[UPE/ROM/FFU]★(¯ `•.Windows Phone ® 7 for Toshiba Tsunagi TG01/T01A[7510_#1].•´¯)★ - TG01 Windows Phone 7 Development

[UPE/ROM/FFU]★(¯ `•.Windows Phone ® 7 for Toshiba Tsunagi TG01/T01A[7510_#1].•´¯)★
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
General Informatin Windows Phone ® 7 Image System:
This is a first develop. system Windows Phone for Device Toshiba TG01 codename: Tsunagi. All specifications tailored to the structure of the software. The image of the system, it is decompressed to the device, where is a general OS image partition. Rebuilt this system looks somewhat different than on other devices. The main bootloader like structure, like that of Samsung devices, or some HTC, and the way his work, whether in the executive options. A system is strongly stretched under tsunagi hardware requirements. However this does not work and the use of TG01.
Construction and Structure Informatin OS Image:
The image format will be D000FF/.bin, and so our current tools should work fine with this, if only we decopress the current file. In the first lines of the OS image, we recorded information about the device, addresses loading data partition. This is the header image, which helps when loading the operating system. Saved are in it also provides information about the version of the system. The physical flash layout will look as follows: Windows Phone 7 - ROM Deployment and how it will affect us. But we must remember about the changes that exist from the fact that it is a device with a different structure and its system partition is also a little different.
Current State of the System Image:
Currently the system has many drawbacks. The only problem is not operating the camera, it's probably one of the more imperfect During the update, windows phone, will be corrected all defects and faults.
About Info System Windows Phone for Tsunagi:
- Windows Phone: 7.0
- Platform: Tsunagi
- BLDR Version: 7.27.1.0
- Modem: DFP-SDCAOWZM-221001-1
- Software: Windows ® Phone 7
- OS version: 7510
- Firmware revision number: 7.00.7510.0
- Hardware revision number: 112.576.2.0
- Radio software version: 2.2.10.01
- Radio hardware version: 0.0.0.0
- Bootloader version: 7.27.1.0
- Chip SOC version: 0.36.1.2
About Info Supported Devices:
-Toshiba Tsunagi TG01
-Toshiba Tsunagi T01A
!!!!!!Important!!!!!!!!!!!:
Please, not write this image for Tsunagi Device, because this image not have a Bootloader section.
If anyone have ideas, how to write this in normal method, then send me PM, i test any method in my Toshiba TG01.
I have a complite Image WP7 for this Device, but not have method upgrade this for All Users.
Download System Image Windows Phone:
flash_image_store_wp7_for_tsunagi
​
If we are ready bootloaer in the device (blue LED).
After pressing the button - Camera and Power:
Flash OS Image in tsunagi_ffu
Maybe this will help someone.
Copyright (c) 2010-2011 UPE Production by Nokser
All Right Reserved.

Search any method upgrade Windows Phone for Tsunagi - Completed!
Search method decode Windows Phone data for Updater. Big Thanks for itsme (c) 2003 Willem Jan Hengeveld - Completed!
Search more method upgrade Windows Phone data for Tsunagi - ...
Search more and more solutions - ...​

Ok.... today, and tomorrow i send first release WP7 Tsunagi for all members, who helped me, though, etc ....
More Info:
UPE Productions - Windows Phone 7

is wp7 flashable?

jonnyhall1bmx1 said:
is wp7 flashable?
Click to expand...
Click to collapse
yep, WP7 work all the time, but I had no method, how to upload it for all userów

can you please upload your wp7 flash image so i can try flash to my tg01

jonnyhall1bmx1 said:
how did you flash it ? are you going to explain your flashing method?
Click to expand...
Click to collapse
lessecro is just a theme for 6.5

ohhhhh haha

Bro u know u can count on me if u need testing! I was trying before with no results. Can u PM me how u did it after all?

I've got a TG01 sat gathering dust if you need any extra testers. I think WP7 would be a big improvement on this phone.

aeroflyluby said:
It's fake and lessecro is just a theme for 6.5
Click to expand...
Click to collapse
hey bro'...
actually i m working on ICS 4.0 theme on WM6.5.x...
Please Stop spam thread like a TROLL !!!
My actual Skin :

Good job man!!
I've read the general info and your method steps in the website and it's a little bit confusing for me at this point.
I'm gonna wait some days for more expert users experience and having more clear info on how to do it.
Thanks again and congratulations for your work!!
PS: Could we update this to WP 7.5 Mango?

Guachiflai said:
Good job man!!
I've read the general info and your method steps in the website and it's a little bit confusing for me at this point.
I'm gonna wait some days for more expert users experience and having more clear info on how to do it.
Thanks again and congratulations for your work!!
PS: Could we update this to WP 7.5 Mango?
Click to expand...
Click to collapse
Perdona sabrias decirme donde puedo bajarme la Rom para El TG01 con windows Phone?

lesscro said:
hey bro'...
actually i m working on ICS 4.0 theme on WM6.5.x...
Please Stop spam thread like a TROLL !!!
My actual Skin :
Click to expand...
Click to collapse
Man, you didn't understand me or this topic.
Nokser pronounced that he booted REAL WP7, not a theme. Your work is theme, perfect theme, but it's not WP7, so you shouldn't attack me for informing people. Right?

Sabria alguin decirme donde puedo bajar la rom para TG01 Windows phone

alex_nano said:
Sabria alguin decirme donde puedo bajar la rom para TG01 Windows phone
Click to expand...
Click to collapse
You can't, there is no Windows Phone rom for TG01
Also, write in english.

If this is WP7 for TG01 thats great, but just as important, is there a way to flash back to Windows Mobile if a user so chooses?

(InsertNameHere) said:
If this is WP7 for TG01 thats great, but just as important, is there a way to flash back to Windows Mobile if a user so chooses?
Click to expand...
Click to collapse
I thing... way is this same, QPST etc... but first we must dump all parts from old system ex. WM6.5 (factory image *.bin)

Nokser said:
I thing... way is this same, QPST etc... but first we must dump all parts from old system ex. WM6.5
Click to expand...
Click to collapse
LOL Why ?

@ Nokser, I have your old WP7_image_flash.bin Can i flash it using your method you posted here?

Related

:: NEW VERSION :: [ALL] [free] WMuVuZelAs 1.2.2350

WMuVuZelAs
Type: free
Description:
Enjoy and participate, you too, in the WorldCu's noise making with this free Vuvuzela for Windows Mobile !
Use:
1. for sound, clic on main picture
2. by clicking again on the main picture, volume will increase (rounding)
3. for options, clic the ball. You will have the choice over 4 vuvuzelas sounds and to set (or not) the soft in fullscreen
4. to leave, hit the red card
Version: 1.2.2350
Last version: 22.06.2010
Editor/Creator: Corwin
Résolutions: WQVGA (240*400) and all upper (autoredim), fit with lower resolutions too
Operating System:
Windows Mobile 6.1.x: oui
Windows Mobile 6.5.0: oui
Windows Mobile 6.5.x: oui
Functional Devices & ROM
Xperia X1 (WM 6.1 stock rom, Switzerland, German)
TG01, custom 6.5.5, german
BiCh0nV3 R: 2.10.50.26 FR ROM on Hd2 (but may not too...)
i900 official 6.1 CH ROM, french Switzerland
htc 3g (chinese clone) wm6.1
Tilt 2, 6.5.5|ROM|WWE|
Samsung Omnia i900L, with cooked 6.5.5 ROM
simvalley XP-25 with win mobile 6.1
HTC HD2, ROM: netDrg 2.5
Doesn't function on
(mainly no sound)
MiriV10 ROM on Hd2
BiCh0nV3 R: 2.10.50.26 FR ROM on Hd2 (but may too...)
Topaz, Tess Prime III WWE
Images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Videos:
http://www.youtube.com/watch?v=Lh44_cC1Ekk
(tx theOne)
Video for smaller screens. You could see that the two last options "Fix Volume" and "FullScreen" are not available
http://www.youtube.com/watch?v=w62fuIkW4DI
Links:
http://www.i900playeraddict.com/corwin.php?soft=evb_wmuvuzelas
Download:
version WITHOUT runtimes eVB (should even be installed)
>> http://www.i900playeraddict.com/ddl/WMuVuZelAs/WMuVuZelAs_n.CAB
Code:
http://www.i900playeraddict.com/ddl/WMuVuZelAs/WMuVuZelAs_n.CAB
version WITH runtimes eVB
>> http://www.i900playeraddict.com/ddl/WMuVuZelAs/WMuVuZelAs.CAB
Code:
http://www.i900playeraddict.com/ddl/WMuVuZelAs/WMuVuZelAs.CAB
Remarks:
- necessary eVB runtime in package
..::-- Présentation réalisée via i900Prez 2.6 --::..
For those people who take the .zip files above, please do NOT forget to write down that the file named WMuVuZelAs_n.zip is the package version WITHOUT runtimes eVB. Those runtime HAVE to be installed for the application to work! I hardly suggest to you to share the WMuVuZelAs.zip file instead, which has all needed runtimes embedded !
added links for downloading... thanks for feedbacks !
ps: graphics are not terrible... I know !
thanks
very good!
but, sound is too low T.T
hmm... you're not the first to tell me that !
I will play with audacity to improve the volume of the wav files for the next release.
Looks great, but I will wait for your next release then
>> New version 1.1.1345
Changelog
1.1.1345
- powerup sounds (LOUDER)
- more sounds
- more options (all sounds and fix volume (without change))
Caution about your HP !
Number of version is in the version.txt file. Last version:
version: 1.1.1345
date: 13:45 17.06.2010
Click to expand...
Click to collapse
.cab files are still the same in the official source:
version SANS/WITHOUT runtimes eVB
>> http://www.i900playeraddict.com/ddl/WMuVuZelAs/WMuVuZelAs_n.CAB
version AVEC/WITH runtimes eVB
>> http://www.i900playeraddict.com/ddl/WMuVuZelAs/WMuVuZelAs.CAB
(same as first post)
Enjoy !
nb: graphics are still not very glossy... but as I have to manage the number of colors, limited to 256, and the autoredim... sorry !
Can't get through the firewall at my work! Any chance of attaching it to this thread! I must have it! thanks.
kev_gordon said:
Can't get through the firewall at my work! Any chance of attaching it to this thread! I must have it! thanks.
Click to expand...
Click to collapse
well... do not do this at your job
anyways... first post edited with the two files embedded in .zip files with the version.txt. Simply extract them and install the .cab you have choosen (with ou without eVB runtimes)
cya
Corwin9S said:
well... do not do this at your job
anyways... first post edited with the two files embedded in .zip files with the version.txt. Simply extract them and install the .cab you have choosen (with ou without eVB runtimes)
cya
Click to expand...
Click to collapse
You're a VERY nice man/woman (sorry, I better not make assumptions!)
I have to find something useful to do at work you know!
Thank you
lol
simply a simple man...
keep in mind : "do something, but it damn GOOD !"
********
Please, post feed-backs for working and unworking mobile (ROM and HW)...
I've found that on some HTC HD2 with cooked WM 6.5.5 there is no sounds, especially for those who hasn't coredpus.dll file.
thanks in advance !
********
Works on my Xperia X1 (WM 6.1 stock rom, Switzerland, German)
Works on TG01, custom 6.5.5, german
Unfortunately I have no sound indeed (using MiriV10 rom on Hd2). Any solution for this?
Corwin9S said:
********
Please, post feed-backs for working and unworking mobile (ROM and HW)...
I've found that on some HTC HD2 with cooked WM 6.5.5 there is no sounds, especially for those who hasn't coredpus.dll file.
thanks in advance !
********
Click to expand...
Click to collapse
htc 3g (chinese clone) wm6.1 works great !!
on my Topaz running Tess Prime III WWE i have no sound
any possible solution?
Works great on the ROM & phone in my sig.....
Works good on my Samsung Omnia i900L, with cooked 6.5.5 ROM.
thanks for feedback
in some ROM, particulary 6.5.5, the sounds will not play. I'm considering tests and debugs for now...
indeed, all .dll used to play sounds are present, but the sounds doesn't play.
I'll see more and take you all in infos asap
lol, Wuwuzela insanity...

[ROM] ffboy wp7 ROM 7740.16 latest OS update MANGO CHS and ENGLISH

Downloadlink ffboy latest wp7 MANGO ROM 7740.16 (Faaaaaaaaaaaast + stable + Faaaaast)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Very usefull as WiFi only device, like Apple iPod, but not as main phone!
still all BUGGS, also from first wp7 ROM build 7510:
- Camera not work
- 3 G not works
- Masive Signal lost dropouts
- no sensor H/V
- no youtube play
new BUGGS in this relase:
- No Market Place entry/ No sign in with a valid Live ID (you can get the activation code on microsoft support)
Whats new
- allready chevron unlocked + prevent the re-lock from ZUNE
- install custom apps from xda or wp7 apps over a alternativ WP7 3Mktplace
- full Mango functionality
- copy+paste functionality
- MULTITASKING for apps + music/radio 3rd apps run in Background
- 9.0 IExplorer with html5 speed
I mean this ROM is a GIGANT step in the right way and MUCH better, userfriendly as the first wp7 ROM
for more info write me a PrivateMessage ..............​
thank you ffboy for re-cooking and update the first alpha wp7 ROM
yooooooooo wat a big step for our tg01 question!!!>>> to update is there a flashable .bin that we flash the same as before via BASE_SOURCE BOOTLOADER folder ?
jonnyhall1bmx1 said:
yooooooooo wat a big step for our tg01 question!!!>>> to update is there a flashable .bin that we flash the same as before via BASE_SOURCE BOOTLOADER folder ?
Click to expand...
Click to collapse
yes the still same wp7 flash method .........
i can't play mp4 video now.the video can play in 7510
macadam911 said:
i can't play mp4 video now.the video can play in 7510
Click to expand...
Click to collapse
yes, i noticed it also! I hope ffboy will update his good work for us, i hope
PS. Downloadlink ffboy latest wp7 MANGO ROM 7740.16 in post 1
(Faaaaaaaaaaaast + stable + Faaaaast)
Is there a hope u can fix the bugs ??? Also congratulations for your job keep going! SORRY FOR MY ENGLISH
Thank you for the great work. You are the man!!
I hope that we can have more perfect version in the future.
kijya said:
Thank you for the great work. You are the man!!
I hope that we can have more perfect version in the future.
Click to expand...
Click to collapse
yeah, all credits and tnx go to ffboy
hi all! you know feropont? the legendary "+ 40 MB more free RAMon tg01" finder for our last tg01 ROMs? I have contact him ....... he will help me/us, please be patient .......
wp7 rom development will rise up. we have good guys the works on better wp7 roms: nokser , qinwengui , ffboy and WojtasXda (i have his 7740 test multilanguage rom!) and possibly feropont and I do little steps in background
anything is possible with them working as a team we will dominate !!! haha
jonnyhall1bmx1 said:
anything is possible with them working as a team we will dominate !!! haha
Click to expand...
Click to collapse
is not really ONE team- is more, more teams .. !!! haha wait, wait i will bring my donate button, online
@about donations, no joke:
I have offer feropont to send and donate him one of my both tg01 devices for a active develop wp7 rom for us. He actually has limited time, but it will be .....
hold on... i don't understand didn't feropont left tg01 development? And you say few teams working on developmebt, what teams? I don't want ti be pessimist but without help from Toshiba we can't make some things to work... Or we can? and my favorit bug the headphones bug won't probably be ever fixed?
nikola92 said:
hold on... i don't understand didn't feropont left tg01 development? And you say few teams working on developmebt, what teams? I don't want ti be pessimist but without help from Toshiba we can't make some things to work... Or we can? and my favorit bug the headphones bug won't probably be ever fixed?
Click to expand...
Click to collapse
yes feropont left the tg01 development and sold his tg01- i like to bring him back and i like to donate one of my tg01- if he will not- he like to help me....
the other teams, such write in above post, yes all the work on wp7, i next time i hope we get a good progress, but is not so easy....... please be patient next weekS
i believe in nothing is impossible. if developers put there mind to it they can achieve anything. it just takes time
+1 true... time is everything. so you say next big update will be next week? hopes are big now if you need testing you have me and my black beast 3
YES, GR8 JOB! It is a big step fordward I just hope that 3g and signal problem will be solved in next release, so I can finaly start using this OS on my phone
how can i flash this rom if i already have wp7 on my tg01, i have 7510....step by step pls
vally4ally said:
how can i flash this rom if i already have wp7 on my tg01, i have 7510....step by step pls
Click to expand...
Click to collapse
here the whole post
how to to flash wp7 rom if you allready on wp7 needed files
step 2 wp7 rom flash.zip
1. DownLoade Modus2: turn device off, then press and hold Camera + Power button (you get Blue led)
2. Install ZTEiT Common downloader and install the acer f1 driver
3. copy a wp7 rom, flash.bin in wp7OS_files
4. run ZTEiT Common downloader (select multi—download), browse to wp7OS_files folder and
select him (check with advanced if the three files are set)
5. press START all and wait 20 - 28 min.
thx miro...

[UPE/OS]★(¯ `•.Windows Phone ® 7.8 for Toshiba Tsunagi[7.10.8858.136][RTM].•´¯)★

[UPE/OS]★(¯ `•.Windows Phone ® 7.8 for Toshiba Tsunagi[7.10.8858.136][RTM].•´¯)★
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
General Informatin Windows Phone ® 7.8 [7.10.8858.136] Image System:
About Info System Windows Phone for Tsunagi:
- Windows Phone: 7.8
- Platform: Tsunagi
- BLDR Version: 7.27.1.0
- Modem: DFP-SDCAOWZM-221001-1
- ROM is based on: Windows ® Phone 7.0 Build 7.10.7510.1268
- Software: Windows ® Phone 7.8
- OS version: 7.10.8858.136
- Firmware revision number: 7.10.8858.136
- Hardware revision number: 112.576.2.0
- Radio software version: 2.2.10.01
- Radio hardware version: 0.0.0.0
- Bootloader version: 7.27.1.0
- Chip SOC version: 0.36.1.2
About Info Supported Devices:
-Toshiba Tsunagi TG01
-Toshiba Tsunagi T01A (Docomo)
-Toshiba Tsunagi X02T (SoftBank)
Add Xap/Oem/Dev. Packages:
-Pkg_FullUnlock - by ultrashot
-Pkg_InteropUnlock - by ultrashot
-PkgOem_AccountManager - by ultrashot
-PkgOem_ActiveSyncName - by ultrashot
-PkgOem_ExeLauncher - by ultrashot
-PkgOem_SearchOverride - by ultrashot
-PkgOem_AccountManagerWorker - by ultrashot
-PkgOem_XapDeployer - by ultrashot
-[XAP]WP7 Root Tools 1.0 - by Heathcliff74 - NEW!
Still Not Re-install New Driver:
-not use new driver in this release edition...
!!!!!!Important!!!!!!!!!!!:
If You don't know How, then no update this System.
Release is example, for testing and have fun. At this moment, not for everyday use, etc...
Everything you do, you do at your own risk.
Download System Image Windows Phone:
- Language: en-US/zh-CN
upe_product_wp7.8_8858.136_tsunagi_rel.1.5
- Language: en-US/de-DE/it-IT/fr-FR
upe_product_wp7.8_8858.136_tsunagi_rel.1.5
- Language: en-US/pl-PL/ru-RU/es-ES
upe_product_wp7.8_8858.136_tsunagi_rel.1.5
Info changelogs this release edition:
Code:
Release(WP7.8_8858.136_tsunagi_rel.1.5):
--Wifi - work!.
--Add Options - Run Download Mode, from position WP Desktop (Press and Hold: Volume UP+Down keys)
--Correct Red Scrap. Screen
--Add New BootLogo Image by LeSscro
--SMS Del./Send(0/+4x/etc) - working in Virgin MO Poland.
--Sensor/Camera/NullPDD/Capture Drivers - not use new driver in this release edition.
--Read MP4/etc - not work!
--Comming Soon...
If you like my work and want keep leaks coming don't hesitate to use my paypal button in signature
Copyright (c) 2013 UPE Product by Nokser
All Right Reserved.
changelogs old release 7.10.8858.136:
Code:
Release(WP7.8_8858.136_tsunagi_rel.1.4):
--Wifi - work(have some bug if we close app).
--Add Options - Run Download Mode, from position WP Desktop (Press and Hold: Volume UP+Down keys)
--Correct Red Scrap. Screen
--Add New BootLogo Image by LeSscro
--SMS Del./Send(0/+4x/etc) - working in Virgin MO Poland.
--Sensor/Camera/NullPDD/Capture Drivers - not use new driver in this release edition.
--Read MP4/etc - not work!
Nokser said:
--Porting New System WP7.8 8858.136 - Done!
--Now correct some bugs..
Click to expand...
Click to collapse
* Thanks for your efforts.
* Waiting for your new upload
Nokser said:
--Porting New System WP7.8 8858.136 - Done!
--Now correct some bugs..
Click to expand...
Click to collapse
wow, great, can't wait for info, about what was fixed, sms, contacts, etc...
cheering, waiting
cheering, waiting
Prosiłbym o polską wersje bardzo Nokser bo głównie na to czekam, a jak dotąd takowa się nie pojawiła.
thanks nokser... great job
you are the best,
I hope i will instal in my toshiba windows 7.8 with the problems fixed (sorry for my english)
want to upgrade
Hi,
first sorry about my english.I still use my tg01 with wm 6.5 and i would like to upgrade to windows 7.I have problems to undertand many things of the forum,there are many forums with upgrades for this device but i dont now witch is the best.
Can somebody help me¿?¿ I just need the link to the rom and the process to upgrade it.
Thanks a lot
Those are based on the methods I tried.
Before you proceed in flashing a WP7 ROM, you should first acquire an external battery charger (they might look like this http://www.kungfubuys.com/media/cat...6e95/u/n/universal_battery_charger_blue-2.jpg). Mine was about $5. You can find them at some electronic shops. The thing is that sometimes when the battery goes down, the only way to recharge it and access your cellphone is by using this external charger. Or at least you can let it charge for a couple of minutes via the external then plug it to the PC via USB, for the rest. I cannot recharge my phone via the USB power adapter...even if the "charging" icon appears on the screen. You should also have the battery 100% charged.
Now you need to install the WP7 bootloader and after that the WP7 ROM.
You need to have the battery charged at 100% (or somewhere there).
! - If you have the bootloader installed and a low battery, the WP7 ROM flashing process may interrupt leaving you in the situation to charge your battery only by the external charger.
1. BOOTLOADER
- Check mirolg's tutorial here http://forum.xda-developers.com/showthread.php?t=1367055 (this tutorial also includes a step-by-step guide on how to flash the WP7 ROM - but you can use Nokser's method of which I'll talk later)
- If you reached step 10 ("Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot"), but have problems finding the port, check my guide here: http://forum.xda-developers.com/showthread.php?p=25380849#post25380849
2. WP7 ROM
- Download a WP7 ROM. Now in order to flash a ROM you will need to have these 3 files: flash.bin, NPRG8650.hex and partition.mbn. These may come when you download the ROM. If the .hex and .mbn is missing, download "tsunagi_ffu" and take them from there. "tsunagi_ffu" http://forum.xda-developers.com/attachment.php?attachmentid=1356932&d=1348687688 (link posted by Nokser)
- You can flash the WP7 rom by either using the method in the mirolg's guide above OR by using Nokser's application ("tsunagi_ffu").
- If you use tsunagi_ffu method: Download "tsunagi_ffu", extract it, copy the WP7 ROM .bin file in the "tsunagi_ffu" folder, turn off the phone, remove the battery, put it back in... After that follow the tuorial here http://www.youtube.com/watch?v=-kbwLnYt64I (at 00:16 you should get a blue light when pressing the camera+power button)
3. 3G FIX
- In his tutorial, mirolg posted a link to a short guide on how to fix the 3G problem you may experience. Here is it http://forum.xda-developers.com/showpost.php?p=20647247&postcount=114
To revert to WM 6.5, check mirolg's tutorial.
Thanks Nokser
:laugh: I'm very glad to see guys like you still working on this device.
I really like my TG01 Phone and it was always disappointing that Toshiba wasn't able to select the best forward looking OS software. They made the most competitive Hardware Device one of the greatest flops of all time. :crying:
I really hope to get it back up to date with your ROM.
thanks MironV for you help,I will read tomorrow again and then i will try
Thanks also to the developer
I am very glad to hear this messege!
Can you give us a chinese ROM?
THANKS!
When you will upload the New win 7.8 build ?
First release this build 8858.136 upload today
Nokser said:
First release this build 8858.136 upload today
Click to expand...
Click to collapse
big business
Thank you very much my friend :good:
pdaimatejam said:
big business
Thank you very much my friend :good:
Click to expand...
Click to collapse
Thank you too, my Bro
And Big Thanks for LeSScro for his work for UPE-Product Design Images
Nokser said:
First release this build 8858.136 upload today
Click to expand...
Click to collapse
Is it coming ? The download link :victory: ?
Nokser said:
First release this build 8858.136 upload today
Click to expand...
Click to collapse
thank you for your hard work. :good:
First release this build 8858.136 - link in first post, this is a only beta/test ROM.
Show that it works!
Have Fun!

[APP][MortScript][Alpha] OSLoader - Android on Windows (Embedded) CE

Yes I know there is Gen.Y DualBOOT out since January, 2010, a bootlauncher application for Windows Mobile. It is not designed to be used with landscape oriented touchscreen devices running Windows (Embedded) CE - as this is the case with many SatNav units. Also, for me, it is not generic enough, ex. drive names where an Android installation is searched for, are hardcoded. Hence I decided to 're-code' this bootloader in MortScript, so that each one can modify the code on the fly, if needed. I named the project 'OSLoader'.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be aware, 'OSLoader' is only a bootlauncher application, so that you still need to provide a suitable Android on your CE device for yourself.
And, as it is with Gen.Y DualBOOT too, actually 'HaRET' is used to boot Android.
Important Note:
Besides the fact you need to provide a suitable Android on your CE device for yourself - the Android distribution that comes with 'OSLoader' only serves demonstration purposes, it doesn't make any sense to try to get Android running on Windows (Embedded) CE via 'HaRET', if you can't obtain a copy of CE's main display driver as named in HKEY_LOCAL_MACHINE\System\GDI\Drivers\MainDisplay, (perhaps using tool 'NDumpCE' by ablbd and renaming this 'ddi.dll' to 'ace_ddi.dll' ) this because 'HaRET' (at least all its current available versions I've used) expects library 'ace_ddi.dll' (a Samsung's main display driver) to be present in device's folder \Windows. Of course 'OSLoader' comes with a 'ace_ddi.dll' replacement...
'OSLoader' is still under development. It may be incomplete, may contain bugs. Please feel free to report any bugs, suggest any improvements.
Downloads: see post #2
Installation Instructions: see post #3
Disclaimer:
THE SOFTWARE AND DOCUMENTATION AND ANY AND ALL UPDATES AND MODIFICATIONS TO THEM ARE LICENSED 'AS IS.' I DO NOT REPRESENT OR WARRANT THAT ERRORS IN THE SOFTWARE OR ITS DOCUMENTATION WILL BE CORRECTED OR THAT THE SOFTWARE WILL RUN ERROR-FREE. THERE ARE NO WARRANTIES COVERING THE SOFTWARE OR DOCUMENTATION, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF DESIGN, MERCHANTABLITY, FITNESS FOR A PARTICULAR PURPOSE, OR AGAINST INFRINGEMENT
Credits:
Mirko Schenk (AKA Mort) -> MortScript [ http://www.sto-helit.de/index.php?lang=en ]
TroNik -> CE-utilities (esp. RegFlushKey.exe)
Daniel Schumann .-> SystemInformation [ http://www.ultimatelaunch.de/index_en.html ]
PLEASE ALWAYS USE THIS THREAD TO POST ISSUES RELATED TO OSLoader, DO NOT PM ME. THANK YOU.
Version history:
2013-08-05 Fixed some typos (thanks to bulldozerecske)
Version 0.0.4 Android-on-CE-DualBoot-0.0.4.zip MD5: 1d73ade6ac8cbc102dc603dfa8d4d66d
2012-12-27 Fixed calculation of RAM needed to run supplied Android port
Version 0.0.3
2012-12-24 Script bugs fixed (thanks to Viper The Ripper)
Version 0.0.2
2012-12-20 Initial release
Version 0.0.1
Kindly remark: Please do NOT mirror 'OSLoader' somewhere else. Thank you.
Installation Instructions:
Unpack .ZIP to root of SD-card. Run <sd-card>\OSLoader\OSLoader.exe
FAQ:
1. How does HaRET work?
As I understand it, the Android port you privide IS NOT A ROM. Hence you copy the Rootfs, Kernel and HaRet to the SD-card and run it. No flashing at all. HaRET unloads Windows (Embedded) CE and starts Android. The internal storage is mounted under Android as a normal partition. After a soft-reset (warm-boot) it returns to Windows (Embedded) CE automatically. So no flashing and no formatting with different filesystem.
2. What is the correct machine type ID for my device?
Honestly I don't know this. AFAIK a generic machine type isn't defined here. If you don't find a valuable identifier please feel free to register your device with http://www.arm.linux.org.uk/developer/machines/ and then use the machine type ID assigned.
hmm gonna give it a try
Awesome! this will work on all devices with windows ce 6.0?
I've looking for running Android on my Toshiba Journe Touch with windows ce 6.0 but I've never found anyone who port Android to this device so I will try you work!
I would like to have Android, whichever (donut, froyo...) would be better than windows ce
jwoegerbauer said:
Installation Instructions:
Unpack .ZIP to root of SD-card. Run <sd-card>\OSLoader\OSLoader.exe
Click to expand...
Click to collapse
dont most car infotainment systems run windows CE. Seems interesting
Wow, nice! Even though I am not a Windows Mobile user, but it's very nice!
Viper The Ripper said:
Awesome! this will work on all devices with windows ce 6.0?
I've looking for running Android on my Toshiba Journe Touch with windows ce 6.0 but I've never found anyone who port Android to this device so I will try you work!
I would like to have Android, whichever (donut, froyo...) would be better than windows ce
Click to expand...
Click to collapse
If you mean 'OSLoader' itself, then the answer is YES. If you mean the applied Android distribution, then the answer is I DON'T KNOW.
jwoegerbauer said:
If you mean 'OSLoader' itself, then the answer is YES. If you mean the applied Android distribution, then the answer is I DON'T KNOW.
Click to expand...
Click to collapse
Didn' t work but great work!
"Missing ')'
Line 95..."
waarffockrnosjahwbfe!!! I need Android on my device, winCE is useless... I can't use flash player! Do you know any way to port android to this device? lol!
It would be awesome if this worked on the dead Zune HD.
FYI:
Found the display driver 'ace_ddi.dll' HaRET stupidly is searching for here:
http://forum.xda-developers.com/showpost.php?p=1190709&postcount=22
HTH
I have a HTC HD "blackstone", I can use this program? in your opinion what is the best way to turn my Blackstone in an android phone?
'OSLoader' is a bootlauncher, not a bootloader, as this is with 'HaRET' which is called by 'OSLoader' to boot Windows (Embedded) CE and/or Windows Mobile in Android.
If you know of
1. an Android port that is compiled for a HTC HD "blackstone", and
2. the machine type identifier that matches your HTC or at least comes closest to it
then you should be able to run Android on top of Windows Mobile using 'OSLoader', IMHO ...
Perhaps this helps you: http://forum.xda-developers.com/forumdisplay.php?f=577
R: [APP][MortScript][Alpha] OSLoader - Android on Windows (Embedded) CE
I want install android to dual boot on My car radio hardstone HS dpm63.....where can i begin from? Is there guide?
Inviato dal mio Xperia S con Tapatalk 2
I'm sure that OS Loader will work on my Device.
jwoegerbauer what do you think about?
Here is my question (also about OS Loader)... http://forum.xda-developers.com/showthread.php?t=2300914
Mich-C said:
I'm sure that OS Loader will work on my Device.
jwoegerbauer what do you think about?
Click to expand...
Click to collapse
Can't confirm OSLoader runs flawlessly on your Toshiba G910 (running Microsoft Windows Mobile 6 Professional). Why not simply try it out? OSLoader affects nothing.
Thanks, I will try
My device will not brick because OS Loader works from the SDcard...
The Android version of your app is the 2.2?
Please continue that project
My 2 din chinese radio with WinCe 6.0 has the arm1136jf-s processor.... where I need to put this information?
Enviado desde mi GT-I9505 usando Tapatalk 2

[UPE/OS]★(¯ `•.Windows Phone ® 7.8 for Toshiba Tsunagi[7.10.8862.144][GEN#1].•´¯)★

[UPE/OS]★(¯ `•.Windows Phone ® 7.8 for Toshiba Tsunagi[7.10.8862.144][GEN#1].•´¯)★
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
General Informatin Windows Phone ® 7.8 [7.10.8862.144] Image System:
About Info System Windows Phone for Tsunagi:
- Windows Phone: 7.8
- Platform: Tsunagi
- BLDR Version: 7.27.1.0
- Modem: DFP-SDCAOWZM-221001-1
- ROM is based on: Windows ® Phone 7.0 Build 7.10.7510.1268
- Software: Windows ® Phone 7.8
- OS version: 7.10.8862.144
- Firmware revision number: 7.10.8862.144
- Hardware revision number: 112.576.2.0
- Radio software version: 2.2.10.01
- Radio hardware version: 0.0.0.0
- Bootloader version: 7.27.1.0
- Chip SOC version: 0.36.1.2
About Info Supported Devices:
-Toshiba Tsunagi TG01
-Toshiba Tsunagi T01A (Docomo)
-Toshiba Tsunagi X02T (SoftBank)
Add Xap/Oem/Dev. Packages:
-Pkg_FullUnlock - by ultrashot
-Pkg_InteropUnlock - by ultrashot
-PkgOem_AccountManager - by ultrashot
-PkgOem_ActiveSyncName - by ultrashot
-PkgOem_ExeLauncher - by ultrashot
-PkgOem_SearchOverride - by ultrashot
-PkgOem_AccountManagerWorker - by ultrashot
-PkgOem_XapDeployer - by ultrashot
-[XAP]WP7 Root Tools 1.0 - by Heathcliff74
-More...
-Remove some dev. apps
Still Not Re-install New Driver:
not use options for all import/export lib. PE mod. in some new drivers.
!!!!!!Important!!!!!!!!!!!:
If You don't know How, then no update this System.
Release is example, for testing and have fun. At this moment, not for everyday use, etc...
Everything you do, you do at your own risk.
Download System Image Windows Phone:
upe_product_wp7.8_8858.136_tsunagi_rel.2.1_gen.test1
Info changelogs this release edition:
Code:
Release(WP7.8_8862.136_tsunagi_rel.2.1):
--Wifi - work!.
--Correct Red Scrap. Screen
--Add New BootLogo Image by LeSscro
--SMS Del./Send(0/+4x/etc) - working in Virgin MO Poland and for some OP.
--Sensor/Camera/NullPDD/Capture Drivers - not use drivers options for all import/export lib. PE mod.
--Read MP4/etc - work!
--System Release its full unlocked!
--Comming Soon...
If you like my work and want keep leaks coming don't hesitate to use my paypal button in signature
Copyright (c) 2013 UPE Product by Nokser
All Right Reserved.
What do you mean by --Sensor/Camera/NullPDD/Capture Drivers - not use drivers options for all import/export lib. PE mod.?
Good work nokser:good:.
i can in this Rom send Files over BT?
bla0258 said:
Good work nokser:good:.
i can in this Rom send Files over BT?
Click to expand...
Click to collapse
yes, you can
maybe have Chinese language?
Can you add German lang.
When will come the Rom ?
Link in first post
Nokser said:
Link in first post
Click to expand...
Click to collapse
Nice work, test it asap:victory:
Tested:
SMS reply: still not work in HK
Thank's Noks!!! You Are The Best!!!
Thank you !!!!!!!!!!!!!!!!!!!
I am going to test it today !!
You are the best !!!
Hourra for Nokser !!!
good work Nokser:good:.
But i can´t download things from marcetplace errorcode :80004005
bla0258 said:
good work Nokser:good:.
But i can´t download things from marcetplace errorcode :80004005
Click to expand...
Click to collapse
I have the same problem...
Same problem... Camera doesn't work... Motion sensor too...
JudgeDreddXDA said:
Same problem... Camera doesn't work... Motion sensor too...
Click to expand...
Click to collapse
Same problems and screen flashing in red...
Problem with signin to a marketplace, by Microsoft Live Account...
HELP for truly noobs
HI everyone, i'm new in all this stuff and i wanted to ask for someone to guide me through the correct way.
To start with, i have just get the Toshiba Tsunagi tg01 with windows phone 6.1
My idea is to upgrade it to WP 7.8 , if the only actual problem is camera i dont mind. (if there is any one else please tell me cuz i use as main phone)
Well, the problem is that i really dont get how to start with.. or wich tuto to follow.
Can i pass from WP 6.5 straight to WP 7.8 ?
wich difference there is betwen RTM Y GEN?
i had read all the wp 7.8 beta/taste post and get some ideas from there...
HOPE NOT HAVE BEEN THAT SILLY AND SORRY FOR MY ENGLISH.
Thank you Nokser!
I installed yesterday and looks promising so far .
You have solved the .mp4 problem, that's awsome!!!
Still showing up the red scrap but after first restart seams to be gone.
I cannot install from marketplace "Error code:c00d2718" and "Error code: 80004005".
The signal is low but I noticed an improvement in the sound quality of conversation. Now is much, much better.
SMS works in Cosmote Romania.
I noticed that we can now enter in camera menu and a black dot it's playing around . Looks promising too.
On previous version we had a double tap option on webpages that focus on zoom in - zoom out, I didn't noticed in this version.
That's all till now.
Best regards
Thankyou!!!!!!
It is especially great that solving MP4 problem!
Youtube works great!!! Bravo...
sometimes my phone reboot in Playing Video (sd Qualität 800*460*) can you repair the Marktplace acsess ?

Categories

Resources