http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250789197947#ht_3153wt_1139
Seems like a great price. Not sure if it fits the GTablet exactly, but turns out this guy is based like 5min from my house, so I can always return it to him if its not good.
Anyone have any opinions on this?
you could always "ask a question" to get the dimensions. I'd be afraid that it will stick out the sides
Almost definitely not actual leather (I hate deceptive descriptions) and there doesn't seem to be any visible way to actually ATTACH the tablet to the thing. Horrible picture details, and it is highly unlikely a single case could hold (well) a 7/8/10 inch tablet PC like the seller says.
I would pass on that one. Just go to electroniccrap.com or look for listings here for the ones MADE for the G-tablet.
Dishe said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250789197947#ht_3153wt_1139
Seems like a great price. Not sure if it fits the GTablet exactly, but turns out this guy is based like 5min from my house, so I can always return it to him if its not good.
Anyone have any opinions on this?
Click to expand...
Click to collapse
There seem to be 2 clips on the bottom and 1 on the top to hold it. Most cases come with 1 (or 2 ) more clips on the side. Without this there is a chance of the tablet sliding out through the sides. Although once you have side tabs you have to be careful that they dont block the usb port.
Also you *have* to check the dimensions
I have a
http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Build quality is not super, but it is functional.
It is $ 24.99 but will take 2 weeks or more to get to you.
don't waste your money
I've had one of these before. They are really cheap looking and are not leather but a shiny slippery plastic. It is not recommended for use in a professional setting unless you enjoy people laughing at you. There is a thread in this accessories section that covers this case at length. Search for USB keyboard case.
Also, the tablet does not stay firmly in the case and will slip around a lot and may even fall out.
Avoid this case like a dirty diaper.
sjmoreno said:
I've had one of these before. They are really cheap looking and are not leather but a shiny slippery plastic. It is not recommended for use in a professional setting unless you enjoy people laughing at you. There is a thread in this accessories section that covers this case at length. Search for USB keyboard case.
Also, the tablet does not stay firmly in the case and will slip around a lot and may even fall out.
Avoid this case like a dirty diaper.
Click to expand...
Click to collapse
LOL, you and me have different priorities! I'm not buying this to wow people and I'm really not concerned about people laughing at me. I am concerned about the tablet not fitting tho. Either way, this case would only be for when I wanted a keyboard with me, which is not all the time (otherwise I'd stick to my netbook which is about the same size as the tab+keyboard case).
When I'm going on a trip, plane ride, camping, etc, and this will be the only thing I have access to when traveling light, I like the idea of a keyboard option. But that's another thing to carry, so I'd rather it be built into the case. But the rest of the time, a thinner classier case (like the Kindle DX ones) would be preferable to me, especially to sit and read in portrait orientation.
cbay said:
There seem to be 2 clips on the bottom and 1 on the top to hold it. Most cases come with 1 (or 2 ) more clips on the side. Without this there is a chance of the tablet sliding out through the sides. Although once you have side tabs you have to be careful that they dont block the usb port.
Also you *have* to check the dimensions
I have a
http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Build quality is not super, but it is functional.
It is $ 24.99 but will take 2 weeks or more to get to you.
Click to expand...
Click to collapse
That's a really great find, and for $4 more than this ebay auction, you are vouching for the fit! Do you have any pictures of your G-tablet fitting into that case?
Dishe said:
That's a really great find, and for $4 more than this ebay auction, you are vouching for the fit! Do you have any pictures of your G-tablet fitting into that case?
Click to expand...
Click to collapse
Dont have pics, but it fits (it is made for the gtablet),
Some info/pics are at
http://forum.xda-developers.com/showthread.php?t=1015853
goodintentions had a video review for his, on that thread but the link does not seem to be working.
I need a keyboard rarely, when I am typing out a big email. It is functional for that purpose. Some minor cons as I see are
1. Even with tabs on 3 sides, it can slip out of the 4th side, so you have to hold it right. Am thinking of adding a Velcro strip on the 4th side.
2. The leather is suspect, and it stunk up my room for a few days after I opened it.
3. It adds quite some weight.
4. Have to reboot the gtablet after connecting the keyboard most times for it to work.
5. The keyboard connects to the big USB, the small USB is covered by the left tab. But I rarely use that when it is in the case.
But it is $25, the USB cable length is fine, and it does have a magnet for the USB cable !!!
I bought one of these cases off ebay, just waiting for it to arrive. I bought one "specifically" made for the gtablet, with the tabs not blocking the usb port. I know I could of had one for less, but would have had to mod the case to fully work with the gtablet. I was actually looking at the one OP posted to save a few bucks, but I didn't like the way the case was designed, with no tabs to hold the tablet in place on the sides.
Related
Sorry if this has all ready been talked about, but is there a case with a built in keyboard? I am planning on using this for school while tethering from my droid
if there is not a case with a built in keyboard what is your best suggestions for screen protectors or hard cases?
I was just thinking the same thing, I see alot of cheap ones on ebay, but the dimensions are set to to fit an ipad(7.5"x9.8"), but the gtab is 6.8"x10.5", I dont want part of the screen cut off, or part of the tablet hanging out of the case.
Hey, I found a nice keyboard, case/stand combo on amazon, heres the link:
http://www.amazon.com/Viewsonic-G-T...3LRLVE&s=merchant-items&qid=1300939884&sr=1-1
It's a wired keyboard, but that's fine with me, keeps me from having to worry about recharging my keyboard battery on top of the tablet battery.
If you look at the posts that were here already in the Accessories forum, you will see that this is actually a fairly hot topic and there are several options available.
I got one of these and its perfect
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350443208672&ssPageName=STRK:MEWNX:IT
Similar Question as OP/ slightly different.
I need some opinions guys from those who have the keyboard cases and those who have just a standard case which angles.
Can you use the usb keyboard case comfortably with the keyboard folded all the way under the tablet?
( meaning if i just want to hold the device with 1 or 2 hands while watching tv is it comfortable?)
How often do those with the keyboard actually find themselves using the keyboard?
Is the virtual keyboard just as accurate with auto spell correct?
Question #2
Also is it worth buying a screen protector if your using a case? Its not like the device will be placed in my pocket and get scratched with my keys.... thats the only reason I buy screen protectors for my epic 4g.
I say pass on this case
juanaraya92679 said:
I need some opinions guys from those who have the keyboard cases and those who have just a standard case which angles.
Can you use the usb keyboard case comfortably with the keyboard folded all the way under the tablet?
( meaning if i just want to hold the device with 1 or 2 hands while watching tv is it comfortable?)
How often do those with the keyboard actually find themselves using the keyboard?
Is the virtual keyboard just as accurate with auto spell correct?
Question #2
Also is it worth buying a screen protector if your using a case? Its not like the device will be placed in my pocket and get scratched with my keys.... thats the only reason I buy screen protectors for my epic 4g.
Click to expand...
Click to collapse
1.) The case feels bulky in your hand if you fold it back to read something on the tablet while holding it especially with one hand. I found it really uncomfortable to leave it in the case for use when not typing on the keyboard.
2.) I used it often when I first bought the case then got another keyboard and case as this case really looks and feels cheap and I work with professionals so it really stuck out like a sore thumb in meetings.
3.) The "virtual keyboard" if you mean the keyboard that comes up on your tablet then I would say your question doesn't apply since the case keyboard doesn't make any spelling corrections (at least mine didn't) whereas the virtual keyboard(s) do offer corrections and suggestions for word completion.
Your question #2 which is really question 4.) If you want to use this case with keyboard then I would strongly recommend getting a screen protector as this keyboard isn't soft silicone but rather it's hard plastic. And since the gTab won't be snug in this case but will move quite a bit around the screen can get some rubbing damage if you keep it in the case a lot. Some people have suggested you use a soft rag and lay it on top of the keyboard when you close the case and also to use velcro or double-stick tape to secure the gTab to the case better.
In the end, I would just recommend you NOT buy this case since I just sold mine off on eBay. For the price it's not bad but once you start using it you will quickly find things to complain about it.
Fellow user it2Steve here on the gTab forums have several nice cases and soon one with a built-in bluetooth keyboard available for sale. Check out his threads and read his reviews. Hopefully you find what you're looking for.
i bought 2 of these ones...
http://cgi.ebay.ca/ws/eBayISAPI.dll...965439&ssPageName=STRK:MEWNX:IT#ht_798wt_1139
but the usb cable isnt long enough to reach the left side, and one of the holders is RIGHT where the usb plug goes in....so i'm going to have to do some modding
DaveyBoy2002 said:
i bought 2 of these ones...
http://cgi.ebay.ca/ws/eBayISAPI.dll...965439&ssPageName=STRK:MEWNX:IT#ht_798wt_1139
but the usb cable isnt long enough to reach the left side, and one of the holders is RIGHT where the usb plug goes in....so i'm going to have to do some modding
Click to expand...
Click to collapse
I have one too, quick fix is I had a usb mouse pad firm with lights and many usb plugs and I sit the case on that which is a nice flat surface and plug the mouse pad into that. I am using it now to type.
DaveyBoy2002 said:
i bought 2 of these ones...
http://cgi.ebay.ca/ws/eBayISAPI.dll...965439&ssPageName=STRK:MEWNX:IT#ht_798wt_1139
but the usb cable isnt long enough to reach the left side, and one of the holders is RIGHT where the usb plug goes in....so i'm going to have to do some modding
Click to expand...
Click to collapse
I have a similar one, but in the end I found that I didn't really an exterior keyboard as much as I thought I did.
BlutO keyboard case
On the site called electroniccrap dot com there is a case and keyboard. They are currently sold out, but it looks interesting...
****
Did you look at this? I looks promising.
http://forum.xda-developers.com/showthread.php?t=963019
MechAniX.one said:
Did you look at this? I looks promising.
http://forum.xda-developers.com/showthread.php?t=963019
Click to expand...
Click to collapse
I am waiting for these to come in. Although in the images the case looks a little "cheap". I can't tell what the material is made out of.
I've been looking for a solution that would offer an easier way to hold the TF with one hand and still allow full 360 rotation. I came across these two on Amazon and I was wondering if anyone here has tried them. Here's the quick pros & cons that I can see:
Hand-e-holder: http://amzn.to/jQ5jzc
+ Hold with one hand / 360 rotation
+ Comfortable wide neoprene backing for your hand
+ Size doesn't matter Uses an adhesive disc to mount one side of the holder to the back of your tablet - so it should work with any tablet out there
- I see the adhesive as a con also - not sure I want to stick anything on the back of my TF. Plus, once it's stuck on there it's semi-permanent in that you can't take it off one day and then stick it back on the next (you'll need to buy a new disc for $6)
- Price is kinda high IMO at $40
Video (47 seconds in): http://video.foxnews.com/v/966135816001/gadget-gift-guide-for-dads/
HeloStrap: http://amzn.to/jKnO39
+ Hold with one hand / 360 rotation
+ Comes in multiple colors (red, green, blue, black)
+ Price: Only $25, so $15 cheaper than the Hand-e-holder above
+ Attaches to your tablet via elastic bands or grips so you can easily attach or remove it. Also will work while your table is in a sleeve.
- "Officially" only supports ipad, ipad2, & Xoom. I did a comparison and while the TF is longer on one side, it's shorter on the other. So I jumped into my wayback machine (and google) to figure out the "hypotenuse" and it looks like the TF is ~20mm longer. From what *I* can see of the HeloStrap in the images it certainly looks like the elasticity could accommodate that extra 20mm.
- The part of the HeloStrap that your hand fits into doesn't look as comfortable as the Hand-e-holder. Actually, that was the only con mentioned for it on the Amazon reviews - that it could be a tad more comfortable. But it also wasn't bad enough for folks to warrant it any less than 4 stars.
Video: http://www.youtube.com/watch?v=IpZ4-pdq3ag
I put in an order for the HeloStrap (black) because I like that I can pop it on and off easily - with or without my TF in the sleeve. I'll post back here when it shows up and let folks know how it works out.
I'd still like to hear from anyone else that's tried one of these - OR that has found another option that allows for the 360 rotation.
Please post up how you like it when you get it.
I smell a broken Transformer...
frosty5689 said:
I smell a broken Transformer...
Click to expand...
Click to collapse
LOL
Ya thing so?? Why? The HeloStrap seems to hold fine on the iPads - and it will be a bit more snug on the TF.
Even on the other one, the adhesive seems pretty tight.
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Unfortunately neither one was Amazon Prime so it may take a several days to get here. Hopefully before the weekend though and I'll be sure to report back!
Never even knew anything like these existed. Of the two I like the HeloStrap more... really tempted to buy one, but I've wasted too much money lately so ill wait for a review.
pogul said:
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Click to expand...
Click to collapse
Exactly. Worst case scenario for me would be it falls onto me lol.
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
I look forward to impressions
skeeterpro said:
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
Click to expand...
Click to collapse
What? You'd likely shatter your pad doing that no matter what.
I went a similar but slightly different route with the Padlette (padlette.com) which I bought off of Amazon. It's not as fancy as the other options, but it's pretty heavy duty and I have little to no fear about it breaking or slipping off. You can either hold it in one hand or you can slip you hand in behind.
In either case, an option worth looking at.
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Also, a question about the Helo, Do the straps at the corners mark/scratch the tablet trim or screen?
Excellent FIND...and I think I am tending towards ordering one too....
I will do more research as well and keep you'al updated...
Good luck with yours.
Regards,
Misfitz
nv88 said:
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Click to expand...
Click to collapse
I find it very comfortable. I was participating in an event this weekend that required that I hold the pad for roughly four hours and I did so with no problems. You can either grab it with your fingers (my preferred method) by hooking them around the straps, or you can simply slide your hand in behind.
Because it's at the same angle in either portrait or landscape it's equally easy to hold it in either configuration. I also like that it's removable without leaving any evidence that it was there. The only (minor) problem I've seen is that I have to have it oriented in SW to NE because in the NW to SE direction it covers up the volume rocker.
Thanks. I'm very interested in the padlette... sounds like it may be worth $20.
Sorry for the delay in following-up. I wanted to put a short video up, but my Sony Vegas just hasn't been cooperating with me.
I received the HeloStrap last Thursday and finally had a chance to play with it last night.
Overall, I think it's great. I definitely agree with the 4/5 stars rating on Amazon. The only con being that the hand part of the strap could have been more comfortable. It's not horrible by any means. You just notice it when you first start using it, but then quickly forget about it.
It still looks like the Hand-e-holder would win in the comfort category, BUT - I prefer the HeloStrap because of the lower price and the fact that I can slip it on or off easily vs having to semi-permanently stick the Hand-e-holder on. If I didn't have the Asus sleeve for my TF that probably wouldn't be as much of a factor.
BTW, the HeloStrap gives a nice snug fit on the Transformer with or without the sleeve. It's snug, but not so tight that it would be a concern (this is what I wanted to show in the video). It definitely feels very secure - I don't see the TF "falling out" of it or anything.
It certainly made the couch surfing MUCH more enjoyable last night which was my primary goal!
If I didn't have the sleeve I would be much more tempted to try out the Hand-e-holder, but the HeloStrap is the one that gives me the option of using it easily with the sleeve or without. Now i just need to see if my wife can come up with some idea for making the hand part a lil cushier!
I'll take another crack and getting a video together and will post that as soon as I can.
I finally got around to shooting a quick video of the HeloStrap on my TF. Hopefully this will give you an idea of how it fits - with and without the sleeve.
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
lost101 said:
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
Click to expand...
Click to collapse
Not sure, but given that it's a full sleeve/case made to fit the ipad, I don't think it would work for the TF. The dimensions are too different.
The HeloStrap just needs to stretch diagonally from one corner to another - whereas that sleeve360 would have to fit all 4 corners.
Let us know if you give it a shot though!
That extra tension on the corners of my Transformer would amplify the screen bleed issue I'm having by 200%. Looks cool though.
Sent from my Transformer TF101 using Tapatalk
Know what - I think you can stick this to the outer part of your folio and use it. So that the TF remains pristine.
Even better - with the Techtree stand, you can create your own 360 degree rotating hand holder.
I was at Fry's today and decided to look at cases. They had none for the Asus but they had one for the Toshiba 10.1 Tablet. I did not have the EEE with me but I went ahead and got it. List was $59.99 but they matched online price so I got it for about $42. Here it is:
http://www.amazon.com/Toshiba-Thriv...?s=electronics&ie=UTF8&qid=1309054174&sr=1-11
So far I love it - it fits well and has access to all the important stuff (except camera). I don't know if I will keep it. I also love the quality and the fact that it rotates 90 degrees from Portrait to Landscape.
It does say TOSHIBA on it but that is also a good thing - if it said ASUS there would be a much bigger chance that it would get stolen.....
Anybody else have this?
i bought a case for the Toshiba too from best buy, $40...lil different from yours but made for the same tablet...i am happy with it...it works just fine...excellent build quality too...no camera access without sum modifying but overall just wat i needed...
http://www.toshibadirect.com/td/b2c/adet.to?poid=512069
MasterJack said:
http://www.amazon.com/Toshiba-Thriv...?s=electronics&ie=UTF8&qid=1309054174&sr=1-11
So far I love it - it fits well and has access to all the important stuff (except camera). I don't know if I will keep it. I also love the quality and the fact that it rotates 90 degrees from Portrait to Landscape.
Click to expand...
Click to collapse
I really like that! been looking for a case which uses bumpers to hold the tablet. How well does it actually fit (is it slightly loose, too tight that it bends the clips slightly or just right?) and are the lengths good?
Any chance you could post pictures because I would really love to get this if it fits good!
I also forgot to ask if the holes for docking the keyboard are unobstructed?
masterjack said:
it does say toshiba on it but that is also a good thing - if it said asus there would be a much bigger chance that it would get stolen.....
Click to expand...
Click to collapse
lol lol lol lol
Definitely interested in seeing pictures of this. I bought the case that Staples has, but I'm not satisfied with it at all.
Bumping this thread. Has anyone else tried this case? Have any pics to share?
Looking at the specs, the Toshiba is 6mm taller (in landscape mode). Do the clips hold the TF securely? Thanks.
I just received it...very disappointing.
Hey everyone. I just wanted to let you know that I ordered this from Amazon thinking it would be a good fit. It was somewhat close, but it does not hold the TF securely. I could easily see the tablet sliding all the way out and hitting the floor if you were not paying attention. In fact, when in portrait mode the tab slides out on most of the angles. There are some fairly big gaps.
I have uploaded some pictures, so hopefully they will illustrate some of the issues.
It is also poorly put together. The tab that snaps in place was loose. I barely pulled on it and it came out somewhat such that now it is off angle and no longer lines up naturally to secure the tab.
On the plus side, it would leave openings for accessing anything you needed to and also folds down flat so you could just use it in your hands.
Bottom line, I am sending it back.
Hope this helps others who where/are interested.
^^^
Feel bad for you man, never understood the attraction with the clip type cases, those things are made of plastic, one involuntary quick movement and this thing could send the Tf flying. The wrap around cases are much better at overall protection.
It's not a big deal. I know that I am picky and was fairly sure I would be sending it back. I didn't have enough experience with these to even know about the clip type cases, so I am glad that I now know to avoid them in the future. I mostly just wanted to let the few people that had bumped this post know that the product was maybe not so good and provide the pictures that had been requested.
I actually like the clip style. I just wish there were options similar to those that the iPad has, where the back is basically a plastic shell that clips. My wife has a Targus case for her iPad2 that does this. Personal preference, I guess. I wouldn't be against a non-clip case if it was very well implemented. I picked up the Solo case from Staples as a temporary measure until some more options are available. Works OK, but I really don't like the corner-cover means of securing the tablet.
Disclaimer: I am not affiliated with Speck, Barnes & Noble, or Amazon. I do not profit, or gain anything by this recommendation. It's just a personal discovery that made me happy and thought it might be helpful to other NSTR users.
For some reason all the B&N official Nook cases are way thicker and bulkier than they need to be. Also most third-party cases I looked at were faux-leather with huge messy stitching as if they were part of a Frankenstein cosplay competition.
Being super picky about these sorts of things, I put off buying a NSTR case while obsessively trying to find one that was:
1. Slim (All these giants cases defeat the purpose of a tiny portable ereader)
2. Play-through (I can leave it on while using, ie not just a slip-cover I can lose)
3. Protective (Not soft)
Well, I've been looking high and low, reading all the Nook forums with no luck until recently when I finally found this case: (I can't post links yet, so just search on Amazon for "Nook touch fitfolio"
Speck FitFolio for Nook Simple Touch Reader.
I saw it at Target for $29.99, but bought it on Amazon for just over $21. It looks like the price fluctuates a bit (it's $24.83 right now).
I got the black one, I got my wife the teal one. It also comes in purple.
wow, the blue one is really ugly. :-D looks like a lunch box. The grey one is nice.
I am using a cover bought from B&N, it is a bit thicker and larger but at least it protects my nook well from pressure and falls. That cover above seems to slim, I don't belive your nook would survive if it falls e.g. on the corner. Mine did several times.
Can you lock the front side of the cover to the back side (while reading)?
Cases
I use the Silicone skin. It's relay nice and absorbs most of the shock of a drop.
http://www.barnesandnoble.com/p/silicone-frame-in-graphite/22315829
cceerrtt said:
I am using a cover bought from B&N, it is a bit thicker and larger but at least it protects my nook well from pressure and falls. That cover above seems to slim, I don't belive your nook would survive if it falls e.g. on the corner. Mine did several times.
Can you lock the front side of the cover to the back side (while reading)?
Click to expand...
Click to collapse
1. I've looked at each and every official B&N cases in detail and found all of them, frankly, to be really lacking in several areas. The Speck case has a much more secure attachment system as well a good shock absorption due to the material and the shape of the case. Also, as I mentioned, it is much more form fitting than any of the B&N cases.
2. Yes, you can lock the front cover to the back while reading.
I should have mine next week!
Based on your recommendation I ordered one, and I should have it next week. I will let you know how it works out.
Edit: I just exchanged my NSTR at B&N a couple of days ago as it had a cluster of stuck pixels. I had no problems, but the employee said that it could have been caused by something being pushed down on that screen at that point. This is why I decided to get a case, as I don't want it to happen again!
Musulsa said:
1. I've looked at each and every official B&N cases in detail and found all of them, frankly, to be really lacking in several areas. The Speck case has a much more secure attachment system as well a good shock absorption due to the material and the shape of the case. Also, as I mentioned, it is much more form fitting than any of the B&N cases.
2. Yes, you can lock the front cover to the back while reading.
Click to expand...
Click to collapse
jhedfors said:
Based on your recommendation I ordered one, and I should have it next week. I will let you know how it works out.
Edit: I just exchanged my NSTR at B&N a couple of days ago as it had a cluster of stuck pixels. I had no problems, but the employee said that it could have been caused by something being pushed down on that screen at that point. This is why I decided to get a case, as I don't want it to happen again!
Click to expand...
Click to collapse
Edit: I reviewed the description & it DOES say the bungee is "two-way", so I am assuming it is designed to work that way - it just seemed a bit of a tight stretch. No biggie for me, as I don't think I would be attaching it any - folded back works fine.
Just received mine today. It really has a nice feel, and I think it will protect it well. Thanks for the recommendation!
P.S. The cover DOES fold back upon itself, but I wouldn't say exactly say it "locks" (rather, I would not want to, as it would overstretch the "bungee").
EDIT: I just reviewed the specs, and it does state that the bungee is "two-way" - it just seemed a bit of a tight stretch. No biggie for me, as it works well, simply folded back, and not attached.
So the folded cover is not "fixed" in the folded position? Could you upload more photos?
Mine nook cover is magnetic and therefore folded front & back cover keeps together, moreover when bonded with magnetic clip.
I have bought aluminium case for my NST. It has 3 positions for reading. The NST clips inside so it wont fall out. It has a black padding inside and it seems to be thinner then all those folding leather ones. The disadvantage of this cover is -> when you open the cover and flip it at the back, so it flat ... it's kind of awkward to read it like that, because of the round shape. It just feels
Since this is one of my first posts in this forum, I can't put the LINK for the cover. but if you would go in UK Ebay and type in search : aluminium nook ... you should see it. it cost 12.99GBP.
But now with the "keayboard hack" ... I'm thinking about finding a way how to modify the cover for 10" tablets with keyboard so it can hold the NST. That's what kepps my mind busy at the moment.
I agree completely with the Speck case. I too do not see the need for B&N making such large covers for such a small device. The Speck cover is just barely bigger than the nook and is comfortable to hold with the cover folded back and secured. The nook snaps in and out of the cover very easily. If you fold the cover back and secure it, it stays level and has enough grip to not slide if you prop it against something to read. I would prefer a magnet or snap closure, but after several uses the bungee gets easier to fasten. Very satisfied with this cover.
I found the Specs cases at my local Target. Prices varied from $29.99 for the standard colored (blue, purple, green) cover to $34.99 for a black 'leather' version. They did not show up at the online Target.com site. Very nice. I may have to get one.
I have ordered Industriell Cover in Carbon with Lyra Light and Anti-Glare Film when bought my Nook. And right after my order came to me in B&N store appeared Silicone Covers and Stella Light. I`d rather bought them...
What I don`t like in my cover is the way Nook is mounted into it. Why not to fix the book with four of these latches. Another thing is the size, tried to find anything that adds less to the sizes of the Nook itself.
Also in this theme I saw Speck cover, if I knew of it earlier I`d mostly bought it. But now I don`t need two covers so... I use what I use...
Dagon.Alex said:
I have ordered Industriell Cover in Carbon with Lyra Light and Anti-Glare Film when bought my Nook. And right after my order came to me in B&N store appeared Silicone Covers and Stella Light. I`d rather bought them...
What I don`t like in my cover is the way Nook is mounted into it. Why not to fix the book with four of these latches. Another thing is the size, tried to find anything that adds less to the sizes of the Nook itself.
Also in this theme I saw Speck cover, if I knew of it earlier I`d mostly bought it. But now I don`t need two covers so... I use what I use...
Click to expand...
Click to collapse
I have the same case, and it's not that easy to hold. And trying to press the buttons on the left just makes the entire thing flip. Also, what changed between the Lyra Light and the Stella Light?
Have no problems holding it.
Don`t like how left buttons are pushed myself that`s on what I said about latches.
Stella looks just prettier then Lyra. Also Lyra just unbends when Nook is being shaked(while reading in bus or other transport)
cceerrtt said:
So the folded cover is not "fixed" in the folded position? Could you upload more photos?
Mine nook cover is magnetic and therefore folded front & back cover keeps together, moreover when bonded with magnetic clip.
Click to expand...
Click to collapse
I think that's the one I got: I would normally never buy a case made by the device manufacturer, but I picked this one up at Best Buy for (I think) $15: it's two stiff boards, just wider than the Nook Touch itself, with a hinge at the top, with a magnetic clasp that can also be used to hold the front and back cover together as a stand when they're folded backward. The whole thing is light, compact, and protective--and not any harder to read in the case than out of it (plus, if you need a reading light, it's easier to clip it to the cover than to the Nook itself). You can even charge the device without opening the cover, though you do have to move the clasp aside.
This case must be discontinued, though, because now I can't find it on either the B&N or the Best Buy site.
I didn't like any cases available for the nst. Till I made one. What do you guys think?
Awesome. Went making such myself
larryflynt said:
I didn't like any cases available for the nst. Till I made one. What do you guys think?
Click to expand...
Click to collapse
Good work, very cool. Did you use a book, or some sort of journal? I have been wanting to do something like this, but do not have any books that I am willing to cut up.
Sent from my SCH-I500 using xda premium
It was a blank journal that was 5.75x7in. It was tight fit but I managed.
I searched far and wide for a case for my STR and I thought about getting a Speck FitFolio until I saw one in person in Target. Seemed too flimsy. Anyway, after a long search I found Oberon covers. Solid drum dyed tooled leather, about 3/16" thick. Not cardboard covered by a thin strip of 'leather'. They come in many designs and colors and cost about $15 more than a high priced B&N cover, which is OK, because I think it will last a lifetime.
I do not work for, nor am I affiliated with Oberon Designs. I'm just a very satisfied customer.
The oberon case looks familiar:
Hey guys I have been searching for a long time now for a folio style case that will fit the transformer WHILE docked. Searching here found me nothing.
I have only EVER found two (on amazon) that fit exactly what i am looking for but they have had mixed reviews.
I was just wondering if anyone else has seen anything like or has any experience with the following cases:
This one has a removable section for the keyboard dock which clips on to the main tablet case (which has its own cover for when not using it with the dock)
http://www.amazon.com/ASUS-Transformer-KeyBoard-Portfolio-MiniSuit/dp/B005JFIS50/ref=lh_ni_t
This one is a single piece built for use with the dock all the time.
http://www.amazon.com/Asus-Transformer-Keyboard-Docking-Black/dp/B005GR0YUI/ref=lh_ni_t
Thanks in advance guys.
I bought this one from amazon, and I love it.
http://www.amazon.com/gp/product/B006MVUQGY/ref=oh_o00_s00_i00_details
BULL3TPR00F said:
Hey guys I have been searching for a long time now for a folio style case that will fit the transformer WHILE docked. Searching here found me nothing.
I have only EVER found two (on amazon) that fit exactly what i am looking for but they have had mixed reviews.
I was just wondering if anyone else has seen anything like or has any experience with the following cases:
This one has a removable section for the keyboard dock which clips on to the main tablet case (which has its own cover for when not using it with the dock)
http://www.amazon.com/ASUS-Transformer-KeyBoard-Portfolio-MiniSuit/dp/B005JFIS50/ref=lh_ni_t
This one is a single piece built for use with the dock all the time.
http://www.amazon.com/Asus-Transformer-Keyboard-Docking-Black/dp/B005GR0YUI/ref=lh_ni_t
Thanks in advance guys.
Click to expand...
Click to collapse
dougstoner said:
I bought this one from amazon, and I love it.
http://www.amazon.com/gp/product/B006MVUQGY/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
is it a problem to use this case *without* the dock as well? i like to hold the tablet to read comics etc alot without the keyboard in the way
pyro224 said:
is it a problem to use this case *without* the dock as well? i like to hold the tablet to read comics etc alot without the keyboard in the way
Click to expand...
Click to collapse
Yes and no. without the keyboard in, there is nothing to keep it from sliding out the bottom, but you can hold it. I'll upload a pix when I get home from work showing it if you want. Kind of hard to explain.
Sent from my PG86100 using xda premium
Thats why i was leaning more towards the one with the removable part for the keyboard (the first one i linked to).
That way you can use it with and without the keyboard and still be fully covered.
personally i find all these cases aesthetically horrible, i really dont want huge triangular bits of leather on the keyboard corners and the leather around the screen it just makes what is a beautiful tablet look like something out of miami vice!
but maybe thats just me.
LOL i do agree with it taking away from the beauty of the tablet, but im not a fan of sleeves and need something that i can keep on it at all times or whenever i need it. There are so many nicer ones (i.e the official transformer folio, looks smiliar to the ones made for ipads), but they are made for the tablet alone and must be removed to dock it, which sucks.
BULL3TPR00F said:
LOL i do agree with it taking away from the beauty of the tablet, but im not a fan of sleeves and need something that i can keep on it at all times or whenever i need it. There are so many nicer ones (i.e the official transformer folio, looks smiliar to the ones made for ipads), but they are made for the tablet alone and must be removed to dock it, which sucks.
Click to expand...
Click to collapse
try the blurex case, its the best i have found, you can charge it with the case on and use the dock with the case on, you just cant fold it fully closed.
Link please?
BULL3TPR00F said:
Link please?
Click to expand...
Click to collapse
http://www.amazon.com/BLUREX-Leather-folio-Multi-Angle-Transformer/dp/B005ESY8VA
like i said you cant close the case completely with the dock attached, but when i am out and about i just detach the dock from the tablet and put the whole caboodle in this:
http://www.amazon.co.uk/Protective-...EC/ref=sr_1_32?ie=UTF8&qid=1327364719&sr=8-32
Yeah i remember seeing that blurex one and loved it because it doesnt have a bezel it has less noticeable clips which shows off the transformer much better. How is the hold though? how exactly does it work?
But yeah im not a fan of sleeves. so that would be out of the question for me (although it seems like thats the only option sometimes)
BULL3TPR00F said:
Yeah i remember seeing that blurex one and loved it because it doesnt have a bezel it has less noticeable clips which shows off the transformer much better. How is the hold though? how exactly does it work?
But yeah im not a fan of sleeves. so that would be out of the question for me (although it seems like thats the only option sometimes)
Click to expand...
Click to collapse
you slide the tab in under the clips.holds it perfectly you don't even notice the tabs are there.its perfect!
Sent from my GT-I9100 using XDA App
I'm in the same boat
Yeah, BULL3TPR00F, I'm in the same boat in terms of what I want.
I'm not sure if its possible though, you'd think at least Asus would have put something together that did the job otherwise (let alone all the custom makers).
I think that blurex looks like it might be the best of average solutions to the problem. One thing I am concerned with is are the clips gonna eventually loosen/break if I'm constantly switching the tab between the dock and case?
bob dylan, do you have an opinion on that?
wafflestheclown said:
Yeah, BULL3TPR00F, I'm in the same boat in terms of what I want.
I'm not sure if its possible though, you'd think at least Asus would have put something together that did the job otherwise (let alone all the custom makers).
I think that blurex looks like it might be the best of average solutions to the problem. One thing I am concerned with is are the clips gonna eventually loosen/break if I'm constantly switching the tab between the dock and case?
bob dylan, do you have an opinion on that?
Click to expand...
Click to collapse
i very much doubt the clips would break, i dont know what they are made out of but they are sturdy as hell, i cant bend them at all when i press on them or try and twist them( maybe some kind of metal skeleton underneath? dunno). this case is very well made indeed, the clips do not leave any mark on the tablet at all.
---------- Post added at 04:37 PM ---------- Previous post was at 04:30 PM ----------
just to clarify, with the blurex case i dont ever take the case off when using the keyboard dock. the case is fine with the dock as the back of the case just folds up behind the tab when the dock is connected and the keyboard is being used flat on a surface.
the only draw back to this case is that it doesnt close fully when the keboard is attached, you can close the tablet and the dock the usual way you just cant close the case fully. so for me i dont have a scenario where i need to take the case off.
when i want the tablet on its own i just take off the dock
when i want the dock attached i attach it and fold the back of the case up behind the tablet
when i want both and i am out and about i take the dock off and put the cased tablet and dock in a neoprene sleeve.
I ordered the same Minisuit case you linked originally, with the removable dock part.
In theory I think this fits my use case best. I have a toddler, and also toss it in my computer bag, so I wanted it protected/always covered, if it is docked or not.
I do really like the case. Its seems OK quality for $30. Having the ability to undock it and carry around just the tablet is great. I found that I was carrying around both the dock and the tablet often because I was worried about something scratching the screen. So Now, I carry just the tablet around with me much of the time, with the folio case protecting the screen.
Typing with the dock/tablet sitting in my lap is much better with the case on. It makes the base less rounded, so it is less enclined to tilt forward in my lap. Plus the corners of the case raise my wrists up off the keyboard slightly, which makes it feel more comfortable.
The case seems to be a little fiddly though.
The hole for the camera on the back sometimes gets in the way of shots.
It sometimes the tablet doesn't want to connect to the dock without undoing the elastic bands that keep the cover secured to the dock. I've just started leaving those un-done, since even if it connects, it seems to limit the tilt angle. And the elastic strap sometimes covers the charging light on the dock. And that works mostly ok. The snaps on the back sometimes are hard to work as well.
Thanks for the detailed description, you mind uploading some pics from various angles and what you were mentioning about the straps and whatnot.
Thanks!
BULL3TPR00F said:
Thanks for the detailed description, you mind uploading some pics from various angles and what you were mentioning about the straps and whatnot.
Thanks!
Click to expand...
Click to collapse
Before I bought it, I stumbled on this review. Check out the 5th image here (also a decent review, lots of pictures)
http://www.transformerforums.com/forum/asus-transformer-accessories/6182-minisuit-folio-case-review-tuff-luv-clone.html
You can see the elastic strap that keeps the underside of the case attached to the dock. Scroll a bit further down, and you can see the picture of the two attached together. The reviewer didn't seem to have any problems with the straps. I can make it work ok with them on, but it just seems to make docking a bit harder...and it definitely seems that they get pinched when reclining the screen back fully.
But they're not really needed. If you have the two pieces snapped together, the snaps hold the base piece in place. Really what the straps do is to keep the case from falling off the dock when the transformer isn't docked. And you could put the straps back on in that case...
Cool thanks
I own a real Tuff-Luv case and really like it. Worth what I paid even if that's about double what that clone costs. It does add some bulk.
Sent from my Transformer TF101 using Xparent Purple Tapatalk
Yeah i decided to splurge and grab the real Tuff-Luv case off amazon (Veggie leather, never seen the genuine leather anywhere aside from the official site). It is quite expensive but i do believe the build quality will be better than the knockoffs (also the MiniSuit knockoff does not have a cutout for the left speaker, and ive heard of minor issues with alignment of the holes (for cameras, etc).
when it arrives in a couple weeks, i will post pictures.
for now:
http://www.youtube.com/watch?v=cqWySeVbdCg
and
http://www.youtube.com/watch?v=h_0AyI1JBg4