Related
Has anyone found any decent cases or sleeves for this tablet yet?
It's dimensions are listed as 271x176x12.9mm, which makes it longer than the iPad, as well as longer and wider than the Xoom, so I imagine most cases for those devices will be too small (or it'll protrude through the opening.)
At the same time, lots of netbook cases are around, but they seem to extend by 1 or 2cm too far in each dimension. Closest appears to be the Belkin 10.2" cases on Amazon.
There's a comparison of sizes here:
http://www.sizeasy.com/page/size_co...om-vs-Samsung-Galaxy-Tab-10-1v-vs-Apple-iPad2
http://www.proporta.com/F02/PPF02P05.php?t_id=5653&t_mode=des
Looks like it might work - size wise it seems the transformer will fit.
For the moment I am going to keep my transformer in the case I used for my Asus EEE PC Netbook, just hope it fits!!!
I also contacted tuff luv as I adore their cases and have one for my Kindle and love the fact I can prop it up and read it. They say there going to look into it and to contact them again in a couple of weeks, I really hope they do a case.
I got on of these as a temporary measure. .
http://www.amazon.co.uk/AmazonBasic...1_6?s=computers&ie=UTF8&qid=1302631132&sr=1-6
Fits well enough, of somewhat unspectacular..
REALLY hoping Yoobao do a transformer version of their magic case.. have emailed them to enquire.. mebbe i enough of us register our interest.. Hint.. hint
I still haven't found a case :'( I'm using a net book neoprene case which is too big, do we need to consider the keyboard as well... might make it harder to get the case.
Sent from my Transformer TF101 using Tapatalk
Ive got one of these and it fits pretty well.
http://www.argos.co.uk/static/Product/partNumber/9295706.htm
I got one of these anticipating my Transformer but after getting it, I'm pretty sure it will be about .5 inch short.
www .amazon.com/AmazonBasics-Netbook-Handle-10-Inch-Netbooks/dp/B002VPE1Q6/ref=sr_1_1?ie=UTF8&qid=1302649243&sr=8-1
The Transformer is long and narrow unlike all other tablets.
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
andyfoster said:
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
Click to expand...
Click to collapse
Looks like this one on Amazon?
http://www.amazon.co.uk/A1CS-tablet...66/ref=sr_1_24?ie=UTF8&qid=1302711288&sr=8-24
Edit: blah, ignore - just noticed that's for 7" tablets.
steftymo said:
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
Click to expand...
Click to collapse
Wow, those look really nice. I'll email and see what they say.
Edit: Have just been emailing with the lady that makes them. She's confident she can make something up for it and is going to send me a sample. I'll keep you posted!
case
I just bit the bullet and ordered this one for now:
www.amazon.co.uk/exec/obidos/ASIN/B0045D88I4/ref=ox_ya_os_product
Size is 270x200x25 mm which is the closest I could get to the Transformer size. It should arrive in a couple of days and then I will report back.
rio
This looks like a perfect fit from the listed dimensions:
http://www.gearzap.com/pakuma-eco2bag-cocoon-10-netbook-sleeve-black-and-jasper-red.html
Anyone know the height of the keyboard? Don't want to buy a sleeve yet until I know both the tablet & keyboard are going to fit in it!
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
leeharo said:
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
Click to expand...
Click to collapse
maybe im not sure. but isnt the transformer 16:10? its pretty widescreen so itll be a little lengthy compared to netbooks i think. im not quite sure.
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
bobcatuk said:
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
Click to expand...
Click to collapse
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
My sample "Wrapper", as linked above, arrived this morning and it's very nice indeed! Perhaps a little small width ways but I've sent my feedback and I think they're going to re-work it a little. Once they've got the final design down-tap I'd recommend them without hesitation.
Noiz said:
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
Click to expand...
Click to collapse
I guess i can see what you mean about the zip, but im traveling around with work next week and wanted something quick to stop it getting battered in my laptop bag with everything else that is in there.
It will do for the moment until either an official case comes out or a good alternative is found, I will hold onto the receipt and packaging that came with it, if it turns on the power constantly when im away next week i will take it back.
The TeckNet iPad Leather Case for Apple iPad is exactly the type of thing I want, only designed for the eeePad!!!
I'd link you to the page on Amazon, but I've not posted enough on here yet to put up external links! (GRRR!)
Hi guys,
I'm a new Vega user and it came supplied with a neoprene sleeve which is fine as a stop gap but I'm now needing something a bit more substantial.
I'm after a case that the vega stays in permanently but it must have 2 key features.
1) Stiff front to protect the screen when the case is closed and the tablet is in my rucksack
2) double up as a stand in landscape mode
Cheaper the better as my budget is tight, so not expecting anything too remarkable.
I've trawled eBay but none I've seen mention both of the above, so I thought I'd ask here for people's opinions on what they have in daily use.
Links to stores in the uk or eBay uk appreciated, but not essential, as long as I know what I'm looking for.
Cheers,
Malty
Lol maybe see the thread below ures
Sent from my GT-I9100 using XDA App
had already read through that thread.
Been thinking about this one..
http://cgi.ebay.co.uk/ws/eBayISAPI....95170&ssPageName=STRK:MEWAX:IT#ht_4335wt_1156
£11 delivered
I would NOT use that eBay seller, personally, for 2 reasons.
Firstly, they describe the case as "leather", when it obviously isn't. If they will lie about that, what else will they lie about?
Secondly, their negative and neutral feedback suggests that they are not especially nice people to deal with.
The best case to meet your 2 criteria would be the official folio case. It offers the protection you require, only problem is it is not the cheapest case. But in the end you get what you pay for. Totally happy with mine, keep the vega in it all the time.
I don't mind paying if it's right.
Can that one be used as a landscape stand? I've seen it mentioned but never seen a picture of it as such.
Cheers,
Malty
You Can. Posted pics Here: http://forum.xda-developers.com/showthread.php?t=908230
I saw that pic (I presume the one in your first post) but wasn't sure how it was held in place.
Is the case locked in that position somehow or is it just held by friction on the desktop ?
cheers,
malty
It is held by friction. My case is a little lose, but a friend of mine has one which is a nice snug fit. Mine was not bad enough to warrant the trip back to currys. You could always take your vega with you and try before you buy.
I like this one. it's over my actual budget , but I'll get one sooner or later.
http://www.dhgate.com/new-arrived-g...dvent/p-ff8080812ec7242a012eeb2a3ee4528c.html
Harplo said:
I like this one. it's over my actual budget , but I'll get one sooner or later.
http://www.dhgate.com/new-arrived-g...dvent/p-ff8080812ec7242a012eeb2a3ee4528c.html
Click to expand...
Click to collapse
That is a nice looking case. Same design as my v-smart Armour case for desire hd. Expensive thought...
original_ganjaman said:
It is held by friction. My case is a little lose, but a friend of mine has one which is a nice snug fit. Mine was not bad enough to warrant the trip back to currys. You could always take your vega with you and try before you buy.
Click to expand...
Click to collapse
sadly they don't have any stock at my local currys or pcworld. They also have no vega's in stock but they do have one on display
Oh and I didn't mean what keeps the tablet inside the case, I meant what keeps the case upright in landscape mode ?
Did anyone notice the official Folio case got pulled from pc world? Do you think the TF101 cases would work? The dimensions are very similar, the vega is about .6mm deeper, 4mm wider and 4mm taller.
I bought this case for my Vega
ebay.co.uk/itm/250877574917?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Its cheap and it works, the inner that holds the Vega can be rotated round so it can be either horizontal or vertical, it has 3 slits at the bottom so you can fold it into a stand and choose what angle you want it held.
It also comes with (another) microsd to sd card, a stylus, a cleaning cloth and a single screen protector.
I have been impressed with it so far and for £13 its a steal.
I think im gonna get a custom case made. I'll probly use felt, real leather costs loads!
lareeth said:
I bought this case for my Vega
ebay.co.uk/itm/250877574917?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Its cheap and it works, the inner that holds the Vega can be rotated round so it can be either horizontal or vertical, it has 3 slits at the bottom so you can fold it into a stand and choose what angle you want it held.
It also comes with (another) microsd to sd card, a stylus, a cleaning cloth and a single screen protector.
I have been impressed with it so far and for £13 its a steal.
Click to expand...
Click to collapse
I have been looking at this and similar cases on ebay but want to know a few things first.
1. Is the case specifically for the vega or is it generic eg, are ports accessible and is the fit right, or is it a bit off?
2. Is the tablet secure, will it fall out?
3. How much bulk does the case add?
Thanks, my vega should be coming in a few days, does it come with a case or sleeve already, I don't want to pre order something unnecessary.
Cheers everyone!
Sent from my X10i using XDA App
tomh235 said:
I have been looking at this and similar cases on ebay but want to know a few things first.
1. Is the case specifically for the vega or is it generic eg, are ports accessible and is the fit right, or is it a bit off?
2. Is the tablet secure, will it fall out?
3. How much bulk does the case add?
Thanks, my vega should be coming in a few days, does it come with a case or sleeve already, I don't want to pre order something unnecessary.
Cheers everyone!
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Nope, no case or sleeve Inc.
I bought one from ebay. It's item number 320710547405 and the 'title' is "Foldable leather Case Fits 10.1" Advent Vega Tablet -UK." It came with a free screen protector but I haven't really used it since the case protects it so well.
I was really impressed with the case because it's quite sturdy and the foldable bit at the back (see photos on the item description) is really handy. Also, all the cables, etc. fit in very nicely. Overall, it was a real bargain, especially considering the ones at PC World were majorly overpriced.
Good luck and enjoy your Vega!
Ooops....forgot to say that it does add a bit of bulk to the tablet but to be honest, the tablet had a few close calls before I got the case that I was grateful for the extra 'bulk.' It's not a major amount of bulk though!
original_ganjaman said:
The best case to meet your 2 criteria would be the official folio case. It offers the protection you require, only problem is it is not the cheapest case. But in the end you get what you pay for. Totally happy with mine, keep the vega in it all the time.
Click to expand...
Click to collapse
I have the official advent vega folio case and it does not come with a hard front-screen which was part of the criteria mentioned...
I'm still looking for a portraid folio case with a protective screen cover, so that I can also pop the vega into my attachet folder, hope you find what you are looking for
loui1986 said:
I have the official advent vega folio case and it does not come with a hard front-screen which was part of the criteria mentioned...
I'm still looking for a portraid folio case with a protective screen cover, so that I can also pop the vega into my attachet folder, hope you find what you are looking for
Click to expand...
Click to collapse
When did you buy your case bud? I got mine in around February when I got my vega and mine has definately got a hard front cover (It lives permanently in its folio case in my rucksack and when I take it out from time to time its still like brand new)
I will make a short video of it at lunch time when the office is quieter lol
http://www.amazon.co.uk/dp/B005HI4FPG
does anyone have this case? from what I can tell, the tab goes one side, the keyboard dock the other and it's a hard shell carry case.
however, nowhere to put your cables.
does anyone know of a similar case to this but with an pouch as well for cables? I know it's a TF101 case, b ut considering the prime is a small item it will fit this case easy.
I am looking at this case as well as I read about the reviews on the office transleeve having all the problems with the tablet and the lack of availability online. From the pictures on amazon it seems that its quite thin to carry around. I read a review somewhere maybe from it official website saying that this can carry a dock with the transformer so i assume this is okay.
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
js931 said:
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
Click to expand...
Click to collapse
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
air-wave said:
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
Click to expand...
Click to collapse
of course its thicker, its not a neoprene sleeve. but thats why it protects well and you can still easily carry it with one hand! i really like it. didnt expect much for the price and was pleasantly surprised!
i also ordered a 10'' netbook case from case logic to compare, but the prime has too much room in it and its more of a thin neoprene, so its just scratch-protection...
I bought this hard case:
eBay - The UK's Online Marketplace
Internal dimensions now that I have it in my hand are:
Case: 26.8cm x 19.1cm x 3-4cm
Prime: 26.3cm x 18.1cm x 2cm
As you can see, it's a pretty close fit in theory. Have to wait 5 days before I get my Prime to confirm it's a good fit.
Alternatives to consider
Hey guys,
just like everyone else, looking for a proper case for my prime
since eventually (in the near future) I plan on getting the Dock, i'm looking for a case/sleeve
- looked at all the cased and couldn't find one I liked
- Finally found a case, but haven't had a chance to try it yet
it's the HP VX403AA / VX404AA it's a mini neoprene sleeve for the HP Mini netbook
- price is 32$ as low as I could find it. pricey but nice
- Has 2 smaller pockets on one side and a big one on the other side
- Plenty of storage to keep the charging cable/charger/micro USB with the tablet wherever you go.
- I'll let you know how it fits as soon as I try it, you can find it in local BestBuy's so if any1 is interested in trying it out before I get to it, by all means post your results.
Thank you,
Rodi
lancer3397 said:
however, nowhere to put your cables.
Click to expand...
Click to collapse
It looks like there is a pocket on the inside of the cover.
I ordered this iGadgitz case. Hope to get it next week. I will post some pictures when I have it.
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
UrbanDroid said:
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
Click to expand...
Click to collapse
Could you post a link?
This is a great case, my prime and dock lives in it when I'm not using it. It fits snug and feels well protected. There is a mesh Pocket inside which I justuse to keep the screen cloth, but you could easily fit a USB cable in.
Sent from my Transformer Prime TF201 using Tapatalk
I'm looking for a good sleeve/pouch style case for my tab 7.7.
I want it to protect it from scratches and maybe for "short" drops.
I have this one http://www.amazon.co.uk/SAMSUNG-GAL...ED8E/ref=sr_1_6?ie=UTF8&qid=1330242173&sr=8-6 , it serves the purpose but is too ugly for my taste
http://www.amazon.co.uk/HORIZONTAL-...RIOR-ACCESSORIES/dp/B005VAEDIY/ref=pd_cp_ce_1
I've got this one while I wait for my book cover style case from China / Hong Kong
Did you get it? Is it any good?
Sent from my GT-P6800 using XDA App
Yes, I received it on Saturday and it was a quick delivery as well. It's originally designed for the BlackBerry playbook and slightly smaller in dimensions in comparison to the 7.7
Some photos soon perhaps...
Another option is PDAIR, they also have pouch type case :
http://www.pdair.com/catalog/product_info.php?cPath=11000659_11001131_11001398&products_id=35043
IIRC, their case got some positive reviews before
Here are some photos attached to this post
I ordered a Noreve case for my 7.7, to hold me off while I wait, I picked up a Blackberry Playbook Zip sleeve. It was on clearance at a local store, got it for $10 vs the $40 it originally sold for!
It fits as if it was custom made for the 7.7, it's an absolutely perfect fit and nice quality! Getting this for $10 almost makes me feel like I wasted $100 over at Noreve, lol.
http://crackberry.com/blackberry-playbook-zip-sleeve
Ive already got this one and it works pretty good. I originally got it for a HTC EVO View, but it works good for my 7.7. I also just ordered this, only $7.45 shipped and the embroidered "Galaxy Tab" logo looks great. It also has a pull tab that lifts the tablet out of the sleeve. I know it will fit with no case on, but Im hoping it will fit with a snap on case I ordered from Brando. Probably wont, but Ill still use it.
PSA: The black Tab sleeve (ET-GTABBSSGSTA) doesn't fit the 7.7. Not wide enough.
QwaarJet said:
PSA: The black Tab sleeve (ET-GTABBSSGSTA) doesn't fit the 7.7. Not wide enough.
Click to expand...
Click to collapse
I can confirm this. I wrote a short Amazon review so other 7.7 owners will know.
I went for the BlackBerry PlayBook case too - Only £7.50 delivered from Amazon UK.
It is a perfect fit and is made of memory foam. Quality.
Ahhg - it's only £4.41 now! Still - it was good value at £7.50.
Black, Grey, Orange or Sky Blue
Not sure if it's the exact one, there's no label on it and I've thrown away the packaging. But, using a Belkin Kindle case works well for me.
http://www.amazon.co.uk/Belkin-Neop...?s=electronics&ie=UTF8&qid=1331722112&sr=1-10
I've also got the Samsung book case, which fits nicely into the Belkin case for some extra protection when it's in my bag.
I got the blackberry one as well today. Is quite nice
Sent from my GT-P6800 using XDA
Nook Color/Tablet sleeves work as well. So you can add those to the list. Accessories are pretty scarce at the moment so I'm reusing my Nook sleeve until my case arrives in the mail.
This is the one I'm using:
http://www.barnesandnoble.com/p/neoprene-sleeve-in-night/18308963
stetar said:
Not sure if it's the exact one, there's no label on it and I've thrown away the packaging. But, using a Belkin Kindle case works well for me.
http://www.amazon.co.uk/Belkin-Neop...?s=electronics&ie=UTF8&qid=1331722112&sr=1-10
I've also got the Samsung book case, which fits nicely into the Belkin case for some extra protection when it's in my bag.
Click to expand...
Click to collapse
Is the Belkin case you're talking about actually for the Kindle Keyboard (3rd generation)? I have a sleeve for my kindle 3 and while I can slide the tab in, the top sticks out a bit. I should see if I can find my old kindle 2 case.
teiglin said:
Is the Belkin case you're talking about actually for the Kindle Keyboard (3rd generation)? I have a sleeve for my kindle 3 and while I can slide the tab in, the top sticks out a bit. I should see if I can find my old kindle 2 case.
Click to expand...
Click to collapse
Well to be honest I know nothing about kindles so no idea which is which. The cover I have is pretty much the exact size of the Tab, it fits perfectly.
Actually, just found it on a local Aussie site. It's this one: http://www.bigw.com.au/electronics/...78149/belkin-grip-vue-sleeve-for-kindle-black
Gam3r 4 Life said:
Ive already got this one and it works pretty good. I originally got it for a HTC EVO View, but it works good for my 7.7. I also just ordered this, only $7.45 shipped and the embroidered "Galaxy Tab" logo looks great. It also has a pull tab that lifts the tablet out of the sleeve. I know it will fit with no case on, but Im hoping it will fit with a snap on case I ordered from Brando. Probably wont, but Ill still use it.
Click to expand...
Click to collapse
Thanks for this post. EVO view case fits perfectly
Not to resurrect a somewhat dead n' buried thread, but I'm on the hunt for a sleeve to protect my 7.7 while keeping the OEM bookstyle case always equipped on it.
I'm utterly disappointed at the lack of sleeves specifically designed for this tablet considering its made by Samsung, a top tier mobile computing company. Kind of reminds me why my next PC build will be Intel and not AMD, less third party vendor support - simply better chipsets and mobos. Maybe we should all get Ipads just to get some proper accessory support?
I'm kidding, but suggestions are appreciated. I even checked out amazon uk and can't find anything decent. I'm not too crazy about using a playbook branded sleeve either.
http://www.ebay.co.uk/itm/Brand-New...ccessories&hash=item231876b2b0#ht_5251wt_1031
I am currently using this one，pretty good nice. works fine，shipping very fast
Just an FYI, the Blackberry Playbook Leather Sleeve, also works well with the Tab 7.7.
Im starting to wonder if I'm terribly unlucky or just plain doomed here.
I've so far bought a Mitab folio case which while managing to hold the tablet reasonably is clearly overstressing the docking aspect and doing damage to the tablet when I try and dock it. Without both parts in the case the tablet cover has the appearance/feel of an illfitting old book.
I then got a random folio case off ebay, allegedly a Moko Multi Angle Case and its terrible, it doesnt fit right and you cant use the camera.
I was then going to just get the ASUS Transleeve but apparently it scractches the back of the tablet and its hinge/connecting mechanism is made of fail.
So I ask you, XDA, which (if any) case is decent enough for the Prime?
Ideally I wanted something that I can dock while using, but thats seemingly out of the question, so I just want a nice case that doubles as a stand and doesn't look terrible.
Suggestions please (pref with Amazon UK links!) Would a "genuine" a Moko Multi Angle Case be the way to go, or perhaps the "premoium MoKo Case?
Cheers!
I am more than happy with my 2 UK cases.
http://forum.xda-developers.com/showthread.php?p=22978731
I got this one and love it. Inside suede is black not grey and it fits really tight and snug and doesn't fall over when standing.
GreatShield on Amazon
I bought a Targus - Truss Leather Case/Stand. Just bought it because it was at Best Buy when I bought my tablet. Figured I'd use it for protection until I found a better/cheaper one, and then return it. I have read most threads on here about cases an also looked elsewhere online at cases quite a bit and have yet to see a case that I liked as well, much less better. I payed $40 US for it, though I'm sure it can be found cheaper online, but I really really like the fit, function, and quality of it. I would recommend it to others without any hesitation.
Sent from my PG86100 using xda premium
Check for Tuff-Luv cases. They're getting good reviews for other devices. Mine is on his way to my homeplace in Canada! Will post a review when I get it.
Sent from my Transformer Prime TF201 using xda premium
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1561657
Master Mace said:
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1561657
Click to expand...
Click to collapse
Thanks for the link, it lead me to this:
http://www.hzhkkj.com/product_show.asp?pid=1577&bigid=2&smallId=785
Looks Great!!!
**Edit**
On second thought, I think I might go with the quality...
http://www.noreve.com/langue/en/pro...ormer_Prime_TF201_Tradition_leather_case.html
The greatsheild cases are by a mile the best case arround, slim and they look good too.
Dont consider anything else.
I keep mine on when docked and just put the flap under the dock.
You can find them on ebay from china and cost about 13 squid delivered, the only prob is waiting for delivery. But its not that long.
Hi Ady,
I have the premium Moko case you linked to.
My review is up on Amazon for this case too
I really like it, the Primes fits into the case perfectly, all the ports are accessible with the case on, as is the camera and flash.
I'll get some photos taken so you can see the fit.
Are there any good folding stand cases with access to the charging port while the thing is closed?
I found this Moko Premium folio one, which does look great as nitram says, other than it being folio rather than folding type:
amazon (dot) com/MoKo-Slim-Fit-Multi-Angle-Transformer-10-1-Inch/dp/B0063Q3G3I/ref=sr_1_2?s=pc&ie=UTF8&qid=1332907452&sr=1-2
But as I said, I'm looking for more of one these folding types like, but neither of them show if there is a hole for the charging port while they are closed:
amazon (dot) com/MoKo-Folding-Transformer-10-1-Inch-Android/dp/B00565T3ZW/ref=sr_1_17?s=pc&ie=UTF8&qid=1332909457&sr=1-17
OR
amazon (dot) com/Transformer-Prime-UrbanFlip-Series-Viewing/dp/B006WU9YMW/ref=sr_1_38?s=pc&ie=UTF8&qid=1332909089&sr=1-38
Does anyone have them and can say or show if they have the port hole?
Hmm, interesting point there Alex.
Using the case as a stand (the Moko premium) the charging point is not accessible.
However, if you take the Prime out and put it in upside down then the charging point is at the top and thus accessible.
If I use the case with the front part of the case folded right back, then the charging point is fully accessible, but..... you have to unplug it, folde the case back, then plug it in again.