Has anyone tried to use one. Heard the Viewsonic G Tablet can do some. Needing a solution to cable it. Thanks.
Sent from my Desire HD using XDA App
I guess in theory, one of the ones mentioned in this article might work.
In one of my rooms the wifi coverage is very low - so it is tempting to try to get one of them to test.
tried a sabrent one, no luck
dude2k5 said:
tried a sabrent one, no luck
Click to expand...
Click to collapse
Need one that is supported by linux or drivers will for sure be the doom. The question is only wht support has actually been included by Asus.
This thread looked interesting to me, thanks OP.
I have tested some of these before in another project. I found differences in even what was supposed to be the same models, weird stuff. I did find a few models that worked on LINUX, but I will have to dig around to find them.
A good test might be to find a model that quasi *auto detects* and operates on a specific version of LINUX, as a prerequisite, and then test on the dock.
The amount of OS/configuration modifications to *auto detect* should me minimal or none.
Hmm, youll probably need to compile the drivers as modules and manually insert them before it might work. But its worth a shot to just try one first
I should have my hands on the Apple adapter on Tuesday.
Sent from my Desire HD using XDA App
HTCinToronto said:
Has anyone tried to use one. Heard the Viewsonic G Tablet can do some. Needing a solution to cable it. Thanks.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
i got mine working, just follow the instructions from the link below
http://forum.xda-developers.com/showthread.php?p=14747728
It's working! I connected my n900 via usb and set it to network mode.
did netcfg usb1 dhcp and got the address from dhcp.
I wonder why they didn't include ifconfig in android :S
Also, I suspect you can use usb0 (client mode port) to connect to your pc.
Confirm: Connect to LAN using USB to RJ45 on Asus Transformer?
Hi,
I just want to confirm with the previous post that you were able to connect to the internet via LAN using a USB to RJ-45 purchased from amazon. (Search for "USB 2.0 to RJ-45 Ethernet Adapter" on amazon.) Did you connect using the USB port on the dock or on the tablet itself? Thanks!
bambooman said:
Hi,
I just want to confirm with the previous post that you were able to connect to the internet via LAN using a USB to RJ-45 purchased from amazon. (Search for "USB 2.0 to RJ-45 Ethernet Adapter" on amazon.) Did you connect using the USB port on the dock or on the tablet itself? Thanks!
Click to expand...
Click to collapse
Sorry second part of the first sentence confuses me a little. Are you referring to me? I connected to my phone that has usb network mode. And I attached it to a usb port on the dock.
So I picked up the Apple USB-to-ethernet adapter (MC704ZM/A), plugged it in and no response from my Transformer. Did you guys do anything special to get yours working?
Sent from my Desire HD using XDA App
I can confirm that I tried a USB to ethernet adapter (chip seems to be ASIX ax88x72A) and it did not work on my TF. The adapter came with a driver CD and it did include drivers for android. I'm attaching them here in the hope that someone who knows what to do with these files can help.
The driver files can also be found on Asix's website. Google "asix ax88x72A android". Sorry, this board doesn't allow new members to post external links.
I really hope Google or Asus can fix this missing rather fundamental functionality in a future SW update. I don't want to carry a router around and a lot of hotels only have wired internet!
Found Android Drivers
mesquita1 said:
I can confirm that I tried a USB to ethernet adapter (chip seems to be ASIX ax88x72A) and it did not work on my TF. The adapter came with a driver CD and it did include drivers for android. I'm attaching them here in the hope that someone who knows what to do with these files can help.
The driver files can also be found on Asix's website. Google "asix ax88x72A android". Sorry, this board doesn't allow new members to post external links.
I really hope Google or Asus can fix this missing rather fundamental functionality in a future SW update. I don't want to carry a router around and a lot of hotels only have wired internet!
Click to expand...
Click to collapse
Here are some additional drivers from the manufacturer. They clam it includes Android 4.x.x Good luck
http://www.asix.com.tw/FrootAttach/driver/AX88772C_772B_772A_760_772_178_LINUX_Driver_v4.6.0_Source.tar.bz2
Related
Hi,
Anyone know how to connect bluetooth to
O2 XDA? Thanks.
Bluetooth usb adaptor F8T001
Use bluetooth usb adaptor F8T001.
The XDA can only be hooked up as USB slave. Meaning it can only talk to a computer, not to peripherals, such as bluetooth adapters.
What?
That BlueTooth adapter is for adding Bluetooth to a computer with a USB port. That is the Belkin adapter.
That wont work.
IF someone has seen something... Id like to know... but as far as I know its not possible considering the SD slot does not support SD/IO and a serial implementation would be bulky. Furthermore the USB sync connection does not offer USB host which is what is needed to use USB devices. To my knowledge there is only one or two Pocket PCs that have this. The toshiba and one of the Cassiopeias.
BeDammit
YellowTab... the ressurection of BeOS
long usb sync connection
No bluetooth on Xda.
Only option is to use a very long usb sync connection?
bluetooth with usb port?
Hi,
Anyone know if there is such thing as a bluetooth with usb port?
Thank you.
Yes, but it would not help you since the device can only talk to USB-equipped computers, not to USB devices. To use BDSM terminology, it's a 'slave' and not a 'master', and doesn't like reverse roleplay.
I am lost here
I just dont understand why there is no way to use bluetooth on Xda
since you can use a usb sync cable or infrared to synchronised the
xda & desktop pc. Can there be a blue tooth unit at the end of the
usb sync cable that hook up to xda to received the signal from the bluetooth adaptor that connect to the desktop pc usb port. I thought
it is like just cutting the usb sync cable and using sort of wireless
medium to joint their ends. I understand a little bit about xda being a slave device etc but dont understand the part that you cannot use
sort of connections or adaptors etc to transmit signal? Maybe those
guys from bluetooth,SIG, will look into this area. So far as I know
they only have bluetooth to connect pc to printer and keyboard.
Seems like they say something like the OS of xda will not accept
bluetooth etc.. Hope you experts can enlightened me. Thank you.
Yeah, no problem! Go stick a Blutooth adapter on the end of a USB cable........then come back and let us know when you have paired the two devices up.
Hi everybody,
I´m new in here, so please forgive me when I'm asking stupid questions or anything
several things I found out so far :
first of all, of course there is a difference between a USB host and a USB device, as BeDammit pointed out correctly above. To use USB devices, the XDA would need host function instead of its built-in USB slave used for synchronisation. Generally speaking, there are just a few devices offering both host and slave function, since there are only a few USB chips offering both (for the developers: Philips has just launched some new of these chips).
For PDAs with Compact Flash, there is a new solution, which you can check out here : http://www.ratocsystems.com/english/products/subpages/cfu1u.html
(If they'd only had a SD version... :? )
Nevertheless, a synchronisation via bluetooth should still be possible since xda would only be a slave. There are some guys here in Germany offering Bluetooth Headsets via ebay, article number is 3329163765. On this auction's site they say : "don`t keep telling us your xda has no bluetooth; we know that. Therefore you will be delivered an additional bluetooth adaptor " (sic!)
I have not gone further to this so far, for actually I don't have my xda yet... 8) , but maybe this helped you a little further...
<half an hour later : >
I got it ! I got it ! It's made by Toshiba, but compatible. Check it out here :
http://www.csd.toshiba.com/cgi-bin/...pfam=PDA Accessories&poid=209738&Adoid=140389
Interesting
Anyone care to look more closely into this product and give us some feedback? Unfortunately I don't have the skills to do such a thing.
Cheers!
XDAs do not support SDIO cards, only SD memory cards...
(And doing a search in older messages would have revealed this same answer, only about 50 times...)
I have heaRD THAT o2 MAY BE RELEASING AN xda with triband and 64Mb ROM c/w bluetooth. A dealer told me but no word on the net. The XDA 64i apparently.
Anyone else heard that?
E-Ten P700
Yes, I got a reply from the supplier E-Ten who told
me The new device with bluetooth will be call E-Ten P700.
It is similar to O2xda just like their older version P600 series
but this one will have bluetooth. Their P610 has wifi 802.11b.
But the new P700 will only be release Q3. Most probably O2xda
new release might be around the same time. Cheers
Just wanted to touch base to see if there potentially may be any interest in something like this? I have one on the way for review and to see if they even work with our gTab. Rumor was the price point was going to be around $20 - $25.
When I get it tested I will post the findings and see what you guys think!
[EDIT] - so far I can't get it to work. I've tried just throwing it in while it's on as well as having it powered down (like the dock) to allow the DNS to propagate. No dice so far. I'll check with the supplier to see if there is an app to make it work.
it2steve said:
Just wanted to touch base to see if there potentially may be any interest in something like this? I have one on the way for review and to see if they even work with our gTab. Rumor was the price point was going to be around $20 - $25.
When I get it tested I will post the findings and see what you guys think!
Click to expand...
Click to collapse
Interested in outcome but not really looking to buy. WiFi is solid enough and with existing dock if I need LAN (haven't yet) I have it along with the HDMI and other.
Thanks!
When would you use this?
I'm trying to imagine a time it would come in handy. Ideas?
Maybe it uses a kernel module that isn't included in your kernel. I don't know what ROM/kernel you are using (I use stock), but possibly the pl2303 module. If you have a Linux PC handy, you can check for some info. Before plugging it into the Linux box, open a terminal and run this command:
Code:
tail -f /var/log/messages
Then plug it in, and see what it tells you. Use Ctrl + c to end it.
You can also check which modules are loaded with this command, new modules are at the top of the list:
Code:
lsmod
I also am not sure if I would ever use something like that. My ZT-180 came with something similar, but with a miniUSB end, and I have never found the need to even try it.
wasserkapf said:
Maybe it uses a kernel module that isn't included in your kernel. I don't know what ROM/kernel you are using (I use stock), but possibly the pl2303 module. If you have a Linux PC handy, you can check for some info. Before plugging it into the Linux box, open a terminal and run this command:
Code:
tail -f /var/log/messages
Then plug it in, and see what it tells you. Use Ctrl + c to end it.
You can also check which modules are loaded with this command, new modules are at the top of the list:
Code:
lsmod
I also am not sure if I would ever use something like that. My ZT-180 came with something similar, but with a miniUSB end, and I have never found the need to even try it.
Click to expand...
Click to collapse
I have an ubunu VM, I'll give that a try and keep you posted. Thanks!
it2steve said:
I have an ubunu VM, I'll give that a try and keep you posted. Thanks!
Click to expand...
Click to collapse
Where hardware is related, a VM may not give the needed results. That is because a VM may use it's own drivers.
If you have an Ubuntu installation CD, you can boot that as a live CD. It will run only on system memory, so it may be a bit laggy. That will work just like an installed Linux system.
Any progress on this?
I am very interested to find a USB to ethernet adapter for my Gtab. I do a lot of networking with switchs and ISP providers. It would be awesome if this little USB device would work. Any updates?
probably driver related
This looks like one of the adaptors that have been around for the Wii console for a while.
Clemsyn's kernel has a bunch of USB drivers added that are removed (or are back level) in the stock Viewsonic kernel. I suggest that you give it a go.
Pershoot's kernel is a more involved process to select the bits that you want. So I'd start by trying Clemsyn's first.
shieb said:
I'm trying to imagine a time it would come in handy. Ideas?
Click to expand...
Click to collapse
I have a dell laptop that I recently dropped. The wireless stopped working. Thankfully, everything else seems fine. I had to go out and buy a wireless usb adapter.
>>I have a dell laptop that I recently dropped. The wireless stopped working.
Did you pop open the panel on the bottom and check to see if the little wifi riser card didn't just pop out of its slot?
May not apply in your case, but sometimes the Modem/LAN/Wifi is on a little card that plugs into a header on the motherboard. There's usually an access panel on the bottom to get at it - check that it's properly seated and all connectors are secure, etc.
You can also usually swap them out if they die. Check Ebay.
shieb said:
I'm trying to imagine a time it would come in handy. Ideas?
Click to expand...
Click to collapse
I could see this being handy for a road warrier to watch streamed content in a hotel if he or she didn't want to bring the heavier dock along. Often time wifi is sketchy at best in some locations but many hotels were wired with CAT5 to each room and have a cord curled up in the desk. I often break out my CAT5 adapter to string two cords together so my laptop can rest on the bed and I have faster speeds (and frankly a more secure connection with my VPN) while resting against the many pillows. Beats sitting at the desk with the dock propped up.
Let us know how you make out getting this to work.
Anyone get this to work? I just ordered a gtab and it would be great to have a wired ethernet port for configuring many of the network devices I deal with on a daily basis.
sorheim said:
Anyone get this to work? I just ordered a gtab and it would be great to have a wired ethernet port for configuring many of the network devices I deal with on a daily basis.
Click to expand...
Click to collapse
I have not been able ot ge tthe one I have to work. I will contact the supplier to see if there is a particular that the Malata tabs are using
it2steve said:
I have not been able ot ge tthe one I have to work. I will contact the supplier to see if there is a particular that the Malata tabs are using
Click to expand...
Click to collapse
Did you ever try it in Linux, like I suggested?
Not a Linux VM, but a real install of Linux.
it2steve said:
I have not been able ot ge tthe one I have to work. I will contact the supplier to see if there is a particular that the Malata tabs are using
Click to expand...
Click to collapse
Thank you. I would really appreciate it.
You have to edit a file to enable the ethernet.
http://forum.xda-developers.com/showthread.php?t=886853
*Edit* My apologies. This is a fix for the Malata dock w/ethernet. No idea if it works for the adapter or not.
Alternative usb/lan adapter
I found a USB/LAN adapter for android tablets on euogo dot com for $10. Do a search for this item number: TPGA-ULNA
If you do a google search, "usb to lan adapter for android", many other brands / models also appear.
Does anyone think any of them will work with the Gtab?
Considering the rumor that the dock may be discontinued and that an HDMI cable is on the way, a USB/LAN adapter for the Gtab would be easier to carry around than the dock / power adapter combo.
Warning: 1st time poster = NOOB. Pls. be kind.
You may want to check my posts on making Ethernet on the Dock work. If the device works at all, it should be the same process.
http://forum.xda-developers.com/showpost.php?p=14367749&postcount=41
I could use this at work where they won't allow wireless connections.
As network admin, I will definitely love to have opportunity to connect my tablet to LAN network.
Pretty often it happens, that I am installing new WiFi routers, so for initial config, I need to grab my 17" laptop and connect by cable. It would be much more comfortable to just use my tablet ;-)
Hi,
Can anyone tell me if there should be any technical reason why the Flyer cant run on Honeycombe 3.1 and implement the usb host update so I can download jpegs from my dslr using usb.
Many thanks.
It might be worth trying it without honeycomb, I believe that Qualcomm chips have supported USB host since Eclair, perhaps HTC enabled it already?
Has anyone tried it yet?
I'd like to read some gps data from a SD card.
Thanks guys but needed a tablet asap which would also allow me to transfer files from my dslr via usb. Its been confirmed on other forums that the 3.1 update from Motorola will enable this so went with the Zoom
If you just need it for the DSLR have you considered an EyeFI card? For less than $100 you can get a direct connection from the camera to the tablet (or phone).
Dolmangar said:
If you just need it for the DSLR have you considered an EyeFI card? For less than $100 you can get a direct connection from the camera to the tablet (or phone).
Click to expand...
Click to collapse
I know, its a great solution but my D700 only uses CF cards which aren't currently supported.
anpictum said:
I know, its a great solution but my D700 only uses CF cards which aren't currently supported.
Click to expand...
Click to collapse
Yeah I have a D70 that's not supported either. I haven't gone and gotten one for my D60 yet although I've considered it a few times.
USB-host on Flyer
hi guys!
any news on this topic?
as there is already tmp root achieved and permanent root on s-off flyers, has anybody already tried to implement usb host functionality now?
I believe to have heard, that Honeycomb should support USB-host functionality automatically... Do we need to wait for 3.2, or could we get it earlier?
I'd really appreciate this (as I am also owning a DSLR from Canon), and would be willing to donate.
greets, alf.
Sure that the Flyer has the necessary chipset to work as a USB host?
Sent from HTC Flyer using Tapatalk
I'm actually working on a direct DSLR app using USB host, a preview of which should hopefully be released by the end of the week (alpha, not beta).
I'm mentioning this because it works on the Galaxy S2 with 2.3.4. I've not been able to get it to work on the Galaxy S1 with 2.3.4, but it just goes to show, it may not be 100% necessary to be running HC 3.1 to support it (as evidenced by the SGS2).
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
Either way, the chips themselves have supported it for years and years, that's not the issue. Kernel and framework support and such is the problem.
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
alf261173 said:
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
Click to expand...
Click to collapse
Test with a card reader or ext hd (powered) plugged to your cable and see if you get a new drive through a file explorer... The kernel will definitely need to support this functionality, or the fstab may need to be modified.
alf261173 said:
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
Click to expand...
Click to collapse
Indeed if you have a micro usb cable already, connect a usb stick, see if anything happens... that should tell you straight up.
of course I already tried different devices (USB-stick, hard drive, camera directly...), but there was absolutely no reaction ...
simply plugging it in doesn't work.
greets
Then it's probably lacking kernel and/or framework support.
is there a way to fix this with root?
any news on this matter?
Chainfire said:
Then it's probably lacking kernel and/or framework support.
Click to expand...
Click to collapse
Hi Chainfire,
have you looked into the Archos Gen8 range of tablets for any kernel info?
They utilise Froyo and have had USB host since day one. Maybe you could patch something from there?
H.
And what about porting the results for the SGT described here? http://www.xda-developers.com/andro...e-versatile-thanks-to-usb-host-functionality/
I can't wait. A Flyer with notes, the pen and USB host would be an fantastic tool for photography AND for any kind of fieldwork.
If you can take a photo with a proper camera and then check it on a flyer awesome display and use the pen... just imagine!
Sometimes I'm afraid that HTC did not bet enough hard for a fantastic device!
Anyone knows if media pad support usb Ethernet adapter? Thanks!
Sent from my Galaxy Nexus using Tapatalk 2
I'm intrested as well. I think you can try it with an apple adapter(it works with most android devices) or this. I'll buy this tablet if it supports it, because I don't want to pay for wifi in hotels, where the wired connection is free.
Petya19 said:
I'm intrested as well. I think you can try it with an apple adapter(it works with most android devices) or this. I'll buy this tablet if it supports it, because I don't want to pay for wifi in hotels, where the wired connection is free.
Click to expand...
Click to collapse
Good question. Hmm.... I might have to try it. I have a USB-to-Ethernet adapter I bought for my Nintendo Wii. I'll try it out this evening and report back.
luvduchovny said:
Good question. Hmm.... I might have to try it. I have a USB-to-Ethernet adapter I bought for my Nintendo Wii. I'll try it out this evening and report back.
Click to expand...
Click to collapse
Hold on, guys. It's not as easy as you might think....
Huawei "forgot" to include the necessary kernel modules for ethernet adapter support in the build process of the kernel.
So there might be some adapters out there that may be detected by the Mediapad's kernel. But after that you need to set DNS servers manually and that's really awful ...
Currently, I'm in the process of writing a little app that installs appropriate kernel modules for ethernet adapter support, contacts a DHCP server once connected physically to one via a CAT-5 cable and then sets up DNS servers.
However, I'm really slow in writing this little piece of App because I have so many other commitments to follow. I you can patiently wait I gonna post my solution here in a couple of weeks ....
All the best,
DFahren
This is good news, looking forward to what you come up with.I install slot of IP cameras and to set their IP addresses you need to be hardwired before they can be on a system.also work with wireless access points,alarms and more
Sent from my SpringBoard using XDA Premium App
luvduchovny said:
Good question. Hmm.... I might have to try it. I have a USB-to-Ethernet adapter I bought for my Nintendo Wii. I'll try it out this evening and report back.
Click to expand...
Click to collapse
I'm an idiot because my usb to Ethernet adapter isn't a micro-usb to Ethernet. It would be great if it was. In my Viewsonic GTablet days this worked with no problems.
I just saw this on Reddit; might be old news to some, but this is the first I've heard about it. Apparently there is a $1.38 (on Amazon.com) cable that allows you to connect various USB devices, and if the device supports USB OTG, you can run flash or powered hard (not portable) drives, keyboards, mice, or even a hub to use more than one. If the device doesn't, it can be added with root, or included in a ROM. I'm not a developer. I'm not even a programmer, so I don't have the first idea on how this could be done. But a Bluetooth keyboard is around $80, and this will allow a $10 keyboard to be used, or a $10 mouse, for a cost of about $12 for one, $22 for both, plus whatever a hub goes for. So having USB OTG could save some folks a lot of money. Plus if they want to use a USB controller for gaming, they can save the cost of a PS3 controller entirely (about $40).
http://forum.xda-developers.com/showthread.php?t=1240082
Please use the search feature. This is not a development topic because support already exists. I detail everything necessary for USB OTG on the Photon in the link below.
http://forum.xda-developers.com/showpost.php?p=28552795&postcount=2
MODS: This is not a development topic. Please move to Q&A or Accessories. Thanks!
There is a report button. The message goes directly to the Moderator. I would like if someone else would do it too and not only me.
This one is reported already.
peetr_ said:
There is a report button. The message goes directly to the Moderator. I would like if someone else would do it too and not only me.
This one is reported already.
Click to expand...
Click to collapse
Done.
peetr_ said:
There is a report button. The message goes directly to the Moderator. I would like if someone else would do it too and not only me.
This one is reported already.
Click to expand...
Click to collapse
zansatsu said:
Done.
Click to expand...
Click to collapse
Also reported...
Do not spam him. One is enough.
Thanks for the information. Did not know the topic was off limits - noted for future reference. Cheers!
Sent from my MB855 using xda app-developers app
Dark Reality said:
Thanks for the information. Did not know the topic was off limits - noted for future reference. Cheers!
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
After reading my response and the subsequent responses, I realize that it probably came off flame-ish. My apologies. It wasn't so much the topic as it was posted in the dev forum. They frown on that, unfortunately.
I am open to questions if you have any regarding USB OTG. I had to mess around with various USB configurations until I found the right connections. When it works, it just works. But figuring it out from a Youtube video in another language made me want to write a guide. I hope it helps.
Good luck!
Well, I have a USB OTG cable coming at some point in the next week. I only paid 90¢ for it on Amazon, so it's not a huge loss if it doesn't work. I will consult your guide when I get it, if it doesn't just work. Obviously I'm gonna hook it up and try it as soon as I get the package.
I have two devices intended for it -- a 10" mini keyboard I got on Newegg for $15 (shipped). If I can't get this to work at all (and I'm sure I will be able to), I can use the keyboard for our bedroom computer, which has a half-broken, dirty, unwieldy "ergonomic" keyboard hooked up to it (and toss that one). Also a wired Xbox 360 controller, for mobile gaming.
Dark Reality said:
Well, I have a USB OTG cable coming at some point in the next week. I only paid 90¢ for it on Amazon, so it's not a huge loss if it doesn't work. I will consult your guide when I get it, if it doesn't just work. Obviously I'm gonna hook it up and try it as soon as I get the package.
Click to expand...
Click to collapse
The Chainfire program should be able to step you through the diagnostics of it. The biggest trick is getting enough power supplied to the phone plus the devices.
Dark Reality said:
I have two devices intended for it -- a 10" mini keyboard I got on Newegg for $15 (shipped). If I can't get this to work at all (and I'm sure I will be able to), I can use the keyboard for our bedroom computer, which has a half-broken, dirty, unwieldy "ergonomic" keyboard hooked up to it (and toss that one). Also a wired Xbox 360 controller, for mobile gaming.
Click to expand...
Click to collapse
Any device that fully implements the standard USB HID protocol should just plug and play. A wired XBOX 360 controller should work, as well as the keyboard... as long as they don't require proprietary software/drivers to operate properly.
For my gaming solution, I went with the Sixaxis drivers for pairing with a PS3 controller through Bluetooth. That was pretty neat and it works. As far as keyboards, I have a wireless Logitech K400 with a touchpad which is fully functional. Using the one USB dongle which uses Logitech's 'Unifying' technology, I also have a Logitech M570 trackball mouse. So essentially, I carry a pocket-sized computer with me everywhere I go. Who needs a laptop?
Self-Powered USB Hubs work great with this setup, you can have multiple devices and Android (being based on Linux) will handle it as long as the kernel has the drivers built in. I've been having trouble trying to get external storage to work under CM7, but I also haven't been working to figure that out.
zansatsu said:
The Chainfire program should be able to step you through the diagnostics of it. The biggest trick is getting enough power supplied to the phone plus the devices.
Any device that fully implements the standard USB HID protocol should just plug and play. A wired XBOX 360 controller should work, as well as the keyboard... as long as they don't require proprietary software/drivers to operate properly.
For my gaming solution, I went with the Sixaxis drivers for pairing with a PS3 controller through Bluetooth. That was pretty neat and it works. As far as keyboards, I have a wireless Logitech K400 with a touchpad which is fully functional. Using the one USB dongle which uses Logitech's 'Unifying' technology, I also have a Logitech M570 trackball mouse. So essentially, I carry a pocket-sized computer with me everywhere I go. Who needs a laptop?
Self-Powered USB Hubs work great with this setup, you can have multiple devices and Android (being based on Linux) will handle it as long as the kernel has the drivers built in. I've been having trouble trying to get external storage to work under CM7, but I also haven't been working to figure that out.
Click to expand...
Click to collapse
Thanks
Sent from my MB855 using xda premium