[q] please help me it's urgent - Sony Ericsson XPERIA X10 Mini

Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.

Easy get seus and reflash your phone stock or boot into recovery ,,, using charging phone power on phone unplug charger use a back up ,,if you can't start again rember to do back ups
saurabh12311 said:
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Click to expand...
Click to collapse
thanks again slade 87 ,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 ) ps3 (langtoes) ask my anything , I COULD KNOW THE ANSER OR I MIGHT NOT ,

still hanging in death rope
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

Ooooooo you have a mini ,,,not pro ok you got the rong rom ok there is a hard reset. http://www.youtube.com/watch?v=2cvExle8S4o&feature=youtube_gdata_player
saurabh12311 said:
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Click to expand...
Click to collapse
,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 )

I DID ALL SUCH THINGS BUT NOTHING GO RIGHT 4 ME IS THERE ANY OTHER SOLUTION ,I READ ABOUT FLASHTOOL IN FORUM CAN U PLZ EXPLAIN IF BY THIS I CAN DO SOMTHING BUT PLZ EXPLAIN IN DETAIL

I had the same issue it restarts by itself n go into looping, remove the battery place it back, connect ur phone to SEUS by holding back button and plugging the USB

xperia mini10
in mini 10 battery is not removable & my basic operating files are deleted show when there is no operating file how it'll starts a home screen thats y i m asking u and other frend's is there any other method to re install operating 2.1 or any thing to start my phone again so i can do after that any thins otherwise nothing is worth 4 me saddddddddddddd

If your recovery (xrecovery or clockwordmod) works fine, what about removing your SD and plug it to a PC in order to copy a 2.1 ROM and then install it through recovery?

please ell me
plz tell me in which folder i'll put that files , basically allready tried all even my update zip is also there how to do and wht 2 do plz explain is there any method to recover from sdcard or through any other software
is there xrecovery file work from pc do u have exe file so plz sen me
[email protected]
is there any method to format c drive of phone bcs when ever i'm trying
through pc companion it'll tell in last stage to use usb storage but y phone is not starting so how could i do this nothing work 4 me plzzzzzzzzzzz any one give me solution I'm very depress my phone is even not going to switch off it'll starts again & again until battery drained
i deleted my three files from c/: x recovery.tar, con. & busy box

saurabh12311 said:
when ever i'm trying through pc companion it'll tell in last stage to use usb storage but y phone is not starting
Click to expand...
Click to collapse
That's weird because 7 hours after i brought my X10 mini pro i already bricked it , so i fire up SE PC companion and i followed the instruction to _repair_ the phone and no access to USB storage was needed that i remember.
It simply downloads and flash to your phone.
Unfortunately i'm still a newbie so i suppose and i haven't all the right answers
Keep trying with SE repairing and good luck with that!

Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....

Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....

thanks dear but finally my phone is ded I sent my phone to customer center but after checking they told me no hope phone will not recoverd..........
half knowledge is always dangerous is true for me I lost my money

There is no way that seus could not fix your phone and even if it couldnt se has a duty to repair it free of charge in the first 12 months !
Sent from my U20i using XDA Premium App

SEUS wont fail!

galvic said:
SEUS wont fail!
Click to expand...
Click to collapse
Quote that and DON'T THROW IT AWAY. USE flashtool. I got mine bricked and that was a great solution.
If you still have it i'm gonna show you a guide to flashtool

Related

[Q] Stuck at S.E logo + can't restore!!

hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Painkille5 said:
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Click to expand...
Click to collapse
You have a faulty xrecovery installed mate!
Use SEUS to repair. Flashtool to root.
Once done, let me know. I have a safe, simple way of installing xrecovery (that works).
Also check http://forum.xda-developers.com/showthread.php?t=1054818
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Hl
Painkille5 said:
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Click to expand...
Click to collapse
Seus will reinstall 2.3.3.
Flashtool doesn't create backup.
Yes, if u made a backup through xrecovery, you can restore it.
But b4 installation of xrecovery let me know
Hit thanks if helpful.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Painkille5 said:
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Click to expand...
Click to collapse
You can use pc companion too.
Check these :
gadgets.apnafundaz.com/2010/07/downgrade-xperia-x10-to-original-generic-firmware-using-seus-new-debranding-method/
ucanphone.com/sony-ericsson/sony-ericsson-xperia-x10-update-service-165.html
www.livesony.com/forum/search.php?searchid=139999
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Painkille5 said:
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Click to expand...
Click to collapse
You should contact doomlord
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
who is doomlord?
Painkille5 said:
who is doomlord?
Click to expand...
Click to collapse
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
aR_ChRiS said:
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Painkille5 said:
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Click to expand...
Click to collapse
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
aR_ChRiS said:
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thats what i said i already know..
can you answer me to the rest of my questions please?
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate if you think you backed up properly from xrecovery and it still in sd card, use card reader to retrieve it to pc. The file should be under sdcard/xrecovery/backup/xxxxx.zip. then try recover it from working phone with xrecovery. Hope this help n good luck.
Sent from my SO-01C using xda premium
milton.bain said:
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
thank you very much!!!
when i will find a way to churge my battery ill tell you what ended up with this!
Thanks!!

Big problem..

Hi. Basically, my phone is stuck on the Sony Ericsson screen. I know it can all be fixed by re-flashing or clicking on the repair bit on PC Companion however the usb port is broken on the phone and my local shop couldn't repair it. Does anyone have any suggestions? The phone is worth nothing otherwise...
By the way, it is rooted and stuck on the SE screen because i deleted the stock launcher and then tried doing a factory reset on the phone (face palm moment...)
Thanks!
I guess there are flashable home app zips on some threads here...I guess donut thread has it...copy it to memory card using a card reader....
Reboot to xrecovery...flash it......
sEnT fRoM AGNI-5 tRuE iNdiAN
Could you elaborate more please? i'm not familiar with the stuff you mentioned..
Thanks,
Thomas.
which rom are u using right nw ????
I was just using the normal rom but rooted? But obviously i can't give much more information because i can't get into my phone...
http://www.mediafire.com/?txrq1o0ii24jmr1
give this a try...am nt sure ...
try downloading this zip....then save it in some folder on ur sd card....using an sd card reader if ur usb port is broken....
then reboot into xrecovery n flash this zip....
this might help u n install go launcher on ur cell....n u can access home
How do you reboot into recovery? And can you definitely do it on my phone?
Thanks!
Go launcher womt help as he did a factory reset. U need to grab flashtool pal and use that to install global generic firmware. U could try seus or pc companion also they may help
Edit: sorry didnt see bit about broken USB u need to look at this:
http://forum.xda-developers.com/showthread.php?p=13287756
Sent from my X10S using XDA
But i can't use them because of the faulty usb port right?
I can't seem to get into any 'recovery' thing? I've booted whilst holding the back button?
Flashtool wont work for sure ...
U have done a factory reset right? ?? So as told above installing another zip also wont workout...
Xrecovery might have gone...
One more thing...for instance if recovery is working u have to press back button once the led starts blinking ....n tats hw u gotta boot into it...
TomAshby said:
Hi. Basically, my phone is stuck on the Sony Ericsson screen. I know it can all be fixed by re-flashing or clicking on the repair bit on PC Companion however the usb port is broken on the phone and my local shop couldn't repair it. Does anyone have any suggestions? The phone is worth nothing otherwise...
By the way, it is rooted and stuck on the SE screen because i deleted the stock launcher and then tried doing a factory reset on the phone (face palm moment...)
Thanks!
Click to expand...
Click to collapse
Get ur usb port fixed..
Sent from my Xperia S using XDA

[Q] please save my x10 mini pro

My phone was just rooted and did factory reset yesterday.
After that my phone is crazy as many functions not working anymore,
Abyss ways to save my phone?
WiFi not working
Screen lock not working
Usb to pcbs can be detected but not able to connect
Home button not working
t-up
xksimon said:
t-up
Click to expand...
Click to collapse
device ?
things you did exactly ?
try a seus reset ...
matmutant said:
device ?
things you did exactly ?
try a seus reset ...
Click to expand...
Click to collapse
Eh? It is x10i forum, of coz i am using x10 mini pro
I told what i did in the first post already.... check it out plz
What is seus reset by the way.
If you can goto xrecovery install any custom rom that works with stock kernel...and later after installing custom rom use pc companion and flash the fresh stock rom
xksimon said:
Eh? It is x10i forum, of coz i am using x10 mini pro
I told what i did in the first post already.... check it out plz
What is seus reset by the way.
Click to expand...
Click to collapse
hmmm right, it's in title
you dunno SEUS ?
read miniCM7 miniFAQ, answers to your Q is there (in "usefull links" post)
Yashu1019 said:
If you can goto xrecovery install any custom rom that works with stock kernel...and later after installing custom rom use pc companion and flash the fresh stock rom
Click to expand...
Click to collapse
I didn't install xrecovery before the wiping, so there are nothing that i could do even i had xrecovery
How can i install custom rom? Since it is my first smart phone.
Moreover, right now the phone can't connecting to a computer at all.
I checked a lot of topics that required the phone is able to connect to a pc,
In order to install any custom roms.
matmutant said:
hmmm right, it's in title
you dunno SEUS ?
read miniCM7 miniFAQ, answers to your Q is there (in "usefull links" post)
Click to expand...
Click to collapse
Sorry i am new to this forum, can't found the topic that you are talking about.
Could you mind give me a direct link? Thank you!
the two threads on top of where you posted your thread ...
the ones with written "Read Before Asking Please"...
http://forum.xda-developers.com/showthread.php?t=1266911
the usefull links post : http://forum.xda-developers.com/showpost.php?p=17651751&postcount=3
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
LukBoy99 said:
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
Click to expand...
Click to collapse
Eh....
WiFi not working
Screen lock not working
Usb to Computer can be detected but not able to connect
Home button not working
That's mean even my computer has installed pc companion, The computer can't read the phone correctly, so it is impossible to recovery in this way
Yes i don't mind my phone becoming unrooted
LukBoy99 said:
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
Click to expand...
Click to collapse
If your provider didn't change the software on your phone too much, this will work. It will work best if you leave your phone disconnected from your pc until step 7
SmG67 said:
If your provider didn't change the software on your phone too much, this will work. It will work best if you leave your phone disconnected from your pc until step 7
Click to expand...
Click to collapse
Usb to Computer can be detected but not able to connect
U should try to connect to flash mode what I did when it was rebooting on self
1-removed battery till step 7
2-quickly insert it (dont even use back cover till ur done)then hold back button and plug the cable in ur phone untile led flashes(plug usb in pc b4 starting this)
Wish this helps
Sent from my U20i using XDA
If non of above helps ur last solution would be flashing stock kernel (which can be found on xda) with flashtool with the battery quick in and backbutton method but youll need ur bootloader unlocked
Sent from my U20i using XDA

[HELP]X10 Mini pro completely BRICKED.

Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help

[Q] damned my phone....help please

hi guys.....my friend gave me his xperia neo v to install custom rom .....his mobile doesnt hav root so as to root i downloaded the ftf file and when flashed through flash tool it stucked at 9 percent and then i unplug the usb as it has been stuck for half an hr......then after phone doesnt boot because i mistakenly wiped the data .....now what to do,,,,,,tell me please......my mind is presently not working at all.....please tell me what to do in brief and give me links for solutions if youare free ...thanks in advance
pessyforall said:
hi guys.....my friend gave me his xperia neo v to install custom rom .....his mobile doesnt hav root so as to root i downloaded the ftf file and when flashed through flash tool it stucked at 9 percent and then i unplug the usb as it has been stuck for half an hr......then after phone doesnt boot because i mistakenly wiped the data .....now what to do,,,,,,tell me please......my mind is presently not working at all.....please tell me what to do in brief and give me links for solutions if youare free ...thanks in advance
Click to expand...
Click to collapse
Remove battery and re-insert... Now hold the back button and plug-in the mobile.. Check whether the led glows or not.. If it is glowing then nothing has happened to that phone... Go to http://forum.xda-developers.com/showthread.php?t=1678690... Download whichever .ftf file you want... Place it in the firmwares folder of the flashtool installed folder.. Then connect your phone in flashmode and flash this .ftf... It will get you back to Stock ICS.. Your mobile will be a brand new, out of the box... Start rooting process all over again... PM me for further help...
cherry676 said:
Remove battery and re-insert... Now hold the back button and plug-in the mobile.. Check whether the led glows or not.. If it is glowing then nothing has happened to that phone... Go to http://forum.xda-developers.com/showthread.php?t=1678690... Download whichever .ftf file you want... Place it in the firmwares folder of the flashtool installed folder.. Then connect your phone in flashmode and flash this .ftf... It will get you back to Stock ICS.. Your mobile will be a brand new, out of the box... Start rooting process all over again... PM me for further help...
Click to expand...
Click to collapse
thanks done it....rootin process also done...cmw also installed......

Categories

Resources