Related
Hello there.
I´m really new but certanly i have read a lot on the forums. Still I have managed to mess everything once more.
I have a wizard love G4
ROM Version 2.26.10.2.wwe
Rom date 06/07/06
Radio 02.25.11
Protocol 4.1.13.12
ExtROM 2.26.10.105
Messed around with the splash screen from equinoxe and to make it work i needed to update the RUU from 2.00.1 that was on the installation files to RUU 2.5.2 that was extracted from an HTC.exe rom update download.
Finally it worked just fine.
Then, i decided to give it a go on the SoftSPL procedure in order to install the Black Diamond 2.0 touch rom on my phone so I placed the downloaded "Safe ROM" on the ROM folder. Started the application and everything was looking good. Then the RUU came up with the 2.00.1 version so I was a little worried, but then the so called white screen on the cell phone started but with a progress bar (how convenient)... I´m not sure if i was supposed to see the progress bar at all on the cell phone or just a full white screen.
Anyway, after 10 minutes give or take, the bar got to 100% and the pc software said Congratulations... but then the cell phone automatically restarted and inmediatelly it went to the bootloader three color screen.
I proceded with a hard reset before anything, right on the bootloader screen, (radio and voice buttons hold with reset button and then the send button accepting the restore to factory). Then the phone restarted but also in bootloader screen. So i decided to turn it off by holding the power button for a while. It did turn of, but this is where everything goes crazy... it does not turn on again... it even don´t show no led light when connecting the phone to the usb or the ac wall adapter...
This happened to me a few days ago using the shelltool with the same Black Diamond 2.0 Touch rom but probably i made a different mistake back then.
Anyway I removed the battery and the sim card and reinserted everything again, even tryed it out without the battery and direct connection.
When this happened to me the first time, I just leaved the phone without the battery all night and on the next day it turned on but on the bootloader so I drove it to our local unlocker that managed to re-install the wizard-love once again.
I´m wondering if anyone is having this same issues, or something similar.
Probably i should have ask first if the Black Diamond 2.0 was a safe g4 rom, which i´m not sure but won´t dare to try it again.
I had the same problem.
i'm afraid using the SoftSPL now :S
Try the TNT 5. I used soft spl to install tnt 5 from the wizard love rom.
http://forum.xda-developers.com/showthread.php?t=328917
They have a touch version u can think about.
Yes!!!! I love it now!
I downloaded the last SoftSPF. Now it runs a little slower on the first checking part but then it turned the screen all white!!!! Beautiful scary little issue that fortunatelly equinoxe stated on the flashing instructions.
Then I went for the TNT 5.0 Professional with HTC Home Plug-in on my CID LOCKED QTEK-9100 (But that it´s actually looking exactly like a 8125 Cingular), and it did it!.
One question tough... I´m running windows vista on my personal computer so I flashed the cell phone on another computer at my office that has windows xp, but still inside the TNT 5.0 Professional installation pack there is a RUU that states Windows Vista Update Utility. I´m wondering if this would actually run under vista... If so, then I believe that you can make SoftSPF also run under vista by just changing the 2.exe file on the SoftSPF compilation with this Vista_ROMUpdateUtility.exe file on the TNT 5.0 Professional compilation release.
Anyone care to try?
Probably I will be trying to flash a new radio with this RUU Vista utility under vista, to see if it flashes... If it does, then i don´t see why you can´t run try it out under vista.
I´m attaching only the RUU for vista so you can put inside any nk.nbf with it to use it under vista.
danielvelez said:
Hello there.
I´m really new but certanly i have read a lot on the forums. Still I have managed to mess everything once more.
I have a wizard love G4
ROM Version 2.26.10.2.wwe
Rom date 06/07/06
Radio 02.25.11
Protocol 4.1.13.12
ExtROM 2.26.10.105
Messed around with the splash screen from equinoxe and to make it work i needed to update the RUU from 2.00.1 that was on the installation files to RUU 2.5.2 that was extracted from an HTC.exe rom update download.
Finally it worked just fine.
Then, i decided to give it a go on the SoftSPL procedure in order to install the Black Diamond 2.0 touch rom on my phone so I placed the downloaded "Safe ROM" on the ROM folder. Started the application and everything was looking good. Then the RUU came up with the 2.00.1 version so I was a little worried, but then the so called white screen on the cell phone started but with a progress bar (how convenient)... I´m not sure if i was supposed to see the progress bar at all on the cell phone or just a full white screen.
Anyway, after 10 minutes give or take, the bar got to 100% and the pc software said Congratulations... but then the cell phone automatically restarted and inmediatelly it went to the bootloader three color screen.
I proceded with a hard reset before anything, right on the bootloader screen, (radio and voice buttons hold with reset button and then the send button accepting the restore to factory). Then the phone restarted but also in bootloader screen. So i decided to turn it off by holding the power button for a while. It did turn of, but this is where everything goes crazy... it does not turn on again... it even don´t show no led light when connecting the phone to the usb or the ac wall adapter...
This happened to me a few days ago using the shelltool with the same Black Diamond 2.0 Touch rom but probably i made a different mistake back then.
Anyway I removed the battery and the sim card and reinserted everything again, even tryed it out without the battery and direct connection.
When this happened to me the first time, I just leaved the phone without the battery all night and on the next day it turned on but on the bootloader so I drove it to our local unlocker that managed to re-install the wizard-love once again.
I´m wondering if anyone is having this same issues, or something similar.
Probably i should have ask first if the Black Diamond 2.0 was a safe g4 rom, which i´m not sure but won´t dare to try it again.
Click to expand...
Click to collapse
Your screen should turn white, completely white... Not white with a progress bar. That is the RUU that you were seeing. Haret.exe cause the screen to crash and then it turns completely white. THIS IS NORMAL.
Try using this version: SoftSPL - RC1. Before I got a G3 and CID unlocked it, this version of SoftSPL worked for me time and time again.
Thank Dan.
Actually the new SoftSPL worked like a charm. The screen went blank as a crash, and 10 minutes later i was on a TNT 5.0 Professional Qtek.
danielvelez said:
Thank Dan.
Actually the new SoftSPL worked like a charm. The screen went blank as a crash, and 10 minutes later i was on a TNT 5.0 Professional Qtek.
Click to expand...
Click to collapse
No problem... I know before I got my hands on a G3, thats exactly what I used to upgrade roms.
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
SHIK1 said:
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
Click to expand...
Click to collapse
****.... tough luck mate....
As long as u got rid of hspl you should be able to get the phone fixed by htc or tmobilie or whatever plan ur on..
Good luck
bought it off ebay..so cant really take it to my provider..the phone is over (just) a year old so probably not in htc warranty? how do i check?
i will donate money to anyones paypal account if they can help fix this
Install the correct stock ROM (the one who match with your S/N) over SD.
how do i know which matches? and how do i do it via sd?
SHIK1 said:
how do i know which matches? and how do i do it via sd?
Click to expand...
Click to collapse
Put in your serial no of your phone (found underneath the battery) into the HTC support website and you will find the ROM that matches your phone. You will then need to download the ROM, extract it and take the .img file out of it and rename it as LEOIMG as before and flash via SD card.
shouldn't even need to use sd card. the correct rom should downgrade the spl over usb.
phone into bootloader,connect usb, run your update .exe, done.
you are guilty of getting over excited and lack of research. five minutes should have told you that you can't use hspl to install 3.14, and that flashing from sd first removes hspl,changes spl, then runs the compatibility tests again and shows exclamation mark if it fails.
I had the same problem i thought i bricked my htc which i was testing before buying i know stupid idea brick the phone before i buy it, basically i had installed hspl 2.08 from 1.42.00 and installed the froyo ROM build which was all good it was working but running really slowly, i couldnt get the ringtone to change which was probably due to the fact that the build did not come with any preinstalled which is fine as i downloaded a ring on mp3 and set it as that, and the radio was one of the latest which wasnt giving me a good reception so i decided, fine that's ok let me get my hands on some apps now so i downloaded a couple tweaks, multiboot and games and put them on my sd card; as well as a tweak to enhance the speed as it was going really slowly on the android, the second i put my sd card into the phone and tried running metamorph an app i was advised to use to apply a windows 7 mobile theme the phone went blank, the only way to get the phone into tri coloured screen mode was to plug it in via the FRONT usb port of my machine which would bring my phone back to life.........oh so i thought, so i was able to see the phone load up to htc white load screen and it would display my buil in red BUT after that it should show the "quietly something something message" and load right.....WRONG the phone just restarted and it would just do the same thing go to htc and restart so i managed to use the vol down+cancel call button to kick it into the tri coloured screen and managed to get the phone back into hspl 1.42.00 which completed but then i still couldnt get past the htc welcome screen!! ARGHH!!! So after spending a whole night applying different hspl's and trying to reflash teh rom via usb and failing i thought id give up and just pay for a bricked phone which i was paying £150 for btw (i know a bargain and brand new!!!) BUT as i came into work today i thought let me try a different pc as that may affect it, and after i downloaded an official ROM update for the phone 1.72 i i plugged my phone in and after literally 20 seconds the bloody thing turned on and started working as normal with no multiboot or rom installed i think i shall be CAREFULLY installing android on the phone one last time. . . . I hope this helped any users out there as i was panicking, and please remember that whatever you do is seriously AT YOUR OWN RISK, do not just jump the gun...sit down do some proper reading and watch some videos because after having to trouble shoot i must say im pretty good at applying roms hahahah i shall be very cautious from now on though. . .. sorry if the post was too long i am a noob my first post!!
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
So u managed to save ur HD2 and now u wanna swap it?
keep HD2. Its great, and so many possibilities. U must know what ur doing, tho (kindof)
Also, his link for donation is everywhere. 'DONATE' 'DONATE TO ME' 'If you like my work buy me a beer'
haha..oh yes missed the donate button..
im a bit sick of the winmo set up... it's just abit too fiddly with soo many settings to mess with..plus the handset gets hot too quickly recently and turns off, vibrates when i turn it on and freezes... need to get rid before it gets worse.. cant be bothered with the hassle.... besides.. i like the android phones..so ill go back to them...
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
aminuli said:
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
Click to expand...
Click to collapse
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
fred_up said:
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
Click to expand...
Click to collapse
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
aminuli said:
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
Click to expand...
Click to collapse
Assuming, from your icons, that the HD2 is locked to O2; therefore you should be able to download the O2 1.72 ROM (no HSPL required) and it will not invalidate your warranty.
nope thats just what tariff i am using. . .Ive been looking around and now im qutie confused i thought the process for having android on the htc was literally
Download a hspl and install - reset
Download a radio and install - reset
Run CLCARD.EXE then HARET.EXE and presto were in android, now unless something has changed is this right because im about to.
Download hspl3 and install - reset
Download radio and install - reset
Download a ROM and install and - reset
now is this the neccessary steps or am i about to mess up my phone again =.=
It would be helpful to know which ROM, RADIO and SPL you already have.
As for running Android, all that is pre-required is that you have the minimum .50 RADIO (it should be specified in the Android ROM's page). Although flashing the newest RADIO (2.15.50.14) won't do any harm.
Although I am with T-Mobile UK, I have the HTC 1.66WWE ROM, 2.15.50.14 RADIO and 1.66HSPL (via HSPL2). I downloaded an Android version and installed it on the SD Card. It works fine. Since I only tried it a couple of times, I can say that it boots and generally works. But I prefer WimMo.
SHIK1 said:
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
Click to expand...
Click to collapse
If you want android only (wich i would), yes swap it.
done... galaxy is awesome..so beautiful...quiality samsung os + android
never ever getting a winmo phone again ..had 3.. all fiddley beyond belief...
Good day everybody,
I'm sorry if I make it long to describe my problem, but would someone please help me in this because there is no place else to go to have my phone fixed
I have a T-Mobile HD2 where it has a problem and I can't fix it.
The problem starts from the early first days with starting the iGO Navigation program.
Whenever I start the iGO, the phone power off
at the beginning, I thought that the problem is from the navigation program.....but....
After that, it got bigger and whenever I start the phone and try to touch anything on the screen it hangs up and power off again.
Also, sometimes I have to wait more than 15 minutes to start the phone again, and also it power off as usual sometimes the phone got stick on the pink/white "Stick Together" Logo
I give the phone to my friend and he tried to fix but he couldn't
So he gave me the phone back always turning on to the bootloader (Tri-Color) screen.
I tried to HSPL it, at the beginning I couldn't because the "Qualcomm CDMA Technologies MSM Driver" was not installed, and it took me forever to get it and get my phone ActiveSync. With windows 7.
Finally, I managed to select the SPL-2.08.0000 through HSPL3 and the situation changed back to the same old situation where my phone sometimes start and stick on the pink/white "Stick Together" Logo, an only twice boots up to windows and start everything normally, but whenever I turn on the camera it power off again
I tried yesterday to flash a new ROM, but I didn't succeed
Right now, the info at the bootloader is these:
PB81120 HX-B3
SPL-2.08.000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X40
I hope to find a solution to my phone problem in here.
Would someone help me please in this problem
Best Regards,
Just an update on my problem, I tried to flash this new ROM
TMOUS ⁞ ROM ⁞ CR192 DESIRE HD v6.5.3.0.9 beta Released ⁞ Build 23152 ⁞ 18th Jan ⌡
http://forum.xda-developers.com/showthread.php?t=791303
using this procedures and got stuck on this;
- I turned of the Anti-Viruse.
- I connected the phone by USB cable on bootloader mode (Tri-Color) screen and make sure the phone appears under the USB devices connected to my PC.
- I run the RRU.EXE file in the ROM I downloaded and follow the procedures.
- I tried and download the CustomRRU.EXE and put it in the ROM Folder and still the same
I hit next and my phone turns to black with HTC written in white color and under it is the progress bar indicating ( 0 % ) of progress then it says to wait 10 minutes.....later on .... the RRU.EXE programs ended with update error [262] this error on the attached
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The strange thing is that when it comes to the update part it says update from: image version ( no thing under it ) to: image version ( 3.14.51.1)
So I tried to turn on the phone ad try to connect the phone when windows is up and running ( it doesn't happen quiet a lot to get windows running) and the phone turn off entering the bootloader screen (Tri-Color) the into the progress black screen with htc logo, but still the same problem
This time I got an image version number on the from field, but still the same
would someone help me please
Does it still say SPL 2.08.0000 in the bootloader?
Well, then you don´t have HSPL and can´t flash another ROM than the original.
Maybe re-try to install 2.08.HSPL instead of SPL 2.08.0000.
tictac0566 said:
Does it still say SPL 2.08.0000 in the bootloader?
Well, then you don´t have HSPL and can´t flash another ROM than the original.
Maybe re-try to install 2.08.HSPL instead of SPL 2.08.0000.
Click to expand...
Click to collapse
yes it does, but I was able to select only this SPL when I used HSPL3, and I got the screen in my phone saying "We hacked it"
Anyhow, I will try to select the 2.08 HSPL again
Would you please specify more
thanks for your help
WoooooooooooW man, thanks brother you just made my day
I managed to flash it wth no problems, my phone comes back to life again
I didn't think flashing is very easy like this, I was afraid to brick my phone
thanks again for your help and support
Regards
Oh god, I'm trying on my friend phone now which has the same issue and I'm stuck on the HSPL3 where the phone always disconnect from USB, I know it by hearing the disconnect beep in windows, after that I got this error on HSPL3
The phone stays on bootloader (Tri-Color) screen, and shows USB but the truth is that the phone is already disconnected from the PC.
yesterday I was able to HSPL this phone but I selected SPL 2.08.0000 instead of 2.08 HSPL
I waited 10 mins and power up the phone and HSPL it without problem, but now another problem came out........... while the phone is flashing the new ROM, the status bar reaches only 29 % then the phone disconnected from USB by itself leaving me with ROM error [284]
Any help or hint please
I assume you run your PC with Windows 7?
When you start the second HD2 normally, is it seen in Windows Mobile Device Center?
If this is the case, the driver should be ok (it worked with your device, too).
Maybe try this: Disconnect the second HD2, put it manually into bootloader mode (turn off, then push volume down and power on simultaneously until multi-color screen appears), then re-connect it to the PC, USB should appear, then launch HSPL3.exe
Another simple trick is to try another USB port (definitely avoid hubs), or another USB cable.
tictac0566 said:
I assume you run your PC with Windows 7?
When you start the second HD2 normally, is it seen in Windows Mobile Device Center?
If this is the case, the driver should be ok (it worked with your device, too).
Maybe try this: Disconnect the second HD2, put it manually into bootloader mode (turn off, then push volume down and power on simultaneously until multi-color screen appears), then re-connect it to the PC, USB should appear, then launch HSPL3.exe
Another simple trick is to try another USB port (definitely avoid hubs), or another USB cable.
Click to expand...
Click to collapse
Thanks brother for passing by again
Yes, I'm running windows 7
I had problems at the beginning to ActiveSync my phone because I couldn't get the phone to be discovered by my PC due to the "Qualcomm CDMA Technologies MSM Driver" was not on my PC.
I managed to get the driver and downloaded Windows Mobile Device Center 6.1.
In the first phone, yes the WMDC 6.1 recognized the phone and I saw it connected at the program.
The other phone, I can't remember because I didn't open it! but I'm sure the phone was connected to the PC because I can see it under the connected USB devices.
Anyhow, I'm afraid that there is a problem with the phone hardware
The reason is because I charged the phone and left it for 30 mins, I tried to flash another ROM by CustomRUU.EXE and I succeeded.
but still when I turn on the phone, the phone get stuck on the first HTC logo screen
I also tried to flash the ROM from the sdCard and I succeeded but still same stuck problem
Also when I compared between the two phones when they boot up I noticed this;
- The first phone when booting it shows lines in red colors at the lower left corner of the screen.
- The second phone when booting shows nothing like this
Last thing I know is that the radio on the second phone is 2.08 and the first phone is 2.10
So I HSPL the leatest Radio whihc is (( Radio Leo 2.15.50.14 )) and still the same problem
Could anyone give me a hand on this problem
OK, so the first phone still running?
Can you put the second one into the bootloader mode and list what you see there?
Can you force a hard reset? What is the behavior of the device if you do so? While flashing (USB), did you try without SD card in (this sometimes makes problems), or even without SIM card, or even both cards taken out?
An HD2 which runs normally shows you some more more data in the lower left corner in the white HTC startup screen, incl. Radio ROM version. If there is nothing, it could be a hint that no ROM and/or no Radio ROM was flashed, eg. you got a bad flash.
Last, but not least, which ROM did you try to flash, the stock ROM?
tictac0566 said:
OK, so the first phone still running?
Can you put the second one into the bootloader mode and list what you see there?
Can you force a hard reset? What is the behavior of the device if you do so? While flashing (USB), did you try without SD card in (this sometimes makes problems), or even without SIM card, or even both cards taken out?
An HD2 which runs normally shows you some more more data in the lower left corner in the white HTC startup screen, incl. Radio ROM version. If there is nothing, it could be a hint that no ROM and/or no Radio ROM was flashed, eg. you got a bad flash.
Last, but not least, which ROM did you try to flash, the stock ROM?
Click to expand...
Click to collapse
--------------------------------------------------
Yes, the first phone is running without any problems.
--------------------------------------------------
for the Second phone;
- Yes, I can put the phone into the bootloader mode and it shows:
PB1120 HX-B3
SPL-2.08 HSPL 8G XE
0X05
CotullaHSPL 0X40
(Which is the same as the first phone that's working)
- What's the Hard Rest, do you mean the small yellow button??
- Yes, I tried flashing the phone while connected to my PC through USB and I took out the SIM and sdCard.
- You are absolutely right, I know that normal HD2 shows 3 Red lines in the corner while starting up including the Radio version.
Before I flash the phone, somtimes those line appears while booting up and the phone starts normally into the stock Windows 6.5 Pro, but after opening applications or starting navigating in the menus it powers off.
After that, when I power on again, the phone was getting stuck on the T-Mobile whiet/pink logo "Stick Together" and no thing appears in the lower left corner.
What's confusing me right now is that: "athough I was successfully on flashing a new Radio and ROM, this phone is not showing anything while booting up except the HTC logo and stuck on it "
I'm thinking now to try the "T-Mobile_HD2_MR_Software_3.14.531.1" which is the leatest update for the HD2 from T-mobile website.
I will be very appreciated if someone can help me with this problem.
Thanks
Yeah, the "white screen of death", eg. stuck in the white bootscreen, is often a hint that the Radio ROM does not match/is incompatible.
As a matter of fact, if you have the 3.xx ROM on your device, it won´t work properly with 2.08.HSPL, maybe that´s the reason for your issues. You need SPL 3.03 with this ROM.
"Hard Reset" means the complete reset, deleting the memory (turn off device, push both vol. up and vol. down at the same time, then briefly the power on button, follow the on-screen instructions to reset the device). Please note that this won´t erase the SPL though, in case you´ve got the incompatible combination.
Flashing the stock ROM is a good guess, worth a try. Try it with the SD card method, this will erase HSPL, too, just in case this had a bad flash, too. Or, in case you had the 3.xx ROM with 2.08.HSPL, this will be corrected, too.
If this would work, you could start from scratch.
tictac0566 said:
Yeah, the "white screen of death", eg. stuck in the white bootscreen, is often a hint that the Radio ROM does not match/is incompatible.
As a matter of fact, if you have the 3.xx ROM on your device, it won´t work properly with 2.08.HSPL, maybe that´s the reason for your issues. You need SPL 3.03 with this ROM.
"Hard Reset" means the complete reset, deleting the memory (turn off device, push both vol. up and vol. down at the same time, then briefly the power on button, follow the on-screen instructions to reset the device). Please note that this won´t erase the SPL though, in case you´ve got the incompatible combination.
Flashing the stock ROM is a good guess, worth a try. Try it with the SD card method, this will erase HSPL, too, just in case this had a bad flash, too. Or, in case you had the 3.xx ROM with 2.08.HSPL, this will be corrected, too.
If this would work, you could start from scratch.
Click to expand...
Click to collapse
Thanks for the hints, but unfortunatly I still have ths same issue (screen of death)
Today, I was able to power up the phone twice with the new ROM and I checked the software information and I found out that the radio is already installed correctly which is (2.15.50.14) but when I turn the camera and took a picture, the phone freezes and power off aagain, after that I returnd to the screen of death again
I tried the method of hard reset, same problem.
I also flash my phone with the custom ROM from T-Mobile using the RRU.EXE, but still stuck on the screen of death after flashing
Anyhow, one new thing happend to me today before doing any of those steps, and I believe it happend after I flash the new radio
- Now, when I power up the phone it vibrate the normal start up vibration then it goes to the booting screen, after 5 secondes it gives me a 7 broken vibrations
- Some times it give me the 7 broken vibrations directly with the start up and the phone's screen stays black
- And some times it doesn't give me the 7 broken vibration
like the phone is giving me an error code
Anybody have an idea about this strange problem !!!!
Please note that flashing through USB won´t erase and replace a defective SPL. This only works if you use the SD card method.
Concerning the new discoveries:
Now that´s something completely new to me... never heard anything like this. Except maybe non-stop vibration phenomenons...
Maybe you could open a new thread with that very specific problem...
I still get the feeling that you´re getting bad flash results, but maybe we´ve got a worst case here: Defective hardware.
If you´ve already put the original stock ROM (incl. SPL) on the device, maybe the best choice is to send the critical unit to a service center.
Still, if not yet done, I´d try to flash the stock ROM via SD card, worth a try.
tictac0566 said:
Please note that flashing through USB won´t erase and replace a defective SPL. This only works if you use the SD card method.
Concerning the new discoveries:
Now that´s something completely new to me... never heard anything like this. Except maybe non-stop vibration phenomenons...
Maybe you could open a new thread with that very specific problem...
I still get the feeling that you´re getting bad flash results, but maybe we´ve got a worst case here: Defective hardware.
If you´ve already put the original stock ROM (incl. SPL) on the device, maybe the best choice is to send the critical unit to a service center.
Still, if not yet done, I´d try to flash the stock ROM via SD card, worth a try.
Click to expand...
Click to collapse
I can't find the stock "nbh" rom so i flash it from the sdCard
all what I have is the EXE file that has the whole thing to flash the phone through USB which I downloaded from T-Mobile website
Can you help me please in finding the t-mobile stock rom ???
Well, you have all you need!
You can actually extract the RUU.exe file.
Use any decompression software (WinRar, ZipIt, whatever) to extract the files, rename the nbh file to leoimg.nbh, put it onto the freshly formatted (FAT32) SD card, and there you go.
tictac0566 said:
Well, you have all you need!
You can actually extract the RUU.exe file.
Use any decompression software (WinRar, ZipIt, whatever) to extract the files, rename the nbh file to leoimg.nbh, put it onto the freshly formatted (FAT32) SD card, and there you go.
Click to expand...
Click to collapse
Aha, I didn't know that, thanks
Anyhow, I tried that and took me forever th flash this ROM
when I put the "LEOIMG.nbh" file into the memory card and started the booting at bootloader, everythings works smooth like I'm flashing a new ROM wheer I got the phone's screen showing:
LEOIMG.nbh -
RADIO_V2 -
RUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
So I assumed that the phones starts to flash the ROM normally, at the begenning it got stuck while flashing the RADIO where the status bar stuck almost on 25%. I had to rest the phone couple of times, then try to flash again.
I managed to flash the phone with the Stock T-Mobile ROM twice, but still when booting it get stuck on the "White Screen of Death"!!!!
The phone still sometimes giving me the strange 7 broken vibration when starting.
Any new ideas
Nah, I don´t have any ideas anymore.
There was a thread with some guys having the same phenomenon with the vibration pattern, but the problem was never solved.
Since you tried everything now, maybe you should send your device to a service center. And after you flashed the stock ROM, warranty won´t be void (except the time is over).
tictac0566 said:
Nah, I don´t have any ideas anymore.
There was a thread with some guys having the same phenomenon with the vibration pattern, but the problem was never solved.
Since you tried everything now, maybe you should send your device to a service center. And after you flashed the stock ROM, warranty won´t be void (except the time is over).
Click to expand...
Click to collapse
Thanks for all the information brother, and yes that what said to my friend, now it's time to use the warranty
what i think is going on is the RAM got defected, where sometime it can handel processing the data and that's why the phone sometimesstarts up normally,
and somtimes it can't because the RAM is turning into fully volatile all the time and can't process the data anymore.
That's the only thing came to my mind could describe this problem.
Thanks again and I wish they givemy friend a new phone
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset
Hi,
I just bought a HD2 secondhand from an online shop which was promised to me to be in working condition.
Tried booting it up and it was stuck at the Windows Mobile screen.
Managed to flash HSPL 2.08 (after 3-4 tries?) but when I tried to flash the radio, the tool indicated the current image was... nothing.
It simply didn't display any image version, I thought that was a little strange but I tried flashing 2.07.51.22.2 on it anyways.
A few other versions later (2.12.50.02.2, 2.14.50.02.2, 2.08.50.05, 2.15.50.14) and still no luck (it usually fails around 96% when I do it via USB and its stuck at nearly maximum when I try an SD flash)
Not entirely sure where it came from, but it is HTC branded T8585.
I've tried a Task 29 (though LEO Advanced RUU) which was successful. But still no luck with the radio.
Phone won't boot up most of the time - but I can still enter the bootloader.
Various screens I've got so far:
HTC screen (white background)
Screen with exclamation mark and triangle
Screen that says software update has failed
Sooo... any idea if the phone is salvageable? I've been looking around the forum but I've tried most of the above and don't know what else I can do.
Cheers.
Edit: Doesn't actually say FAIL when I use an SD. It just gets stuck at like 99/100% (full bar) with the words Update In Progress... and never progresses.