This is my 1st attempt at porting a boot animation.
All credit goes to the creator.
Original boot animation can be found here ------>
http://forum.xda-developers.com/showthread.php?t=1078743
Thanks to Nottach for instructing me in the basics so I could start playing with porting boot animations.
I have included what I thought was a good audio match.............nice Transformers clip.
I take no responsibility for any damage you do to your phone. This has been tested on my Atrix only.
Installation:
1.Download "bootanimation_techboot_transformer.zip" and "transformers.mp3"
2.Copy zip and mp3 to sdcard
3.Use any file manager (ex. Root Explorer)
4.Move "bootanimation_techboot_transformer.zip" and "transformers.mp3" to /system/media
5.Backup existing "bootanimation.zip"
6.Rename "bootanimation_techboot_transformer.zip" to "bootanimation.zip"
7.Reboot phone
8.Enjoy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bootanimation_techboot_transformers.zip
transformers.mp3
___________________________________________________________________
Do not use this file with an unlocked bootloader. This file is for the old Tenfar CWM.
techboot_transformers_CWM.zip
___________________________________________________________________
Unlocked Bootloader CWM Installation (Backup your original bootanimation.zip):
Download techboot_transformers_bootloader_unlocked.zip
Copy zip to sdcard
Boot into CWM
Hold power button and volume down button until Fastboot appears.
Press volume down button until you see Android Recovery.
Press volume up button.
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select techboot zip file
Select techboot zip file again on confirmation screen
Select "Go Back"
Select "reboot system now"
Enjoy!
techboot_transformers_bootloader_unlocked.zip
___________________________________________________________________
Unlocked Bootloader CWM Installation for 2.3.4 (Backup your original bootanimation.zip):
Download techboot_transformers_unlocked_2.3.4_CWM.zip
Copy zip to sdcard
Boot into CWM
Hold power button and volume down button until Fastboot appears.
Press volume down button until you see Android Recovery.
Press volume up button.
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select techboot zip file
Select techboot zip file again on confirmation screen
Select "Go Back"
Select "reboot system now"
Enjoy!
techboot_transformer_unlocked_2.3.4_CWM.zip
[email protected]$$. Works great. Gj!
Sent from my MB860
very cool!
how do you attach the animation to show on your post? I want to show an animation i just created too
shady_lanem said:
how do you attach the animation to show on your post? I want to show an animation i just created too
Click to expand...
Click to collapse
I upload the GIF to Photobucket, then drop the link into the post as an image.
thats hawt animation... although can i use this without sound? ... do i just need to delete the mp3?
danial.aw said:
thats hawt animation... although can i use this without sound? ... do i just need to delete the mp3?
Click to expand...
Click to collapse
You are correct!
Sent from my Cool Blue Gladiatrix.
That looks good ill have a try when im next home!
Sent from my MB860 using XDA Premium App
Hey, I'm honoured that you liked my bootanimation and gj porting it!
Added CWM version for those with unlocked bootloader and new Tenfar CWM.
maybe an fyi for others...when I first did this I got the image but no sound.
if that is the case rename the transformers.mp3 file and use a capitol T
or edit the desc.txt file...either one.
Hope this helps someone.
smohk said:
maybe an fyi for others...when I first did this I got the image but no sound.
if that is the case rename the transformers.mp3 file and use a capitol T
or edit the desc.txt file...either one.
Hope this helps someone.
Click to expand...
Click to collapse
Should have been ok. Checking now.
Which version?
<edit> Nothing wrong with either CWM version. My 1st and the original zip file did have a capitol "T" in the description file. Fixing now.
<edit 2> Fixed. All versions are fine now, although I may remove the "non-CWM" version.
Sent from my MB860 using XDA Premium App
The originals...sorry.
I've been playing around with this ever since. Didn't know you could do sounds with boot. thats pretty cool.
hey I am on gingerbread, the sound doesn't work for some reason
I tried 2 kind of installation, it still doesn't work.
Also I check the T is capital, anyone has any ideas?
If you are on 2.3.4, then I can't help. I will change description to reflect it not working on this build.
im using this on hktw-2.3.4 w/o the sound (purposely) and it works fine.
Thanks! It works!
Animation works perfectly when moving from SDCard to system/media as OP instructed for the AT&T official 2.3.4 ROM, but the Transformers MP3 does not play as stated above - does anyone have any suggestions as to how to get it to work?
EDIT - FIXED per this thread, all you have to do is move the MP3 file to /system/media/audio/notifications and you'll get sound when booting! Thanks CaelanT for the fix!
I'll create a flashable Rom for 2.3.4 later today. Audio goes in /system/media/audio/notifications for this build.
Sent from my MB860 using XDA Premium App
Does this work for Galaxy S2, too? I'm interested.
Sent from my GT-I9300 using xda app-developers app
Related
i found a youtube vid that i had to have on my boot up. i came from an iPhone, so it was that much more fun adding this to my phone.
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
android_vs_iphone-atrix-cwm-1.zip
android_vs_iphone-atrix-cwm-2.3.4.zip !!NEW!!
INSTALLATION (for those who need it):
copy the file to your phone (i use sshdroid to copy it to my /mnt/sdcard/)
run System Recovery and choose Recovery Mode (make sure power is plugged in)
wait... (could it boot up past the Motorola logo any slower?)
select Install zip from SDCARD
select choose zip from internal sdcard (or just sdcard, your mileage may vary)
scroll down until you find the android_vs_iphone-atrix-cwm-1.zip file
hit your power button to select it
scroll down to Yes - Install android_vs_iphone-atrix-cwm-1.zip and hit your power button to select it.
watch the quick install screen
scroll down to Go Back and hit the power button again.
Reboot system now should be highlighted, hit the power button to reboot.
ENJOY!
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Changes:
09.05.2011 - Added updated version for GB 2.3.4 compatible with current CWM.
Haha that's awesome.
I'll let you know how it works when I try it out
thatoneguy247 said:
Haha that's awesome.
I'll let you know how it works when I try it out
Click to expand...
Click to collapse
aces, yeah let me know.
This is a pretty cool animation
itsonlym3 said:
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Click to expand...
Click to collapse
Laughed twice. one @ the animations and also @ this comment! haha!
using it...LOL..awesome.
Thanks! Awesome boot anim. BTW, I resized it to fit my phone (X10 mini pro). Posted it here: http://forum.xda-developers.com/showthread.php?p=14499094#post14499094
Is this a flashable zip or does it just need to be put in place of the bootanimation file?
lonlawrence said:
Is this a flashable zip or does it just need to be put in place of the bootanimation file?
Click to expand...
Click to collapse
flashable, that's what the [CWM] means.
edit: added installation instructions.
thanks. I was looking at some instructions on the various ways to change your animation, I guess flashing is the easiest. When the instructions say to replace your old bootanimation.zip, you'll find it in System/customize/resource (HTC) or System/media, but I have the Ginger_Alev3 ROM and my gingerbread animation is in System/bin. Think this will work OK on the gingerbread ROM?
lonlawrence said:
thanks. I was looking at some instructions on the various ways to change your animation, I guess flashing is the easiest. When the instructions say to replace your old bootanimation.zip, you'll find it in System/customize/resource (HTC) or System/media, but I have the Ginger_Alev3 ROM and my gingerbread animation is in System/bin. Think this will work OK on the gingerbread ROM?
Click to expand...
Click to collapse
to be honest, i have no idea. i flashed and tested it on a stock install and i'm currently running it on 4.1.83. i'm afraid i can't speak for anything else.
Doesn't work with gingerbread. I think the bootanimation being in system/bin is the problem.
You have gingerbread on the atrix?
Sent from my MB860 using Tapatalk
hoodlikegaza said:
You have gingerbread on the atrix?
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
re-read the post - he has a custom rom (p-rom) that has gingerbread animations.
Very nice! Thanks!!
ignore, bumbled post.
Old post but since someone bumped....and doesn't work with current CWM.
Unzip the file, go to extracted folder, open system then media folders, move the bootanimation.zip to data/local (Need something like Root Explorer to do so) and reboot. Should work nicely
Sent from my MB860 using xda premium
Auxilium said:
Old post but since someone bumped....and doesn't work with current CWM.
Unzip the file, go to extracted folder, open system then media folders, move the bootanimation.zip to data/local (Need something like Root Explorer to do so) and reboot. Should work nicely
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Added updated version for GB 2.3.4 compatible with current CWM.
i think this is my favorite animation. I just used root explorer and pasted in system/media.
thanks, glad you've enjoyed it.
It's seen 1000's of downloads and i think it's been put in a market app, although i don't know which one(s).
the original was done for the Galaxy Tab by Flokey and can be found here. i've tweaked it a tad and made the .zip much smaller.
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it's not an exact replica of what you'll see on your phone, but it's pretty close. check out the youtube vid in the above link to see it "live".
Download:
DukeOS-bootanimationLOW-cwm.zip (1.9M)
INSTALLATION (for those who need it):
copy the file to your phone (i use sshdroid to copy it to my /mnt/sdcard/)
run System Recovery and choose Recovery Mode (make sure power is plugged in)
wait... (could it boot up past the Motorola logo any slower?)
select Install zip from SDCARD
select choose zip from internal sdcard (or just sdcard, your mileage may vary)
scroll down until you find the DukeOS-bootanimationLOW-cwm.zip file
hit your power button to select it
scroll down to Yes - Install DukeOS-bootanimationLOW-cwm.zip and hit your power button to select it.
watch the quick install screen
scroll down to Go Back and hit the power button again.
Reboot system now should be highlighted, hit the power button to reboot.
ENJOY!
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Changes:
Thx !! Very cool !!
very nice！
please send other links. your link is not working. thx in adnvance.
itsonlym3 said:
the original was done for the Galaxy Tab by Flokey and can be found here. i've tweaked it a tad and made the .zip much smaller.
Preview:
it's not an exact replica of what you'll see on your phone, but it's pretty close. check out the youtube vid in the above link to see it "live".
Download:
DukeOS-bootanimationLOW-cwm.zip (1.9M)
INSTALLATION (for those who need it):
copy the file to your phone (i use sshdroid to copy it to my /mnt/sdcard/)
run System Recovery and choose Recovery Mode (make sure power is plugged in)
wait... (could it boot up past the Motorola logo any slower?)
select Install zip from SDCARD
select choose zip from internal sdcard (or just sdcard, your mileage may vary)
scroll down until you find the DukeOS-bootanimationLOW-cwm.zip file
hit your power button to select it
scroll down to Yes - Install DukeOS-bootanimationLOW-cwm.zip and hit your power button to select it.
watch the quick install screen
scroll down to Go Back and hit the power button again.
Reboot system now should be highlighted, hit the power button to reboot.
ENJOY!
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Changes:
Click to expand...
Click to collapse
please send other links. your link is not working. thx
vladzmir said:
please send other links. your link is not working. thx
Click to expand...
Click to collapse
i'll see if i still have it this evening when i get home.
thanks for the interest.
can it be used for all roms?
sanaldi said:
can it be used for all roms?
Click to expand...
Click to collapse
Froyo and GB were released and available for Atrix 4G users in 2011. Users were using this boot animation back then. Its 2013, and we have Froyo, GB, ICS, and JB. Switching boot animations is done on ALL versions and ANY ROM.
cool..... i reboot my phone a bit more lately
link is busted
[BOOT ANIMATION] GreenMatrix (+audio) (Updated 6/28) Added SkyBlue, Blue, & Blackout
All credit for this goes to the creator, Mr. Apocalypse.
Original boot animation can be found here ------>
http://forum.xda-developers.com/showthread.php?p=10040448
I will add the other colours the creator made this in as and when I have time.
Dropped in the techno audio from the Matrix as I thought the regular audio for this animation would be boring and too low in volume. May not be everyone's cup of tea.
May not work correctly on HKTW 2.3.4
I take no responsibility for any damage you do to your phone. This has been tested on my Atrix only.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CWM Installation (Backup your original bootanimation.zip):
1.Download whichever Matrix.zip you want
2.Copy zip to sdcard
3.Boot into CWM
4.Apply Matrix.zip
5.Reboot
GreenMatrix.zip
BlueMatrix.zip
SkyBlueMatrix.zip
BlackoutMatrix.zip
___________________________________________________________________
Unlocked Bootloader CWM Installation (Backup your original bootanimation.zip):
Download whichever Matrix_unlocked_CWM.zip you want
Copy zip to sdcard
Boot into CWM
Hold power button and volume down button until Fastboot appears.
Press volume down button until you see Android Recovery.
Press volume up button.
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select Matrix zip file
Select Matrix zip file again on confirmation screen
Select "Go Back"
Select "reboot system now"
Enjoy!
GreenMatrix_unlocked_CWM.zip
BlueMatrix_unlocked_CWM.zip
SkyBlueMatrix_unlocked_CWM.zip
BlackoutMatrix_unlocked_CWM.zip
Wow thank you very much for the quick response and quick work!!! cheers my friend.
So XD first Thank you for porting this Second I couldn't wait.. got bored and heh went to the original source link and ported the Blackout version and try it out XD Epicly Awesome!!!
So one less you'll have to work on unless you got to it already XP
[No responsibility taken if this kills your phone tested on my US At&t Atrix simpler than solving for x]
Updated with CWM version for unlocked bootloaders with new Tenfar CWM.
add atrix4G maybe better
THX goodjob
blue version anytime soon? just checking
Will try and get it done today.
<edit> Done, but can't upload to mediafire from work. Will do that when I get home.
Sent from my MB860 using XDA Premium App
CaelanT said:
Will try and get it done today.
<edit> Done, but can't upload to mediafire from work. Will do that when I get home.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
awesome thanks =) also, I'm not sure if I messed something up, I like to think I'm pretty android-tinkering savvy, but... I don't seem to have audio. I'm at work though, so I haven't done much to mess with it
I'm on an unlocked bootloader, and used that version
Did you install with latest CWM for unlocked phones? I have tested on my phone and is working.
Sent from my MB860 using XDA Premium App
Added SkyBlue and Blue versions.
Added Blackout versions also.
Now that you added the new cwm unlocked version...will it still work with my locked bell atrix?
Sent from my MB860 using XDA App
J-Roc said:
Now that you added the new cwm unlocked version...will it still work with my locked bell atrix?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
There are also CWM flash files for the older Tenfar CWM in the OP, so depending on which CWM you are using, you can still flash the boot animations.
The reason I have the unlocked bootloader version is because everyone who unlocked their bootloader also flashed the newer CWM which doesn't require you to have your phone connected to a power outlet. These files have to be slightly different in order to flash properly.
Ahh great cheers ...I suppose I should have checked back on the OP....rookie mistake..my bad
Sent from my MB860 using XDA App
Hi! I have a rooted galaxy s2 with stock 2.3.5. Is there a way to add the CRT animation to the stock ROM?
See this thread
To install, download Root Explorer app, then:
1. Download the file from the above thread and unzip.
2. Connect the phone to your computer via USB and copy the downloaded framework-res.apk file to a folder on the internal SD drive.
3. On the phone, open the Root Explorer app.
4. Navigate to /system/framework.
5. Long press on framework-res.apk and press Copy
6. Press back key then navigate to /sdcard/external_sd/backup and hit paste to create a backup on the external sd card [NB backup is a folder I use for backups, but you can paste it anywhere]
7. Press back key twice then navigate to the /sdcard folder where you copied the downloaded framework-res.akp file.
8. Long press on framework-res.apk and press Copy to copy the new version.
9. Press back key twice then navigate back to /system/framework and hit "Mount r/w" at the top.
10. Press Paste to overwrite the new file over the old one.
11. The screen goes black, the startup music plays, then the screen comes back and it's installed.
Thanks I changed the framework-res.apk and it works but the animation doesn't seem to display very well... It looks more or less like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Constable21 said:
See this thread
To install, download Root Explorer app, then:
1. Download the file from the above thread and unzip.
2. Connect the phone to your computer via USB and copy the downloaded framework-res.apk file to a folder on the internal SD drive.
3. On the phone, open the Root Explorer app.
4. Navigate to /system/framework.
5. Long press on framework-res.apk and press Copy
6. Press back key then navigate to /sdcard/external_sd/backup and hit paste to create a backup on the external sd card [NB backup is a folder I use for backups, but you can paste it anywhere]
7. Press back key twice then navigate to the /sdcard folder where you copied the downloaded framework-res.akp file.
8. Long press on framework-res.apk and press Copy to copy the new version.
9. Press back key twice then navigate back to /system/framework and hit "Mount r/w" at the top.
10. Press Paste to overwrite the new file over the old one.
11. The screen goes black, the startup music plays, then the screen comes back and it's installed.
Click to expand...
Click to collapse
Is it increasing counter?
ktix007 said:
Hi! I have a rooted galaxy s2 with stock 2.3.5. Is there a way to add the CRT animation to the stock ROM?
Click to expand...
Click to collapse
Check out jkays mods.
http://forum.xda-developers.com/showthread.php?t=1154278
If you have one of the supported stock Rom versions you can easily flash his stock odexed theme to keep the stock look then install jkay delux application and get the CRT effect and many other tweaks that I'm sure you will find useful.
Great lockscreen too.
I think this is a much better option than trying to do each mod manually.
Also everything from jkay is totally reversible.
Sent from my GT-I9100 using XDA App
aceofclubs said:
Check out jkays mods.
http://forum.xda-developers.com/showthread.php?t=1154278
If you have one of the supported stock Rom versions you can easily flash his stock odexed theme to keep the stock look then install jkay delux application and get the CRT effect and many other tweaks that I'm sure you will find useful.
Great lockscreen too.
I think this is a much better option than trying to do each mod manually.
Also everything from jkay is totally reversible.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I can't find any version for my ROM (I9100BUKI3F)
I fallow this video watch?v=UfJJ0h4d-80&feature=relmfu i do everything right till i try flash the cwd =[[
i have used all this file and i wont find them can somebody help me
i have used all this file
Orange 5.0.2.7-photon3 / ZIP version.
MD5 0dc70209659fecbf7a2a01fe64b431af / a7fa2daf946557006931d33f3954e350
Cyan 5.0.2.7-photon3 / ZIP version.
MD5 440baa230638bd12dfd38b67977d3ac3 / 4da9f845f5d8ae0c37d0e1deaecd931c
Light green 5.0.2.7-photon3 / ZIP version.
MD5 b0791b6a4e0ea1a593d450518f309315 / f4afa4ca6f9616713ba436149df48c46
Dark green 5.0.2.7-photon3 / ZIP version.
MD5 5ef4862918169c1b4f9b0cbd60c70267 / 12acbe4adac62dc79e9a2b9ed1d0ea3b
Blue 5.0.2.7-photon3 / ZIP version.
MD5 cb1a4b2b48d18f535f5a3ce312e3ee81 / 53eee173392a8a821e45e8ddb1bbefd6
Red 5.0.2.7-photon3 / ZIP version.
MD5 f95a0adfb47ae2b995412b89d95f40fe / ca222e4891f756b5b4ad59fe06b6f0bf
I'm assuming you unzipped them..?
Sent from my MB855 using XDA App
Yess i unzip the file
Is it not flashing CWM, or is it not there AFTER you reboot the photon? If it's not sticking (stock bootstrap appears after reboot) go to /system/etc and rename install-recovery.sh to install-recovery.sh.bak and it will stick. By default when the photon boots it checks the recovery and if it isn't right it will reinstall it. Renaming the .sh file prevents that (it will NOT stop you from booting properly).
I'm a MoPho-er
I think you right can you explain moree pleasee more detail in how to do it please
Use an app like root explorer (file manager) and navigate to the folder /system/etc. At the top of the window there will be a button to "mount R/W", this will make the directory read/write (R/O means read only). Find the install-recovery.sh file and long press on it. A menu will pop up. Choose rename and rename it to install-recovery.sh.bak (just add the .bak to the end of the file name) and save it. That way you will still have it if you need to go back to stock recovery for whatever reason. After you save click on the "mount R/O" button at the top of the window. This will change the directory back to "Read Only". After that you can flash CWM and when you reboot it will still be there.
I'm a MoPho-er
BTW, you can do the rename from the phone. It's just like renaming a file on a pc.
I'm a MoPho-er
Okk eveything sound good i thought that was the problem till i i open my rom explore i couldnt find the file install-recovery.sh anywhere =[[ pictures comming soon till phototrash start working=[[ im not going to stop till i i get flash some room kernel all hat good stuff =]
Pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What ROM are you on? stock? build? Try rooting your phone and retry flashing CWM.
/system/etc. My phone is already root and the file of cdw wont stick in my phone
whats stock or built
Sent from my MB855 using xda premium
Jasonfnts1 said:
/system/etc. My phone is already root and the file of cdw wont stick in my phone
whats stock or built
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Stock = NON-Custom ROM, or the one that is shipped with your phone (in this case, Gingerbread)
Build = Check Settings>About Phone
Not sure why you don't have that install_su.sh file or whatever, but I would use RSD lite to go back to STOCK Build 198_6, unlock again, and then flash CWM 5.0.2.7. It's fast, easy, and you're starting from scratch so you aren't missing any files.
it say build number 4.5.1 A-1 198_7
I would agree with KTT16, SBF back to 198_6, root, unlock, then flash the 5.0.2.7-photon3 recovery. Follow what I listed a couple posts earlier and rename the install-recovery.sh before you flash and everything should be cool. Look in the "Mopho Compendium" thread and you'll find everything you need. There'll be links to videos by qbking77 showing how to do everything.
I'm a MoPho-er
Ok so i download 198_6 put my phone back to stock =[[ them root my phone again , unlock them remane the file install-recovery.sh them flash the 5.0.2.7 and i would be good?
Yes
Sent from my MB855 using xda premium
whats the name of the file 5.0.2.7 ??
Havent you tried flashing that cwm file before and it wouldn't stick?
Sent from my MB855 using xda premium
yeaa sorry man i been trying for a month already im just going crazi bu thanks for your help !