Ok in the galaxy s2. If you go to settings, display, then at the bottom, you have horizontal calibration and gyro sensor calibration.
If you choose horizontal calibration you get a little test thing with the dot in the middle and it moves as you tilt the device.
When I go to gyro sensor calibration the dot just stays in the middle and does not move. Is this normal ?
Can someone try the above please
yep i tried this before, same here, but i think it's normal
If you look two different calibrations .
jje
I know, but shouldn't the dot move when you tilt the device. I thought thats what the gyro does
Do it while you are in the car (as a passenger), and see if that move when the car accelerates or slows down
Why would one calibration act the same as another .
jje
I am having the same problem the gyro calibration was working till i click on calibrate as soon as i clicked it i no longer see the ball moving :/ tried wiping and everything nothing worked.
Mine doesn't move either.
I could of sworn mine was moving last time I checked! Very strange..
I cant get mine to move either.
Maybe this might help.
http://en.wikipedia.org/wiki/Gyroscope
the gyro problem is annoying .. every app just turn into landscape mode :/
hope someone fix it fast ;/
sorrowuk said:
Ok in the galaxy s2. If you go to settings, display, then at the bottom, you have horizontal calibration and gyro sensor calibration.
If you choose horizontal calibration you get a little test thing with the dot in the middle and it moves as you tilt the device.
When I go to gyro sensor calibration the dot just stays in the middle and does not move. Is this normal ?
Can someone try the above please
Click to expand...
Click to collapse
Before I root my Samsung, can you tell me what rom you have installed or what you did last?
Thx
Morichio said:
Before I root my Samsung, can you tell me what rom you have installed or what you did last?
Thx
Click to expand...
Click to collapse
Lite'ning rom , it was working untill i clicked on calibrate after clicking it it got stuck :/ well that me i don't know about the OP.
I have the same problem (indications for gyro callibration) but also a magnetic sensor problem (see this http://forum.xda-developers.com/showthread.php?t=1111355 threat)
I used an app called sensor test / plot which shows problems with the magnetic sensor and orientation.
Anyone having the same problem?
Try an App called GPS status, it displays the output of all the GS2s sensors on one screen, including satellites, compass, gyro and accelerometer, at least you can reassure yourselves that the various sensors are actually working
erikcornelisse said:
I have the same problem (indications for gyro callibration) but also a magnetic sensor problem (see this http://forum.xda-developers.com/showthread.php?t=1111355 threat)
I used an app called sensor test / plot which shows problems with the magnetic sensor and orientation.
Anyone having the same problem?
Click to expand...
Click to collapse
All the numbers move for me using the sensor test/plot app.
in sensor test everything is working but the phone just stay in landscape mode .. thats the problem that i have.
You can try *#0*# on your dialler and then use the Sensor test and check if everything is all right.
tested on *#0*#it says its working fine as well .. :/
Recently my magnetic sensor did not work. Yesterday suddenly it came to life exept I don't trust it.
Just to check if my sensors are OK I would like to compare some data. I use *#0*# and the SENSOR
My readings are (when on table):
ACCELEROMETER Sensor Raw Data
x:-10/10 y:-20/-40 z:3030/3060
Gyroscope Sensor
Y:-0.01/-1.00 P:0.01/0.80 R:0.01/0.90
Gyro self test OK, Graph shows normal plot with rotation around all axes)
Magnetic Sensor
Magnetic: x:-45 y:-600 z:1086 (values change with orientation but stay around the same range, exept for the z value, it stays at 1086.48 contantly)
Azimuth: 176 (changes just +/-2 degr with rotation and +/- 20 degr with roll)
Pitch: 0,050 (changes normal with pitch)
Roll: 0,40 (changes normal with roll)
Little compass indicates South (red line towards you) and does not change with rotation (just +/- 20 degr with roll). It also says need for calibration and the number 0.
I know values will be different with everyone but should be around the same range. I have values (Accelerometer) in the 10 / 30 and 3000 range depending on de axis. Same with the Magnetic sensor 50 /600 and 1080 range.
As the magnetic z-axis value is stuck I expect a faulty sensor.
the test is all good to me but the image test it failed to move from landscape to normal. hope someone can help :/
Related
So I've used the search bar and google
there are 4 circles at top
1. Ambient Light sensor
2. LED notification lights
3. ???
4. Proximity Sensor
so whats in between the earpiece and proximity sensor
also why dont apps recognize the ALS? I've used android sensor box, androsensors and my android sensors but still nothing. Though auto brightness works. I know, I move my finger over it and the screen gets dim
z50j said:
So I've used the search bar and google
there are 4 circles at top
1. Ambient Light sensor
2. LED notification lights
3. ???
4. Proximity Sensor
so whats in between the earpiece and proximity sensor
also why dont apps recognize the ALS? I've used android sensor box, androsensors and my android sensors but still nothing. Though auto brightness works. I know, I move my finger over it and the screen gets dim
Click to expand...
Click to collapse
The last 2 sensors are for proximity i guess, cause even on my mini pro i have 2 circles for proximity. In the stock rom, it is never detected, its on by default. In roms like cm10, CM10.1 etc. you can choose whether to use it or not, change the different levels etc.
Well in mini pro its
Led, ambient sensor, camera, proximity.
Tbh, I think I have seen two dots instead of one for sensor. (Really hard to see)
Regards
N
mnishamk said:
Well in mini pro its
Led, ambient sensor, camera, proximity.
Tbh, I think I have seen two dots instead of one for sensor. (Really hard to see)
Regards
N
Click to expand...
Click to collapse
Yep there are two sensors for proximity.
why are there 2 sensors for proximity? using the sensor apps I've noticed that only that the right most works the 3rd one doesnt really do anything when i cover it. but it works so I'm fine with that
but how come the apps dont detect the ambient light sensor? that too is obviously working because the screen dims when i hover over it
Try using the service menu and see if it works there
Regards
N
mnishamk said:
Try using the service menu and see if it works there
Regards
N
Click to expand...
Click to collapse
I did, it doesnt
Hello,
Has anyone noticed a promixity (maybe ambient light) sensor issue? Often (more in the dark) I can see a weak red light blinking right where there is the proximity sensor(it stays there if automatic brightness is on). I tried disabling and closing one app per time but it seems more like a software bug...
Anyone else?
Sony Xperia X F5121
Hello ! Yes! (sorry for my language I'm French).
Tonight, after charging my phone at 100%, I have seen a red little light in the '' capter '' a the right (for automatic luminosity I think). It was a big bug who during ~ 30 minutes. And I have lost 20% of battery, I think, cause to this bug.. Do you already have the bug today?
daddu97 said:
Hello,
Has anyone noticed a promixity (maybe ambient light) sensor issue? Often (more in the dark) I can see a weak red light blinking right where there is the proximity sensor(it stays there if automatic brightness is on). I tried disabling and closing one app per time but it seems more like a software bug...
Anyone else?
Sony Xperia X F5121
Click to expand...
Click to collapse
I've een it also sometimes but i've no idea what it is
me too,but i've noticed that only blinks when its recieveing data when changing from wifi to 4g and viceversa,when its done,it doesnt blink anymore.
Does anyone have any idea for this problem please ? :'(
daddu97 said:
Hello,
Has anyone noticed a promixity (maybe ambient light) sensor issue? Often (more in the dark) I can see a weak red light blinking right where there is the proximity sensor(it stays there if automatic brightness is on). I tried disabling and closing one app per time but it seems more like a software bug...
Anyone else?
Sony Xperia X F5121
Click to expand...
Click to collapse
@Mr High Tech @kistigun @kalel29
Are you kidding me guys? :laugh::laugh:
It's not a red light.... It's barely visible because it's an Infrared Sensor Infrared light is usually visible only in very dark conditions.
Hint that will make your day - when it's dark and you barely see it, try pointing a camera at it! It flashes white now, doesn't it.
Sebi673 said:
@Mr High Tech @kistigun @kalel29
Are you kidding me guys? :laugh::laugh:
It's not a red light.... It's barely visible because it's an Infrared Sensor Infrared light is usually visible only in very dark conditions.
Hint that will make your day - when it's dark and you barely see it, try pointing a camera at it! It flashes white now, doesn't it.
Click to expand...
Click to collapse
more than wanting to know what it is, i think they want to understand why; why does the proximity sensor stay on?
i had this question too, before updating to the latest firmware (.292). after that, it seems the "problem" doesn't occur anymore, but i'm not that sure. i'll have to double check.
however, do some of you use "Smart backlight control" feature?
carlo93 said:
more than wanting to know what it is, i think they want to understand why; why does the proximity sensor stay on?
i had this question too, before updating to the latest firmware (.292). after that, it seems the "problem" doesn't occur anymore, but i'm not that sure. i'll have to double check.
however, do some of you use "Smart backlight control" feature?
Click to expand...
Click to collapse
Smart backlight control makes use of the accelerometer of the phone. Keeps the screen on by detecting movement. Neat feature.
Smart call handling on the other hand uses the proximity sensor. Also the style cover preinstalled software. And of course Call handling uses the proximity sensor.
I'm using a modified version of Gravity Screen for pocket mode. Proximity sensor flashes all the time in order to turn the screen on and off when it's in or out of the pocket. Also I use the proximity sensor so that the screen won't turn on when it's in the pocket - like when a call comes in and I don't want to accidentally answer.
One thing you should know about the proximity sensor is that it uses a crazy low amount of power (0.18mA). Now the software that uses the sensor might have many wakelocks but we also need features so it's a small price to pay haha. Also if you're planing on using gravity screen (which is a cool app), you can always add a on/off widget.
There's really nothing to worry about - none of those features/apps I mentioned register on power consumption.
Hi,
after replacing the battery of my SGS6 Edge some sensors are not working.
1. Light sensor is not working when the brightness is set to automatic
2. Gyroscope sensor is not working when screen rotates
maybe other sensors are not working properly too.
I already tried to restart the phone but there is no effect.
On the hidden service menu the the light all sensors seems to work.
The light sensor is working 100% - when I cover it, it shows "0 lux"
The Gyroscope Sensor is working too, but what does the "OIS GYRO" mean? The value on X and Y does not change.
It's my business phone with a lot of data and apps. Thats the reason why I still don't try a hard reset.
Is there a solution whithout resetting the phone?
EDIT: Gyroscope seems to work... strange. But light sensor is still not working. Brightness does not change.
i've similar issue with mine, but I don't know if battery was changed before was given to me, I tried many roms nougat and marshmallow based, but the problem persist. with automatic brightness on, if I scroll the bar, it doesn't change anithing, I've to disable the automatism
Hi!
Can anyone tell me how I get the pressure sensor to get recognized? All apps I tried so far say it's not there, but apparently the compass app from the stock ROM does display the pressure data. Does anyone have the stock pressure app? I'm running AEX.
Would a different kernel help for that?
Thanks!
Molvol said:
Hi!
Can anyone tell me how I get the pressure sensor to get recognized? All apps I tried so far say it's not there, but apparently the compass app from the stock ROM does display the pressure data. Does anyone have the stock pressure app? I'm running AEX.
Would a different kernel help for that?
Thanks!
Click to expand...
Click to collapse
What u mn??? Pressure app ???
Almost every cell phone has a pressure sensor, and the Redmi 5 plus apparently too. But it doesn't seem to work like in all other phones. There are many apps that can read this sensor and display it - barometer apps namely and other sensor-display apps. I haven't found one that works with my 5 plus.
I have only seen mentioned that the built in compass app does display a pressure, all apps I have tried do not display a correct value, most just say "no sensor".
Sorry
No pressure sens. in RN5. Compass works with magnetic sensor which detects magnetic field of Earth. Not atmospheric pressure. Pressure sensor is only in more expensive phones included
Hello... for some time now in my mia3 I have the problem that when I have a horizontal application either a game or the same youtobe on the screen it seems to go back to vertical mode and then horizontal.
I wonder if anyone would know why that is.
Thank you very much in advance.
It seems the sensors and system are not calibrated well enough to handle normal uses. It's overly sensitive to small angle changes. I find it switch the orientations back and forth automatically when it's put on the table from hand-held position.
I use this to set orientation for each app:
https://play.google.com/store/apps/details?id=jp.snowlife01.android.autorotatecontrolpro
It's not solving the problem, just sidestepping it.
CLS_phone said:
It seems the sensors and system are not calibrated well enough to handle normal uses. It's overly sensitive to small angle changes. I find it switch the orientations back and forth automatically when it's put on the table from hand-held position.
I use this to set orientation for each app:
https://play.google.com/store/apps/details?id=jp.snowlife01.android.autorotatecontrolpro
It's not solving the problem, just sidestepping it.
Click to expand...
Click to collapse
I will try. Thank you very much for the answer. I will also notify you if this partially solves the problem.
camilov said:
Hello... for some time now in my mia3 I have the problem that when I have a horizontal application either a game or the same youtobe on the screen it seems to go back to vertical mode and then horizontal.
I wonder if anyone would know why that is.
Thank you very much in advance.
Click to expand...
Click to collapse
Try to recalibrate gyroscope sensor, type in dialer *#*#6484#*#* and go to gyroscope section, calibrate. Find flat smooth surface and follow the instructions. It helped me when my phone didn't catch that I'm holding phone in horizontal position. After calibration it's perfect.
_mysiak_ said:
Try to recalibrate gyroscope sensor, type in dialer *#*#6484#*#* and go to gyroscope section, calibrate. Find flat smooth surface and follow the instructions. It helped me when my phone didn't catch that I'm holding phone in horizontal position. After calibration it's perfect.
Click to expand...
Click to collapse
That was the first thing I did, as well as trying out many applications, and it's still the same.
Thank you very much.
Maybe there's something about how you're handling the phone.
Say, when putting the phone to the desktop by left hand, the phone would land on the surface by its (long) right side at the moment it leaves the palm. The screen face is tilted to the right somewhat. This is enough to trigger the auto rotation and irritating.
If the system can learn the habit, predict actual intention of the user and give it some delay before triggering the auto rotation, then the display can stay more stable. But I don't know where to set such trigger timing or delay etc.
Later I learn to touch down at the top (short) side of the phone first. Or use that aforementioned app to disable auto rotation on some apps, like browser.
BTW, my gyroscope is calibrated well, too.