Hi All,
All the features are incorporated in the MiniCM6 v 1.0.1 found here
Hit Thanks if you like my post
facing too much reboot after this update check for bugs
thnx
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
check wifi folder it may be the problem
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
abhi98228 said:
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
Click to expand...
Click to collapse
Works very well for me your fixed version.Thank you !
Since installing this my battery life has literally more than doubled so for that alone you have my thanks, wouldn't of installed the seperate modules but you have made it easy, good work
Sent from my X10mini using XDA App
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
nice nice only why undervolt AND overclock the overclock module is already undervolted
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
nice nice only why undervolt AND overclock the overclock module is already undervolted
Nice work, that was my first idea with tweaks, but... i dont have a mini so i cannot test...
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
the overclock module is not included in this.
overclock applied through hw_config.sh
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
again... borrowed from D4rKn3sSyS...thanks to him
mfas said:
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
Click to expand...
Click to collapse
not sure y its happening... one of my friend is also facing problem with v1
use abhi's or v2 .zip and let me know if it works for you.
will do some more experiments and update if required
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Xaeons said:
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Click to expand...
Click to collapse
1. UV- battery life increases
2. MDDI lag... its hardly noticable
3. MT- download multi touch visualizer from market and test it
4. OC- install set cpu and check the max n min freq...
Thanks satchith, I'll test it on the ff days..
Though when I tried Quadrant Advanced, back then my average was between 900-1000, now its 1100-1200..
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
mitsos16x said:
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
Click to expand...
Click to collapse
Thanks for ur feedback, brightness issue fixed. Please test and let me know
Hello!
This Files Works On Stock SE ROM?
dark_zhero said:
This Files Works On Stock SE ROM?
Click to expand...
Click to collapse
HTML:
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
Works well
Is ther ny update in MDDI or Undervolt????
Related
So which rom 4 mini pro drains least battery?
akso any music player that has equalizer and does not eats the sh** otut of your battery?
something simmilar to astro playa
Ibelieve its the sotck one.
Anyone knows what could be done to he Stock ROM to increase even more the battery life?
1.6 or 2.1?
Undervolt, underlock (meaning CPU clock below 600MHz) and yeah
s0ftcorn said:
Undervolt, underlock (meaning CPU clock below 600MHz) and yeah
Click to expand...
Click to collapse
how do i undervolt?
axy_david said:
how do i undervolt?
Click to expand...
Click to collapse
Can only do if you have a custom ROM
Settings -> CyanogenMod -> Performance -> CPU -> tick Undervolt Box, Restart
Dan53 said:
Can only do if you have a custom ROM
Settings -> CyanogenMod -> Performance -> CPU -> tick Undervolt Box, Restart
Click to expand...
Click to collapse
FAILED i have
anyway does it will then drain less battery than the stock one?
for more battery life on stock rom
you have to undervolt with a module (here in our devi forum's)
and the latest battery drain fix (is in our devi forum's,too)
for a noob my advice is:
use the how confing editor (devi forum^^)
because you have to mod your how confing
and you need ABD or a filemanager to copy you modules to the right folder
after that you have about 40% more battery life^^
if anyone want, i can make a zip file to flash throw xrecovery
flex96 said:
for more battery life on stock rom
you have to undervolt with a module (here in our devi forum's)
and the latest battery drain fix (is in our devi forum's,too)
for a noob my advice is:
use the how confing editor (devi forum^^)
because you have to mod your how confing
and you need ABD or a filemanager to copy you modules to the right folder
after that you have about 40% more battery life^^
if anyone want, i can make a zip file to flash throw xrecovery
Click to expand...
Click to collapse
First of all improve your english. Throw and through are completely different things, but its funny anyways
Would be btw awesome if you would make a zip thats flashable through xrec or even better with cwm =)
axy_david said:
FAILED i have
anyway does it will then drain less battery than the stock one?
Click to expand...
Click to collapse
oh yeah, you will need the undervolt module first, forgot about that.
stock drains less, unless you undervolt
damn
i already installed custom mod x(
anyway thinking about darksyss rom
guess i will thest this uv thing 1-st
well you can get stock back, using SEUS
but of course custom is better
s0ftcorn said:
First of all improve your english. Throw and through are completely different things, but its funny anyways
Would be btw awesome if you would make a zip thats flashable through xrec or even better with cwm =)
Click to expand...
Click to collapse
don't **** around
I don't have time for **** like
and yeeaaah i would make an update zip wich is flashable trough xrecovery AND CWM
all right^^
I'M BACK
here are my files
rename it to update zip and flash
FOR XRECOVERY:
KLICK
FOR CWM:
KLICK
you need the last Baseband and FW 2.1.1.A.0.6
make a Battery Wipe AFTER you flashed this file
it would add a battery drain fix
undervolt and Dualtouch
Credits go to:
Dualtouch by slade87
Undevolt module and battery drain fix by D4rKn3sSyS
THANKS!!!
ty this was really useful
but i have honeycomb now
but who knows?
anyway saved on my pc
I doubt that you have honeycomb max gigglebread
Sent from my awesome x10 mini pro (with Cyanogen Froyo CM6 v5.0 by slade87)
axy_david said:
ty this was really useful
but i have honeycomb now
but who knows?
anyway saved on my pc
Click to expand...
Click to collapse
You have froyocomb, not honeycomb. It's a difference. Froyo = smartphones; Honeycomb = tablets
And im awaiting ICS (Ice Cream Sandwich)... Hmm, wonder if ICS have been released yet.....
Unlocking Bootloader voids your warranty however you can relock the bootloader!!! Please think about what you do before reading on
Great kudos to the_laser, his original thread is here : http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
Requirements:
at least Froyo or Gingerbread Android
unlocked BootLoader
same Baseband as for any custom rom
Instructions:
How to Lock and Unlock the Bootloader : Thread by Spyder-X with Instructions
Please make sure to delete the following modules if present in /system/lib/modules/ this is really important otherwise phone might reboot due to unloading adresses have changed : delete x8oc.ko, x8uv.ko, cyctma300_ser.ko, x8mddi.ko, ext3/4.ko jbd(2).ko or mt.ko
except OC everything is already in Kernel, please do not try to insmod current x8oc/uv module needs to be recompiled with new addresses
unpack the Kernel zip and place ftf file in firmware folder of flashtool
select flash and choose ZombiePanic
flash like usual
Features
no touchbug with GB roms
Tun/Tap
Overclocking (and undervolted)
built in Multitouch
mddi patched!
netfilter
iptables/xtables
ASHMEM/PMEM/SHMEM
EXT3/4 JBD(2)
USB RNDIS/RMNET (one step closer to native USB Tethering)
partial USB Host Side (not yet fully working)
alot more filesystems supported (CIFS,CD_ROM ISO,etc.)
few performance tweaks on performance govenor, smartass would be nicer maybe next time after i get permission
Bugs
none known so far
Download
Again you do this at your own risk!
Download ZombiePanic Kernel v1.63
At the Moment I advise to not use Overclocking as I still need to patch some PLL values which means OC maybe slower than set to 600 MHz
Download Zombie Panic Extreme Edition
Warning: Do not use if you are a regular user, its for hardcore overclockers. Zombie Panic Extreme Overclocking Edition be careful with Overclocking!
Features:
- upto 864 MHz with patched PLL
- features (and maybe bugs) from ZPKernel v1.61 integrated .
might be unstable with higher frequencies!! be careful do not set cpu speed on boot while checking frequencies
I am not responsible for bricked devices. Do at your own risk.
Download Zombie Panic Extreme Overclocking Edition
Code:
v1.63
-worked on overall snappiness, system should react faster overall
v1.62
-for me stable again. sorry about reboots it was caused by "fixed" touchdriver, i have rewritten some part and now its fine again! (also running super user v3 without issues so far)
v1.61
-found the issue on stability/performance loss (in acpuclock.c)
v1.59
-improved stability (a nat settings was causing a few issues)
-performance in booting might be a bit better
v1.58
-fixed swiping issue in touchdriver from the right or the bottom while finger was "outside" the screen
v1.57
was a debugging version not released to public in order to rewrite most part of dual touch driver
v1.56
-sorry it was late, i forgot to revert two lines in camera now everything working again like it should fixed v1.54/v1.55 camera issue.
v1.55
-fixed video cam driver from v1.54
v1.54
-some clean up
-improved touchscreen driver a bit
-integrated Tun/Tap
-disabled all unncessary debugging
-again a slight increase in performance and boottime
-real cpu overclock not yet finished
v1.52
-integrated smartass conservative/ondemand governors and can be selected
in cm or setcpu settings [B]full credits goto AnDyX[/B] his
original Thread is [URL="http://forum.xda-developers.com/showthread.php?t=1159899"]here[/URL]
-worked again a little on kernel ramdisk
-new boot logo [B]credits go to Mr.Krypton!! thank you very much[/B]
-enabled GPU KGSL per Process caching might improve 2d/3d performance
v1.51
-all changes from v1.4 now implemented
-partial clean up on kernel ramdisk, next step no chroot anymore
-wireless working
v1.5
-reverted link back to 1.3 wireless works here, wireless issue i'll take a look again
v1.4
-patched lightsensor now should never return illegal value -1 so no automatic brightness bug
-some what patched multitouch to be a less pain in the ass while zooming
v1.3
-full overclocking support kernel wise should also reduce jiffy lags
-new custom logo for this version ;) if anybody wants to make a better one please let me know
-included mddi fully (ESD_Recovery lag should be gone)
-included small patch for light sensor (not yet finished) to not report illegal light value -1
v1.2
-full iptables support also with DroidWall
-partial NAT support
-almost done with Overclocking in Kernel
v1.0
-inital release
credits to the_laser,zdizhu, jerpelea, Bin4ry, Blagus ,azuzu, AnDyX,Mr.Krypton and everybody else involved in unlocking the bootloader
https://github.com/slade87
This Kernel is not using FXP or other sources, i started from scratch with SE kernel 492.
no need with Kernel v1.2
Just in case anyone wants to use DroidWall which uses one xtable module as well which is netfilter owner, extrace the zip file and put on /system/lib/modules/xt_owner.ko
edit hw_config.sh in /system/etc/ at end and include this line:
insmod /system/lib/modules/xt_owner.ko
and droidwall is working like it should.
next kernel will have this also included.
Great work mate!. Im working on preroot kernel you should also include it.
Btw, can you share sources for use some things, thanks.
edit: if you want a initlogo, send me ramdisk + png, and ill send you back modded initlogo
Great work mate!!! don't want to get off topic, and sorry if i do but is there a chance to get a version for x10 mini too???
My regards,
Ribben
Nice this custom kernel have alot of featurescant wait for the governersgreat work slade87
EDIT(OFFTOPIC): slade87 and D4 you should now start so help eachother on custom kernel.this is new on our device and you two are genius so keep up the good work
Sent from my U20i using xda premium
Work together please and make a fabulous kernel for our devices.
Why not Team487 lol?
Sent from my LG-P990 using XDA App
Go to this thread for instructions on gow to unlock the bootloader on your phone and verify that your bootloader unlock was successful.
Link: http://forum.xda-developers.com/showthread.php?t=1254225
Cheers ,
SpyderX
Please x8 version.
Sent from my X8 using Tapatalk
Slade, I noticed that the included iptables has no NAT support?
D4rKn3sSyS said:
Great work mate!. Im working on preroot kernel
Click to expand...
Click to collapse
Azuzu is working on that.
Sent from my U20i using xda premium
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
darrie1 said:
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
Click to expand...
Click to collapse
Mate, you should be able to help yourself in such case, before doing that boot loader/kernel thingy :/ you also could have provided more info...
well, first steps I think::
1) if your touchscreen is only working WEIRD I guess you just have the power cable plugged in... unplug it, wait few seconds and then your touchscreen should response as usual. otherwise ref lash default se kernel...
2) if touchscreen does not work anymore... well flash default kernel and wait or build own custom kernel
darrie1 said:
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
Click to expand...
Click to collapse
Delete cyctma300_ser.ko from /system/lib/modules multitouch is in kernel module only causing issues
Sent from my U20i using xda premium
Snoopo said:
Mate, you should be able to help yourself in such case, before doing that boot loader/kernel thingy :/ you also could have provided more info...
well, first steps I think::
1) if your touchscreen is only working WEIRD I guess you just have the power cable plugged in... unplug it, wait few seconds and then your touchscreen should response as usual. otherwise ref lash default se kernel...
2) if touchscreen does not work anymore... well flash default kernel and wait or build own custom kernel
Click to expand...
Click to collapse
i dont know what you are trying to say in your first sentence but the screen didnt respond not weird so ive flashed d4kernel
but anyway thanks for reply
slade87 said:
Delete cyctma300_ser.ko from /system/lib/modules multitouch is in kernel module only causing issues
Sent from my U20i using xda premium
Click to expand...
Click to collapse
before flashing your kernel i updated with SEUS so i didnt have mt module,
i hope next version will work
slade87 OC Does not work
Eyama said:
Nice this custom kernel have alot of featurescant wait for the governersgreat work slade87
EDIT(OFFTOPIC): slade87 and D4 you should now start so help eachother on custom kernel.this is new on our device and you two are genius so keep up the good work
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Stop compairing Slade to d4rk!
terrormattie said:
Stop compairing Slade to d4rk!
Click to expand...
Click to collapse
I don't think that was eyama point---
@slade hi bro thanks given
Peace
Sent from my Xoom MZ604 using xda premium
terrormattie said:
Stop compairing Slade to d4rk!
Click to expand...
Click to collapse
As kormatoes said, he didn't mean that. I wonder how you came to this conclusion...
He just said his opinion which was Slade and D4 to cooperate.
update to kernel 1.2
slade87 Thank you. you need to refine multi-touch.
Removed....
Hello, unlocked the bootloader!
But when I connect in fastboot blue light is lit but there is nothing to me!
Am I doing something wrong?
thank you
Want to test out this kernel!
I come from x10 mini, but the mode of Flash seems to be different!
Try fastboot -i 0xfce flash boot boot.img; did you installed the fastboot driver?
Sent from my SK17i using XDA App
hi kamarush
thank you for your working
i have wifi issue so i cant connect to any wifi network so please help me and thanks alot
with my regards
abd-hamdan said:
hi kamarush
thank you for your working
i have wifi issue so i cant connect to any wifi network so please help me and thanks alot
with my regards
Click to expand...
Click to collapse
Install in cwm the wlan_smultron_signed.zip
kamarush said:
Install in cwm the wlan_smultron_signed.zip
Click to expand...
Click to collapse
i install it but no response
im not interested in custom kernel at the moment, but im curious, to those who succesfully flashed the kernel, can you overclock up to 2ghz using setcpu?
Seriously it does!
Confidence, tests can tell!
KRsH i also installed the update zip but when i open my wifi and try to connect it stucks at Obtaining Ip adress and then it goes from the beginning
zousoum96 said:
KRsH i also installed the update zip but when i open my wifi and try to connect it stucks at Obtaining Ip adress and then it goes from the beginning
Click to expand...
Click to collapse
We're investigating now the problem
I've posted the fixed kernel and wlan modules.
Please test it.
works perfectly for me!
Works for me too but there is no overclock and it isnt prerooted
zousoum96 said:
Works for me too but there is no overclock and it isnt prerooted
Click to expand...
Click to collapse
??
Use setcpu.
zousoum96 said:
Works for me too but there is no overclock and it isnt prerooted
Click to expand...
Click to collapse
Hello, I've been testing this and I can tell you that it works perfectly!
Can I use all the data as described in the first post!
Note: You should also ensure that you have an ST15 and an SK17 not!
you need to OC setcpu!
Everything works fine. Sorry for the overclock misinformation i thought it was preoverclocked ar 2Ghz.
2251 quadrant.. not bad for this little sucker
http://imageshack.us/photo/my-images/832/screenshot201111202148.jpg
ondemand 122.88mhz<---->1708.8mhz
2ghz <-freeze. think 1800mhz is max on my device
-- update --
Changelog:
V2.0
- Added cpu governors
Lagfree
Brazilianwax
Smoothass
- Support for voice call recording
- Added I/O Scheduler
sio
- Tiny RCU
- SLQB memory allocator
is there any possible of flashing this kernal without unlocking bootloader and fast reboot
but i rooted phone and installed cwm on phone..........
Shivatink said:
is there any possible of flashing this kernal without unlocking bootloader and fast reboot
but i rooted phone and installed cwm on phone..........
Click to expand...
Click to collapse
No friend, no way!
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Wow nice one may i request a GPU overclock please?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
thx, but what is the trick for reaching recovery?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
Thanks...
Just test it out, my Quadrant raise from 14xx (1.4GHz) to 15xx (1.6GHz) not bad..
FYI, I'm on MIUI v4 ALPHA 1 SEMC
its not include recovery. only kernel
sirkay said:
its not include recovery. only kernel
Click to expand...
Click to collapse
is it any tutorial for flashing recovery after kernel?or how to merge?
funiewski said:
is it any tutorial for flashing recovery after kernel?or how to merge?
Click to expand...
Click to collapse
here tutorial by idareyoutoclickthis
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
to merge you need bootimgtools
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
albagani said:
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
Click to expand...
Click to collapse
it depends. sometime your phone will start warm bcos your engine running beyond its normal speed. all machine have their own capabilities.
for me, normally will set speed between 1.2ghz to 1.4ghz. but i prefer 1.2ghz, dont wana force it to much
btw, its not my kernel. i added some script into ramdisk and compiled with other(s) kernel. thats all
unlocked bootloader is a must right?
Right.
Sent from my Xperia Ray using xda app-developers app
v2 Released. Scroll down for info!
Hello,
After lots of help from sirkay and FXP, I've built my own kernel that I thought I'd share with you.
This kernel wouldn't exist without the hard work of FXP. This is built from his source code. All real credit for this belongs with him (and DoomLord too, also an FXP Team member)
That said, this is my take and keeps the rather awesome release that is CM7.2 alive!
To be clear: This is a kernel for Cyanogen Mod 7.2 - Gingerbread! If you want a good ICS Kernel look at Sirkay's Thread.
So, what's different?
Uses a very recent GCC to compile, GCC version 4.6.3 which I optimised the build for Cortex-a8 and NEON.
Is compiled for performance not size (Optimize for size unticked)
Heap Randomisation is disabled.
Enabled SWAP - So you can use swap if you want to...
Default Scheduler changed to deadline, same as the Sony official kernel (still has bfq if you want to use it)
Default governor changed to ondemand.
CONFIG_OABI_COMPAT turned off. (This might break apps, haven't found any yet though)
Disabled CPUFreq Debugging.
Disabled FRAME_POINTERS, enabled STACK_UNWIND. Reason here: http://lists.openmoko.org/nabble.html#nabble-td6126708
There is no boot logo when this kernel boots. Each time I added one, the kernel refused to boot. I'll look at that. Just have patience, your phone is booting still...
(Here's where I make lots of stupid claims about how smooth, how buttery, how much battery life this kernel saves. Except I'm not a screaming idiot, so I'm not going to do that!)
I'm interested in any feedback you have, but I did this mostly for me.
And please remember the real person to thank, FXP. It's his source code I've used to build this. Also again thanks to Sirkay for his help and pointers.
Download it from here.
- muppet
Nice Kernel what's battery performance ??
aditya080908 said:
Nice Kernel what's battery performance ??
Click to expand...
Click to collapse
About the same as every other kernel.
OTG support? ?!
Sent from my ST18i
so good, This is what I looking for
@muppetmania attach here you png file. i can try to convert it to .rle for you
Could GB MIUI have the privilege?
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Anoopnk said:
OTG support? ?!
Click to expand...
Click to collapse
If you'd like me to respond to questions, please post an actual articulate question in the first place. Cheers.
Yes, I'm aware I'm a ****, it's been pointed out to me already
sirkay said:
@muppetmania attach here you png file. i can try to convert it to .rle for you
Click to expand...
Click to collapse
Thanks sirkay, but the problem isn't that I can't make a rle file, it's that the rle file when added to the ramdisk stops the kernel booting. It seems to a bug in the SEMC loader, I found a post about it somewhere. Does the boot.img need to be padded out to a certain size to work?
Sometimes my logo.rle would work, but then I'd make changes, recompile, and the kernel would hang on boot. Annoying, so I've removed it for the moment.
rivtre said:
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Click to expand...
Click to collapse
Hi rivtre,
I'd love to help, but my Ray is the only phone I have and is running CM7.2. While I could make a kernel for MIUI I'd have no (easy) way to test it. It wouldn't be fair to anyone if I started releasing untested things. So I'm sorry, it's not that I don't want to help, but no. Anyway, read the next bit to see why that's probably not a bad thing!
To All:
My kernel seems to be terrible when it comes to HD video recording. Can anyone else test this? I get heaps of dropped frames using my kernel when recording HD video vs a FXP Stock kernel. I need to look more at this, but for the moment I'd recommend not using this kernel!
v2 Released!
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
borg17a said:
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
Click to expand...
Click to collapse
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
I tried it, but It doesn't work. Booting failed
muppetmania said:
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
Click to expand...
Click to collapse
borg17a said:
I tried it, but It doesn't work. Booting failed
Click to expand...
Click to collapse
Oh well sorry. It's only for CM7.2
muppetmania said:
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
Click to expand...
Click to collapse
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Apocalyps2 said:
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Click to expand...
Click to collapse
Oh, well that's not the sort of feedback I wanted!
I haven't done much video recording the last couple of weeks (I've been away from work)
Let me do some testing and see what I can find...
Thanks for reporting
If you want a logcat I'll make one and get it to you , cheers
Sent from my ST18i using xda app-developers app
GPS
i just install your kernel on my phone...but why my GPS cannot running well
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
why your bug reporting so terrible
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
Update baseband to 75 or 77 ...reflash kernel !!!
Have fun !!
Sent from my ST18i