[Q] FM Transmitter Built-In to Vibrant? - Vibrant Q&A, Help & Troubleshooting

Has anyone looked into this whole thing about there being FM Transmitter/Receivers being built into most Android phones(including ours)?
I was reading this article ==> http://forum.xda-developers.com/showthread.php?t=1092719 and I was curious. I wonder if I could use this to broadcast my music from my phone to my FM radio in my old car...
Any thoughts? (and yes I did search)

The vibrant doesn't have a functioning receiving FM module, let alone a transmitting FM module. Our hardware is missing a few key components to have a working FM tuner.
Sent from my SGH-T959 using XDA App

Ok. So what prompted this question was my coworker has an Epic and has a FM Radio hack on hisphone. Thought the phones were similar enough but then the Epic is the oddball out of the Galaxies.
Thanks for the answer

Related

Working FM Radio app?

Installed the following app from http://forum.xda-developers.com/showpost.php?p=11332081&postcount=1 but it just hangs with the message of "FM Radio being launched, please wait..."
Looking for an app that uses the Vibrant's built-in FM tuner. If it matters, I'm running Trigger 2.7 ROM.
Thanks for the link.
AFAIK, Vibrant has no built-in FM tuner. I will be ecstatic if someone proves I am wrong!
Try tunein radio found on the market for free. I'm streaming now, works great for me but u need a decent data signal so it doesn't cut out.
Sent from my Vibrant running trigger
Bluejay913 said:
Try tunein radio found on the market for free. I'm streaming now, works great for me but u need a decent data signal so it doesn't cut out.
Sent from my Vibrant running trigger
Click to expand...
Click to collapse
+1. Works flawlessly for me.
Bluejay913 said:
Try tunein radio found on the market for free. I'm streaming now, works great for me but u need a decent data signal so it doesn't cut out.
Sent from my Vibrant running trigger
Click to expand...
Click to collapse
Unfortunately, that app uses your data connection. Was hoping for something that uses the built-in FM tuner. If it exists at all.
jdancer said:
Unfortunately, that app uses your data connection. Was hoping for something that uses the built-in FM tuner. If it exists at all.
Click to expand...
Click to collapse
Someone correct me if I'm wrong but I don't think that we have this built in.
Sent from my Vibrant running trigger
There is no built in FM tuner.
creator2456 said:
There is no built in FM tuner.
Click to expand...
Click to collapse
^this.
What people are getting confused with, is iirc the vibrant has bit and pieces of fm tuner hardware still left in, but it doesn't have everything needed to get a working fm tuner.

FM Radio on NC?

So with the release of CM7 has there been any work done into using the FM Radio that's on the NC's wireless radio's chip?
NC is totally awesome before CM7 and it's just astounding now but FM Radio and proxy settings are the two last pieces of the puzzle that I need to make it absolutely perfect.
The FM chip isn't connected to an antenna so it won't work. Only the bluetooth is connected to an antenna hence it working in CM7.
Been using TuneIn Radio just fine. I enjoy listening to the radio as I'm reading. also you may what to try Pandora Radio.
oh, I should mention that you'll need a wifi connection for the internet radios.

FM Radio app RDS support (Spirit)

I've released version 2.0.2 of the "Spirit FM Radio" app. See my sig for the details post.
Best support is for CM7 ROMs with the CM FM app. My app supports RDS data on TI FM chips now, and more basic functionality on Broadcom FM chips. Works well on my HTC Legend and Desire HD, and I think should also work on Click/Tattoo.
I tested with the 240x320 resolution on an emulator.
works great 100% thanks, though it could do with a better GUI
Works perfect on my HTC Tattoo/Click with CM7. The GUI should be polished.
The HTC radio app could be a good reference.
Thanks!
bluetooth??
great app, but why do you need my bluetooth on?
please remove this feature or let me select it in a menù.
SycoLTH said:
great app, but why do you need my bluetooth on?
please remove this feature or let me select it in a menù.
Click to expand...
Click to collapse
radio is integreted on bt microchip, than when you active radio, you must active also bt
This is the right app I am looking for! Why should FM apps stick to headset? Now it is freedom from headset, only thing you need is something as antenna.
where can i find this app -??
kriout said:
where can i find this app -??
Click to expand...
Click to collapse
look at this thread http://forum.xda-developers.com/showthread.php?p=13379669

Spirit FM radio App and Cyanogenmod 7.2

I had a couple of questions about using Spirit FM Radio app on CM 7.2. And I would like to know in detail about it.
Firstly, When I ran the Spirit app on CM 7.2 i noticed that it doesn't switch on the Bluetooth. Does that mean that it uses the internal Broad com FM chip instead of Bluetooth to receive FM transmissions just like in the LG stock FM radio app?
Will the Spirit FM app still run properly if I UN-install the CM 7.2 Stock FM app? Or does it need the CM 7.2 Stock FM app to run properly?
In the setting of the app, within audio, I saw various options like cyanogen Mod, LG, lge-msm7x27,etc. Even tough i didn't see any difference in quality while going through different options. Which would be the ideal option for us and What do these options do?
CM9 hasn't got a radio am I right? (Btw I'm new to the forum I couldn't find a topic to write this I'm sorry
What phone are you using?
When Bluetooth is enabled FM is enabled too because they locate at the same chip. It's the easiest way to enable FM and so is CM radio doing. Spirit FM (and stock LG) does it little bit harder by only enabling FM thus saving some starting time and battery (battery part is not a 100% fact though, only my own speculation).
You can remove CM radio, it is not needed.
Recommended method by author in Spirit is CyanogenMod. I don't know exactly what are the differences between different methods but stick with CyanogenMod.
Spirit FM does use Bluetooth, only the icons aren't changed that's all.
Sent from my LG-P500 using xda premium
4silvertooth said:
Spirit FM does use Bluetooth, only the icons aren't changed that's all.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I might be wrong but if Bluetooth is turned on i see no indication, not only in status bar, settings, no device discovers it (visible), i think i need an app to check the components...
Will check back whit the answer
Edit: It dose use bluetooth
moby_test said:
I might be wrong but if Bluetooth is turned on i see no indication, not only in status bar, settings, no device discovers it (visible), i think i need an app to check the components...
Will check back whit the answer
Edit: It dose use bluetooth
Click to expand...
Click to collapse
How did u finally come to that conclusion that it does use Bluetooth? And if it does... Does that mean that there is no big difference in the way Spirit, Cyanogen mod and LG FM radio app works?
I have my own thread for questions, 1st link in my sig: http://forum.xda-developers.com/showthread.php?p=13379669
And I respond to emails and PMs, but sometimes respond on my thread for all to benefit. Or just let me know a thread's been opened...
See below for answers:
sweettaniyaa said:
Firstly, When I ran the Spirit app on CM 7.2 i noticed that it doesn't switch on the Bluetooth. Does that mean that it uses the internal Broad com FM chip instead of Bluetooth to receive FM transmissions just like in the LG stock FM radio app?
Will the Spirit FM app still run properly if I UN-install the CM 7.2 Stock FM app? Or does it need the CM 7.2 Stock FM app to run properly?
In the setting of the app, within audio, I saw various options like cyanogen Mod, LG, lge-msm7x27,etc. Even tough i didn't see any difference in quality while going through different options. Which would be the ideal option for us and What do these options do?
Click to expand...
Click to collapse
Copied on my thread, because I did a lot of thinking and typing...
Yes you can remove the CM FM app.
On CM7, the default CyanogenMod audio method is generally best. It's the same method the CM7 FM app uses, so it's the most likely to work well, especially when dealing with things like phone calls coming in when FM is on.
If a CM ROM for any phone has a CM FM app, this method should work, but unfortunately that's not yet the case with CM9 ROMs. so low level methods are needed for now on CM9, and there are often issues, and many CM9 ROMs just don't support FM audio routing yet, or I haven't figured them out.
Re: Bluetooth: my app has many ways to access FM chips.
- The first method I supported was via Bluetooth (the HCI API), like the CM FM app. Like it, my app can run commands using the command line hcitool utility, and this is nice because my app can run without root/SU. But it's not too efficient, especially when using RDS where lots of data gets transferred.
- For better efficiency, with root, my app supports direct access to the HCI sockets, through a daemon, because apps don't have the privilege otherwise.
- But because many people were running stock or stock derived ROMs using the Broadcom proprietary BT stack, and I could find no way to send HCI commands with it, I created a "UART mode" that communicates directly with the Bluetooth/FM UART. The wireless part of Bluetooth is not switched on, which saves power. But this mode requires root (unless /dev/ttyHS0 or whatever is accessible from an app), and only works if BT is off.
- A new access method is available now on stock and stock derived ROMs that run the proprietary Broadcom BT stack and that supports the stock LG FM app. This can work on stock, unrooted devices. In this mode the characteristics of the stock FM stack are unavoidable, both positive and negative.
The Broadcom proprietary BT stack has a special mode where Bluetooth is considered off, but FM is on. This enables the Bluetooth HCI "UART" to provide a path to control the FM part of the chip.
- There are different device driver access methods used for dedicated FM chips not contained in a BT/FM combo chip, but those don't apply to the P500.
OK for SGA?
Can I use this FM radio app for my Samsung Galaxy Ace? I have Ice Cream Sunday ROM installed.
donzzy said:
Can I use this FM radio app for my Samsung Galaxy Ace? I have Ice Cream Sunday ROM installed.
Click to expand...
Click to collapse
Off-topic, and you should ask on my thread anyway, or check post 2 of my thread. Please don't respond here.
Canned response now:
The Simpsons taught me that among Hemingway's words of wisdom was:
“The shortest answer is doing the thing.”
IE, why don't you just try it ? It's free and only takes a minute or two I think.
There's even an intro that can be read and will give some useful information on configuration.
Then if you have trouble, you can come back, report it, and hope for an answer.
mikereidis said:
Copied on my thread, because I did a lot of thinking and typing...
Yes you can remove the CM FM app.
On CM7, the default CyanogenMod audio method is generally best. It's the same method the CM7 FM app uses, so it's the most likely to work well, especially when dealing with things like phone calls coming in when FM is on.
If a CM ROM for any phone has a CM FM app, this method should work, but unfortunately that's not yet the case with CM9 ROMs. so low level methods are needed for now on CM9, and there are often issues, and many CM9 ROMs just don't support FM audio routing yet, or I haven't figured them out.
Re: Bluetooth: my app has many ways to access FM chips.
- The first method I supported was via Bluetooth (the HCI API), like the CM FM app. Like it, my app can run commands using the command line hcitool utility, and this is nice because my app can run without root/SU. But it's not too efficient, especially when using RDS where lots of data gets transferred.
- For better efficiency, with root, my app supports direct access to the HCI sockets, through a daemon, because apps don't have the privilege otherwise.
- But because many people were running stock or stock derived ROMs using the Broadcom proprietary BT stack, and I could find no way to send HCI commands with it, I created a "UART mode" that communicates directly with the Bluetooth/FM UART. The wireless part of Bluetooth is not switched on, which saves power. But this mode requires root (unless /dev/ttyHS0 or whatever is accessible from an app), and only works if BT is off.
- A new access method is available now on stock and stock derived ROMs that run the proprietary Broadcom BT stack and that supports the stock LG FM app. This can work on stock, unrooted devices. In this mode the characteristics of the stock FM stack are unavoidable, both positive and negative.
The Broadcom proprietary BT stack has a special mode where Bluetooth is considered off, but FM is on. This enables the Bluetooth HCI "UART" to provide a path to control the FM part of the chip.
- There are different device driver access methods used for dedicated FM chips not contained in a BT/FM combo chip, but those don't apply to the P500.
Click to expand...
Click to collapse
Thank you for clearing it to me. But I don't know... something weird happened to me. I was using Spirit FM radio app whole day yesterday but the Blue-tooth icon never showed up. But today when tried the app again It has been showing the Blue-tooth icon. I don't get it. What changed? I tried re-booting and everything. Still the same.

FM radio app that uses the internal FM chip?

I have a Pumpkin 13-RQ0278E Android-based touchscreen car stereo.
Sometimes, I do not have a data connection so need to drop back to FM radio.
The built-in FM radio app is a bit poo.
What do people usually use?
My device is not supported by NextRadio and Spirit FM is £5.64, so I don't want to spend that kind of money if it's not very good.

Categories

Resources