Related
Hello friends.
One of my friends flashed blayo Rom ( froyo 2.2) on my suggestion but now his phone won't boot until charger is plugged in with power on..
He stays in different city.. hence I can't Post logcat.. if anyone has solved this already it will be helpful.
Thanks and regards..
Sent from my HTC HD2 using XDA App
the battery is dead ?
The Battery is very ok...
~I think you will find the power button has died,mine would only turn on with the power lead untill i replaced the power button
bonesy said:
~I think you will find the power button has died,mine would only turn on with the power lead untill i replaced the power button
Click to expand...
Click to collapse
Even this is not the case..the phone is going into boot loop when switched on without power plugged in....
Sent from my HTC HD2 using XDA App
Try wiping all again via recovery ( you should be able to hold volume down then plug in) and reflash?
bonesy said:
Try wiping all again via recovery ( you should be able to hold volume down then plug in) and reflash?
Click to expand...
Click to collapse
Thanks For the suggestion dude .. tried all that .. even made my own custom rom and sent it to my friend for flashing.. All works perfectly except.it going in boot loop when charging is not plugged in.. i seriously doubt something might be wrong with rooting and the recovery flashed there .. I have to wait for him (My friend who has legend)..to get back only then can i try other things ..
This Phone is also not detected when connceted via USB in bootloader mode ,..makes doing stuff very difficult.. If no one faced this problem before i guess i will revert to stock and re root..
I have had this problem since CM7 no fix found asked everywhere and there isn't anyway to get a logcat I know I have tried time and time again.
However get him to try CM6.1 never had a problem with booting on it still don't (Just flashed again today because I was stuck for 7 hrs today without a charger) http://wiki.cyanogenmod.com/wiki/Latest_Version gapps is at the bottom
Ohh many thanks for reply I guess once this booting problem with charger plugged in is solved ..on CM 6.1.. I will cook him my own rom..
Thanks ..
Sent from my Schubert using Board Express
Bump.. ever have any luck solving this problem? I have been trying to find an answer to the same question for weeks now. No amount of changing ROM's or wiping has solved it. Exact same problem different phone (mytouch 3g slide) but I can't help but feel the fix would be identical.
I have been digging for a couple of months and it appears to be a HBOOT 43 issue both alpha rev & 1.1 seem to fix but i'm happy on CM6.1
Sent from my Legend using xda premium
Okay i just got my new S2 today from AT&T and i know it just released today but i wanted to try and see if i could put a new rom and CWM on and it worked, for awhile.. then when i was in CWM i pressed wipe data/factory reset by accident and now im stuck on the screen with the top hat and an arrow going in a loop. I was on the screen for about 10 mins then i pulled the batt out to see if it would do anything but no when it boots back up it goes right back to the top hat.
So yeah.. Is it gone or what? or is there anyway to fix this?
I looked up some options and they say to use ODIN but what files (PDA, CSC, and PHONE) should i use?
EDIT:
Okay so i guess the top hat thing is the background image...
But im still stuck in the CWM i can scroll with my VOL + and - but when i press my power button to "select" the menu just disappears, as in it just goes blank and only the top hat shows.
sorry if the way im explaining it is confusing but im just so frustrated. If you would like me to post up a vid or pics of what i mean just ask please.
I have never used CWM recovery using the power button as select.. The ones I've used so far, it is actually a back button.....
Not sure which rom u r on either but since the international ones have a home button and urs don't.... maybe CWM recovery hasn't catered for your case yet, have you tried the softkey home button to select?
btw, how did you wipe data by accident? it actually requires to press the wrong button combination of at least 4 presses to do that?
s2d4 said:
btw, how did you wipe data by accident? it actually requires to press the wrong button combination of at least 4 presses to do that?
Click to expand...
Click to collapse
Well me pressing the wipe data button isn't the situation now. When i first pressed it i thought it was running on its own when i saw the top hat and the arrow loop. But then i just figured it was the CWM Background. So my main problem is just that i cant select anything with my power button.
Also i tried pressing the home to select but it just kind of "refreshes" the page.
But as of right now.. i know its something stupid to do because it not my carrier but i grab some files from http://forum.xda-developers.com/showthread.php?t=1113928 and i used the first link on the page and i flashed it with ODIN so not im out of the CWM but now my phone is just looping at the animation of the GALAXY S II.
Select = HOME BUTTON
Power = go back
Volume up / down = navigate menu up / down
Just find a flashable .zip ROM of your choice (suitable for your phone model) and copy to sdcard.
Use CWM Recovery to rectory reset, wipe cache, and dalvik .navigate to install zip from sdcard, reboot when done.
Sent from my GT-I9100 using xda premium
ok so now i got my phone working on lite'ning but now i cant call and its most likely becuhz i chose those random files. Is there a way to fix this now?
phetsamone said:
Well me pressing the wipe data button isn't the situation now. When i first pressed it i thought it was running on its own when i saw the top hat and the arrow loop. But then i just figured it was the CWM Background. So my main problem is just that i cant select anything with my power button.
Also i tried pressing the home to select but it just kind of "refreshes" the page.
But as of right now.. i know its something stupid to do because it not my carrier but i grab some files from http://forum.xda-developers.com/showthread.php?t=1113928 and i used the first link on the page and i flashed it with ODIN so not im out of the CWM but now my phone is just looping at the animation of the GALAXY S II.
Click to expand...
Click to collapse
Sounds like you are just stuck in a boot loop. Check out the "Got a Bootloop?" thread. As long as you can get into recovery, you should be okay.
phetsamone said:
ok so now i got my phone working on lite'ning but now i cant call and its most likely becuhz i chose those random files. Is there a way to fix this now?
Click to expand...
Click to collapse
Please explain further "can't call",.......no signal?
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Please explain further "can't call",.......no signal?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
okay. from looking at the top i have full bars but when i try to call someone
for example i tried to call my dad and when i press call a prompt pops up saying "call not sent."
and FYI i am AT&T
and i just checked *#*#1234#*#*
and i have PDA:I9100XXKH3 PHONE:I9100XXKH3 and also for CSC:I9100OXAKH3
And it worked before you flashed?
Edit: Are you calling number from Contacts or manually entering on keypad?
Sent from my GT-I9100 using xda premium
UpInTheAir said:
And it worked before you flashed?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
yes it worked before flash.
okay i looked around the forum and now i see there is AT&T sub forum for the s2 http://forum.xda-developers.com/forumdisplay.php?f=1301
and i downloaded this pit file http://forum.xda-developers.com/showthread.php?p=18060878 so now i can receive calls but i still cant send and i cant hear the audio when someone speaks
EDIT: i think im just going to look around that sub forum because i think it would be easier to actually get help from people with the same type of s2 (and i didnt know there was a forum made for ATT sorry for the mix up)
THANKS FOR EVERYONE'S HELP! AND THANKS FOR ACTUALLY REPLY TO THIS!
As your phone its not bricked, and you have ongoing issues, better post this question there (your model specific) and lock this post.
Designgears (Cognition ROM) tweeted that he just received his and currently in process of cooking the ROM. I'm sure other Devs won't be far behind either.
Sent from my GT-I9100 using xda premium
Dear all
Hi
Two days ago i connect my mozart in the zune. It was asking for update (latest release). I done the update from zune. It was installed succesfully, then zune restart my mozart and it never start again. It showing only the HTC logo and it vibrates 7-8 times. nothing else.
I can not used bootloading menu (no USB) because i already bricked my mozart..
Any ideas?
I beleive i can not do anything for the moment!!!!!!
Hello.
Have you try a simple Hard Reset?
I do it after a "7740 cab update failed" and it worked.
But don't know with a zune update.
Yes. but still its not working.
thanks
shutdown phone
press hold + volumn and - volumn then press power
your phone will to go page
"This operation will 1.delete all your personal data...."
press - volumn to restore manufacturer default
Yes. but still its not working.
thanks
savvasn said:
Yes. but still its not working.
thanks
Click to expand...
Click to collapse
it's still not working because OS is not complete.
One way solution is find fix store with have jtac to flash new bootloader in your phone again.
mozart
cyclonemon said:
it's still not working because OS is not complete.
One way solution is find fix store with have jtac to flash new bootloader in your phone again.
Click to expand...
Click to collapse
i have done all with riff box but not succsess ,i thing there is any hardware problem ?
hemmobile said:
i have done all with riff box but not succsess ,i thing there is any hardware problem ?
Click to expand...
Click to collapse
I have the same problem, have you fixed your mozart? Can you tell me how or where to go to find solution? Please
Hey there, I have the exactly same problem at one of my phones.
Is there no help? I hope there is.
I have two HTC 7 Mozarts at home, the one with a broken display and the one with the broken whatever (vibrates 7-8 times, too).
So today I swapped the display from the one with the broken rom (I guess) to the other one and:
a) it worked!
b) I saw the SD card slot!
So my question is: can't you do anything with the sd card against that problem?
It would be nice if we could!
Greetings!
htc 7 mozart vibrates 7 times
savvasn said:
Dear all
Hi
Two days ago i connect my mozart in the zune. It was asking for update (latest release). I done the update from zune. It was installed succesfully, then zune restart my mozart and it never start again. It showing only the HTC logo and it vibrates 7-8 times. nothing else.
I can not used bootloading menu (no USB) because i already bricked my mozart..
Any ideas?
I beleive i can not do anything for the moment!!!!!!
Click to expand...
Click to collapse
i am too having the same problem but luckly it gt started 2 times...bt goes down again once when i opend the camera and 2nd time when i connect to wifi....
i can use bootloader
bt cnt flash the rom either....
have anyone found the solution...is it hardware problem or OS
please help me out with this..
thankyou
Niroj
did anyone find a solution to this? my mozart just decided to other day to do this,
Ive installed different bootloader and a custom rom, still stuck
Soo frustrating
cheers,
Cam
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
jackpf said:
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
Click to expand...
Click to collapse
Well I'm using jelly blast no problem... I'm guessing you're using 3.0.5 (latest) did you first flash 3.0.4? If not i suggest going back to stock then 3.0.4 then .5
You might of had some random conflict if you flashed from another custom ROM to Jelly Blast
Also what do you mean radio?
The app? That's included in Jelly Blast, well it is in 3.0.4 (that's what I'm using)
Oh and apparently I'm now meant to tell people to ask questions and stuff in the sticky thread (The one by "iamareebjamal"), or post this in the jelly blast thread to help keep the general section free from spam
The usual Xx James xX only on mobile (XDA Premium)
I think you've lost your IMEI (don't worry it's not lost, this rom somehow can't read your IMEI number). Please check your IMEI number by using *#06# on call screen.
If you can't see your IMEI number, install GalaxyToolbox and check the IMEI from there. If you can see the IMEI from GalaxyToolbox, it means IMEI is still there but rom can't read it.
Please install any other rom. (you can/should backup your IMEI by using GalaxyToolbox before doing anyting on your system)
jelly blast no service fix
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
stuck on boot animation :'(
man wtf stuck on samsung logo only!!:crying:
sam_shah said:
man wtf stuck on bootanimation only!!:crying:
Click to expand...
Click to collapse
Flash stock rom via odin
sam_shah said:
man wtf stuck on samsung logo only!!:crying:
Click to expand...
Click to collapse
What version of the jellyblast rom are you running? Try downgrading the version before the one you are using and repete the steps (do it all at once) try this and post the results
unbricked...and rooted even but not able to install any new ROMs
When i install any new ROMs by CWR then only samsung logo apears with my phone model number..waited for 30 mins no action then back to stock !! Familliar to Rooting nd ROMs in HTC phones.. but wishing to learn for Samsung SGH-s5830i (ace)
Bricked my phone. Need help now
guppysir said:
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
Click to expand...
Click to collapse
Thanks for bricking my phone.....
it doesn't work my phone can't go into CMW or boot now i would be extremely grateful for some help please.
@jrtbing, lets dig some graveyard mate, shall we First of all jellyBlast was band from XDA ages ago ( not to be mention there are far more sophisticated stable Rom @ Dev sub forum)
As for your problem goes, please remove your battery for ~1 Minute ( don't make any difference though, just for discharging purposes ).
put it back and try press and hold the Volume Up + Home keys and then long press the Power key till the start up screen with “Samsung Galaxy Ace GT-S5830i″ logo blinks for two times and you see your desired recovery screen.
If the combo keys provided don't be effective ( due to possible boot loop, corruption of your partitions; kernel ,,etc,,etc,,) we need to check your download mode by pushing (Volume(+) + Volume(-) + Power) simultaneously ,, still no use,, You probably hard-bricked your device mate. USB jig might be your last solution to force your device get into Download mode, nothing will be guaranteed though.
Hello guys.
Unfortunately my galaxy s3 cannot turn on. My phone started to freeze all the time and I got a message when i turned on that i have to wipe data because my cell phone can become unstable. Below the message it was a key which said "I am feeling lucky" :/ I tried to boot to recovery with the standard way of Home + volume + power and Android logo came on the screen like the way when I updated the firmware. When it stuck after 10 mins I turned it off and now the only thing I can see is a white screen with grey lines. nothing more nothing less.
I cannot do anything via toolkit because it cannot find the mobile...
Please help!!!!!!
hello my friend. can you boot in rocovery mod or download mod?
no
unfortunately no :/
chris21rod21 said:
hello my friend. can you boot in rocovery mod or download mod?
Click to expand...
Click to collapse
panais86 said:
Hello guys.
Unfortunately my galaxy s3 cannot turn on. My phone started to freeze all the time and I got a message when i turned on that i have to wipe data because my cell phone can become unstable. Below the message it was a key which said "I am feeling lucky" :/
>>>>TROJAN .
Charge battery .
Boot to download mode flash stock rom .
Based on your previous posts you may well have a brick.
jje
jje
Click to expand...
Click to collapse
if i plug it on the wall the same thing happens. White screen with grey lines (zig zag like a zip). What do you mean if i have a brick? Can I fix it? Thanks for your help
JJEgan said:
panais86 said:
Hello guys.
Unfortunately my galaxy s3 cannot turn on. My phone started to freeze all the time and I got a message when i turned on that i have to wipe data because my cell phone can become unstable. Below the message it was a key which said "I am feeling lucky" :/
>>>>TROJAN .
Charge battery .
Boot to download mode flash stock rom .
Based on your previous posts you may well have a brick.
jje
jje
Click to expand...
Click to collapse
Click to expand...
Click to collapse
finally i managed to boot to download mode. i open odin to flash the stock firmware but i got a message which says that the galaxy has no pit partition
chris21rod21 said:
hello my friend. can you boot in rocovery mod or download mod?
Click to expand...
Click to collapse
R: galaxy s3 cannot turn on!!!!
Wow "i am feelin lucky" hackers are getting a sense of humor...
U shouldve understood immediatly it was a virus...if it cant find something its probably cause the virus flashed stuff on your phone. Try searching the internet for this sort of phone infection youre likely to find the "fix" immediatly..
Sent from my GT-I9300 using xda app-developers app
Read this one
http://forum.xda-developers.com/showthread.php?t=1796062
Low ship I9300 firmware for flashing with PIT. (three files firmware)
jje
re-partition failed!!
i tried to flash a pit file last night and i got a message 're-partition failed'. anyone has a clue what to do next?
Guessing you need to replace the motherboard...
Sent from my GT-I9300 using xda app-developers app
if the last firmware which was installed was the stock firmware and unrooted (i have reset the counter on the download rom) it can be replaced over the warranty?
riecardow93 said:
Guessing you need to replace the motherboard...
Click to expand...
Click to collapse
samsung galaxy s3 white screen with grey lines
panais86 said:
Hello guys.
Unfortunately my galaxy s3 cannot turn on. My phone started to freeze all the time and I got a message when i turned on that i have to wipe data because my cell phone can become unstable. Below the message it was a key which said "I am feeling lucky" :/ I tried to boot to recovery with the standard way of Home + volume + power and Android logo came on the screen like the way when I updated the firmware. When it stuck after 10 mins I turned it off and now the only thing I can see is a white screen with grey lines. nothing more nothing less.
I cannot do anything via toolkit because it cannot find the mobile...
Please help!!!!!!
Click to expand...
Click to collapse
I am facing the same problem please help me with the solution if anyone have
kailashsoni said:
I am facing the same problem please help me with the solution if anyone have
Click to expand...
Click to collapse
read the thread, solution has been given
my samsung not working
Glebun said:
read the thread, solution has been given
Click to expand...
Click to collapse
As you mentioned i could not find the solution .
Please reply me with the solution i would be thankful to you.
kailashsoni said:
As you mentioned i could not find the solution .
Please reply me with the solution i would be thankful to you.
Click to expand...
Click to collapse
Take to a service centre .
Replace motherboard .
jje