orangeCWM
4) Do all Wipes then flash CM& 0713
let boot fully
USE the Shutdown menu to get to orangeCWM
5)Flash OMFGB
pull battery & 3 finger salute to redCWM
6) Do all Wipes then re-Flash CM7 0704
reboot and bingo you are at OMFGB
Click to expand...
Click to collapse
Not sure that I totally understand as to why I need to flash cm7 0713, then omfgb, then reflash cm7 0704... seems a bit redundant.
If you could clarify this for me and what improvement this offers, I would appreciate it.
Sent from my Transformer TF101 using XDA Premium App
Because omfgb apparently doesn't convert to mtd but cyan does, so you have to flash cm first
Sent from my SCH-I500 using XDA App
riceje7 said:
I believe the issue is you need to convert your system to mtd before flashing omfgb...some one correct me if I'm wrong though as I don't want to spread false info.
but Try installing jt's 0704 cm7 build following his instructions, then install his 0713 build (possible unnecessary step but it worked for me), then flash omfgb. You will most likely have to flash jt's fixed cwm to subsequently flash his cm7 as I had to since I was coming from a stock restore. And now I'm running a blazing fast omfgb...I was able to restore all my apps and data in half the time it took on com rom...good luck let me know how it goes
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yup, that was your mistake. prior to flashing omfgb, you need to be on jt's cm7.
I'm too lazy to read all the posts but try flashing cm7 via cwm4. then, Odin back to stock using the right files and configurations. there's a sticky in the development section.
Hello all, I want to install Clockworkmod on my Samsung Vibrant T959 so I can install a custom ICS ROM. I ran into some problems along the way. I can not seem to install CWM correctly. I had the phone under Froyo 2.2, kernel version 2.6.32.9, and build number froyo.uvkb5. After flashing the recovery by ROM Manager, I would still be stuck at the stock recovery. I have the correct files to download:update.zip. After clicking on "reinstall packages", the recovery said "replacing stock recovery with Clockworkmod recovery". The problem is that after that message, the phone restarts into the stock recovery. I tried it 4 times in a row, but I'm still stuck at the stock recovery. The system keeps saying that it will replace the stock recovery with the CWM recovery, but that did not happen with me. I would keep getting the same message when I click on "re install package". What am I missing that does not allow me to do this? Thanks all.
Are you on 2.1 eclair or 2.2 froyo?
I'm pretty sure you need to be on 2.1 but don't quote me.
Also, I believe there is an issue with the newer versions of ROM manager, recovery mismatch. (Again don't quote)
I haven't had to mess with that stuff in a long time. Either way I'm posting a link that will help you along. If you have any more questions just shoot.
http://forum.xda-developers.com/showthread.php?p=9375927
Paranoid, sitting in a deep sweat...
Thanks for the reply. Like I said in my last post, I am running at Froyo 2.2. I already bricked my phone for failing to downgrade to 2.1. I already rooted my phone, my problem is that I could not install CWM correctly by the stock rom. After the message states that it is replacing the stock rom, my phone goes back to stock with no changes.
woodrube has some great guides, I use the update.zip method, rom manager didnt like my phone, post if you still have problems and Ill give you more accurate directions on guides.This is probably heresy, but i never could get rom manager, even pro to do what I wanted,and Im sure it was me.
Your positive you dont have a 4g?
Sugartibbs said:
woodrube has some great guides, I use the update.zip method, rom manager didnt like my phone, post if you still have problems and Ill give you more accurate directions on guides.This is probably heresy, but i never could get rom manager, even pro to do what I wanted,and Im sure it was me.
Click to expand...
Click to collapse
You do not understand, I am having the problem that CWM could not install properly. When I chose "install packages" the steps went by and ended with "Replacing stock recovery with CWM recovery". Usually, that would jump straight into CWM recovery after it's installed. That did not happen to me, After installation, my phone restarted and booted back into stock recovery. I tried installing again but I always go back to stock recovery and not Clockworkmod recovery as I planned.
Ive never seen that error message, I know its frustrating, but the t959v 4g comes loaded with Froyo 2.2,the a 2.1 eclair odin will brick it.Just trying to help.
Go back to 2.1, uninstall ROM manager, use the update zip in the guide link I posted.
Paranoid, sitting in a deep sweat...
---------- Post added at 11:06 PM ---------- Previous post was at 10:44 PM ----------
In the link I sent is the AIO toolbox download. There is a guide how to use it in this link. The DL links are dead in this one so get from previous.
Paranoid, sitting in a deep sweat...
IIRC the update.zip method does not work in Stock 2.2 because of the 2e and 3e recovery mismatch. If you to go to 2.1 Eclair, then you can use the update.zip method and then flash your ROM of choice after that. If you decide to stay on 2.2, you'll have to get the 3e method. It is in the Development section, so you'll just have to search 3e and it should come right up.
All this is provided you have a T959 (3g) and not a T959v (4g). Sorry but lately there have been many 4g users flashing our ROMs and then freaking out.
You can also find a bunch of files in my Repo thread stickied in the Dev section.
samsgun357 said:
Go back to 2.1, uninstall ROM manager, use the update zip in the guide link I posted.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Maybe you'll get it now.
Good luck.
@Woody, thanks buddy.
I linked your repo thread in my previous post.
Edit: well the link isn't in my posts, must not have sent??? But here it is
http://forum.xda-developers.com/showthread.php?p=31279153
Paranoid, sitting in a deep sweat...
Click to expand...
Click to collapse
The first thing you need to do after obtaining root is flash a kernel. You can't install a rom from re-install packages. That has to be done in a custom recovery, which is built into the kernel. Easiest way to do that is download a kernel and flash it with sgs kernel flasher. I would suggest immortality kernel. After that you can go into the custom recovery and flash your rom of choice.
nfkod said:
The first thing you need to do after obtaining root is flash a kernel. You can't install a rom from re-install packages. That has to be done in a custom recovery, which is built into the kernel. Easiest way to do that is download a kernel and flash it with sgs kernel flasher. I would suggest immortality kernel. After that you can go into the custom recovery and flash your rom of choice.
Click to expand...
Click to collapse
^^ this is not true.
I had a issues with my apps doing the same thing. I had to get busy box and install a older ver 19.2. It corrected the issue. Updating superuser caused my headache
Sent from my SGH-T959 using xda premium
naturallight said:
I had a issues with my apps doing the same thing. I had to get busy box and install a older ver 19.2. It corrected the issue. Updating superuser caused my headache
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
I have no idea what you are talking about?????
Paranoid, sitting in a deep sweat...
If you have the proper xda version of update zip on your sd...,, theres no need for a kernel flash.
I have the same exact issue as the original poster. 2.2 froyo and all. I even replaced my stock 3e recovery with the modded one, but I get the same issue. Says its flashing CW recovery but it always reboots and comes back with the stock recovery. What exactly are we doing wrong?
Follow steps in this guide, update.zip b is probably best but you need to Odin back to stock first.
http://forum.xda-developers.com/showthread.php?p=9375927
Alright so I managed to get CWM on my 2.2 Stock Vibrant and even got it permanently. What I did was download SGS Kernel Flasher and install it. Then I went the Samsung Vibrant Kernel Bible and found the stock kernel with Voodoo lagfix included that matched my phone (because the kernel has CWM built in) downloaded it, and placed it on the root of my card. Launched the app, backed up my current kernel and then flashed the new one. Everything went smooth and then my phone rebooted and was stuck on the Vibrant screen for 20 minutes. I was pretty sure I messed my phone up. Also it was talking to me which I didn't realize at first, because I was expecting my phone to be talking to me! Finally made out what it said and it said something along the lines of not enough space on the partition, closing... It was hard to understand because it was in a robotic voice. It eventually rebooted and loaded up like normal. Checked the about phone but saw nothing different. So I decided to reboot to recovery just to check and sure enough, CWM 2.5.1.3 comes up, and comes up every time Finally, now to figure out what to do to get on a jellybean ROM
When I say Odin to stock that's 2.1 eclair. Voodoo lagfix will cause issues going to a JB ROM.
You don't need to try and re-invent the wheel.
Odin to stock 2.1 eclair JFD.
Put ROM on sdcard
Go to recovery, install update.zip from guide I linked.
Wipe and flash ROM.
It can't get much easier. I am not trying to come off as a ****, only to help you, and avoid future issues.
BTW, I saw your pm, I can't reply because it keeps crashing the app. If you go in and disable voodoo lagfix you should be able to flash PA without issue. It will take 3 flashes. You only need to wipe before the first flash. Wipe cache, dalvik cache, factory/data and format system in mounts and storage. If you get in a boot loop, pull battery then use button combo back to recovery. GB boots are not required.
samsgun357 said:
When I say Odin to stock that's 2.1 eclair. Voodoo lagfix will cause issues going to a JB ROM.
You don't need to try and re-invent the wheel.
Odin to stock 2.1 eclair JFD.
Put ROM on sdcard
Go to recovery, install update.zip from guide I linked.
Wipe and flash ROM.
It can't get much easier. I am not trying to come off as a ****, only to help you, and avoid future issues.
BTW, I saw your pm, I can't reply because it keeps crashing the app. If you go in and disable voodoo lagfix you should be able to flash PA without issue. It will take 3 flashes. You only need to wipe before the first flash. Wipe cache, dalvik cache, factory/data and format system in mounts and storage. If you get in a boot loop, pull battery then use button combo back to recovery. GB boots are not required.
Click to expand...
Click to collapse
QFT. Just yesterday I ran into the same problem as reported by the OP and a few others. I HAD to downgrade to 2.1 via JFD Odin. Then flash the update.zip. I then just downloaded ROM Manager to get CWM working. However, I did see in some instructions that sometimes even though you know you have CWM installed, it will still default to stock recover. I simply applied the update.zip again and it eventually fixed itself. Not sure what that was about, but I did see it in some instructions, and I experienced it as well.
nfkod said:
the first thing you need to do after obtaining root is flash a kernel. You can't install a rom from re-install packages. That has to be done in a custom recovery, which is built into the kernel. Easiest way to do that is download a kernel and flash it with sgs kernel flasher. I would suggest immortality kernel. After that you can go into the custom recovery and flash your rom of choice.
Click to expand...
Click to collapse
great help dude.i fixed finaly."""""thanks"""""