SenseV7 1.2GHZ 1024*600 Resolution 7 in Capacitive Android 2.3
CPU telechips 8803 Cortex A8 1.0GHz (800+300MHz) GPU Mali-200 of 320mhz
OS Android 2.3 Flash 10.1
Memory 512 DDR2 Ram, 4GB Nandflash built in Extend Memory up to 32GB via micro sd card
Screen 7 in Capacitive Hi Resolution 1024*600px 16:9
Audio 2 speakers
3.5MM headphone jack
Super Cirrus audio coding chip
Supported Audio Formats: MP3, WMA, MP2, OGG,AAC,M4A, FLAC, APE,3GP, WAV
Video Support AVI（H.264、DIVX、DIVX、XVID）, rm，rmvb， MKV（H.264、DIVX、DIVX、XVID），WMV，MOV，MP4（.H.264、MPEG、DIVX、X
ID），DAT（VCD），VOB（DVD），PMP,MPEG，.MPG,， FLV（H.263，H.264），ASF ，TS， TP，3GP，MPG
Features and highlights
1024*600 Resolution on 7 in Capacitive multitouch screen
Android 2.2
Gsensor
1080p video
Hdmi out
USB port
Micro sd card reader
Dc in
Speaker
Supports USB mouse
Supports USB flash disk
Wi-Fi (802.11b/g/)
Slim body
3.5mm audio jack
USB 2.0
Dimensions
193*115*14.3 mm
Battery
Built in Battery 3000mAH 4-5 hours via wifi
Camera
VGA
http://www.merimobiles.com/SenseV7_1_0_GHz..._p/meri0635.htm
http://www.e-ville.com/lang-en/tablet-comp...diel-flick.html
http://www.suli.com.au/my-7#!__my-7
Anyone else got this tablet? I'm wondering if there's any custom ROMs yet for this device?
I bought one yesterday and I'm waiting to receive it
mir2006 said:
I bought one yesterday and I'm waiting to receive it
Click to expand...
Click to collapse
Great! post your experiences when you get it
root functions with superonclick 1.9.1. It is 2.3.1 on the device.
Hi I bought one ttoday. When arrive I will write the impressions.
hey friends,
i own one too. apparently theres a firmware update to fix battery issue.
http://www.99pad.com/thread-23429-1-1.html
http://www.apadcn.com/post-58.html
but its sooo complicated
It's not complicated, I just wish Google could translate that page better, Merimobiles are providing a firmware update guide this week on their site so it should clear things up. I'm defintalely going to try this newer firmware with the guide.
How is It better? sensev7 or rena3? I bought the sensev7 but I don't know. The screen resolution for sensev7 is better, but doesn't have many other things for exemple bluetooth and microfone
Sent from my HTC HD2 using XDA
great news, rena3 on deal extreme (199.99)
http://www.dealextreme.com/p/7-capacitive-lcd-dual-core-android-2-2-tablet-pc-w-camera-wi-fi-bluetooth-hdmi-4gb-cortex-a9-81345
oh ya , guys , the battery life kinda sux doesnt it ?
quantumfusion said:
oh ya , guys , the battery life kinda sux doesnt it ?
Click to expand...
Click to collapse
I get 3+ hours easily, only thing that sucks is the battery indicator as it doesn't show the correct charge, I guess it's just a firmware issue.
How did you update the firmware btw? Did you manage to update it with the chinese instructions?
refer "How to use FWDN" here
http://forum.xda-developers.com/showpost.php?p=14237828&postcount=2
(don't flash any images in this thread. it's for tcc8902 tablet, not for you)
fun_ said:
refer "How to use FWDN" here
http://forum.xda-developers.com/showpost.php?p=14237828&postcount=2
(don't flash any images in this thread. it's for tcc8902 tablet, not for you)
Click to expand...
Click to collapse
ok I got it, thanks, will try it tonight!
Is there something special how to reboot this tablet to FWDN mode? Or do you do it from the FWDN software?
phiit said:
ok I got it, thanks, will try it tonight!
Is there something special how to reboot this tablet to FWDN mode? Or do you do it from the FWDN software?
Click to expand...
Click to collapse
try power off -> hold back & power on.
for reference, on EM71, home + power is FWDN and menu + power is fastboot and back + power is recovery. adb reboot bootloader goes fastboot mode.
fun_ said:
try power off -> hold back & power on.
for reference, on EM71, home + power is FWDN and menu + power is fastboot and back + power is recovery. adb reboot bootloader goes fastboot mode.
Click to expand...
Click to collapse
Will try those, thanks
DO NOT USE FWTOOL TO INSTALL RECOVERY!
TOUCHSCREEN WILL BE DEAD!!!
if you can flash 2.3.3 ROM for LY-F521 posted on 99pad, please try clockworkmod
http://androtab.info/files/tcc8803/cm7/20110615/LY-F521-8K/
I think LY-F521-8K-recovery-signed.zip can be installed from stock recovery.
I don't have LY-F521, so I can't test it. please use with care.
if it doesn't work, please reflash 2.3.3 ROM.
don't use this file on non-2.3.3 ROM or on other tablets. it may brick your tablet!
fun_ said:
if you can flash 2.3.3 ROM for LY-F521, please try clockworkmod
http://androtab.info/files/tcc8803/cm7/20110615/LY-F521-8K/
I think LY-F521-8K-recovery-signed.zip can be installed from stock recovery.
I don't have LY-F521, so I can't test it. please use with care.
if it doesn't work, please reflash 2.3.3 ROM.
don't use this file on other tablets. it may brick your tablet!
Click to expand...
Click to collapse
Any more info on this CM7 ROM? Getting stable complete CM7 for this tablet would be early christmas!! Is it beta or alpha or ?
phiit said:
Any more info on this CM7 ROM? Getting stable complete CM7 for this tablet would be early christmas!! Is it beta or alpha or ?
Click to expand...
Click to collapse
sorry, no "stable" "complete" release are exist. I don't have LY-F521 nor another tcc8803 tablet, I don't know what work and what not work on LY-F521. if you want to know how good, please test and tell me result
by the way, CM7 is just for my fun. I like dev work and I don't care result. I think almost same level on tcc8902. refer following thread
http://forum.xda-developers.com/showthread.php?t=1101094
if someone test CM7 for LY-F521 and basic function works, I'll add LY-F521 for my target. but don't expect progess, it's my spare time project.
I'll give it a try in a day or two when I have more time to play with this thing. If one day there's working CM7 for LY-F521 I'd be glad to help you out
phiit said:
I'll give it a try in a day or two when I have more time to play with this thing. If one day there's working CM7 for LY-F521 I'd be glad to help you out
Click to expand...
Click to collapse
thanks. but please use with care. I can't promise my files doesn't brick your tablet...
if 99pad 2.3.3 ROM works fine on your tablet, my clockworkmod and cyanogenmod will work...I hope so
Related
hello my firends! Im a new android user, bought first android phone just week ago. I have Huawei U8500 and i think it's very new model and there are very few people who have it. There's no official 2.2 or 2.3 version so im looking for ROM. I think there is no ROMs for this model yet ? But can i use ROMs which was created for other phones ? im really really hoping that someone will make 2.2 or 2.3 for this model. Thanks for answers.
i was searching for few days... i understand russian a little bit so i found 2.2 version made by russian guy, i didn't tried it yet becouse i don't how to instal that so i dont know if it's with russian language or not, but fact is that there is 2.2 version for U8500 ! Few russians tried that and it's working fine for them !
it's link for the 2.2 narod.ru/disk/4575221001/%D0%9F%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B02.2_2901.rar.html
Im also trying when i have spare time to locate a u8500 rom . im a extremly novice user tho so prolly wont find much .
Tried to get that russian rom but seems the link is dead or just blocked .
Is anyone working on a eng realease for this phone ?
Or news if there will be a official rel i have missed ?
/thanx
Huawei U8500 2.2 Beta ROM
http://www.huaweidevice.com/tcpsdow...entName=U8500 V100R001C00B705(Froyo Beta).zip
silverkuo said:
http://www.huaweidevice.com/tcpsdow...entName=U8500 V100R001C00B705(Froyo Beta).zip
Click to expand...
Click to collapse
And how do I install that one?
Lucce96 said:
And how do I install that one?
Click to expand...
Click to collapse
To install it:
1. Unrar it to your computer, and find a folder named "dload" with the biggest size.
2. Copy that "dload" folder to root of your SD card
3. turn off phone
4. Hold volume up key + end call (red) key and the press power key. Wait for it to load, it will say something like "Updating system" Wait for it to finish, if it says fail, just try again
5. After it says "Update complete" or "Update successful" just restart your phone and you'll have the new beta firmware.
6. Reboot can take about 5 minutes. Be patient.
Do it always while charging.
Highly recommend to back up the original firmware before installing new ROM's
On your own risk. You can brick your phone and you void your phones warranty.
CyanogenMod 7 ifolder.ru/22836951
Hi
Many thanks, tried this out on a huawei u8300 and it works ok for beeing first release i guess but some problem with the market applikation that does not want to download, have tried to install another package of google aps but that put me into a bootloop, any thing obvious i have missed?!
xxl-pda said:
CyanogenMod 7 ifolder.ru/22836951
Click to expand...
Click to collapse
Hi, to load phone in recovery mode and to fulfill wipe date and a cache. I apologize for the bad English
How did you guys download this?
The only way i can see the link to proceed to download is via google translate. And when i click it i get a 404.
/Peter
You cant use google translate when clicking! Under the android guy pic, click where it says сюда, you then come to another site, just now click on a link on the page, that will take you to another page (the sponsor page), then you will se that it will start ticking the time in the top of the window, then after that you can click again and actually start the download....
depositfiles.com/files/8i1d8tmbh
Just wanted to say that this rom works awesome on my u8300.
It requires some tweaking. Change of lcd density etc. And the screen calibration isn't perfekt. But it's much faster than the stock rom so i'll stick with it.
Definetly worth a shot.
But according to a user on another forum there might be problems when you downgrade from a 8500 rom to the stock 8300. I haven't tested, so i can't really comment on that...
ghah said:
hello my firends! Im a new android user, bought first android phone just week ago. I have Huawei U8500 and i think it's very new model and there are very few people who have it. There's no official 2.2 or 2.3 version so im looking for ROM. I think there is no ROMs for this model yet ? But can i use ROMs which was created for other phones ? im really really hoping that someone will make 2.2 or 2.3 for this model. Thanks for answers.
Click to expand...
Click to collapse
u can find various roms from below link including 2.2 and 2.3
wiki.modaco.com/index.php?title=Huawei_Firmware_U8500&
damn there rally is nothing for this device
Hai!
Please tell me what is possibile to do with this U8500. I have original firmware but if possibile i wana try some other ROM or do some upgrade?
Please tell me is is something new or what is possible to use with U8500.
THX
http://code.google.com/p/rom-u8500-sanek011/downloads/list
http://code.google.com/p/huawei-u8500-dowloads/downloads/list
ROMS.
help
how to upgrade step-by-step for huawei u8500.. i just a noob that wants to upgrade its phone. already try to root but fail
Trying again.
Sent from my U8500 using xda premium
Hello;
i search up and down and i dont find any official rom for JXD S9100. here is 2 isusses
a. if there's any other rom to flash the device with.which rom is better and which one is rooted or could be rooted .
b. this device is not going to rom recovery mode.with volume up and power or volume down or even power with back buttom.so how could i flash it with supposed rom.
xgeek.cub said:
Hello;
i search up and down and i dont find any official rom for JXD S9100. here is 2 isusses
a. if there's any other rom to flash the device with.which rom is better and which one is rooted or could be rooted .
b. this device is not going to rom recovery mode.with volume up and power or volume down or even power with back buttom.so how could i flash it with supposed rom.
Click to expand...
Click to collapse
Check the link in my signature
Thanks but there are two issues:
Is anyone wrote especial time for this device. If not how could I write my own rom. Preferably the 4.0.4.
The second one is the version of android that Mapan has. What is the android version on that rom.
And also is an English version of livesuite pack. I have one but it is chinese.
Really thanks for your answer.
(^ム^)
xgeek.cub said:
Thanks but there are two issues:
Is anyone wrote especial time for this device. If not how could I write my own rom. Preferably the 4.0.4.
The second one is the version of android that Mapan has. What is the android version on that rom.
And also is an English version of livesuite pack. I have one but it is chinese.
Really thanks for your answer.
(^ム^)
Click to expand...
Click to collapse
Livesuite-- The one in the link on my guide is in English.
Also the version on the Mapan site is 4.0.4
You could check over at TechKnowForum. There is quite a bit of info there about these generic tabs...
more info
restlessrob you are a life saver.
but I would be happy to have a link that you directed me to.
and what is the mapan CPU overclock ratio? 1.2 or 1.GHZ
but important stuff
could I change the cpu rate after installation of rom?
I heard I have to use something called LCD density moder. what is it where could I get it
and what is the values for my tablet to set within?
is it possible to change the internal device memory with trade?
P's: i found a ciyogen mode for alllwinner a10 what is it? is it a firmware like mapan!? ♡(^ム^)♥
I never got that far. I got the kindle and so gave the tablet to my mum. I believe it to be 1.0 I am not sure.
Sent from my KFTT using Tapatalk 2
info
Hello there,
Thanks for you your kindness.
I did flash with both rom.
Both are great mapan has some power in it. Nice governer battery. Also nice kernel defenetly no shen. More speed in it. And more organized defenetly great backbone.
And freelander sweet as a honey and smooth as a butter. Very very nice reselution. Indeed nice battery usage. Nice fonts and so much speed and agility. Defenetly compatible with EA and Gameloft games. Top speed. Thought nothing to be picky about it comes with five chinese app which are are in dalvick and can not be removed but you can freeze the sweet by titqnum backup.
I HOPE HERBY THAT FREELANDER HEARS ME AND CONTINUES TO BUILD FIRMWARE FOR FREELANDER PD60.
Please someone tell them.:silly:
Ps: mapan doesn't have any chinese or additional app.
Do you know if any other firmware matches our device?
Hello again
Ps
Mapan is clocked at 1and freelander at 1.2 but you can easy could root the newly flash device install a cpu overclocking app and change the frequency but don't go over 1.2¡¡¡¡¡¡¡
hi guys i have de freelander pd60 but i got some issues with the freelander rom on pandawill
livesuit didn't reckognise it so i can"t install it where did you find your firmwares ??
can you give me a link ?
Hello my dear friend
It is a common mistake which I did it it the last time.
You should only use what is provided by the rom company you choose.
Ie. If you want to flash the pd60 rom use the very only livesuit which they provide .
and in their livesuite, you can find the usb driver.
after you flashed, For usb debuging mode driver go to folder named usb-driver out side the livesuite not in it.
It is worth to note you could use usb driver inside the livesuite of mapan mx913 for flashing time. Only for flash not the usb debugging driver which mapan provided.
TABLET OFF VOL- then CONNECT THE TABLET TO PC then install the DRIVER
TABLET OFF, VOL+ then CONNECT THE TABLET TO THE PC to make Livesuit find the tablet
link
egguibs said:
hi guys i have de freelander pd60 but i got some issues with the freelander rom on pandawill
livesuit didn't reckognise it so i can"t install it where did you find your firmwares ??
can you give me a link ?
Click to expand...
Click to collapse
PHP:
http://www.pandawillforum.com/soft/PD60%20smart%20120801%281%29.rar
http://pan.baidu.com/share/link?shareid=191236&uk=2351629104
both are the same.
i think you have the issue with the driver. i that case you should use the drivers come with th MAPAN MX 913 in here:
PHP:
http://index.maixin-china.com/download/software/MX710A%20Update%20Tool%202012.rar
http://index.maixin-china.com/download/software/MaPan_MX913_Firmware_201212.rar
Sorry the second batch of link is wrong. i mean they are rom
the link is
PHP:
http://index.maixin-china.com/download/software/win7_UsbDriver_For_MaPan.rar
TABLET OFF VOL- then CONNECT THE TABLET TO PC then install the DRIVER
TABLET OFF, VOL+ then CONNECT THE TABLET TO THE PC to make Livesuit find the tablet (if you do it right the live suit start to flash by itself just don't forge to say yes to format the internal disc). :beer:
Hello Everyone,
I have a Penta IS709C tablet with specifications as follows:
Operating System Android 4.0.4
SOC Rockchip RK2906 (Basically a RK2918 SOC without HDMI Output)
Processor Cortex A8 1.0 GHz
GPU Vivante GC800 Graphics Engine
RAM 512MB (~323MB Available)
Internal Memory 4GB (~2.04GB Available)
External Memory Expandable up to 32 GB with a TF (Micro SD) Card
Display Type LCD
Display Size 7 Inch
Touch Type Multi-touch Capacitive
Sensors
Accelerometer (MMA8452Q – Present and Active/Enabled),
Light Sensor (AL3006 – Present but Inactive/Disabled),
Magnetic Field Sensor (AK8975 – Present but Inactive/Disabled),
Orientation Sensor (AL3006 – Present but Inactive/Disabled)
Proximity Sensor (AL3006 – Present but Inactive/Disabled)
Camera 0.3 MP
Speakers Stereo Speakers
Battery Capacity 3000 mAh
USB Port Mini USB (On-the-Go)
Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n
Connectivity Supports 2G and 3G USB Dongles (GSM and CDMA)
I have rooted it and am looking for a good custom ROM (Jelly Bean preferred) for it (one which can enable all disabled kernels and more importantly the kernel which supports RAM swapping. Can some one help me get one?. I also have the firmware (update.img) for it and am ready to share it with someone, who is willing to create a custom ROM out of it.
Thanks for all your help....
Have I posted on the wrong place? Or is it so that there is no one kind enough to help me? It has been more than 24 hours, but I have not had any responses.
Please help....
Sent from my Full AOSP on Rk29sdk using xda app-developers app
Hey,
I'm quoting some fellow RCs I asked about this:
Oh a Rockchip tablet?
Oma's ROMs for the RK2918 should be able to help
Click to expand...
Click to collapse
I used to own a couple different rockchip tablets, only place I know of developers working on those is freaktab.com have him talk to finlessbob who knows the ins and outs of these.
Or here on xda have him search for the nextbook premium 7, there are a couple devs who worked on that tab here and made a few custom ROMs, I and a few others tried to get cwm on it and failed but the way you flash those things it isn't needed for custom ROMs kernels etc, its all done with the flash tool.
Click to expand...
Click to collapse
Let me know if you have other questions, and I'll forward them.
Good luck
Hi Germainz,
Thanks for the reply....
I tried Oma's ROM and my tab was unable to move any further to first screen during boot. I also searched a lot for other custom ROMs but could not find one which is the reason I decided to prepare my own custom ROM with at CWM recovery. For this I extracted recovery,img from updated.img (obtained from vendor) and uploaded it to builded.clockworkmod.com.
The question now is: Is this the correct way of obtaining stock recovery image for upload to builded.clockworkmod.com or should the recovery.img only come from device?
Thanks for you help...
Regards,
Amit Srivastava
GermainZ said:
Hey,
I'm quoting some fellow RCs I asked about this:
Let me know if you have other questions, and I'll forward them.
Good luck
Click to expand...
Click to collapse
amit_aks_007 said:
Hi Germainz,
Thanks for the reply....
I tried Oma's ROM and my tab was unable to move any further to first screen during boot. I also searched a lot for other custom ROMs but could not find one which is the reason I decided to prepare my own custom ROM with at CWM recovery. For this I extracted recovery,img from updated.img (obtained from vendor) and uploaded it to builded.clockworkmod.com.
The question now is: Is this the correct way of obtaining stock recovery image for upload to builded.clockworkmod.com or should the recovery.img only come from device?
Thanks for you help...
Regards,
Amit Srivastava
Click to expand...
Click to collapse
That is the correct recovery, but even if you get it to build, you may have a tough time getting to work on your tab. With the other rockchip tabs a fellow RC used, no one could get it working. Again, a recovery may be nice but it's not needed for what you's looking for.
Also, even though these may all be similar tablets, flashing custom ROMs from one to another most certainly won't work, so try to port the ROM you wants to your tab using your vendor's ROM as a base then flashing it with the flash tool.
There are some useful tutorials on xda about porting ROMs, too. Good luck again.
Thanks...will get back to you should I need any further help....
GermainZ said:
That is the correct recovery, but even if you get it to build, you may have a tough time getting to work on your tab. With the other rockchip tabs a fellow RC used, no one could get it working. Again, a recovery may be nice but it's not needed for what you's looking for.
Also, even though these may all be similar tablets, flashing custom ROMs from one to another most certainly won't work, so try to port the ROM you wants to your tab using your vendor's ROM as a base then flashing it with the flash tool.
There are some useful tutorials on xda about porting ROMs, too. Good luck again.
Click to expand...
Click to collapse
Some good news
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
amit_aks_007 said:
Thanks...will get back to you should I need any further help....
Click to expand...
Click to collapse
amit_aks_007 said:
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
Click to expand...
Click to collapse
Mouse? Don't you mean touch?
CWM for Penta IS709C
I meant mouse for sure...touch is working fine....
GermainZ said:
Mouse? Don't you mean touch?
Click to expand...
Click to collapse
Thanks to Fun_
I missed to thank Fun_ for this generic CWM...
amit_aks_007 said:
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
Click to expand...
Click to collapse
Custom/ Unofficial Jelly Bean 4.2.2 ROM for Penta IS709C
Hello Everyone,
The 1st Custom/ Unofficial Jelly Bean 4.2.2 ROM for Penta IS709C is available here: http://forum.xda-developers.com/showthread.php?t=2361857
Please click thanks if I've helped you ever
Enjoy....
Q&A for RK3066 Tab Genio by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey, I am new here. (I apologise for my bad english)
I have an a Xvision 101p11c i wanted to know if is there a kernel for this tablet.
res: 1280*752
rk3066
same wifi chip
screen and touch chips i can find it
please =/
Good time of day. Possible to alter the firmware for the installation of the recovery?
@oma
The latest CM10.1 v. 1.4 include HW accellaration?
Thanks
Thanks OMA!!
You made my day, my two Pipo S2 works like a charm now!
Thanks for your great work!
I also have an Measy stick based on RK3066, is there any firmware for this gadget to?
Regards // Cyberott
Dear sir i need this tablet rom
Dear boss
i need this tablet rom
Ds733-v3.0 2012.10.08
please sahre this rom
i need very very urgtently
thanks you very much
YuanDao N101II
Hello Oma, first of all thanks for your work. I flashed ROM for my Yuandao N101 II tab based ono your work I got from VonDroid - unfortunately the touch screen didn't work. It worked neither with your rom nor with the newes original firmware. As this was described by some other folks there - for some specific sub-model maybe - and as the touchscreen works with an older stock-rom - this seems to be software-related.
Is there any possibility to overcome this issue? The firmware that is working gives me infrequent hangs for no reason and was described as buggy by other users, too.
Thanks a lot in advance for your help
pmp 5780d_duo
HI to all . i am new here ,i have this tablet prestigio 5780d_duo .i wanted to flash other rom then this official s..... can some one plz tell me which rom is best for this tablet,and plz give me link for rom and kernel. ty in advance
HELP :C
Hi Sir Oma good day
im using your CM10.1 for rk30
i have only one bug the brightness i already reflash the boot.img on your page
and flashed the brightness fix via CWM
but the thing is it doesnt work my tab has full brightness and my battery is
too fast to drain can you make a fix for me?
im using oplus 9.76 from philippines
if you need my kernel here it is
Again the unresponsive touch screen
Hi @ all, as specified in my last post there is a difficulty with the touchscreen with a version of omars great fw that has been ported to VonDroid with minour changes. So, to find out if my tablet's touchscreen can work with this fw, I dug a bit deeper and located the touch screen driver.
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
The only documentation I could find so far is that documentation for this device is lousy and chaotic as is supply with drivers... seems to be quite a fair description. Until now, I found no way to locate additional hints about what touch screen might be built in my tab. Neither online nor on the tablet itself.
Anyhow, some questions came to my mind on and on again, as the last fw supporting the touchscreen is a tiny little bit buggy:
Might there be a chance that the specified touch screen works with the fw? If no: Is there a possibility to configure the fw in a way that it will work?
It would be very nice to find out more on that as I don't want to simply do the same procedure as I did last time: spending about two days to install the same old buggy fw in the end. This is definitely not satisfying.
Thanks a lot for any hint - I tested the fw with mouse and keyboard, but that's no way for working long time if you know you've got a touchpad. Nonetheless, it was long enough to get quite surprised what my tablet is capable to do - and willing to do some work for having these capabilities
Meanwhile, I'll dig deeper
[edit] Guess I found some metal - hope, it's silver at least...
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/gt968.c
Goodix driver Version 1.0 .
Is there a possibility to add that to the rom? Woud be great...[/edit]
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
help me with my screen rotation
heres my new sensor reading
- tab vertical, landscape (y=+9.4)
- turn left to portrait (x=+9.7)
- turn right to portrait (x=-9.6)
- tab horizontal screen up (z=+10.0)
when i tilt my tab to +y my screen got reverted to -y same with x axis. ive dscovered that my y axis is portrait not landscape just like phones axis direction
Icoo d90pro
How can i use your firmware on my device ICOO D90PRO ? I would like to get OC kernel compatible on my device and other . . . Thanks !
USB Host Modem
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1. It works flawlesly, but there is one thing that bothers me. With stock 4.2.2 chinese rom I've been using usb modem(HUAWEI) to connect to the internet, which I've been connecting to HOST port.
After flashing OmniRom, the usb modem does not work. It does show up in USB Host Controller app, the storage in stick, works too, but it won't find mobile network. It gives me an error when searching for network.
Is there some setting that I should set or anything else to get it to work?
lazyNeighbour said:
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1.
Click to expand...
Click to collapse
Could you post the link of this ROM? I'm very interested.
Petitgibus said:
Could you post the link of this ROM? I'm very interested.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showpost.php?p=54300296&postcount=1118
Does anyone has a discolored yellow screen when using AOSP JB 3.4 for RK3066?? If yes is there a solution for this ??
Sent from my WT19i using xda premium
Multiple Tablet Supported or Specific
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
ahtisham200 said:
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
Click to expand...
Click to collapse
Before flashing anything do a backup from your stock firmware. You can google about how.
Usually changing the kernel.img for the stock of your tablet and flashing the ROM it might work (sometimes wifi, etc. Not). Also is important to know if your kernel is 3.0.8+ or 3.0.36+.
Cheers
I have a problem
Hi Oma! I have an Manta MID702 , but when i install your cm 10.1 on it, it boots, but i cant use the tablet cause there is a message: android.com.phone process has stopped. It reappears every time i close it. What can i do? Thanks in advice
To sum it up once more: I've got a touch screen that works with the original firmware but won't respond on the other roms. Problem: The original firmware is lagging and quite frequently simply coming to a halt.
Loewe_78 said:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
Click to expand...
Click to collapse
Is there a possibilitäy to built a firmware that has the driver for the digitizer I specified? Would be great. I've got the orignal firmware.
Hello forum, please excused my poor english.
A few month ago i was writing a text message when my phone screen doesn't work some parts of the left side (in that moment i was using cm11 android 4.4.4, recovery bigpart). So in that moment i do not care, i was using it with the keyboard horizontal. But with the passage of time the bluetooth, font camera and wifi doesn't work correctly.
I think it was a rom trouble, so i reset my phone, but it doesn't work. I reinstall the rom, doesn't work too. Even i installed the mokee rom (android 5.0.2).
Before cm11 i used cm7, cm9 4.0.4, cm10 cm10.1 (android 4.1.1, 4.1.2, 4.2.2, 4.3) and the phone work correctly (except some bugs ). So i reinstalled every of that's roms... the same problem.
I followed the instructions in this article https :// phenobarbital.wordpress.com/2014/08/22/motorola-android-rescatando-al-soldado-atrix-4g . Doen't work too
Searching in youtube i saw a lot of people with the same problem and one of the user comment that it should be the kernel, so i flash every kernel for atrix mb860 that i found in the internet... guess what, nothing.
I'm actually using a miui rom android 4.2.2., it work AMAZING and do not reheat instead from cm7 to cm11 and mokee rom, but i have the same trouble jaja.
with this rom and cm10.1, cm11 and mokee the kernel is the same 3.1.10, i think perhaps this is the cause, but when i try to flash another rom i loss android, then i have to reinstall it (now i know why).
I'm searching for a different kernel that work in android 4.2.2 up.
I'm sorry if i bored you and excused my poor english again if anyone can helpme i being really really grateful, i love that cell phone.
Forza Motorola Atrix 4g mb860 <3
I share a srennshot that show what is the part of sreen that do not work, it is just the space between the vertical lines, ignore the horizontal lines mega : /// #!5IgjmIRI!OFwb0qz2XHv3GvkkZCQiB5NRyL6PceMbfGmxXKLa6qc .
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
I don't understand. In the left side of the touch doesn't work. I try with a rom named darksideblur etc i think it is 2.3, but it's the same. When i using a recovery touch the left side work, that's the reason beacause i think that may be it is a kernel trouble.
I should try with a 2.3 stock rom.
And you should try with a miui rom jaja
lokr said:
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
Click to expand...
Click to collapse
Do you have the link of your rom and parches? Or may be i can fix mine?
pendejete said:
Do you have the link of your rom and parches? Or may be i can fix mine?
Click to expand...
Click to collapse
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
lokr said:
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
Click to expand...
Click to collapse
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
pendejete said:
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
Click to expand...
Click to collapse
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
pendejete said:
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
Click to expand...
Click to collapse
Interesting, the same problem occurred at my screen too, and precisely in this section (like it is on your screen) screen not work,
when I move a finger across that part of the screen, cursor skips that part.
Have you solved the problem, and how?
Motorola Atrix 4g, 4.4.4 KitKat