I have managed to pair my phone with my parrot hands free unit in the car. How ever it will not remember the pairing, and each time I step into the car I must manually pair, any ideas?
hmm... from past experiences from SGS1 and SNS
they are bound to automatically re-connect to my car for BT audio streaming, i use it practically everyday
that being said, the experience is the same with past old phones like Treo and Windows phones, although those had some minor annoyances. similar to what you have just described specially the windows phones.
so, it might be possible the SGS2 BT audio profile might not be fully compatible with your car BT receiver.
does it automatically pickup phone calls using the BT headset (handsfree) profile ?
Same here too! Sometimes with my Motorola S7HD or my Sony car stereo x.x
I'd have to go to Settings -> Wireless network -> Bluetooth and manually pair them myself. Ugh.
Any fix for this guys?
I know it sounds silly but after pairing are you accepting the notification to always allow it to pair?
krabman said:
I know it sounds silly but after pairing are you accepting the notification to always allow it to pair?
Click to expand...
Click to collapse
I have this problem with my landrover bluetooth, (I have to pair each time I use the car) However I have never seen a notification to 'always allow it to pair' am I doing something wrong? or is there a setting somewhere that I have missed.
Tom
In my case the problem is not actual pairing. I have a Pioneer bluetooth car stereo. It has been paired but for it to see the S2, the phone must be made visible each time. Despite being paired it still needs to be made visible.
Despite extensive searches, I have never found a way to make it permanently visible. There is a silly timer which turns off visibility after 120 seconds.
Previously, with my old Windows 6 and even Windows 5 phone, I used to just go into my car and go - no fiddling with phones - never even took it out of my pocket. Now I need to make it visible each time and this really bugs me.
Don't tell me it is more secure - that's my choice and should not be Android's choice.
Mahniex said:
In my case the problem is not actual pairing. I have a Pioneer bluetooth car stereo. It has been paired but for it to see the S2, the phone must be made visible each time. Despite being paired it still needs to be made visible.
Despite extensive searches, I have never found a way to make it permanently visible. There is a silly timer which turns off visibility after 120 seconds.
Previously, with my old Windows 6 and even Windows 5 phone, I used to just go into my car and go - no fiddling with phones - never even took it out of my pocket. Now I need to make it visible each time and this really bugs me.
Don't tell me it is more secure - that's my choice and should not be Android's choice.
Click to expand...
Click to collapse
have you tried editing the /system/etc/bluetooth/main.conf file
there is a line
#how long to stay discoverable mode before going back to non-discoverable
#The value is in seconds, (0=stay pairable forever)
DiscoverableTimeout =120
Needless to say try it at your own risk, you will probably need a rooted phone and something like root explorer to edit the file.
Hope this helps
Tom
I too have the same problem. My Philips SHB1400 does not get auto paired. I have manually pair it when ever I want to make a call. Never had this problem with same BT Headset and Nokia 5800
frogfoot said:
have you tried editing the /system/etc/bluetooth/main.conf file
there is a line
#how long to stay discoverable mode before going back to non-discoverable
#The value is in seconds, (0=stay pairable forever)
DiscoverableTimeout =120
Hope this helps
Tom
Click to expand...
Click to collapse
I tried that but I am afraid it doesn't work. I think other people have also tried it in other threads and it does not work either. The timer stays at 120 secs
has anyone tried playing with the blacklist file in the above directory? I tried renaming it and rebooting but it made no difference for me, but my Landrover is not specificaly blacklisted.
Pairing bluetooth with Caddy SRX.... NOT....
I downloaded the Bluetooth File Transfer app and that worked for awhile ... off and on ...... but hasn't worked for two weeks now. I've been to Cadillac - I've been to ATT store - everything is checked correctly that needs to be. This has been ongoing issue for a year now. Any other new updates about this problem ?
Thanks.
I do not get the 'notification to always allow it to pair' on some devices but do on others.
Anyone know why?
I am trying to pair a Uniden cordless phone and keep getting the pin request every time I connect.
While on my car I do get the always allow pair request and everything is fine.
Related
Hi All
I've got the HTC Leo (radio 2.06.51.07). I'm having a problem with the Bluetooth functionality.
My car has the Ford Microsoft Sync capability in it. The phone is troublesome, the music player (via A2DP) won't change tracks from the car interface, only works sometimes. The play button doesn't always work either..it works fine provided I change tracks via the phone interface. I have tried a soft reset and hard reset.
I want to try another radio version ( I think this is related to the Bluetooth, right?). Do I need to reinstall my ROM everytime I do this or can I do it on the fly?
Also, which radio versions will work with my ROM version? (1.66.405.2 (766410 WWE)
I just wanted to say i have the EXACT same problem as you with my Nissan nav system + bluetooth. The phone connects within 10 seconds or so after starting the car, but getting music to begin playing is a real chore and behaves as erratically as you described. Often I'll lean on the FF/RW keys to force it to shuffle, then hit pause or play and it will just start working all the sudden. Once it is going I can choose songs just fine, but if I try to pause good luck getting it unpaused.
Yes that's the same thing I'm having.
I noticed today that if I remove the phone from the sleeve (the leather pouch we were supplied with the phone) it seems to work more often?
I notice that with my bluetooth headphones, if the phone is inside my jacket pocket, the bluetooth reception is really crap... the music starts to cut out as its playing.
I wonder if it's something to do with the reception or bandwidth available over A2DP? Maybe I'll drop the sound quality of the A2DP right down and see if it works better then.
i had similar problems trying to connect the phone to my parrot hands free kit in my car (i still havent got it to work). try radio 2.11, its not the latest but seems to be the most stable. you with have to install hard SPL on your device, but wont have to re-install the ROM. after that give it a try, if you still have issues, have a look at tweaking the bluetooth settings through an app called hd2tweak. there is a section called bluetooth which has a few options you can change, you may need to increase the bitpool. also check that you have added the bluetooth device on the phone and that it is an authorised device and the incomming connections are accepted (this is in the standard bluetooth options). also try disabling SAP (SIM access) and see if that helps, i have to have this disabled to use my blueotooth headset, no idea why though
Is your Bluetooth always visible turned on?
If not, slide over to the settings tab and select all settings from the menu. Select the Bluetooth icon and it will ask if you want to turn Bluetooth on, tap yes. A screen will appear with the settings button in the upper left corner, tap it. A menu will appear, select the discoverable entry (the binoculars) and make sure the always visible radio button is selected. That should do it. Before making this change, the pioneer Nav. system in my car was having difficulty finding the phone. Since the change everything has worked just fine. I hope this helps.
111Kestrel said:
If not, slide over to the settings tab and select all settings from the menu. Select the Bluetooth icon and it will ask if you want to turn Bluetooth on, tap yes. A screen will appear with the settings button in the upper left corner, tap it. A menu will appear, select the discoverable entry (the binoculars) and make sure the always visible radio button is selected. That should do it. Before making this change, the pioneer Nav. system in my car was having difficulty finding the phone. Since the change everything has worked just fine. I hope this helps.
Click to expand...
Click to collapse
Hi thanks for the hint... I checked and it is set to always visible but I can see how that could have affected it! Thanks anyway
matthewharmon102 said:
i had similar problems trying to connect the phone to my parrot hands free kit in my car (i still havent got it to work). try radio 2.11, its not the latest but seems to be the most stable. you with have to install hard SPL on your device, but wont have to re-install the ROM. after that give it a try, if you still have issues, have a look at tweaking the bluetooth settings through an app called hd2tweak. there is a section called bluetooth which has a few options you can change, you may need to increase the bitpool. also check that you have added the bluetooth device on the phone and that it is an authorised device and the incomming connections are accepted (this is in the standard bluetooth options). also try disabling SAP (SIM access) and see if that helps, i have to have this disabled to use my blueotooth headset, no idea why though
Click to expand...
Click to collapse
Thanks for letting me know, I'll give that a go and post the results back. I upgraded the Radio to 2.10.50.28_2 a few nights ago, that didn't seem to make much difference, I'll try the 2.11 (if I can find it!)
Ok I think I have figured out whats going on here. It's the sense player at fault. I switched to windows media player and let it import all my tracks/playlists, and it plays the songs 100% perfect without delay every time. I can even get more track info on the nav screen, like album etc. Pause/Play/Skip work flawlessly.
I CAN'T BELIEVE IT!! You are absolutely right!
It works like a dream now. I wonder what the hell it is that is different in the HTC sense player?!
Does anyone know why the HTC sense player ignores some commands but answers others?
I can't see any option anywhere in my SGS2 to set a BT paired device as "authorized". Every time I enter in my car I've to manually select the BT device and start manually the connection.
I searched in the forum but didn't find answers.
I also tried to look at the filesystem and I found auto_pairing.conf file in which there are a lot of BT manufacturer brands listed in sections like "black list", "white list", .... Is it possible I need to manually modify this file to include my BT manufacturer in the white list section? It sounds really strange!
Is there any other way?
I'd love to know that as well.
I atlculay lvoe my sumnasg glxaay s2 wtih VliaRionlm mroe tahn my xobx
Update
I manually modified auto_pairing.conf file adding my car BT manufacturer without any success (I added it in white list with the name already mentioned in the file, so I think that's not a problem of brand name).
My SGS2 continue to ask me to manually select the device to connect to, even if only one BT device is available (car handsfree).
I have the same problem, which i didn't have with my Nexus One running Cynogenmod ROM. I keep my Bluetooth on all the time or most of the time and i would like (like i had in nexus one) when i turn on my car (with Sony MEX-BT3700U car stereo with Bluetooth) that the phone auto-connects with the stereo in a minute or less (or with my plantronics headset when i turn it on), but no, every time i have to go into bluetooth settings and connect on the paired device and then it's connected.
I heard about few application that could help but it would be nice to have it as native function on the phone. I haven't tried these apps yet but if anyone want's to try they can be downloaded from the market, firs is free, the second is not.
https://market.android.com/details?id=a2dp.Vol&feature=search_result
https://market.android.com/details?id=com.btautoconnect&feature=search_result
If anyone can help it would be greatly appreciated
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
mudferret said:
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
Click to expand...
Click to collapse
Stereo doesn't have any options, same as Plantronics headset (only ON or OFF), that means that with my old nexus one running CM (or Nokia n95 8GB) when the bluetooth is switched ON and i come near stereo or headset they connect automatically in about 30 seconds max, with my SGS 2 that doesn't happen, i tried everything but it wont auto-connect until i initiate the connection from phone manually.
I have to resolve this because it's killing me !
jartukovic said:
Stereo doesn't have any options
Click to expand...
Click to collapse
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Mine auto connects to my JVC car head unit, but doesn't to my Belkin Tunestage. No idea why. As it happens, this suits me but it'd be nice to be able to control it.
And the commute begins. The auto connection is an option on my JVC deck, no such option on the phone.
Sent from my GT-I9100 using XDA App
mudferret said:
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Click to expand...
Click to collapse
The stereo is recognized same as Plantronics and that is as a head set, but it doesn't want to automatically connect to either of them, every time i have to initiate the connection. There is one way to connect it (partially automatically ) but that's not the solution - i have to turn on the bluetooth on my phone before starting my car, then when phone is in searching mode if the car is started (stereo turned on) then it will connect automatically, if the search mode (that is active for a short time after turning the bluetooth) ended before i start the car (for instance if i keep my bluetooth on all the time on my phone) then it wont connect automatically.
Am i any clearer about my problem ?
I hear what you're saying but it appears that auto connection is initiated by my stereo. If I turn auto connect off on my stereo there is no connection until I tell my phone to connect. I don't see anything on the gsii settings to have the phone auto initiate the connection. I have a recent JVC deck fwiw.
Sent from my GT-I9100 using XDA App
I will check one more time is there any bluetooth settings on my car stereo, but i'm 90% sure that it doesn't have, because this is the first phone that doesn't connect automatically.
I have had similar issues with mine, it will pair with my Kenwood DNX520VBT but wont auto connect.
however i now have a workaround
Turn bluetooth on your GS2 first, then turn on you Radio. once my Radio boots up it initiates the connection and auto connect works.
if i turn on the bluetooth on my GS2 after my radio it never works.
ive got a sony bt3700 stereo, it connected perfectly with my samsung wave, i just upgraded to a galaxy s and i have to do it manually every time so its not the stereo.
Same thing happened to me, old nexus one with CM7 is connecting ok but i have to connect SGS2 manually or make sure that my bluetooth is ON on my phone before i start the car.
I may have the answer......
Hi,
I have a sort of work around.
My Pioneer head unit refuses to auto connect to my SGS2 and I have to do it manually (I connect from the radio in 4 clicks but thats not the point). This was driving me nuts as previous handsets I owned connected within 5 seconds of being in the car.
I then discovered ROMS and went for the Criskelo ROM and it put me on Android Version 2.3.6 (Not sure if that made a difference or its actually the ROM).
Now with that sorted I found that I have an extra function in my bluetooth settings. When I make the device visible I can then choose the visible time-out length. If I set this to NEVER then I have no problems connecting to the headunit everytime I get in my car.
The only problem I have with this is that I pop my phone into Airplane Mode each night and because that disables the bluetooth it loses the time-out setting so I have to put the time-out back to never each morning.
With setting the time-out to never I'm not sure what battery drain is like because I'm constantly on my phone and my battery depletes rapidly anyway but it seems like a fix for now.
I hope this makes sense and helps people out until a proper fix becomes available.
Cheers,
DJ Sploits
Hi All,
Sorry for bumping an old-ish thread, but it seemed the most appropriate thread, and better than creating a new one of the same topic!
This is what I believe to be true:
*IF* Bluetooth is enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will auto-connect to the GS2
*IF* Bluetooth is NOT enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will NOT connect to the GS2 (understandably!).
*IF* the phone has previously been paired with the car headunit, and the bluetooth on the GS2 is enabled *AFTER* the car has been started, it does NOT Auto-Connect.
From this, I assume that when the car is powered on, it searches for previously paired handsets in order of most recently connected first. If it finds one, then it WILL connect.
Now:
If I leave Bluetooth enabled on my phone, the battery is significantly depleted my mid-afternoon.
I've started using an app which uses the "rough location" (not GPS) to monitor where the phone is located. If it deemed to have moved in X period of time, then it enables bluetooth.
This is great, and works a charm ... BUT it does mean that bluetooth stack on the GS2 is enabled AFTER the car has been moving for a period of time, and thus does NOT auto-connect.
What I've been searching for is:
"When BT stack is enabled on GS2, can it look for previously paired devices and initiate the connection itself?" (Rather than the car connecting to it?) Is there a script or app to do this?
Hi WTFH,
I think it might be more headunit specific. I always have my bluetooth on but it wont connect automatically to my headunit unless I have it set to constantly discoverable (on the handset).
I also use a power saving program called Green Power Premium which will cut bluetooth/data/wifi after a certain amount of time when the phone is in a sleep state. Its great fro saving power as my phone isnt constantly looking for a wifi signal (I don';t use it to control my bluetooth though as I need it on for my car).
Hey DJ_sploits,
Thanks for that ... Yes, I understand that some headsets do not auto-connect to the GS2 if the phone is NOT visible.
But what does seem to be constant is that the GS2 will not auto-connect to any of the headsets if the bluetooth stack on the GS2 is enabled AFTER the headset has come online and available.
One workaround I'm thinking of is:
Enabling a profile which says "When connected to a power source (I'll have to use the power adaptor) then enable bluetooth". Connecting my phone to the power first before starting the car should enable the BT stack before the headset tries to connect.
In fact I could extend this to say "Only enable bluetooth when using power adaptor, and not connected to wifi".
It's still a pain to do this though, as I tend to just jump into the car and don't want to faff about with connecting this and that.
The only other work around I use is to set the visiblity to constant (depending on what android software version you are on). My headunit always picks the phone up if I have it setup like this. the only thing with that is it will eat the battery even more (which is annoying considering there are other phones out there that constantly have their bluetooth on and you never see the battery getting hammered).
The only flaw I can see in your method is the fact you need a power source to knock on the bluetooth. Great for powersaving but it would then mean you would have to remember to connect it to a car charger everytime you got in the car (not too bad if you have it constantly plugged in to the cigarette lighter) and as you set this can be a bit of a faff.
The only way I can see in sorting this is using a power saving app but having your visibilty constantly on for the bluetooth and then we just hope it doesnt eat the battery too much (not to bad for me as I have a charger at work but could be a pain for others). The only problem with this (apart from the battery issue) is that if you knock the bluetooth off or knock the phone to airplane mode (as I do at nights) then when you knock the bluetooth back on it forgets that you want it to be constantly visible so you have to go through the settings and check the box
Hi All,
I have an NFC enabled Samsung Galaxy Nexus and have placed NFC tags in specific places (car, living room, home theater, bedroom, etc.) so that I when I set my phone on the NFC tag I can automatically play music over Bluetooth in that location.
I am trying to completely automate connecting to a *specific* Bluetooth device. (I am not looking to simply toggle Bluetooth on or off, or select the desired Bluetooth device from a menu.) I am currently using "NFC Task Launcher" to accomplish the majority of this, but as far as Bluetooth is concerned, the most I've been able to automate so far is to simply Bluetooth on or off. (I also tried "Tasker" but the functionality I am looking for is missing from this app as well.) I have not found a way to read an NFC tag and automatically connect to a specific Bluetooth device based on which tag is read, nor have I even found a "one click" app / widget that connects to a specific Bluetooth device. (If such a "one click" app / widget exists, I could automate the launching of that app to make the connection.).
(Also having the Bluetooth device in each location initiate the connection isn't a viable solution, I need for the phone to iniatiate the connection.)
Does anyone have any suggestions? Thanks in advance!
Ran across this looking for the same answer. Surprised no one has responded in over a month here.
Did you have any luck finding a workaround for specific BT device connections?
Hi,
I am the developer of MacroDroid an automation application for Android (that supports NFC tags).
This is a feature one of my users has just requested, so I'm just starting to look into the feasibility of adding it. (I came across this post during my initial research).
I will report back here on what I find and if all goes to plan I'll get the feature added to MacroDroid ASAP.
In the meantime, I'd appreciate ALL feedback (positive and negative) with regards to MacroDroid as I hope to make it as powerful and flexible as possible. It's available on Google Play here:
https://play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en
Cheers,
Jamie
Just a quick follow up to my last post.
I believe it is possible to implement functionality to connect to a specific device. I currently don't have an appropriate device to test this, but I have one on order. As soon as I receive it, I'll have a go at adding this to MacroDroid.
In the meantime the following app on the market:
https://play.google.com/store/apps/details?id=a2dp.Vol&hl=en
Has the capability to connect to a second Bluetooth device when a Bluetooth connection is established. This may or may not help depending on what you are doing.
Any update on this? I'm also in the same boat. My car doesn't automatically connect anymore, never really did, I think its Bluetooth > 3.x on phone( 4.0 right now, but same on older past devices on S3 ) and the stereo bluetooth is older version( can't remember exactly. )
Anyways, thanks dev for posting about the other app, plan on trying it out tomorrow. In the meantime have you made any progress on your app for this functionality? I'd rather keep everything( all settings ) in one app if I can. Don't think Tasker allows this still, not sure on locale but I doubt it also.
Eagerly awaiting an update
A few more options
Did a little more searching just in case anything new has been released recently - came up with a few new options.. None seem to suit my need (trigger connection within Tasker via a plugin or directly opening an app), but posting here since they may help others.. I haven't tried these - just going on app descriptions.
So, in addition to A2DP Volume as suggested by UndeadCretin, which would be the best option if you want the connection to a A2DP device when another BT device connects, there's also Car Music Connector (https://play.google.com/store/apps/details?id=com.cleansoft.carmusic) which would seem to fit the bill for most people perfectly. Free, and "Connects you device to Bluetooth stereo in one widget click or NFC tap." Downside would seem to be that it would need to be set as default NFC app for one tap NFC triggering.
If just a widget is needed, Bluetooth Autoconnect (https://play.google.com/store/apps/details?id=com.btautoconnect), which is a paid app - although Car Music Connector also has a widget so is probably a better (and free!) choice.
Edit: Scratch that.. Car Music Connector doesn't prompt for a device to connect to.. I only have 1 A2DP device paired, and it wont connect to it (just times out) - maybe someone else will have better luck.
Bluetooth Autoconnect seems like it should work, however it enables/disables bluetooth at the same time - so if you already have bluetooth turned on, it turns it off. <sigh>
I'm unable to get it to connect to the either of 2 A2DP devices though - emailed the Dev hoping that it's just something funky with my device (Galaxy S3) that can be worked around.
Interested in this as well.
Firstly sorry for the long delay in replying!
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device. I have it working on my 2.3 and 4.0.4 and 4.1 devices but I only have a single audio device to test against. Some users have reported that it's not working for them, so if anyone does try this I would appreciate any feedback if it works or doesn't. If it's not working for you could you please tell me the device, OS version and device you are trying to connect to. Feedback here is fine, or mail me at: [email protected]
Best Regards,
Jamie
UndeadCretin said:
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device.
Click to expand...
Click to collapse
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Kaibosh said:
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Click to expand...
Click to collapse
The resource usage of MacroDroid should be very low as it is effectively dormant in most cases. MacroDroid does run as a foreground service so it displays a persistent icon in the notification bar. If this annoys you there is an option in settings to turn off the foreground service. In most cases it will still work but YMMV. Anyway you can get the basic functionality for free, so you can give it a try and see how it works for you.
Regards,
Jamie
I have just submitted an updated (V1.3.8) that will hopefully solve the issue some users were seeing with the Bluetooth audio connection. I appreciate any feedback if it works (or not) for you....
Car Music Connector
Hello,
In addition to A2DP profile Car Music Connector waits for Headset profile to be connected by default. This is more reliable for most car bluetooth enabled stereos. If you are using it with A2DP only device you need to disable "Wait for Headset Bluetooth connection" in settings.
Hope that helps.
Alexander Shakhov.
Car Music Connector author.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Awesome! Gonna download it now and try it in the morning... but ya still get the thanks regardless of how it works for breathing life into this thread
I'm guessing the answer to my question is likely to setup a Tasker profile, but I thought I'd ask anyway. Does anyone know of a way to get Bluetooth on my OG to autoconnect to a device it's already paired to?
For example, when I get in my car and want to connect to my stereo, I turn on Bluetooth, then have to go to my paired devices and manually connect to the stereo. I'd much rather just turn on Bluetooth and have the phone autoconnect to the stereo.
I'll likely soon set up an NFC tag for my car, so I should be able to turn on Bluetooth and connect to the stereo with that, but wanted to know if there was another solution in the meantime.
Any ideas?
Digil said:
I'm guessing the answer to my question is likely to setup a Tasker profile, but I thought I'd ask anyway. Does anyone know of a way to get Bluetooth on my OG to autoconnect to a device it's already paired to?
For example, when I get in my car and want to connect to my stereo, I turn on Bluetooth, then have to go to my paired devices and manually connect to the stereo. I'd much rather just turn on Bluetooth and have the phone autoconnect to the stereo.
I'll likely soon set up an NFC tag for my car, so I should be able to turn on Bluetooth and connect to the stereo with that, but wanted to know if there was another solution in the meantime.
Any ideas?
Click to expand...
Click to collapse
As long as I turn on Bluetooth before I start my car, mine auto-connects to my Hyundai Sonata just fine...
Sent from my LG-E970 using xda app-developers app
My phone auto connects to my car too. Even if I forget to turn it on before I start my car and toggle it on after the car has already started, they will find each other and auto connect. They do not connect instantly though (maybe the BT scan interval is a little bit longer). Maybe you just have to wait a bit?
I have Llama installed and have a profile setup so that when it disconnects from a known Wifi (leave home/work/etc.), the phone will turn on BT automatically and try to connect to the car. Another profile is set up so that once the BT does connect to the car, it will turn off Wifi on the phone and also turn up volume and vibrate "on".
Hmmm, thanks for the replies. I'm wondering if my issue is that I've only turned Bluetooth on after the car was running, not before. If anything, I'll just set up a Llama or Tasker profile. Thanks again!
Digil said:
Hmmm, thanks for the replies. I'm wondering if my issue is that I've only turned Bluetooth on after the car was running, not before. If anything, I'll just set up a Llama or Tasker profile. Thanks again!
Click to expand...
Click to collapse
Yeah, if I turn on bt after I start the car then it won't auto-connect.
Sent from my LG-E970 using xda app-developers app
Just a heads up to anyone interested. Tasker doesn't have an action to autoconnect to paired Bluetooth devices. However, there is an app available in the Play Store solely for this functionality:
https://play.google.com/store/apps/...sMSwyLDEsIm9yZy5teWtsb3MuYnRhdXRvY29ubmVjdCJd
This app is also a Tasker plugin, so you can use it in conjunction with any Tasker profile. Good stuff.
Digil said:
I'm guessing the answer to my question is likely to setup a Tasker profile, but I thought I'd ask anyway. Does anyone know of a way to get Bluetooth on my OG to autoconnect to a device it's already paired to?
For example, when I get in my car and want to connect to my stereo, I turn on Bluetooth, then have to go to my paired devices and manually connect to the stereo. I'd much rather just turn on Bluetooth and have the phone autoconnect to the stereo.
I'll likely soon set up an NFC tag for my car, so I should be able to turn on Bluetooth and connect to the stereo with that, but wanted to know if there was another solution in the meantime.
Any ideas?
Click to expand...
Click to collapse
I have a very similar issue. I have two bluetooth devices in my car. My handsfree system and a stereo adapter. The phone autoconnects to the handsfree system but I have to manually click on the stereo adapter every time to get it to connect. No ordering of on/off etc seems to alleviate this. Any ideas?
themoe said:
I have a very similar issue. I have two bluetooth devices in my car. My handsfree system and a stereo adapter. The phone autoconnects to the handsfree system but I have to manually click on the stereo adapter every time to get it to connect. No ordering of on/off etc seems to alleviate this. Any ideas?
Click to expand...
Click to collapse
The app I mention above has an option to autoconnect to all paired devices. This might be what you're looking for.
Digil said:
The app I mention above has an option to autoconnect to all paired devices. This might be what you're looking for.
Click to expand...
Click to collapse
Yea, already gave that a shot. Tried just the app, then tried a tasker profile that would try to connect to the A2DP device if the handsfree device was connected too. Neither worked. Gonna try another couple apps to see where it gets me; if not I'll just live with having to always click it in the settings menu until an AOSP rom comes along that I would be willing to run (not quite annoyed enough at the LG software to give up an SD card/8gigs and hardware keys)
themoe said:
Yea, already gave that a shot. Tried just the app, then tried a tasker profile that would try to connect to the A2DP device if the handsfree device was connected too. Neither worked. Gonna try another couple apps to see where it gets me; if not I'll just live with having to always click it in the settings menu until an AOSP rom comes along that I would be willing to run (not quite annoyed enough at the LG software to give up an SD card/8gigs and hardware keys)
Click to expand...
Click to collapse
Try this app. Have been using it for a long time now. I have the same problem as you. You can set it up to automatically connect to a second device ( your music adapter), right after it connects to the first one ( your car). There are also more useful settings there.
https://play.google.com/store/apps/...nav_result#?t=W251bGwsMSwxLDMsImEyZHAuVm9sIl0.
So I picked up the htc stereoclip (a100) the other day because my car stereo will do bluetooth voice calls, but not a2dp natively. It works great when connected, but that's where my problem lies. I posted this in general android as I think it might have to do with android directly and not specific to a specific phone since the same issue is occurring on my galaxy s 3 and my wife's htc one x. The problem is, if I leave bluetooth enabled on either phone, get into the car and start it up, it will not automatically connect with the stereoclip. I can resolve this by either turning bluetooth off then back on, or selecting the stereoclip to connect to in bluetooth settings. It's not a lot of work, but its rather annoying to dig my phone out and do that. Also, if I wanted to use tasker to say autoplay pandora when it connects, the automation is kinda lost as I still have to pull the phone out of my pocket. Any ideas on how to resolve this? Any apps in the store fix this or at least put a bandaid on it so I don't have to fiddle with it myself?