[KERNEL][2.3.4][cwm4.0.1.4][BLN] ⇒☆Jame Bond☆☄Galaga☄ v①.⑨.②.②★clockwork-ra★ - Galaxy S II Original Android Development

[KERNEL][2.3.4][cwm4.0.1.4][BLN] ⇒☆Jame Bond☆☄Galaga☄ v①.⑨.②.②★clockwork-ra★
·:*¨¨*:·..·:*¨☆Jame Bond☆·:*¨¨*:·..·:*¨
straight from The Land of Smiles
㋛ this is a simple "no-frills" 1.2ghz kernel
latest version features ⇒☄Galaga☄ v①.⑨.②.②
✭ro.secure=0
✭clockwork(ra) 4.0.1.4 (Galaga)
✭BLN
✭bootanimation support
✭vitalij's touchscreen fix
There was apparently a lack of carebear. [koush]
Click to expand...
Click to collapse
*new -bln
♢get BLN pro app here♢
*note about bln from creams
"1. Upon receiving notification when deep sleep state of the terminal, wake_lock once
2. Thereafter, regardless of whether the lights blink or continuous LED, hold the wake_lock.
3. End event lighting from BLN Control App (access to sysfs) and release the regulator in wake_unlock.
4. migrate to deep sleep.
5. These repetitions."
-in other words, if you use the pro app to eventually turn off led's and thus disabling the wakelock then the phone will deep sleep again and battery life will be normal
special thanks to akent, neldar and creams for the work with bln
-use of setcpu is not recommended!,
the kernel takes care of itself
» initramfs source
» kernel source
» additional source
»changelog
»installation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
☣liblights☣
☣su 3.0 beta4☣
☄Galaga☄ v1.9.2.2[2.3.4][cwm4.0.1.4]
♡Care Bear♡ v1.9.1[2.3.4][cwm4.0.1.4]
♡Care Bear♡ v1.9[2.3.4][cwm4.0.1.4]
♡Care Bear♡ v1.8[2.3.4][cwm4.0.1.4]
♡Care Bear♡ v1.7.3[2.3.4][cwm4.0.0.8]
☆Jame Bond☆ v1.7.1[2.3.4][cwm4.0.0.8]
☆Jame Bond☆ v1.7[2.3.4][cwm4.0.0.2]
☆Jame Bond☆ v1.6 [2.3.4][cwm4.0.0.8]
☆Jame Bond☆ v1.5.2 [2.3.4][cwm4.0.0.5]
☆Jame Bond☆ v1.5.1 [2.3.4][cwm4.0.0.2]
☆Jame Bond☆ v1.3
☆Jame Bond☆ v1.2
☆Jame Bond☆ #1
*note
- kernels now have (v1.7+) clockworkmod modifications thanks to J_rodd. it gets rid of all the extra no's which are very annoying, also some other mods "more Amon_RA like"
-If you like it, head over to J_rodds thread to thank him
-J_rodds mods haven't been implemented on v1.8 (back in for v1.9)
-We all know that clockworkmod is the hard work of Koush and I take no credit for it. If you have any problems with this, please do not bother koush. please post here or pm me
*please read
a quick note about the buttons for recovery. "most" recoveries will use the volume rocker to move up and down and the home button to select. this recovery not only uses the volume rocker to move up and down but also the soft menu and home button respectively. the power button will select and the back soft key will go back.
by using using the soft menu, you can rapidly scroll down through all your files to the desired one...it also can be done with the volume rocker, but it takes a little longer...
*recovery keys
scroll up ↑ = volume+ or home
scroll down ↓ = volume- or menu
select ✓ = power
back ☇ = back (or highlight "++++go back++++")
v1.9.2.2 Galaga
v1.9.1 (party dude care bear)
v1.8 (care bear)
v1.7.3 (care bear)
v1.7.1 (terminal green)
v-1.7 (android green)
v-1.6 (blue)

---

-changelog
8/22/2011;version 1.9.2.2 Galaga recovery (redo) ftw!
Click to expand...
Click to collapse
8/22/2011;version 1.9.2.1 Galaga recovery ftw! bootanimation now supported, vitalij touch screen fix, and paul obrien permission fix... F%$! auto root (flash su from recovery)
Click to expand...
Click to collapse
8/8/2011;version 1.9.1 su updated to version 3.0 (thanks to slayerXcore for the heads up)
Click to expand...
Click to collapse
8/08/2011;version 1.9 auto-root and auto-install liblights is back! also J_rodds mods back in with possibly the last of the care bears (red)
Click to expand...
Click to collapse
8/03/2011;version 1.8.1 added auto-install liblights & root (pulled, script was wrong...flash v1.8)
Click to expand...
Click to collapse
8/03/2011;version 1.8 ltd ed care bear recovery updated to 4.0.1.4. BLN support (lime)
Click to expand...
Click to collapse
7/18/2011;version 1.7.3 limited edition care bear recovery (cyan)
Click to expand...
Click to collapse
7/17/2011;version 1.7.1 recovery updated to 4.0.0.8 (term green)
Click to expand...
Click to collapse
7/13/2011;Ltd. Edition version 1.7 J_rodd mod clockwork recovery (4.0.0.2)
Click to expand...
Click to collapse
7/12/2011;version 1.6 recovery updated to 4.0.0.8 (in blue)
*thanks codeworkx you beat me too it
Click to expand...
Click to collapse
7/11/2011;version 1.5.2 recovery updated to 4.0.0.5
Click to expand...
Click to collapse
7/09/2011;version 1.5.1 supports 2.3.4
version 1.4 is lost in bln testing
Click to expand...
Click to collapse
7/06/2011;version 1.3 added clockwork 4.0.0.2
*bln is still coming, but not yet
Click to expand...
Click to collapse
5/17/2011;version 1.2 fixed haptic
Click to expand...
Click to collapse
5/16/2011;version 1.1 added ro.secure=0 (insecure)
*note-more features to follow, bln is high on the list
*note-version immediately pulled-broken haptic
Click to expand...
Click to collapse
5/12/2011;version #1 completely stock kernel
Click to expand...
Click to collapse

---

-installation
2 different ways...
1st way: when no access to odin (or just plain sick of it) go to the market and get DarkyROM2 Tool
then I make a folder called zimage and then a subfolder with the kernel version
-extract the zimage from the .tar and place it in the "version folder"
-then flash/install file from SDCARD
2nd way:
-install as you would a rom through odin (using pda)
-put the phone in download mode by pressing (volume- & home & power), then volume+ to confirm
-doesn't wipe or no need to..
once you install the kernel, to get root...
-download the superuser attachment
-place superuser zip on your sd card
-power off phone
-then press and hold (volume+ & home & power)...keep holding until clockwork recovery pops up (takes 2 or 3 cycles)
-then flash su zip from sd
-also flash liblights from recovery for bln
-to remove yellow triangle
1st way;
-after you odin in a "jame bond" kernel (you will now have root)
-reboot, then back to download mode and install the stock kernel with odin.
-then reflash the "jame bond" kernel with DarkyROM2 Tool
2nd way;
-search galaxy jig on ebay (buy..wait for ups)
-then once you "run the jig" the triangle will be gone
-flash all future kernels using the Darky app and it won't show again
*note latest su and liblights are under downloads in first post

---

Is it overclocked?

---

a quick question: what difference does this kernel do ! I mean is it faster? overclocked?
and does it work with specific firmware? such as KDD or KE1?

---

More information needed ;-)
Sent from my GT-I9100 using Tapatalk

---

A kernel from Thailand is very nice to have , but we do need some more infos
Like what is different on this kernel , what is already added , if its rooted e.t.c.

---

source code is missing ^^
I suggest forking supercurio's base kernel from git for sharing (also for GPL compliance)

---

Hope you do just Great!
this kies and odin is all new to me said:
Looking forward to lots of good stuff from you. I am about to get my SGS2 (as and when it launches in India actually) and if you get us awesome stuff on SGS, I assure you some donations
Let's make Galaxy S II the best hacked device EVER!!!
Click to expand...
Click to collapse

---

iakovidis said:
A kernel from Thailand is very nice to have , but we do need some more infos
Like what is different on this kernel , what is already added , if its rooted e.t.c.
Click to expand...
Click to collapse
like the title says wip (work in progress), for right now it is a stock kernel, really not worth flashing other than a different kernel version in about phone
I'm testing an uv version right now, the downside is it takes time to truly compare...
-result of first uv=fail, I went to much
bilboa1 said:
source code is missing ^^
I suggest forking supercurio's base kernel from git for sharing (also for GPL compliance)
Click to expand...
Click to collapse
sorry about that, I put up my sources, it was late when I posted this

---

I have extremely high hopes for this Kernel. James Bond has one of the most stable & feature rich kernels for the Nexus S. Can't wait to see what you'll do with the SGS II

---

good to see you also here
good work

---

So excited to have the James Bond Kernel coming to the SII. I used this kernel on the Nexus S and loved it.
Do you have any plans in getting BLN integrated into one of your releases, I really miss a notification light.

---

balto said:
Do you have any plans in getting BLN integrated into one of your releases, I really miss a notification light.
Click to expand...
Click to collapse
ogdobber said:
*todo- bln, uv,patch to .12, and whatever supercurio comes up in the coming weeks
Click to expand...
Click to collapse
I think he does

---

one question... does the I9100 have a fps cap? (60fps)
if so, can you take a look at it and maybe remove it?
i have tried THIS but it didn't work...
they also say that's only for custom kernels but some of them got it running on a stock kernel... 83 fps.. i mean wow...
i still got an avg of 60 in fps2d and the top in quadrant was 86fps (only half an second long) so i thought there was a cap...

---

Forget it.... They are getting 140 fps but there are some problems... They wanna go back to 50-60 fps.. ^^
Sent from my GT-I9100 using XDA Premium App

---

Hey ogdobber, any chance of sharing how you managed to get vibration working? Thanks
EDIT: NVM, got it working now!

---

Vibration and haptic feedback
In my phone vibration still doesn't work. Tried some factory resets and still no vibration or haptic feedback. Tried this kernel an no luck.
I'm considering sending it back as this looks like an hardware problem.

---

braap said:
In my phone vibration still doesn't work. Tried some factory resets and still no vibration or haptic feedback. Tried this kernel an no luck.
I'm considering sending it back as this looks like an hardware problem.
Click to expand...
Click to collapse
do you have haptic enabled in sounds?
note* if you downloaded v1.1 haptic is broken

---

hey. firstly mate really appreciate the effort in developing a kernal for the i9100.just wondered if you were able to make a new KE2 kernal.i have just flashed your kernal im on villianrom.hes using the stock kernal i belive anyways my phone kept root from before.but just as a reference quadrant score is 400points lower.i think this is because of your kernal being KDD.i had same score as using yours when i tryed using supercurios kernal also.am i correct for the reason?sorry for big ramble.